aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/ozwpan (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-09-28staging: ozwpan: Remove typedefsChristoph Jaeger1-16/+7
As these typedefs are only used once, there is no real need for them. Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08staging: ozwpan: use kmalloc_array over kmalloc with multiplyAdrian Nicoara1-2/+2
Cleanup checkpatch.pl warnings. Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08staging: ozwpan: fix redundant return in void functionAdrian Nicoara1-1/+0
Cleanup checkpatch.pl warnings. Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08staging: ozwpan: fix redundant else after break or returnAdrian Nicoara2-11/+7
Cleanup checkpatch.pl warnings. Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08staging: ozwpan: fix missing blank line after declarationAdrian Nicoara6-0/+22
Cleanup checkpatch.pl warnings. Signed-off-by: Adrian Nicoara <anicoara@uwaterloo.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Use list helpersChristoph Jaeger4-189/+88
Make use of the various list helper functions to improve readability. Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Use slab cache for oz_tx_frame allocationChristoph Jaeger4-37/+16
Use a slab cache rather than rolling our own free list. Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Use slab cache for oz_elt_info allocationChristoph Jaeger6-72/+16
Use a slab cache rather than rolling our own free list. Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Use slab cache for oz_urb_link allocationChristoph Jaeger1-58/+12
Use a slab cache rather than rolling our own free list. Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Simplify app interfaceChristoph Jaeger8-150/+82
Simplify the somewhat overcomplicated application interface; improves readability and saves a bunch of lines. Use designated struct initializers for clarity. Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Remove dead codeChristoph Jaeger3-7/+3
No need to return a value from elt_buf_init(). Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Remove redundant initializationChristoph Jaeger1-1/+0
Member 'ops' has already been initialized by calling cdev_init(). Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Remove unused OZ_MAX_TIMER_POOL_SIZEChristoph Jaeger1-2/+0
OZ_MAX_TIMER_POOL_SIZE is not used anywhere; remove it. Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Fix typo in typedefChristoph Jaeger1-2/+2
Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-16staging: ozwpan: Add module parameter descriptionChristoph Jaeger1-1/+3
Signed-off-by: Christoph Jaeger <email@christophjaeger.info> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-23staging: ozwpan: Remove useless return variablesPeter Senna Tschudin1-4/+2
This patch remove variables that are initialized with a constant, are never updated, and are only used as parameter of return. Return the constant instead of using a variable. Verified by compilation only. The coccinelle script that find and fixes this issue is: // <smpl> @@ type T; constant C; identifier ret; @@ - T ret = C; ... when != ret - return ret; + return C; // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-23staging: ozwpan: Add missing blanklines after declarationsJames A Shackleford1-0/+15
Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-23staging: ozwpan: Change MaintainerRupesh Gujare1-1/+1
I will be not able to work on ozwpan driver anymore. Remove my name & add Tateno as maintainer. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Acked-by: Shigekatsu Tateno <shigekatsu.tateno@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-23staging: ozwpan: ozproto.c fix for "WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)"Anil Belur1-1/+1
Fixed the warning message by replacing memcpy() with ether_addr_copy() Signed-off-by: Anil Belur <askb23@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-23staging: ozwpan: remove redundant NULL check for devsDaeseok Youn1-1/+1
The "devs" is a pointer to g_net_dev in ozmain.c. g_net_dev has a default value as empty string. So "devs" cannot be NULL, removes NULL check for "devs". Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-18staging:ozwpan:Fix sparse warning of cast to restricted __le16Himangi Saraogi1-2/+2
This patch fixes the following sparse warnings: drivers/staging/ozwpan/ozusbsvc1.c:391:36: warning: cast to restricted __le16 drivers/staging/ozwpan/ozusbsvc1.c:393:33: warning: cast to restricted __le16 Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-18staging:ozwpan:Fix sparse warning of incorrect argument typeHimangi Saraogi3-3/+3
This patch fixes the following sparse warning: drivers/staging/ozwpan/ozusbsvc1.c:208:50: warning: incorrect type in argument 6 (different base types) drivers/staging/ozwpan/ozusbsvc1.c:208:50: expected unsigned short [unsigned] [usertype] windex drivers/staging/ozwpan/ozusbsvc1.c:208:50: got restricted __le16 [usertype] wIndex Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-17staging/ozwpan: coding style ether_addr_copyJérôme Pinot2-3/+4
This fixes the following issues detected by checkpatch.pl: WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) #220: FILE: drivers/staging/ozwpan/ozcdev.c:220: + memcpy(g_cdev.active_addr, addr, ETH_ALEN); WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) #286: FILE: drivers/staging/ozwpan/ozcdev.c:286: + memcpy(addr, g_cdev.active_addr, ETH_ALEN); WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2) #176: FILE: drivers/staging/ozwpan/ozpd.c:176: + memcpy(pd->mac_addr, mac_addr, ETH_ALEN); Signed-off-by: Jerome Pinot <ngc891@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-13staging/ozwpan: formatting coding styleJérôme Pinot2-2/+3
This fixes the following spacing issues detected by checkpatch.pl: WARNING: line over 80 characters #357: FILE: drivers/staging/ozwpan/ozhcd.c:357: +static struct oz_urb_link *oz_uncancel_urb(struct oz_hcd *ozhcd, struct urb *urb) ERROR: trailing whitespace #25: FILE: drivers/staging/ozwpan/ozpd.h:25: +/* $ Signed-off-by: Jerome Pinot <ngc891@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-13staging/ozwpan: coding style __constant_Jérôme Pinot2-4/+3
This fixes the following issues detected by checkpatch.pl: WARNING: __constant_cpu_to_le16 should be cpu_to_le16 #1991: FILE: drivers/staging/ozwpan/ozhcd.c:1991: + __constant_cpu_to_le16(0x0001); WARNING: __constant_cpu_to_le32 should be cpu_to_le32 #2185: FILE: drivers/staging/ozwpan/ozhcd.c:2185: + put_unaligned(__constant_cpu_to_le32(0), (__le32 *)buf); WARNING: __constant_htons should be htons #675: FILE: drivers/staging/ozwpan/ozproto.c:675: + binding->ptype.type = __constant_htons(OZ_ETHERTYPE); Signed-off-by: Jerome Pinot <ngc891@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-04drivers:staging:ozwpan Replaced wrapper functions with actual spin lock functionSurendra Patil4-26/+24
* Replaced all the spin lock/unlock wrappers from oz_polling_lock_bh() and oz_polllin_unlock_bh() with spin_lock_bh(&g_polling_lock) and spin_unlock_bh(&g_polling_lock).Completely erased the wrappers defination and declaration. * declared g_polling_lock as global variable in header file and added comments to it. Module builded successfully with sparse without warnings. Signed-off-by: Surendra Patil <surendra.tux@gmail.com> Acked-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07Staging: ozwpan: Change kmalloc() to kzalloc()Salym Senyonga1-5/+1
changing to kzalloc lets us get rid of some lines. The other concern here is that some members of binding->ptype are still uninitialized at the end of the function. Signed-off-by: Salym Senyonga <salymsash@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07Staging: ozwpan: reduce indent levels in oz_binding_add().Salym Senyonga1-23/+21
When hit error then we can return immediately. This makes the code simpler and lets us remove some indenting. Signed-off-by: Salym Senyonga <salymsash@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07Staging: ozwpan: Fix null dereferenceSalym Senyonga1-1/+2
If net_dev is NULL memcpy() will Oops. Signed-off-by: Salym Senyonga <salymsash@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-3/+4
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-20Merge tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds1-0/+2
Pull USB updates from Greg KH: "Here's the big USB pull request for 3.14-rc1 Lots of little things all over the place, and the usual USB gadget updates, and XHCI fixes (some for an issue reported by a lot of people). USB PHY updates as well as chipidea updates and fixes. All of these have been in the linux-next tree with no reported issues" * tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits) usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX usb: chipidea: need to mask INT_STATUS when write otgsc usb: chipidea: put hw_phymode_configure before ci_usb_phy_init usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28 usb: chipidea: add freescale imx28 special write register method usb: ehci: add freescale imx28 special write register method usb: core: check for valid id_table when using the RefId feature usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set usb: core: bail out if user gives an unknown RefId when using new_id usb: core: allow a reference device for new_id usb: core: add sanity checks when using bInterfaceClass with new_id USB: image: correct spelling mistake in comment USB: c67x00: correct spelling mistakes in comments usb: delete non-required instances of include <linux/init.h> usb:hub set hub->change_bits when over-current happens Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28" xhci: Set scatter-gather limit to avoid failed block writes. xhci: Avoid infinite loop when sg urb requires too many trbs usb: gadget: remove unused variable in gr_queue_int() ...
2013-12-26ozwpan: slight optimization of addr comparedingtianhong2-3/+4
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Rupesh Gujare <rupesh.gujare@atmel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17staging: delete non-required instances of include <linux/init.h>Paul Gortmaker5-5/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08usb: hcd: move controller wakeup setting initialization to individual driverPeter Chen1-0/+2
Individual controller driver has different requirement for wakeup setting, so move it from core to itself. In order to align with current etting the default wakeup setting is enabled (except for chipidea host). Pass compile test with below commands: make O=outout/all allmodconfig make -j$CPU_NUM O=outout/all drivers/usb Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-22Merge branch 'opw-next' into staging-nextGreg Kroah-Hartman2-2/+2
This pulls in all of the staging patches applied during the opw application process, and some other staging patches that were submitted during that period of time. All of these are for 3.14-rc1. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-11staging: ozwpan: remove unneeded __GFP_ZERO to kzalloc() at oz_elt_stream_create()Jie Liu1-1/+1
Get rid of the needless __GFP_ZERO flag for kzalloc() at oz_elt_stream_create(). Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-11Staging: ozwpan: fixed whitespace before semicolonMatina Maria Trompouki1-1/+1
This patch removes the following warning reported by checkpatch.pl WARNING: space prohibited before semicolon drivers/staging/ozwpan/ozproto.c Signed-off-by: Matina Maria Trompouki <mtrompou@gmail.com> Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30staging: ozwpan: prevent overflow in oz_cdev_write()Dan Carpenter1-0/+3
We need to check "count" so we don't overflow the ei->data buffer. Reported-by: Nico Golde <nico@ngolde.de> Reported-by: Fabian Yamaguchi <fabs@goesec.de> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-28staging: ozwpan: Return error, if PD is not connected.Rupesh Gujare1-0/+2
Return error if we receive write(), while PD is not connected. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-28staging: ozwpan: Change error number.Rupesh Gujare1-1/+1
Incorrect error number was returned here (EPERM), ENXIO is more appropriate. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-28staging: ozwpan: Increase ISOC IN buffer depthRupesh Gujare1-1/+1
Buffer depth of 50 units is not sufficient when there is considerable delay occuring on air due to interference, increase ISOC IN buffer depth to 100 units. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27staging: ozwpan: oz_pd_free() can be staticFengguang Wu1-1/+1
Cc: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27staging: ozwpan: Reset PORT_ENABLE bit.Rupesh Gujare1-1/+1
Reset PORT_ENABLE bit of port status on loosing PD. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27staging: ozwpan: Add debounce time before unregistering.Rupesh Gujare1-0/+5
Fixes following error caused during unloading driver. [ 1127.542888] usb 5-1: USB disconnect, device number 2 [ 1127.542909] ozwpan ozwpan: remove, state 1 [ 1127.542933] usb usb5: USB disconnect, device number 1 [ 1127.618634] hub 5-0:1.0: hub_port_status failed (err = -19) [ 1127.618647] hub_port_connect_change: 45 callbacks suppressed [ 1127.618657] hub 5-0:1.0: connect-debounce failed, port 1 disabled [ 1127.618668] hub 5-0:1.0: cannot disable port 1 (err = -19) Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26staging: ozwpan: change max. TX frame size supported.Rupesh Gujare1-1/+1
Max. TX frame size supported is changed to 760 bytes. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26staging: ozwpan: Fix error checking while transmitting frame.Rupesh Gujare1-4/+4
Make sure that we return negative value if oz_build_frame() returns NULL. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26staging: ozwpan: change variable type.Rupesh Gujare1-2/+2
We have icreased interrupt end point buffer size to 512 bytes, Change variable data type to accomodate it. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26staging: ozwpan: Increase interrupt end point buffer sizeRupesh Gujare1-1/+2
Increase interrupt end point buffer size & convert hard coded value to macro for better readability. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26staging: ozwpan: Convert hard coded value to MacroRupesh Gujare1-1/+2
Use macro instead of hard coded value for readability. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26staging: ozwpan: Check for correct config number.Rupesh Gujare1-1/+1
Check for valid config number before completing set interface. Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.