aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-10Linux 5.0-rc6Linus Torvalds1-1/+1
2019-02-10x86/mm: Make set_pmd_at() paravirt awareJuergen Gross1-1/+1
set_pmd_at() calls native_set_pmd() unconditionally on x86. This was fine as long as only huge page entries were written via set_pmd_at(), as Xen pv guests don't support those. Commit 2c91bd4a4e2e53 ("mm: speed up mremap by 20x on large regions") introduced a usage of set_pmd_at() possible on pv guests, leading to failures like: BUG: unable to handle kernel paging request at ffff888023e26778 #PF error: [PROT] [WRITE] RIP: e030:move_page_tables+0x7c1/0xae0 move_vma.isra.3+0xd1/0x2d0 __se_sys_mremap+0x3c6/0x5b0 do_syscall_64+0x49/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Make set_pmd_at() paravirt aware by just letting it use set_pmd(). Fixes: 2c91bd4a4e2e53 ("mm: speed up mremap by 20x on large regions") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Cc: sstabellini@kernel.org Cc: hpa@zytor.com Cc: bp@alien8.de Cc: torvalds@linux-foundation.org Link: https://lkml.kernel.org/r/20190210074056.11842-1-jgross@suse.com
2019-02-08MAINTAINERS: Update the ocores i2c bus driver maintainer, etcAndrew Lunn1-0/+2
The listed maintainer has not been responding to emails for a while. Add myself as a second maintainer. Add the platform data include file, which was not listed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-02-08blk-mq: remove duplicated definition of blk_mq_freeze_queueLiu Bo1-1/+0
As the prototype has been defined in "include/linux/blk-mq.h", the one in "block/blk-mq.h" can be removed then. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08Blk-iolatency: warn on negative inflight IO counterLiu Bo1-1/+3
This is to catch any unexpected negative value of inflight IO counter. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08blk-iolatency: fix IO hang due to negative inflight counterLiu Bo1-7/+45
Our test reported the following stack, and vmcore showed that ->inflight counter is -1. [ffffc9003fcc38d0] __schedule at ffffffff8173d95d [ffffc9003fcc3958] schedule at ffffffff8173de26 [ffffc9003fcc3970] io_schedule at ffffffff810bb6b6 [ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb [ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3 [ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a [ffffc9003fcc3b08] generic_make_request at ffffffff81368b49 [ffffc9003fcc3b68] submit_bio at ffffffff81368d7d [ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4] [ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4] [ffffc9003fcc3d68] do_writepages at ffffffff811c49ae [ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188 [ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301 [ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4] [ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b [ffffc9003fcc3ee8] do_fsync at ffffffff81285abd [ffffc9003fcc3f18] sys_fsync at ffffffff81285d50 [ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04 [ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e The ->inflight counter may be negative (-1) if 1) blk-iolatency was disabled when the IO was issued, 2) blk-iolatency was enabled before this IO reached its endio, 3) the ->inflight counter is decreased from 0 to -1 in endio() In fact the hang can be easily reproduced by the below script, H=/sys/fs/cgroup/unified/ P=/sys/fs/cgroup/unified/test echo "+io" > $H/cgroup.subtree_control mkdir -p $P echo $$ > $P/cgroup.procs xfs_io -f -d -c "pwrite 0 4k" /dev/sdg echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency xfs_io -f -d -c "pwrite 0 4k" /dev/sdg This fixes the problem by freezing the queue so that while enabling/disabling iolatency, there is no inflight rq running. Note that quiesce_queue is not needed as this only updating iolatency configuration about which dispatching request_queue doesn't care. Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08MAINTAINERS: unify reference to xen-devel listLukas Bulwahn1-1/+1
In the linux kernel MAINTAINERS file, largely "xen-devel@lists.xenproject.org (moderated for non-subscribers)" is used to refer to the xen-devel mailing list. The DRM DRIVERS FOR XEN section entry mentions xen-devel@lists.xen.org instead, but that is just the same mailing list as the mailing list above. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-02-08x86/mm/cpa: Fix set_mce_nospec()Peter Zijlstra1-25/+25
The recent commit fe0937b24ff5 ("x86/mm/cpa: Fold cpa_flush_range() and cpa_flush_array() into a single cpa_flush() function") accidentally made the call to make_addr_canonical_again() go away, which breaks set_mce_nospec(). Re-instate the call to convert the address back into canonical form right before invoking either CLFLUSH or INVLPG. Rename the function while at it to be shorter (and less MAGA). Fixes: fe0937b24ff5 ("x86/mm/cpa: Fold cpa_flush_range() and cpa_flush_array() into a single cpa_flush() function") Reported-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Rik van Riel <riel@surriel.com> Link: https://lkml.kernel.org/r/20190208120859.GH32511@hirez.programming.kicks-ass.net
2019-02-08futex: Handle early deadlock return correctlyThomas Gleixner2-15/+50
commit 56222b212e8e ("futex: Drop hb->lock before enqueueing on the rtmutex") changed the locking rules in the futex code so that the hash bucket lock is not longer held while the waiter is enqueued into the rtmutex wait list. This made the lock and the unlock path symmetric, but unfortunately the possible early exit from __rt_mutex_proxy_start() due to a detected deadlock was not updated accordingly. That allows a concurrent unlocker to observe inconsitent state which triggers the warning in the unlock path. futex_lock_pi() futex_unlock_pi() lock(hb->lock) queue(hb_waiter) lock(hb->lock) lock(rtmutex->wait_lock) unlock(hb->lock) // acquired hb->lock hb_waiter = futex_top_waiter() lock(rtmutex->wait_lock) __rt_mutex_proxy_start() ---> fail remove(rtmutex_waiter); ---> returns -EDEADLOCK unlock(rtmutex->wait_lock) // acquired wait_lock wake_futex_pi() rt_mutex_next_owner() --> returns NULL --> WARN lock(hb->lock) unqueue(hb_waiter) The problem is caused by the remove(rtmutex_waiter) in the failure case of __rt_mutex_proxy_start() as this lets the unlocker observe a waiter in the hash bucket but no waiter on the rtmutex, i.e. inconsistent state. The original commit handles this correctly for the other early return cases (timeout, signal) by delaying the removal of the rtmutex waiter until the returning task reacquired the hash bucket lock. Treat the failure case of __rt_mutex_proxy_start() in the same way and let the existing cleanup code handle the eventual handover of the rtmutex gracefully. The regular rt_mutex_proxy_start() gains the rtmutex waiter removal for the failure case, so that the other callsites are still operating correctly. Add proper comments to the code so all these details are fully documented. Thanks to Peter for helping with the analysis and writing the really valuable code comments. Fixes: 56222b212e8e ("futex: Drop hb->lock before enqueueing on the rtmutex") Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Stefan Liebler <stli@linux.ibm.com> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1901292311410.1950@nanos.tec.linutronix.de
2019-02-08futex: Fix barrier commentDavidlohr Bueso1-2/+2
The current comment for the barrier that guarantees that waiter increment is always before taking the hb spinlock (barrier (A)) needs to be fixed as it is misplaced. This is obviously referring to hb_waiters_inc, which is a full barrier. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190206185602.949-1-dave@stgolabs.net
2019-02-08staging: wlan-ng: formatting change in cfg80211.cK Hodges1-1/+2
Resolve "Line over 80 characters" warning from checkpatch Signed-off-by: K Hodges <khodges42@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-08staging: android: formatting change in ashmem.cK Hodges1-1/+2
Resolved "Line over 80 characters" warning from checkpatch Signed-off-by: K Hodges <khodges42@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07net: dsa: b53: Fix for failure when irq is not defined in dtArun Parameswaran1-3/+0
Fixes the issues with non BCM58XX chips in the b53 driver failing, when the irq is not specified in the device tree. Removed the check for BCM58XX in b53_srab_prepare_irq(), so the 'port->irq' will be set to '-EXIO' if the irq is not specified in the device tree. Fixes: 16994374a6fc ("net: dsa: b53: Make SRAB driver manage port interrupts") Fixes: b2ddc48a81b5 ("net: dsa: b53: Do not fail when IRQ are not initialized") Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07blktrace: Show requests without sectorJan Kara1-1/+7
Currently, blktrace will not show requests that don't have any data as rq->__sector is initialized to -1 which is out of device range and thus discarded by act_log_check(). This is most notably the case for cache flush requests sent to the device. Fix the problem by making blk_rq_trace_sector() return 0 for requests without initialized sector. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-07mips: cm: reprime error causeVladimir Kondratiev1-1/+1
Accordingly to the documentation ---cut--- The GCR_ERROR_CAUSE.ERR_TYPE field and the GCR_ERROR_MULT.ERR_TYPE fields can be cleared by either a reset or by writing the current value of GCR_ERROR_CAUSE.ERR_TYPE to the GCR_ERROR_CAUSE.ERR_TYPE register. ---cut--- Do exactly this. Original value of cm_error may be safely written back; it clears error cause and keeps other bits untouched. Fixes: 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors") Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v4.3+
2019-02-07mips: loongson64: remove unreachable(), fix loongson_poweroff().Yifeng Li1-1/+6
On my Yeeloong 8089, I noticed the machine fails to shutdown properly, and often, the function mach_prepare_reboot() is unexpectedly executed, thus the machine reboots instead. A wait loop is needed to ensure the system is in a well-defined state before going down. In commit 997e93d4df16 ("MIPS: Hang more efficiently on halt/powerdown/restart"), a general superset of the wait loop for all platforms is already provided, so we don't need to implement our own. This commit simply removes the unreachable() compiler marco after mach_prepare_reboot(), thus allowing the execution of machine_hang(). My test shows that the machine is now able to shutdown successfully. Please note that there are two different bugs preventing the machine from shutting down, another work-in-progress commit is needed to fix a lockup in cpufreq / i8259 driver, please read Reference, this commit does not fix that bug. Reference: https://lkml.org/lkml/2019/2/5/908 Signed-off-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org # v4.17+
2019-02-07sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()Hangbin Liu1-1/+2
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07geneve: should not call rt6_lookup() when ipv6 was disabledHangbin Liu1-3/+7
When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference. v2: - don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet) - there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric). Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: c40e89fd358e9 ("geneve: configure MTU based on a lower device") Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)Peter Shier1-0/+1
Bugzilla: 1671904 There are multiple code paths where an hrtimer may have been started to emulate an L1 VMX preemption timer that can result in a call to free_nested without an intervening L2 exit where the hrtimer is normally cancelled. Unconditionally cancel in free_nested to cover all cases. Embargoed until Feb 7th 2019. Signed-off-by: Peter Shier <pshier@google.com> Reported-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Reported-by: Felix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Message-Id: <20181011184646.154065-1-pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-07KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)Paolo Bonzini1-0/+7
Bugzilla: 1671930 Emulation of certain instructions (VMXON, VMCLEAR, VMPTRLD, VMWRITE with memory operand, INVEPT, INVVPID) can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code. The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero. Embargoed until Feb 7th 2019. Reported-by: Felix Wilhelm <fwilhelm@google.com> Cc: stable@kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-07kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)Jann Horn1-1/+2
kvm_ioctl_create_device() does the following: 1. creates a device that holds a reference to the VM object (with a borrowed reference, the VM's refcount has not been bumped yet) 2. initializes the device 3. transfers the reference to the device to the caller's file descriptor table 4. calls kvm_get_kvm() to turn the borrowed reference to the VM into a real reference The ownership transfer in step 3 must not happen before the reference to the VM becomes a proper, non-borrowed reference, which only happens in step 4. After step 3, an attacker can close the file descriptor and drop the borrowed reference, which can cause the refcount of the kvm object to drop to zero. This means that we need to grab a reference for the device before anon_inode_getfd(), otherwise the VM can disappear from under us. Fixes: 852b6d57dc7f ("kvm: add device control API") Cc: stable@kernel.org Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-07signal: Better detection of synchronous signalsEric W. Biederman1-1/+51
Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. When the stack overflows delivery of SIGHUP fails and force_sigsegv is called. Unfortunately because SIGSEGV is numerically higher than SIGHUP next_signal tries again to deliver a SIGHUP. From a quality of implementation standpoint attempting to deliver the timer SIGHUP signal is wrong. We should attempt to deliver the synchronous SIGSEGV signal we just forced. We can make that happening in a fairly straight forward manner by instead of just looking at the signal number we also look at the si_code. In particular for exceptions (aka synchronous signals) the si_code is always greater than 0. That still has the potential to pick up a number of asynchronous signals as in a few cases the same si_codes that are used for synchronous signals are also used for asynchronous signals, and SI_KERNEL is also included in the list of possible si_codes. Still the heuristic is much better and timer signals are definitely excluded. Which is enough to prevent all known ways for someone sending a process signals fast enough to cause unexpected and arguably incorrect behavior. Cc: stable@vger.kernel.org Fixes: a27341cd5fcb ("Prioritize synchronous signals over 'normal' signals") Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07signal: Always notice exiting tasksEric W. Biederman1-0/+6
Recently syzkaller was able to create unkillablle processes by creating a timer that is delivered as a thread local signal on SIGHUP, and receiving SIGHUP SA_NODEFERER. Ultimately causing a loop failing to deliver SIGHUP but always trying. Upon examination it turns out part of the problem is actually most of the solution. Since 2.5 signal delivery has found all fatal signals, marked the signal group for death, and queued SIGKILL in every threads thread queue relying on signal->group_exit_code to preserve the information of which was the actual fatal signal. The conversion of all fatal signals to SIGKILL results in the synchronous signal heuristic in next_signal kicking in and preferring SIGHUP to SIGKILL. Which is especially problematic as all fatal signals have already been transformed into SIGKILL. Instead of dequeueing signals and depending upon SIGKILL to be the first signal dequeued, first test if the signal group has already been marked for death. This guarantees that nothing in the signal queue can prevent a process that needs to exit from exiting. Cc: stable@vger.kernel.org Tested-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Ref: ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-02-07staging: rtl8192e: rename members of struct rtllib_device - styleHimadri Pandya4-39/+39
Rename following members of struct rtllib_device to fix checkpatch warning: Avoid CamelCase pDot11dInfo -> dot11d_info bGlobalDomain -> global_domain IbssStartChnl -> bss_start_channel Signed-off-by: Himadri Pandya <himadri18.07@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: rtl8192e: rename members of struct rt_dot11d_info - styleHimadri Pandya2-29/+29
Rename following members of struct rt_dot11d_info to fix checkpatch warning: Avoid Camelcase bEnabled -> enabled CountryIeLen -> country_len CountryIeBuf -> country_buffer CountryIeSrcAddr -> country_src_addr CountryIeWatchdog -> country_watchdog MaxTxPwrDbmList -> max_tx_power_list State -> state Signed-off-by: Himadri Pandya <himadri18.07@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: rtl8192e: rename members of struct chnl_txpow_triple - styleHimadri Pandya2-11/+11
Rename following members of chnl_txpow_triple to fix checkpatch warning: Avoid CamelCase FirstChnl -> first_channel NumChnls -> num_channels MaxTxPowerInDbm -> max_tx_power Signed-off-by: Himadri Pandya <himadri18.07@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: rename linux_wlan.c and linux_mon.cAjay Singh3-1/+1
Rename linux_wlan.c and linux_mon.c to wilc_netdev.c and wilc_mon.c to include 'wilc_' prefix. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: remove 'linux_' prefix in function namesAjay Singh2-14/+13
Remove 'linux_' prefix and replace it with 'wilc_' namespace. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: rename wilc_frmw_to_linux()Ajay Singh3-5/+5
Rename wilc_frmw_to_linux() to wilc_frmw_to_host() to be remove the _linux suffix. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: added 'wilc_' prefix for function in wilc_sdio.c fileAjay Singh1-46/+46
Cleanup patch to have proper follow clear namespace in wilc_sdio.c file. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: avoid function forward declaration in wilc_sdio.c fileAjay Singh1-48/+43
Cleanup patch to avoid function forward declaration by reordering the function. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: move macro and function prototype from wilc_wlan_if.h fileAjay Singh5-36/+23
Move data structure and function prototype from 'wilc_wlan_if.h file. Now, this file contains constant specific to the firmware. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: add 'wilc_' prefix to have proper namespaceAjay Singh8-61/+61
Cleanup patch to rename data structure and function name to have 'wilc_' prefix. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: fix to set correct value for 'vif_num'Ajay Singh1-2/+2
Set correct value in '->vif_num' for the total number of interfaces and set '->idx' value using 'i'. Fixes: 735bb39ca3be ("staging: wilc1000: simplify vif[i]->ndev accesses") Fixes: 0e490657c721 ("staging: wilc1000: Fix problem with wrong vif index") Cc: <stable@vger.kernel.org> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: vt6656: Use the correct style for SPDX license IdentifierNishad Kamdar1-1/+1
This patch corrects the style for SPDX license Identifier in mac.h by using "/* */" in place of "//" as per Linux kernel licensing rules. Issue found by checkpatch. Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: rtl8192u: remove redundant nul check on pointer devColin Ian King1-13/+11
There is a null check on pointer dev which implies it may be null, however dev can never be null as it is set in rtl8192_usb_probe via the call to usb_set_intfdata. Detected by CoverityScan, CID#143078 ("Dereference after null check") Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: sm750fb: Rename setDisplayControl to set_display_control - styleJin Chen1-3/+3
Fix checkpatch.pl warning: CHECK: Avoid CamelCase: <setDisplayControl> Signed-off-by: Jin Chen <nobijinc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07Staging: rtl8723bs: remove some dead codeDan Carpenter1-8/+0
"psecnetwork" is the address of &psecuritypriv->sec_bss. Since ->sec_bss isn't the first member of the struct that means that "psecnetwork" can't be NULL. We can just remove this dead code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: define p2p related static variable as constantsAjay Singh1-2/+2
Add constant qualifer for 'p2p_vendor_spec' & 'p2p_oui' static variable because they are treated like constant values. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: move 'curr_channel' static variable in 'wilc' structAjay Singh2-10/+13
Avoid the use of static variable and move it as part of wilc structure. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: move static variable 'wlan_channel' to 'wilc' structAjay Singh2-17/+20
Avoid use of static variable 'wlan_channel' by moving it inside the wilc structure. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: avoid use of static variable in linux_mon.cAjay Singh1-5/+4
Define local variable for 'srcadd' & 'bssid' static variables and use ether_addr_copy() to copy value into them. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: avoid use of 'hif_deinit_lock' static variableAjay Singh2-11/+11
Avoid use of static variable 'hif_deinit_lock' and move it as part of wilc struct. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: remove unused struct 'add_sta_param'Ajay Singh1-11/+0
Remove 'add_sta_param' structure as its not used now. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: add check before performing operation on net_deviceAjay Singh1-4/+8
Before calling an operation on net_device check if that interface is available. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: avoid use of interface names for validationAjay Singh1-74/+70
Avoid use of interface name i.e 'wlan0' & 'p2p0' to check the interface type in dev_state_ev_handler(). Now making use of netdev_ops and iface type to know interface. Reorder the functions to avoid the forward declaration after the above changes Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: use random number for cookie instead of pointerAjay Singh1-1/+1
Use random number to assign to cookie value. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: refactor code to use cookie informationAjay Singh4-85/+53
Make use of cookie information to pass to wpa_s and handle cookie value received in the cfg80211_ops callbacks. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: refactor linux_wlan_init_test_config()Ajay Singh2-118/+83
Refactor linux_wlan_init_test_config() to use correct endianness for wid values and remove unnecessary code. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07staging: wilc1000: remove use of 'terminated_handle' static variableAjay Singh1-8/+7
Remove use of 'terminated_handle' variable and set the 'hif_drv' to NULL once it's free. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.