Age | Commit message (Collapse) | Author | Files | Lines |
|
Change call sites of r8712_set_802_11_add_wep to check for 0 and
non-zero values (e.g -EINVAL, -ENOMEM) instead of for _SUCCESS and
_FAIL.
Change return values of r8712_set_802_11_add_wep from true and false and
_SUCCESS to -EINVAL and the return value of r8712_set_key.
Change return type from u8 to int to accommodate these new return
values.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190722092341.21030-6-nishkadg.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change return values of function r8712_parse_wpa2_ie from
_SUCCESS/_FAIL to 0/-EINVAL.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change return values of function r8712_parse_wpa_ie from _SUCCESS/_FAIL
to 0/-EINVAL. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An earlier patch I sent reduced the stack usage enough to get
below the warning limit, and I could show this was safe, but with
GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack
variables in the same function no longer overlap:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Split out the largest two blocks in the affected function into two
separate functions and mark those noinline_for_stack.
Fixes: 8c5af16f7953 ("staging: rtl8712: reduce stack usage")
Fixes: 81a56f6dcd20 ("gcc-plugins: structleak: Generalize to all variable types")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the return values of function r8712_setdatarate_cmd from _SUCCESS
and _FAIL to 0 and -ENOMEM respectively.
Change the return type of the function from u8 to int to reflect this.
Change the call site of the function to check for 0 instead of _SUCCESS.
Return the value at the call site directly instead of storing it in a
return variable.
Remove now-unused return variable.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The local return variable ret may be replaced directly by its value,
especially since its type (uint) is not the same as the function's
return type (int).
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building with W=1 reports (among other things)
CC [M] drivers/staging/rtl8712/rtl871x_ioctl_linux.o
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1106: warning: Cannot understand *
on line 1106 - I thought it was a doc line
CC [M] drivers/staging/rtl8712/os_intfs.o
drivers/staging/rtl8712/os_intfs.c:366: warning: Cannot understand *
on line 366 - I thought it was a doc line
drivers/staging/rtl8712/os_intfs.c:434: warning: Cannot understand *
on line 434 - I thought it was a doc line
Fix up the non-kerneldoc comments
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Rename structure field bDriverStopped to driver_stopped to avoid
camelcase. Suggested by checkpatch.
- Change type to bool as the variable is being used as boolean.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This satisfies a checkpatch warning and is the preferred
method for notating the license.
The SPDX identifier is a legally binding shorthand, which
can be used instead of the full boiler plate text.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When strncpy() is called with source and destination strings the same
length, gcc 8 warns that there may be an unterminated string. Using
strlcpy() rather than strncpy() forces a null at the end and quiets the
warning.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Array iw_operation_mode is defined but is never used hence it is
redundant and can be removed. This array has been like this since
the driver was added back in 2010
Cleans up clang warning:
warning: 'iw_operation_mode' defined but not used [-Wunused-const-variable=]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes various coding style issues in the rtl8712 module as
noted by checkpatch.pl related to dereferencing over multiple lines.
It fixes the following checkpatch.pl warning:
WARNING: Avoid multiple line dereference - prefer %s
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes a coding style issues in the rtl8712 module as noted
by checkpatch.pl regarding the returned error code.
It fixes the following checkpatch.pl warning:
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes various coding style issues in the rtl8712 module as
noted by checkpatch.pl related to indentation.
It fixes the following checkpatch.pl warning:
WARNING: suspect code indent for conditional statements
Signed-off-by: Martin Homuth <martin@martinhomuth.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check the condition: "pdata->length < 32" first, to be able to return immediately
in case of error and then continue with the rest of the function without one
extra indentation level.
This was found using the following Coccinelle script:
@disable neg_if@
expression e,E;
statement S;
@@
*if (e)
S
else { return -E; }
@disable neg_if@
expression e,E;
statement S;
identifier l;
@@
*if
(e)
S
else
{ rc = -E; goto l; }
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Invert if statements to be able to return immediately in case of error,
and to avoid additional else branch.
Improve layout of function since there is more horizontal space now.
This was found using the following Coccinelle script:
@disable neg_if@
expression e,E;
statement S;
@@
*if (e)
S
else { return -E; }
@disable neg_if@
expression e,E;
statement S;
identifier l;
@@
*if
(e)
S
else
{ rc = -E; goto l; }
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Negate if condition to be able to return immediately in case of error,
and then continue with the rest of the function
without extra indentation level.
This was found using the following Coccinelle script:
@disable neg_if@
expression e,E;
statement S;
@@
*if (e)
S
else { return -E; }
@disable neg_if@
expression e,E;
statement S;
identifier
l;
@@
*if
(e)
S
else
{ rc = -E; goto l; }
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Invert if statements to be able to return immediately in case of error,
and to avoid additional else branch, and then continue with the rest
of the function without excessive indentation.
This was found using the following Coccinelle script:
@disable neg_if@
expression e,E;
statement S;
@@
*if (e)
S
else { return -E; }
@disable neg_if@
expression e,E;
statement S;
identifier l;
@@
*if (e)
S
else { rc = -E; goto l; }
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
WARNING: Avoid multiple line dereference - prefer 'param->u.crypt.key'
Signed-off-by: Alexander Mikhalevich <alex.mikhalevich@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sparse reports the following:
CHECK drivers/staging/rtl8712/rtl871x_ioctl_linux.c
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1422:46: warning: restricted __le16 degrades to integer
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1424:46: warning: restricted __le16 degrades to integer
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Found by checkpatch:
- s/cacluated/calculated/
- s/convertor/converter/
- s/psudo/pseudo/
- s/halfs/halves/
Signed-off-by: Joseph Wright <rjosephwright@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed a sparse warning.
Using function le16_to_cpus() to avoid double assignment.
Signed-off-by: Jannik Becher <becher.jannik@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The indent code blocks of the else statements were unnecessary
and are better written without them.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
removed the following:
ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line
WARNING: Statements should start on a tabstop
Signed-off-by: Omri Arad <omriarad3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch drops the local definition of LIST_CONTAINOR(), and uses
container_of() instead of it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.
This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@
e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If 32 bytes of non zero are passed in pdata->pointer then the mac_pton
function will run off the end of the buffer. Make sure we always have a
terminated string kernel side.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "translate_scan" function in rtl8712 uses a lot of stack, and
gets inlined into its single caller, r8711_wx_get_scan, which
in some configurations now blows the 1024 byte stack warning
limit:
drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'r8711_wx_get_scan':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:1227:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
This somewhat reduces the stack usage by moving the translate_scan
function out of line with the noinline_for_stack annotation.
It might be possible to modify translate_scan() a little further
to reduce the stack usage, but with this patch, we can build without
the warning, the the call chain to get here is rather predictable
(sys_ioctl->vfs_ioctl->sock_ioctl->dev_ioctl->wext_ioctl->
r8711_wx_get_scan).
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
->KeyMaterial is declared as a 16 byte array, but we only ever allocate
either 5 or 13 bytes of it. The problem is that we memset() all 16
bytes to zero so we're memsetting past the end of the allocated memory.
I fixed this in slightly lazy way, by just allocating 16 bytes. This
works but there is a lot more cleanup you could do to this code if you
wanted. Which is why this code is in staging.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clean up all instances of checkpatch.pl checks:
CHECK: spaces preferred around that '+'
(and other operands)
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix all instances of the following checkpatch.pl check:
CHECK: braces {} should be used on all arms of this statement
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Boolean tests do not need explicit comparison to true or false.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is to the rtl871x_ioctl_linux.c file that fixes up following
warnings reported by checkpatch.pl :
-Block comments use * on subsequent lines
-Block comments use a trailing */ on a separate line
Signed-off-by: Punit Vara <punitvara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is to the rtl871x_ioctl_linux.c file that fixes up following
warning reported by checkpatch.pl :
-Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()
bssid and pnetwork->network.MacAddress both are 6 byte
array which aligned with u16
Signed-off-by: Punit Vara <punitvara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is to the rtl871x_ioctl_linux.c that fixes up following
warning by checkpatch.pl:
-Prefer eth_broadcast_addr() over memset()
Signed-off-by: Punit Vara <punitvara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
range->avg_qual.level is of type uint8, so it shouldn't be assigned a
negative number. Assigning it 0x100 - 78, which is the equivalent
to (20 + -98) dBm when IW_QUAL_DBM is set.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move constant to the right side of comparison operator or replace
equality operator (==) with the unary negation operator (!) if the
comparison is to zero.
Addesses multiple instances of the checkpatch.pl warning:
WARNING: Comparisons should place the constant on the right side of the
test
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
...instead of custom approach
Cc: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the value to a name that conforms to Linux coding style.
"rates" is equally expressive in this context, and I have left alone
a comment and function name that describe the rates as supported rates.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Coding style fix.
Get rid of typedefs NDIS_802_11_RATES and NDIS_802_11_RATES_EX
Undo any casting that was done as a result of the typedef.
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct ndis_wlan_bssid_ex is a doppelganger of struct wlan_bssid_ex,
and is used about a third as often.
Switch all instances to wlan_bssid_ex, and remove ndis_wlan_bssid_ex
This also gets rid of a use of typedef NDIS_802_11_RATES_EX
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes checkpatch.pl warning.
WARNING: else is not generally useful after a break or return
Signed-off-by: Dogukan Ergun <dogukan.ergun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If memdup_user() fails then "pparmbuf" is an error pointer and we can't
pass it to kfree(). I changed the "goto _r871x_mp_ioctl_hdl_exit" to a
direct return.
I changed the earlier goto to a direct return as well for consistency
and removed the "pparmbuf = NULL" initializer since it's no longer
needed.
Fixes: 45de432775d6 ('Staging: rtl8712: Use memdup_user() instead of copy_from_user()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The result of netdev_priv is already implicitly cast to the type of the
left side of the assignment.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T *x;
@@
x =
- (T *)
netdev_priv(...)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use memdup_user() to avoid its duplicated implementation and simplify
code. memdup_user() uses GFP_KERNEL instead of GFP_ATOMIC,
which is valid because copy_from_user() might sleep and it's useless
to make the allocation atomic. Found with coccinelle.
Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch replace memcpy with ethe_addr_copy to address the following
warning generated by checkpatch.pl: ""Prefer ether_addr_copy over memcpy
if the Ethernet addresses are __aligned(2)"
Follwoing is the output of pahole for the relevant datastructures:
1- for "iwe.u.ap_addr.sa_data" and "wrqu->ap_addr.sa_data"
struct sockaddr {
sa_family_t sa_family; /* 0 2 */
char sa_data[14]; /* 2 14 */
/* size: 16, cachelines: 1, members: 2 */
/* last cacheline: 16 bytes */
};
struct iw_event {
__u16 len; /* 0 2 */
__u16 cmd; /* 2 2 */
/* XXX 4 bytes hole, try to pack */
union iwreq_data u; /* 8 16 */
/* size: 24, cachelines: 1, members: 3 */
/* sum members: 20, holes: 1, sum holes: 4 */
/* last cacheline: 24 bytes */
};
2- for "pnetwork->network.MacAddress" and "pcur_bss->MacAddress"
struct wlan_network {
struct list_head list; /* 0 16 */
int network_type; /* 16 4 */
int fixed; /* 20 4 */
unsigned int last_scanned; /* 24 4 */
int aid; /* 28 4 */
int join_res; /* 32 4 */
struct ndis_wlan_bssid_ex network; /* 36 884 */
/* --- cacheline 14 boundary (896 bytes) was 24 bytes ago --- */
/* size: 920, cachelines: 15, members: 7 */
/* last cacheline: 24 bytes */
};
struct ndis_wlan_bssid_ex {
u32 Length; /* 0 4 */
unsigned char MacAddress[6]; /* 4 6 */
u8 Reserved[2]; /* 10 2 */
struct ndis_802_11_ssid Ssid; /* 12 36 */
u32 Privacy; /* 48 4 */
s32 Rssi; /* 52 4 */
enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; /* 56 4 */
struct NDIS_802_11_CONFIGURATION Configuration; /* 60 32 */
/* --- cacheline 1 boundary (64 bytes) was 28 bytes ago --- */
enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; /* 92 4 */
NDIS_802_11_RATES_EX SupportedRates; /* 96 16 */
u32 IELength; /* 112 4 */
u8 IEs[768]; /* 116 768 */
/* --- cacheline 13 boundary (832 bytes) was 52 bytes ago --- */
/* size: 884, cachelines: 14, members: 12 */
/* last cacheline: 52 bytes */
};
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
eth_zero_addr() is a wrapper function for memset if 0 is going to
be assigned to a mac address. The aforementioned function replaces
memset. In addition, linux/etherdevice.h was included as a header
since it is the file that defines the inline function eth_zero_addr().
The changes were carried out using the following coccinelle script:
@header@
@@
#include <linux/etherdevice.h>
@eth_zero_addr@
expression e;
@@
-memset(e,0,ETH_ALEN);
+eth_zero_addr(e);
@eth_broadcast_addr@
identifier e;
@@
-memset(e,\(0xff\|0xFF\|255\),ETH_ALEN);
+eth_broadcast_addr(e);
@linux_header depends on !header && (eth_zero_addr || eth_broadcast_addr) @
@@
+ #include <linux/etherdevice.h>
+
@special_header depends on !header && !linux_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
+
@custom_header depends on !header && !linux_header && !special_header && (eth_zero_addr || eth_broadcast_addr) @
@@
+
+ #include <linux/etherdevice.h>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces the use of API function mod_timer
instead of driver specific function as it is a more
efficient and standard way to update the expire field of
an active timer.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch.pl fix for
ERROR: space prohibited before that ',' (ctx:WxE)
Signed-off-by: Max Perepelitsyn <mperepelitsyn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
unused variables are removed. These variables were only assigned some
values and after that they were never being used. So they are safe to
be removed , and it has been build tested.
I left a call to r8712_read32(padapter, TCR) and
r8712_read8(padapter, SDIO_HCPWM) .
r8712_read32() and r8712_read8() is ultimately calling usb_read32()
and usb_read8() respectively. and they are again calling
r8712_usbctrl_vendorreq().
this r8712_usbctrl_vendorreq() is communicating through the usb bus
and is sending and receiving the control msg.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|