Age | Commit message (Collapse) | Author | Files | Lines |
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some concatenated strings are now spaced.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gb_loopback_device::list_op_async is never used except for the
LIST_INIT. The ::list field appears to have a few more uses, but on
closer inspection the linked list of struct gb_loopbacks that it heads
is never used for anything, so there's no reason to maintain it, much
less to keep it sorted.
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's not obvious how the code prevents adding more than 31 elements to
the list and thus invoking undefined behaviour in the 1 << new_lbid
expression, and in practice causing ->lbid values to repeat every 32
elements.
But the definition of struct gb_loopback is local to loopback.c, and the
lbid field is entirely unused outside of this function, so it seems we
can just drop it entirely.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Loopback has its own internal method for tracking and timing out
asynchronous operations however previous patches make it possible to use
functionality provided by operation.c to do this instead. Using the code in
operation.c means we can completely subtract the timer, the work-queue, the
kref and the cringe-worthy 'pending' flag. The completion callback
triggered by operation.c will provide an authoritative result code -
including -ETIMEDOUT for asynchronous operations.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mitch Tasman <tasman@leaflabs.com>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 12927835d211 ("greybus: loopback: Add asynchronous bi-directional
support") does what it says on the tin - namely, adds support for
asynchronous bi-directional loopback operations.
What it neglects to do though is increment the per-connection
gb->iteration_count on an asynchronous operation error. This patch fixes
that omission.
Fixes: 12927835d211 ("greybus: loopback: Add asynchronous bi-directional support")
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reported-by: Mitch Tasman <tasman@leaflabs.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Mitch Tasman <tasman@leaflabs.com>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit d9fb3754ecf8 ("greybus: loopback: Relax locking during loopback
operations") changes the holding of the per-connection mutex to be less
restrictive because at the time of that commit per-connection mutexes were
encapsulated by a per-driver level gb_dev.mutex.
Commit 8e1d6c336d74 ("greybus: loopback: drop bus aggregate calculation")
on the other hand subtracts the driver level gb_dev.mutex but neglects to
move the mutex back to the place it was prior to commit d9fb3754ecf8
("greybus: loopback: Relax locking during loopback operations"), as a
result several members of the per connection struct gb_loopback are racy.
The solution is restoring the old location of mutex_unlock(&gb->mutex) as
it was in commit d9fb3754ecf8 ("greybus: loopback: Relax locking during
loopback operations").
Fixes: 8e1d6c336d74 ("greybus: loopback: drop bus aggregate calculation")
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Mitch Tasman <tasman@leaflabs.com>
Cc: greybus-dev@lists.linaro.org
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver is the only one using the deprecated timeval_to_ns()
helper. Changing it from do_gettimeofday() to ktime_get() makes
the code more efficient, more robust against concurrent
settimeofday(), more accurate and lets us get rid of that helper
in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As of commit 8e1d6c336d74 ("greybus: loopback: drop bus aggregate
calculation"), nothing ever reads from kfifo_ts, so there is no
reason to write to it or even allocate it any more.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify function returns by merging assignment and return.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix "Octal permissions are preffered than symbolic ones" issues.
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a struct timer_list to struct gb_operation and use that to implement
generic operation timeouts.
This simplifies the synchronous operation handling somewhat while also
providing a generic timeout mechanism that drivers can use for
asynchronous operations.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The loopback driver allows the user to set a minimum delay of up to one
second to be inserted between test iterations (i.e. request
submissions). The delay is currently specified in microseconds and is
implemented using udelay.
Busy looping for long periods is not just anti-social; udelay must not
be used for delays longer than a few milliseconds due to the risk of
integer overflow.
Replace the broken udelay with a usleep_range with a 100 us range for
short delays (< 20 ms) and otherwise revert to using msleep.
Fixes: b36f04fa9417 ("greybus: loopback: Convert thread delay to microseconds")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch warnings for parameter type unsigned in greybus.
Note that this patch does not fix all checkpatch warnings for the
affected files.
Signed-off-by: Christian Bewermeyer <christian.bewermeyer@fau.de>
Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following warnings:
braces {} are not necessary for any arm of this statement
Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the greybus-loopback thread logic spins around waiting for
send_count == iteration_max which on real hardware doesn't make a
difference to us but in simulation is excruciatingly slow, anti-social and
bad manners. Use the existing gb_loopback_async_wait_all() function to gate
continuing when the send_count == iteration_max and go to sleep until
there's something worthwhile to-do.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch uses setup_timer function instead of initializing timer with the
function and data fields.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add runtime pm to the loopback driver so that
the module wakes up from suspend while a test
is executed.
Testing Done: Let the module enter standby and
execute a loopback test.
Signed-off-by: Axel Haslam <haslam_axel@projectara.com>
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
The 'gpbridge' name didn't relaly reflect what the bus is; which
is a bus for bridged-phy devices. So, rename all instances
of 'gpbridge' to more appropriate 'gbphy'
Testing Done:
Build and boot tested. 'lsgb' will stop displaying 'GPBridge' devices
until I change the library to reflect this change.
Signed-off-by: Sandeep Patil <patil_sandeep@projectara.com>
Suggested-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Remove the unsupported version request from the loopback-driver request
handler.
Unsupported requests are already handled and logged using the default
case.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently in loopback on the async path we issue an operation and then add
a timer to time-out that operation should it fail to complete. Looking at a
backtrace given in its feasible op_async->pending can be true and
del_timer() can run before add_timer() has run. In the callback handler we
already hold gb->mutex. This patch fixes that potential race by ensuring we
hold gb->mutex both when we are adding and when we are removing the
relevant timer.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-and-tested-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently, when a loopback test completely fail,
loopback will return 4294967295 for every min value.
Return 0 instead of 4294967295 in such case.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
loopback driver use the send_count variable to know the test progress.
The test may be stopped or change but this variable is never cleaned.
Such situation may break the next run.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The original round was removed becaused it was rounding
the integer whereas we had decimals.
Round the sixth decimal.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
gb_loopback_ro_avg_attr() is using "/" to divide two 64-bit integer,
causing a reference to __aeabi_uldivmod() that is not availalbe on 32-bit.
Instead, use do_div().
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Make sure not count errors during asynchronous tests twice (first in
the timeout handler then again in the completion handler) to avoid
obviously broken error stats such as:
$ loopback_test -i 1000 -t transfer -p -o 200000 -c 64 -x -s 2000
1970-1-1 1:3:35
test: transfer
path: gb_loopback0
size: 2000
iterations: 1000
errors: 1998
async: Enabled
requests per-sec: min=0, max=0, average=0.310556, jitter=0
ap-throughput B/s: min=0 max=4026 average=1254.647461 jitter=4026
ap-latency usec: min=12803 max=12803 average=12803.000000 jitter=0
apbridge-latency usec: min=89 max=89 average=89.000000 jitter=0
gpbridge-latency usec: min=294 max=294 average=294.000000 jitter=0
where we supposedly have more errors than iterations (operations
initiated).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently, user space is notified for every message sent,
but this is not really needed and does not work in the async case
where all messages are sent from the start.
Instead, notify userspace only when all the transfers are complete.
This allows userspace to wait in a poll loop and wakeup only when
the test is finished.
Also, don't use the bundle kobj to send the notification it is
the loopback device that contains the loopback attributes.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently, we are adding 0.5 to the average to round the average.
But we are using the remainder to calculate the decimal, so we do not
need to round the average.
In addition, use a u64 type for the remainder to avoid overflow
that might happen when stats->sum value is too big,
usually for requests per seconds and the throughput.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
In addition, update every seconds the min and the max
for throughput and requests per second.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently, in case the case of error, statistics are updated for
asynchronous but not for an asynchronous operation.
Do not update the statistics in the case of error.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
For the async ping transfer, statistics are counted twice,
once after the after the gb_loopback_async_operation() and
once in the callback.
Only keep the one in the callback.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This reverts commit 9b9b046af237f5674c2f7ca991dc62332b2d4041
Bryan wants more feedback first.
Reported-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Convert the legacy loopback protocol driver to a bundle driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Remove the private data field from the bundle structure as it is no
longer needed. Bundle drivers can use the driver data field in the
bundle device.
Update the only current user to use the connection private data until it
has been converted to a bundle driver.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add missing pr_fmt so we can at least tell what module the sole
remaining pr_err was from.
Testing Done:
Tested on DB3.5 with the generic bridge firmware on APB2.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
A specific request from the firmware people is the ability to back-off from
sending more asynchronous operations once a specific number of operations
are in-flight.
This patch adds that ability - with a new sysfs parameter
'outstanding_operations_max' which controls the maximum number of
operations that can be outstanding/in-flight at any time.
When outstanding_operations_max contains a non-zero value and asynchronous
operations are being used - we will back-off until the completion counter
is < outstanding_operations_max. Tested in both synchronous and
asynchronous mode and with gb_loopback_connection_exit() interrupting
in-flight operations.
Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
On gb_loopback_connection_exit() we should ensure every issued asynchronous
operation completes before exiting connection_exit(). This patch introduces
a waitqueue with a counter which represents the number of incomplete
asynchronous operations. When the counter reaches zero connection_exit()
will complete. At the point which we wait for outstanding operations to
complete the connection-specific loopback thread will have ceased to issue
new operations. Tested with both synchronous and asynchronous operations.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
If operation allocation fails we should return -ENOMEM in the asynchronous
operation send routine. If we don't return here then the
gb_loopback_async_operation_put() later can dereference a NULL pointer if
the previous gb_operation_create() failed.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
container_of cannot return NULL and the pointer passed to this context uses
reference counter bumped inside a spinlock, so the base pointer will be
valid at this point.
Suggested-by: Johan Hovold <johan@hovoldconstulting.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Instead of having the loopback attributes in the bundle device,
Add a struct device to the gb_loopback struct and register it on
connection_init, deregister it at connection_exit, and move the
loopback attribute group over to the new device.
Use device_create_with_groups to create sysfs attributes
together with device.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The mask attribute is not used on the driver anymore and can be
removed.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
9445c54c ('greybus/loopback: drop bus aggregate calculation') removed the
aggregation of data in-kernel but instead of dropping the reset of
aggregate stastics, converted that reset into a second reset of the
connection-level stats. While this doesn't result in anything bad it's
also definitely a dumb thing to be doing, so, drop it now.
Also ensure we reset the bridge-specific tracking variables at least once.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently the loopback code allows a delay between operations specified in
milliseconds. Having added asynchronous bi-directional support to loopback
its obvious that the delay value would be far more useful specified in
microseconds than milliseconds. So, this patch makes the necessary
conversion.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
A particular ask from the firmware people for some time now has been the
ability to drive multiple outstanding bi-directional operations from
loopback to loopback Interfaces. This patch implments that change.
The approach taken is to make a call to gb_operation_send() and have
loopback capture the completion callback itself, with a parallel timer to
timeout completion callbacks that take too long. The calling thread will
issue each gb_operation_send() as fast as it can within the constraints of
thread-safety.
In order to support this addition the following new sysfs entries are
created on a per-connection basis.
- async
Zero indicates loopback should use the traditional synchronous model
i.e. gb_operation_request_send_sync().
Non-zero indicates loopback should use the new asynchronous model i.e.
gb_operation_send()
- requests_completed
This value indicates the number of requests successfully completed.
- requests_timedout
This value indicates the number of requests which timed out.
- timeout
The number of microseconds to give an individual asynchronous request
before timing that request out.
- timeout_min
Read-only attribute informs user-space of the minimum allowed timeout.
- timeout_max
Read-only attribute informs user-space of the maximum allowed timeout.
Note requests_completed + requests_timedout should always equal
iteration_max, once iteration_count == iteration_max. Also, at this time we
support either synchronous or asynchronous operations in one set of
transactions.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This patch converts the cross-thread mutex used to synchronize threads with
respect to each other to a spinlock. This is done to enable taking of locks
in the following patches while in atomic context. A small re-order of
locking in connection setup/tear-down is done to minimize the amount of
time spent in spinlock_irqsave().
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Because the width of our fields is already known, we can use %0Nx (for
hex) to print N bytes and %u (for unsigned decimal), instead of using %h
and %hh, which isn't that readable.
This patch makes following changes:
- s/%hx/%04x
- s/%04hx/%04x
- s/%hhx/%02x
- s/%02hhx/%02x
- s/%hhu/%u
- s/%hu/%u
- s/%x/%02x for u8 value (only at a single place)
Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
At some point we had a statement in a Jira work item to pull out 'bus
level' data from greybus and to have messages to different interfaces be
synchronized with respect to each other. Synchronizing threads with respect
to each other is slow and it turns out we can get the same 'bus level'
stastics by making the user-space test application smarter.
That's great news for the in-kernel code since it means we can cut out a
whole lot of code to-do with calculating 'bus level' aggregate data and we
can stop forcing threads to hit a rendezvous before sending out another
loopback operation.
So this patch drops bus level aggregates in favour of doing that in
user-space. It subtracts a lot of code and cycles that in practice nobody
cares about anyway.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|