Age | Commit message (Collapse) | Author | Files | Lines |
|
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While the timesync protocol was a great idea, it never ended up getting
implemented by any known hardware devices. It's also a bit
"interesting" in how it ties into the platform controller.
So, just remove it for now. It's not needed, no one uses it, and it's a
stumbling block in getting the greybus core code merged out of the
staging tree. If anyone wants it in the future, reverting this patch is
a great place to start from.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, AP performs unipro_reset if SVC fails to response to its
ping. While this error recovery is best suited for the end-user
experience, errors in the UniPro network could potentially go unnoticed
by the QA and fishfooders in the development phase of the project. This
patch adds an option to trigger a kernel panic so logs can be collected
for analysis.
Testing Done:
- Reproduce issue and observe kernel panic when
watchdob_control is changed to 'panic'
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Connection tear down is being reworked, and the SVC quiescing operation
is going away.
Let's remove this operation now along with the coupled second ping from
our intermediate tear down implementation.
This both avoids unnecessary noise in the logs resulting from the fact
that the SVC side of the quiescing operation was never merged, and
speeds up connection tear down slightly.
Testing done: Tested on EVT2 using runtime PM.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Due to when using set_power_mode to hibernate a link, it won't trigger a
POWERMODEIND event, hence the hard-coded GB_SVC_SETPWRM_PWR_OK would be
returned and it should also be considered as successful result code for
link hibernation. Therefore, adding this set_power_mode_hibernate
function to separate the two calls in order to check with the correct
result code.
Testing Done:
- Suspend an Interface and observe no set power mode error.
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
Add the AP implementation for the Greybus SVC Interface Resume
Operation. This operation allows the AP to request the SVC to resume an
Interface which was previously SUSPENDED, allowing it to later be
ENUMERATED.
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
The input device was added before to handle the key(s) connected
directly to SVC, which is not the case anymore. So, this change removes
the gb_svc_key_event() operation and the corresponding input device
code with it.
Testing Done:
Boot tested and tried module insert/removal through AraManager
Change-Id: Iaa541d4aefb5c0ed16caaa39450029de35d7c228
Signed-off-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Bring the gb_svc_intf_set_power_mode() up-to-date with the current Greybus
specification. This largely involves adding more members to the structure
sent across the wire. Also change the camera code to use the new
operation properly, with default values passed for the new necessary
arguments. The correctness of these default values is confirmed via testing
and by asking Rob Johnson.
We must make sure to zero the request structure sent across the wire, lest
bite us most cruelly, and we fix by changing the Set Power Mode
Response structure to use a __u8 rather than a __le16.
Testing Done: Took a picture with a camera module, received error code
when passing deliberately incorrect values for new parameters, got proper
-EIO and Greybus result code printed when operation stopped halfway
through. Could induce error by initializing request struct with random
nonsense, and can stop it by initializing request struct with zeroes.
Associated Firmware Changes: 1669-1671 on Android N Gerrit for SW-2945
Signed-off-by: Eli Sennesh <esennesh@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add stubbed out connection-quiescing operation that is needed for proper
connection tear down.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This reverts commit 29fee8c55b59bb6ac59b99a0563c89c514cba42b.
This change and its companion NuttX changes seem to be triggering a
storm of POWERMODEIND switch interrupts on the SVC.
Signed-off-by: Jeffrey Carlyle <jcarlyle@google.com>
Acked-by: Sandeep Patil <sspatil@google.com>
|
|
Bring the gb_svc_intf_set_power_mode() up-to-date with the current Greybus
specification. This largely involves adding more members to the structure
sent across the wire. Also change the camera code to use the new
operation properly, with default values passed for the new necessary
arguments. The correctness of these default values is confirmed via testing
and by asking Rob Johnson.
Testing Done: Took a picture with a camera module, received error code
when passing deliberately incorrect values for new parameters, got proper
-EIO and Greybus result code printed when operation stopped halfway
through.
Associated Firmware Changes: 6810-6812 on Gerrit for SW-1239, 6870 and
5612-5613 on Gerrit for SW-2945
Signed-off-by: Eli Sennesh <esennesh@leaflabs.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Simple addition of the TimeSync commands defined in the specification.
Adds:
- svc.c::timesync_enable(u8 count, u64 frame_time, u32 strobe_delay,
u32 refclk)
Commands the SVC to initiate count TimeSync strobe pulses with
strobe_delay microseconds delay between each strobe to the specified
bit-mask of Interface IDs indicated in a previous
timesync_wake_pins_acquire command. The frame_time parameter indicates
the initial time the SVC should base the first strobe from. The refclk
parameter indicates the APs clock rate, the SVC should ensure its own
clock ticks at this rate. Once enabled the SVC may not enter a low-power
mode which will result in the reference timer used to track time
switching off. The SVC will capture the authoritative FrameTime at each
strobe and store these values for later propagation to the AP with the
timesync_authoritative request.
- svc.c::timesync_disable(void)
Commands the SVC to immediately halt TimeSync logic. This will allow
the SVC to transition into low-power modes where the reference timer
being used for TimeSync may switch off.
- svc.c::timesync_authoritative(u64 *frame_time)
Used by the AP Module to ask the SVC for the authoritative FrameTime
as captured at each TimeSync strobe.
- svc.c::timesync_ping(u64 *frame_time)
Used by the AP Module to command the SVC to initiate a single strobe on
a specified bit-mask of Interface IDs communicated in a previous
timesync_wake_pins_acquire command. SVC will latch the FrameTime on the
rising edge of the outbound pulse and will return the FrameTime to the
AP Module in the response phase of the greybus transaction.
- svc::timesync_wake_pins_acquire(u32 strobe_mask)
Used by the AP to tell the SVC to set a bit-mask of wake lines associated
with a bit-mask of Interface IDs to a known initial state prior to the
SVC generating a TimeSync related pulse such as timesync-enable or
timesync-ping.
- svc::timesync_wake_pins_release(void)
Used by the AP to tell the SVC to release all wake-detect lines in the
timesync active state as previously specified in the
timesync_wake_pins_acquire operation.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The power rail names and counts are unnecessarily stored in the gb_svc
structure once the SVC created, this causes waste of memory usage. This
patch removes rail names and rail counts storage from th gb_svc
structure.
Testing Done:
- Validated the readings from /d/greybus/1-svc/pwrmon/*
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add message structures (based on the current spec) for the SVC Interface
Activate operation, and a stub function that always return the Greybus
interface type.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add stub functions for v_sys, refclk and unipro resource management.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This change adds the AP Power Monitor functions to
read out all the rails power information monitored by
the SVC.
Testing Done:
- $ cat /d/greybus/1-svc/pwrmon/*/*
and validate the output with the svc stub power
monitor functions
- $ tree /d/greybus/1-svc/pwrmon
| | | |---pwrmon
| | | | |---DUMMY_RAIL_1
| | | | | |---current_now
| | | | | |---power_now
| | | | | |---voltage_now
| | | | |---DUMMY_RAIL_2
| | | | | |---current_now
| | | | | |---power_now
| | | | | |---voltage_now
| | | | |---DUMMY_RAIL_3
| | | | | |---current_now
| | | | | |---power_now
| | | | | |---voltage_now
| | | | |---DUMMY_RAIL_4
| | | | | |---current_now
| | | | | |---power_now
| | | | | |---voltage_now
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This change implements the AP Power Monitor functions for obtaining
current/voltage/power on a specific rail of an Interface.
Testing Done:
$ cat /sys/bus/greybus/devices/1-3/current_now
103
$ cat /sys/bus/greybus/devices/1-3/power_now
303
$ cat /sys/bus/greybus/devices/1-3/voltage_now
203
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This reverts commit a1d8f2c3856804ed26157104bb203edf4c882a6c.
|
|
Added a sysfs entry called pwr_off. When a "1" is passed to it,
it sends a GB_SVC_TYPE_PWR_DOWN command to the SVC, powering it down
along with the switch and INA231 chips.
Testing Done: Tested on EVT1_5, works.
Signed-off-by: Georgi Dobrev <dobrev_georgi@projectara.com>
|
|
Creating and destroying a route to an interface is arguably an interface
operation and belongs with the interface code.
Add new interface_activate and interface_deactivate helpers that will be
used to activate and deactivate an interface in the new interface boot
sequence.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Use tabs to indent CPort-flag values.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Remove unused, bogus interface-reset helper.
The interface-reset operation is initiated by the SVC, not the AP.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Fix two greybus container-of macros that used the pointer name for the
member.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Generalise the svc connection-create helper to accept a cport-flags
argument and handle the flags in the connection code instead.
Note that the camera driver currently manages its data connection
directly. We keep E2EFC enabled for now even though it will soon need
to be disabled due to some pending firmware updates.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Sometimes you want to disable the SVC watchdog without having to patch
your kernel, so provide a sysfs file to do this. This can let us do
power measurements, and let the firmware developers not go crazy
worrying that the kernel is going to reset their chips with no notice.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Now that we have a svc ping command, let's add a watchdog to call it
every so often (1 second at the moment.) If it finds something went
wrong, post a stern message to the kernel log and call:
start unipro_reset
to reset the whole greybus hardware subsystem.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This implements the SVC "ping" command. It's tiny and simple, but we
need something like this in order for us to "know" if all is working
well.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add a new input device associated with the SVC to handle key events.
This new events are transfer over a new greybus svc operation which is
unidirectional.
It was selected the KEY_A for representing the KEY_ARA_BUTTON key code.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Store the "negotiated" protocol version to use in the svc state
struct instead of the connection struct.
The generic concept of a connection version is going away in favour of
bundle-class versions.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add a new svc operation which will be used to send a request to eject a
given interface.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
|
|
The link config operation was a hack only designed to fulfill the camera
driver's needs. Now that a standard operation is defined for the same
purpose, implement it and remove the hack.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Create svc device along with host-device and move the svc-connection to
the svc structure.
The svc connection is enabled when registering the host device, but as
the SVC protocol is currently driven by the SVC, we need to defer
registration of the svc device to the connection request handler.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add the bus id to all greybus uevents.
This is needed to identify devices that are being removed (e.g. at
hot-unplug).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Fix racy hotplug handling by serialising all processing of hot-plug and
unplug requests using a single-threaded dedicated workqueue.
This fixes a reported crash during enumeration when processing multiple
events.
The current svc implementation does not handle concurrency at all (e.g.
no interface list lock or refcounting) so we need to use the big hammer
for now.
Note that we will eventually want to process events for different
interfaces in parallel, but that we'd still need a workqueue in order
not to starve other svc requests (e.g. for timesync).
Reported-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Create the svc connection when registering the host-device and
remove the current svc connection hacks that "upgraded" the svc
connection once the endo id and ap interface id was known.
Note that the old implementation was partly based on a misunderstanding
as it was the remote interface id, rather than the local AP interface id,
that used to define a connection (but we also needed the endo_id).
The remote interface is no longer needed as static connections, such as
the svc connection, are now simply defined by the host-device and host
cport id.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Move endo_id and AP interface id to the svc device.
The endo abstraction is about to be removed, and these attributes are
arguable attributes of the svc anyway.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Register the svc device upon reception of the HELLO request.
The SVC HELLO request contains the endo id and AP interface id, which
will be exposed from the svc device rather than the endo.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Rename host-device structure gb_host_device to match our other
structures.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
We need to skip setting E2EFC and other flags to the SVC connection
create request, for all cports, on an interface that need to boot over
unipro, i.e. interfaces required to download firmware.
This also adds a FIXME as we need to do it differently for ES3.
Tested-by: Eli Sennesh <esennesh@leaflabs.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off by: Eli Sennesh <esennesh@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
These are required to get/set DME attributes of the modules. This is
implemented based on the greybus specifications.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
There are no external users of these, and probably would never be. Make
them static.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
|
|
These routines are responsible to destroy a connection that is going
away, the return value is of no use. At best, print an error message to
show that we got an error.
Make their return type void.
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
|
|
Its not updated/used anymore, remove it. Also move back the struct
gb_svc to svc.c as its not referenced by external users anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
SVC connection is required before the AP knows its position on the endo
and type of endo. To enable message processing between the AP and SVC at
this time, we need a partially initialized connection which can handle
these messages.
Once the AP receives more information from the SVC, it can discard this
partially initialized connection and create a proper one, tied to a
bundle and interface.
Destroying the partially initialized connection is a bit tricky, as it
is required to send a response to svc-hello. That part will be properly
fixed separately.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Its another special protocol (just like control protocol) and is
required to be accessed from other files, lets save a pointer to it in
interface structure.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Its an essential part of greybus core and shouldn't be present as a
separate module. Make it part of greybus.ko module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This patch adds support for the Greybus SVC protocol. We may want
to rearrange protocol numbers at some point, since this is a pretty
fundamental protocol.
Note: It has only been compile tested; no SVC CPorts have yet been
defined, so this code is not yet exercised.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|