aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/iio/magnetometer (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-04-02iio:magnetometer:ak8975 move driver out of stagingJonathan Cameron3-497/+0
Issues raised in last series to propose this have now been resolved so there should be no reason this driver cannot graduate from staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-04-02staging:iio:magnetometer:ak8975 use standard i2c_smbus read functions.Jonathan Cameron1-49/+17
Now the mysterious NOSTART flag is gone from the read, we can use the i2c_smbus_read_byte/word/i2c_block_data functions instead of the local reimplementation of these standard functions. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-04-02staging:iio:magnetometer:ak8975 drop I2C_M_NOSTART flag in read_dataJonathan Cameron1-1/+0
This flag makes no sense whatsoever where it is. Documentation/i2c/i2c-protocol states: If you set the I2C_M_NOSTART variable for the first partial message, we do not generate Addr, but we do generate the startbit S. This will probably confuse all other clients on your bus, so don't try this. This is exactly what is going on here. Likelihood given that the driver never checked for this protocol mangling being available is that it wasn't present on the test boards and hence this flag was simply ignored. No indication of why it would be necessary has been found in the datasheets. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-04-02staging:iio:magnetometer:ak8975 drop unused eoc_irqJonathan Cameron1-2/+0
Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
2013-03-17staging:iio:magnetometer:hmc5843 move to info_mask_(shared_by_type/separate)Jonathan Cameron1-2/+2
The original info_mask is going away in favour of the broken out versions. Signed-off-by: Jonathan Cameron <jic23@kernel.org> cc: Shubhrajyoti D <shubhrajyoti@ti.com>
2013-03-17staging:iio:mag:ak8975 move to info_mask_(shared_by_type/separate)Jonathan Cameron1-2/+2
The original info_mask is going away in favour of the broken out versions. Signed-off-by: Jonathan Cameron <jic23@kernel.org> cc: Andrew Chew <achew@nvidia.com>
2012-11-21staging: iio: remove use of __devexit_pBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21staging: iio: remove use of __devexitBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21staging: iio: remove use of __devinitBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-19drivers/staging/iio: Remove unnecessary semicolonPeter Senna Tschudin1-1/+1
A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-03staging:iio: Update email address for Jonathan Cameron.Jonathan Cameron1-1/+1
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-06-07staging:iio:magnetometer:ak8975: remove 'mode' attributeLeed Aguilar1-73/+0
The raw data reading process (ak8975_read_axis) sets the single measurement mode to take a sample and once the conversion is completed the device enters into power-down mode automatically, therefore there is no need to enable a flag for this to happen. Signed-off-by: Leed Aguilar <leed.aguilar@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-07staging:iio:magnetometer:ak8975: use gpio_request_one apiLeed Aguilar2-10/+2
Use gpio_request_one api, it looks cleaner. Signed-off-by: Leed Aguilar <leed.aguilar@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-07staging:iio:magnetometer:ak8975: set power-down mode after reading fuse ROM dataLeed Aguilar1-0/+11
Fuse ROM data access mode is the only mode which does not transition to power-down mode automatically. As per the AK8975 data sheet, it is recomended to set the power-down mode first before attempting to change into another mode. Signed-off-by: Leed Aguilar <leed.aguilar@ti.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-05staging: iio: ak8975: Make it behave better as modulesShubhrajyoti D1-2/+2
The memory regions of the probe and remove are move to __devinit and __devexit respectively. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-05staging: iio: hmc5843: Make it behave better as modulesShubhrajyoti D1-3/+3
The memory regions of the probe and remove are move to __devinit and __devexit respectively. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17staging: iio: add support for hmc5883/hmc5883l to hmc5843 magnetometer driverPeter Meerwald2-45/+149
v3 addresses review comments: * rotate tables (Jonathan Cameron) * remove trailing space, add newline in sysfs output (Jonathan Cameron) * split out patch for reorganization of hmc5843_set_rate() (Jonathan Cameron) * use static table to describe chip variants (Jonathan Cameron) v2 addresses review comments: * fixes and cleanups have been split out (Jonathan Cameron) * constants are generally prefixed HMC5843_, except when related specifically to hmc5883 (Jonathan Cameron) * simplify code and avoid temp buffer in hmc5843_show_sampling_frequencies_available() (Lars-Peter Clausen) * use sysfs_streq() instead of strncmp()/strlen() in hmc5843_check_sampling_frequency() (Lars-Peter Clausen) Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17staging: iio: reorganize hmc5843_set_rate()Peter Meerwald1-1/+2
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17staging: iio: rename function/data to consistently start with hmc5843_Peter Meerwald1-13/+13
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17staging: iio: cleanup and move comments in hmc5843Peter Meerwald1-59/+63
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17staging: iio: add check for measurement configuration value passed to hmc5843Peter Meerwald1-1/+6
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17staging: iio: rework sampling rate setting in hmc5843Peter Meerwald1-27/+24
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16staging: iio: rename and prefix CONSTANTs to distinguish between HMC5843 and HMC5883Peter Meerwald1-57/+71
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16staging: iio: change strict_strtoul() to kstrtoul() in hmc5843Peter Meerwald1-3/+3
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16staging: iio: fix access to hmc5843 private dataPeter Meerwald1-5/+11
i2c_get_clientdata(client) points to iio_dev, not hmc5843_data; fixes issue similar to 62d2feb9803f18c4e3c8a1a2c7e30a54df8a1d72 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14staging:iio:magnetometer: Use dev_to_iio_dev()Lars-Peter Clausen2-10/+10
Replace open-coded instances of getting a iio_dev struct from a device struct with dev_to_iio_dev(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02Merge 3.4-rc5 into staging-nextGreg Kroah-Hartman2-14/+16
This resolves the conflict in: drivers/staging/vt6656/ioctl.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29staging:iio: Streamline API function namingLars-Peter Clausen2-6/+6
Currently we use two different naming schemes in the IIO API, iio_verb_object and iio_object_verb. E.g iio_device_register and iio_allocate_device. This patches renames instances of the later to the former. The patch also renames allocate to alloc as this seems to be the preferred form throughout the kernel. In particular the following renames are performed by the patch: iio_put_device -> iio_device_put iio_allocate_device -> iio_device_alloc iio_free_device -> iio_device_free iio_get_trigger -> iio_trigger_get iio_put_trigger -> iio_trigger_put iio_allocate_trigger -> iio_trigger_alloc iio_free_trigger -> iio_trigger_free The conversion was done with the following coccinelle patch with manual fixes to comments and documentation. <smpl> @@ @@ -iio_put_device +iio_device_put @@ @@ -iio_allocate_device +iio_device_alloc @@ @@ -iio_free_device +iio_device_free @@ @@ -iio_get_trigger +iio_trigger_get @@ @@ -iio_put_trigger +iio_trigger_put @@ @@ -iio_allocate_trigger +iio_trigger_alloc @@ @@ -iio_free_trigger +iio_trigger_free </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25IIO: Move core headers to include/linux/iioJonathan Cameron2-4/+4
Step 1 in moving the IIO core out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18staging:iio:magnetometer Add IIO_CHAN_INFO_RAW entries to all drivers.Jonathan Cameron2-4/+6
Precursor to making value read / write attribute optional. No processed values for magnetometers. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-12staging: iio: hmc5843: Fix crash in probe function.Marek Belisko1-1/+3
Fix crash after issuing: echo hmc5843 0x1e > /sys/class/i2c-dev/i2c-2/device/new_device [ 37.180999] device: '2-001e': device_add [ 37.188293] bus: 'i2c': add device 2-001e [ 37.194549] PM: Adding info for i2c:2-001e [ 37.200958] bus: 'i2c': driver_probe_device: matched device 2-001e with driver hmc5843 [ 37.210815] bus: 'i2c': really_probe: probing driver hmc5843 with device 2-001e [ 37.224884] HMC5843 initialized [ 37.228759] ------------[ cut here ]------------ [ 37.233612] kernel BUG at mm/slab.c:505! [ 37.237701] Internal error: Oops - BUG: 0 [#1] PREEMPT [ 37.243103] Modules linked in: [ 37.246337] CPU: 0 Not tainted (3.3.1-gta04+ #28) [ 37.251647] PC is at kfree+0x84/0x144 [ 37.255493] LR is at kfree+0x20/0x144 [ 37.259338] pc : [<c00b408c>] lr : [<c00b4028>] psr: 40000093 [ 37.259368] sp : de249cd8 ip : 0000000c fp : 00000090 [ 37.271362] r10: 0000000a r9 : de229eac r8 : c0236274 [ 37.276855] r7 : c09d6490 r6 : a0000013 r5 : de229c00 r4 : de229c10 [ 37.283691] r3 : c0f00218 r2 : 00000400 r1 : c0eea000 r0 : c00b4028 [ 37.290527] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 37.298095] Control: 10c5387d Table: 9e1d0019 DAC: 00000015 [ 37.304107] Process sh (pid: 91, stack limit = 0xde2482f0) [ 37.309844] Stack: (0xde249cd8 to 0xde24a000) [ 37.314422] 9cc0: de229c10 de229c00 [ 37.322998] 9ce0: de229c10 ffffffea 00000005 c0236274 de140a80 c00b4798 dec00080 de140a80 [ 37.331573] 9d00: c032f37c dec00080 000080d0 00000001 de229c00 de229c10 c048d578 00000005 [ 37.340148] 9d20: de229eac 0000000a 00000090 c032fa40 00000001 00000000 00000001 de229c10 [ 37.348724] 9d40: de229eac 00000029 c075b558 00000001 00000003 00000004 de229c10 c048d594 [ 37.357299] 9d60: 00000000 60000013 00000018 205b0007 37332020 3432322e 5d343838 c0060020 [ 37.365905] 9d80: de251600 00000001 00000000 de251600 00000001 c0065a84 de229c00 de229c48 [ 37.374481] 9da0: 00000006 0048d62c de229c38 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.383056] 9dc0: 00000000 c048d62c 00000000 de229c00 de229c00 de1f6c00 de1f6c20 00000001 [ 37.391632] 9de0: 00000000 c048d62c 00000000 c0330164 00000000 de1f6c20 c048d62c de1f6c00 [ 37.400207] 9e00: c0330078 de1f6c04 c078d714 de189b58 00000000 c02ccfd8 de1f6c20 c0795f40 [ 37.408782] 9e20: c0238330 00000000 00000000 c02381a8 de1b9fc0 de1f6c20 de1f6c20 de249e48 [ 37.417358] 9e40: c0238330 c0236bb0 decdbed8 de7d0f14 de1f6c20 de1f6c20 de1f6c54 de1f6c20 [ 37.425933] 9e60: 00000000 c0238030 de1f6c20 c078d7bc de1f6c20 c02377ec de1f6c20 de1f6c28 [ 37.434509] 9e80: dee64cb0 c0236138 c047c554 de189b58 00000000 c004b45c de1f6c20 de1f6cd8 [ 37.443084] 9ea0: c0edfa6c de1f6c00 dee64c68 de1f6c04 de1f6c20 dee64cb8 c047c554 de189b58 [ 37.451690] 9ec0: 00000000 c02cd634 dee64c68 de249ef4 de23b008 dee64cb0 0000000d de23b000 [ 37.460266] 9ee0: de23b007 c02cd78c 00000002 00000000 00000000 35636d68 00333438 00000000 [ 37.468841] 9f00: 00000000 00000000 001e0000 00000000 00000000 00000000 00000000 0a10cec0 [ 37.477416] 9f20: 00000002 de249f80 0000000d dee62990 de189b40 c0234d88 0000000d c010c354 [ 37.485992] 9f40: 0000000d de210f28 000acc88 de249f80 0000000d de248000 00000000 c00b7bf8 [ 37.494567] 9f60: de210f28 000acc88 de210f28 000acc88 00000000 00000000 0000000d c00b7ed8 [ 37.503143] 9f80: 00000000 00000000 0000000d 00000000 0007fa28 0000000d 000acc88 00000004 [ 37.511718] 9fa0: c000e544 c000e380 0007fa28 0000000d 00000001 000acc88 0000000d 00000000 [ 37.520294] 9fc0: 0007fa28 0000000d 000acc88 00000004 00000001 00000020 00000002 00000000 [ 37.528869] 9fe0: 00000000 beab8624 0000ea05 b6eaebac 600d0010 00000001 00000000 00000000 [ 37.537475] [<c00b408c>] (kfree+0x84/0x144) from [<c0236274>] (device_add+0x530/0x57c) [ 37.545806] [<c0236274>] (device_add+0x530/0x57c) from [<c032fa40>] (iio_device_register+0x8c8/0x990) [ 37.555480] [<c032fa40>] (iio_device_register+0x8c8/0x990) from [<c0330164>] (hmc5843_probe+0xec/0x114) [ 37.565338] [<c0330164>] (hmc5843_probe+0xec/0x114) from [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) [ 37.574737] [<c02ccfd8>] (i2c_device_probe+0xc4/0xf8) from [<c02381a8>] (driver_probe_device+0x118/0x218) [ 37.584777] [<c02381a8>] (driver_probe_device+0x118/0x218) from [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) [ 37.594818] [<c0236bb0>] (bus_for_each_drv+0x4c/0x84) from [<c0238030>] (device_attach+0x78/0xa4) [ 37.604125] [<c0238030>] (device_attach+0x78/0xa4) from [<c02377ec>] (bus_probe_device+0x28/0x9c) [ 37.613433] [<c02377ec>] (bus_probe_device+0x28/0x9c) from [<c0236138>] (device_add+0x3f4/0x57c) [ 37.622650] [<c0236138>] (device_add+0x3f4/0x57c) from [<c02cd634>] (i2c_new_device+0xf8/0x19c) [ 37.631805] [<c02cd634>] (i2c_new_device+0xf8/0x19c) from [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) [ 37.641754] [<c02cd78c>] (i2c_sysfs_new_device+0xb4/0x130) from [<c0234d88>] (dev_attr_store+0x18/0x24) [ 37.651611] [<c0234d88>] (dev_attr_store+0x18/0x24) from [<c010c354>] (sysfs_write_file+0x10c/0x140) [ 37.661193] [<c010c354>] (sysfs_write_file+0x10c/0x140) from [<c00b7bf8>] (vfs_write+0xb0/0x178) [ 37.670410] [<c00b7bf8>] (vfs_write+0xb0/0x178) from [<c00b7ed8>] (sys_write+0x3c/0x68) [ 37.678833] [<c00b7ed8>] (sys_write+0x3c/0x68) from [<c000e380>] (ret_fast_syscall+0x0/0x3c) [ 37.687683] Code: 1593301c e5932000 e3120080 1a000000 (e7f001f2) [ 37.700775] ---[ end trace aaf805debdb69390 ]--- Client data was assigned to iio_dev structure in probe but in hmc5843_init_client function casted to private driver data structure which is wrong. Possibly calling mutex_init(&data->lock); corrupt data which the lead to above crash. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Cc: stable <stable@vger.kernel.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10staging: iio: ak8975: Remove i2c client data corruptionPreetham Chandru1-3/+5
i2c client data set is of type struct indio_dev pointer and hence the pointer returned from i2c_get_clientdata() should be assigned to an object of type struct indio_dev and not to an object of type struct ak8975_data. Also in ak8975_probe() client data should be set first before calling ak8975_setup() as it references the client data. Signed-off-by: Preetham Chandru R <pchandru@nvidia.com> CC: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-02drivers:staging:iio Fix typos and comments in staging iio.Justin P. Mattock1-3/+3
The below patch fixes some comments and some typos that I have found while reading drivers/staging/iio/* Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24staging:iio: Use dev_pm_opsLars-Peter Clausen1-7/+13
Use dev_pm_ops instead of legacy suspend/resume callbacks for IIO drivers. Note that this patch introduces a few new #ifdef CONFIG_PM_SLEEP around the suspend and resume callbacks to avoid warnings of unused functions if CONFIG_PM_SLEEP is not defined. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09staging:iio: ak8975: add of_match table for device-tree probingOlof Johansson1-0/+8
Just like isl29018; trivial addition. Using both asahi-kasei,ak8975 and the non-prefixed version (I couldn't figure out if Asahi Kasei had a stock symbol to use, I only found numerical indexes for their stock info). Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-09Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds2-4/+5
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (466 commits) net/hyperv: Add support for jumbo frame up to 64KB net/hyperv: Add NETVSP protocol version negotiation net/hyperv: Remove unnecessary kmap_atomic in netvsc driver staging/rtl8192e: Register against lib80211 staging/rtl8192e: Convert to lib80211_crypt_info staging/rtl8192e: Convert to lib80211_crypt_data and lib80211_crypt_ops staging/rtl8192e: Add lib80211.h to rtllib.h staging/mei: add watchdog device registration wrappers drm/omap: GEM, deal with cache staging: vt6656: int.c, int.h: Change return of function to void staging: usbip: removed unused definitions from header staging: usbip: removed dead code from receive function staging:iio: Drop {mark,unmark}_in_use callbacks staging:iio: Drop buffer mark_param_change callback staging:iio: Drop the unused buffer enable() and is_enabled() callbacks staging:iio: Drop buffer busy flag staging:iio: Make sure a device is only opened once at a time staging:iio: Disallow modifying buffer size when buffer is enabled staging:iio: Disallow changing scan elements in all buffered modes staging:iio: Use iio_buffer_enabled instead of open coding it ... Fix up conflict in drivers/staging/iio/adc/ad799x_core.c (removal of module_init due to using module_i2c_driver() helper, next to removal of MODULE_ALIAS due to using MODULE_DEVICE_TABLE instead).
2011-11-26staging:iio: Add missing MODULE_DEVICE_TABLE and MODULE_ALIASLars-Peter Clausen1-0/+1
Quite a few iio drivers provide no MODULE_DEVICE_TABLE or MODULE_ALIAS or only provide a MODULE_ALIAS while they have support for multiple device ids. This prevents auto module loading from working correctly. This patch fixes it by adding the missing MODULE_DEVICE_TABLEs and MODULE_ALIAS'. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26staging:iio:treewide only use shared to decide on interfacesJonathan Cameron2-4/+4
Internally the fact that say scale is shared across channels is actually of remarkably little interest. Hence lets not store it. Numerous devices have weird combinations of channels sharing scale anyway so it is not as though this was really telling us much. Note however that we do still use the shared sysfs attrs thus massively reducing the number of attrs in complex drivers. Side effect is that certain drivers that were abusing this (mostly my work) needed to do a few more checks on what the channel they are being queried on actually is. This is also helpful for in kernel interfaces where we just want to query the scale and don't care whether it is shared with other channels or not. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26staging:iio: Do not use bitmasks for channel info addressesLars-Peter Clausen2-2/+2
Currently the iio framework uses bitmasks for the address field of channel info attributes. This is for historical reasons and no longer required since it will only ever query a single info attribute at once. This patch changes the code to use the non-shifted iio_chan_info_enum values for the info attribute address. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17staging:iio: Use module_i2c_driver to register I2C driversLars-Peter Clausen2-26/+2
Use the newly introduced module_i2c_driver macro for registering I2C drivers. This allows us to remove a few lines of boilerplate code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-17staging:iio: fix removal path to allow correct freeing.Jonathan Cameron2-4/+7
Fix a dumb lack of consideration of the effect of combining the iio_device_unregister and iio_free_device calls into one. There is no valid place to free some of the sysfs array elements. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-17staging:iio: gpio build dependency fixingJonathan Cameron1-0/+1
Numerous drivers either had pointless includes of gpio.h or should have been dependent on GENERIC_GPIO and were not. Conversion of ads1210 to use array registration triggered build failures that highlighted all was not well. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:magnetometer:ak8975: Fix probe() error-handlingStephen Warren1-1/+1
Fix ak8975_probe() to jump to the appropriate exit labels when an error occurs. With the previous code, some cleanup actions were being skipped for some error conditions. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:magnetometer:ak8975: Don't assume 0 is an invalid GPIOStephen Warren1-6/+5
gpio_is_valid() is the defined mechanism to determine whether a GPIO is valid. Use this instead of assuming that 0 is an invalid GPIO. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging:iio:magnetometer:ak8975 use platform_data to pass the gpio number.Jonathan Cameron1-1/+4
Tegra doesn't have irq_to_gpio() any more, and ak8975 is included in tegra_defconfig. This causes a build failure. Instead, pass the GPIO name through platform data. [swarren: Rewrote commit description when I squashed this with my patch to remove the irq_to_gpio() call] Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26staging: iio: Move sensor drivers to sub menusManuel Stahl1-1/+2
We have a lot of drivers now, so the iio sub menu becomes quite large. This patch creates sub menus for the different sensors. Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-16staging:iio:tree wide. abi fixup for in_ out_ prefix introduction.Jonathan Cameron1-2/+2
This patch set should bring all the attributes created outside of chan_spec registration inline with the new abi. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio:fix using iio_priv or iio_dev after iio_unregister_deviceJonathan Cameron1-1/+0
This includes calling iio_free_device as that should only be called before the device has been registered. Also one case of iio_free_device being called on a registered device. This has been pulled out of the reworking attributes patch. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-06staging:iio: push "sysfs.h" and linux/irq.h out of iio.hJonathan Cameron1-1/+1
These are no longer needed. Requires a few driver updates for places "sysfs.h" should have been present but wasn't. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23staging:iio:magnetometer: remove unused header magnet.hJonathan Cameron1-31/+0
Now all magnetomers are using iio_chan_spec there is no need for the macros in magnet.h Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.