Age | Commit message (Collapse) | Author | Files | Lines |
|
Lower case to fix CamelCase checkpatch.pl warning
"CHECK: Avoid CamelCase: <ulActualMxClk>".
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Challenge suggested by coccinelle.
Replace bit shifting on 1 with the BIT(x) macro.
Coccinelle script:
@@
constant c;
@@
-(1 << c)
+BIT(c)
Signed-off-by: Sanjana Sanikommu <sanjana99reddy99@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove an unnecessary local variable in sm750_format_pll_reg function
and replace its initialization directly in return type.
Issue suggested by Coccinelle using ret.cocci.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Edit CamelCase in local variables across 4 files:
- sm750fb/ddk750_chip.c
- sm750fb/ddk750_chip.h
- sm750fb/ddk750_dvi.c
- sm750fb/ddk750_sii164.c
to comply with the coding style. Also edit associated comments
accordingly.
Issue found with Checkpatch.
Signed-off-by: Nishka Dasgupta <nishka.dasgupta@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch.pl warning: do not add new typedefs.
Signed-off-by: Christian Luetke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fixed a typo issue in get_mxclk_freq() function.
the original code using PLL_CTRL_M_SHIFT for shifting to set N flag.
which is not right, it should be PLL_CTRL_N_SHIFT.
both PLL_CTRL_M_SHIFT and PLL_CTRL_N_SHIFT
defined in drivers/staging/sm750fb/ddk750_reg.h
Signed-off-by: Lynn Lei <lynnl.wit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch breaks lines that are longer than 80 characters and joins
together those, that are too short and can be placed at one.
Function calls and declarations are updated to fit kernel code style.
Signed-off-by: Matej Dujava <mdujava@kocurkovo.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed parentheses on the right hand side of assignment, as they are
not required. The following coccinelle script was used to fix this
issue:
@@
local idexpression id;
expression e;
@@
id =
-(
e
-)
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Line over 80 characters are split to fix the following checkpatch issue:
WARNING: line over 80 characters
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added braces around if statement. This patch fixes the following
checkpatch issue:
CHECK: braces {} should be used on all arms of this statement
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
POKE32 and PEEK32 have been replaced by inlined functions poke32 and
peek32.
Having inline functions instead of macros help to get the correct
type-checking and avoid the possible precedence issues reported by
checkpatch.
Signed-off-by: Matthieu Simon <gmatthsim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch warning - Please don't use multiple blank lines
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes absence of braces on last arm of statement, identified by
checkpatch
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"revId" needs to be unsigned because we use it to test:
if (revId == SM750LE_REVISION_ID) {
and SM750LE_REVISION_ID is ((unsigned char )0xfe).
Fixes: 81dee67e215b ("staging: sm750fb: add sm750 to staging")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Renaming some symbols inside this driver caused a conflict with
an existing function, which in turn results in a link error:
drivers/staging/sm750fb/sm750fb.o: In function `enable_dma':
ddk750_hwi2c.c:(.text.enable_dma+0x0): multiple definition of `enable_dma'
This adds a sm750_ prefix to each global symbol in the sm750fb
driver that does not already have one. I manually looked for the
symbols and then converted the driver using
for i in calc_pll_value format_pll_reg set_power_mode set_current_gate \
enable_2d_engine enable_dma enable_gpio enable_i2c hw_set2dformat \
hw_de_init hw_fillrect hw_copyarea hw_imageblit hw_cursor_enable \
hw_cursor_disable hw_cursor_setSize hw_cursor_setPos \
hw_cursor_setColor hw_cursor_setData hw_cursor_setData2 ;
do
sed -i "s:\<$i\>:sm750_$i:" drivers/staging/sm750fb/*.[ch]
done
Fixes: 03140dabf584 ("staging: sm750fb: Replace functions CamelCase naming with underscores.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace CamelCase function names with underscores to comply with
the standard kernel coding style.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Eliminates all checkpatch.pl BLOCK_COMMENT_STYLE warnings in
sm750fb, and coincidentally eliminates some line-length (80)
warnings.
Signed-off-by: Eric S. Stone <esstone@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace CamelCase function names with underscores to comply with
the standard kernel coding style.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The file ddk750_help.c contained only one function declaration,
so it was merged into ddk750_chip.c to simplify the driver.
Also, ddk750_help.h was merged into ddk750_chip.h to keep consistency.
With these changes a few global variables are removed and the function
ddk750_set_mmio is rewritten, so its purpose in the code is clearer.
Signed-off-by: Elise Lennion <elise.lennion@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the checkpatch.pl warning: "WARNING: do not add new
typedefs". Hiding a variables of type 'struct' is not always a good
idea,because when we passing them as parameters we tempt to forget that
in this proces we work with stack memory and allocatting struct on
stack is something that we should manage carefuly.
It is also delete the '_t' from the name of the structs and treat a line
over 80 character issue in ddk750_mode.c, that appear after my modification.
Signed-off-by: Mihaela Muraru <mihaela.muraru21@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace local implementation of rounded division (roundedDiv macro) with
the in-kernel implementation (DIV_ROUND_CLOSEST macro) in ddk750_chip.c
Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename CamelCased function getChipType to sm750_get_chip_type
(prefex with sm750 in order to make the context of
the function clear).
This issue was found by checkpatch.pl
Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replaces left shift operation (1 << d) by BIT(x) macro.
Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following warning types:
- line length
- block comment line * prefix
- trailing */ on a separate line
found by the checkpatch.pl tool in multiple block comments.
Fix a single spelling error in a comment.
Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix multiple line length warnings found by the checkpatch.pl tool
in ddk750_chip.c.
Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a patch to the ddk750_chip.c file that fixes up two block
comment coding style warnings found by the checkpatch.pl tool
Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a patch to the ddk750_chip.c file that fixes up a line length
warning found by the checkpatch.pl tool
Signed-off-by: Moshe Green <mgmoshes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a patch to the ddk750_chip.c file that fixes up a
line length warning found by the checkpatch.pl tool.
Signed-off-by: Moshe Green <paledirac@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
max_d is not initialized and should be set to the largest D
value of 6.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MHz() and roundedDiv macros are used only by ddk750_chip.c, so move
their definition there.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
<linux/kernel.h> already has 'abs', use it instead of custom absDiff
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace complex definition of DMA_ABORT_INTERRUPT register fields with
BIT() macro and use open-coded implementation for register manipulation
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace complex definition of PANEL_DISPLAY_CTRL register fields with BIT()
macro and use open-coded implementation for register manipulations.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The display control registers for primary and secondary display share some
of the bits and those bits can be defined in a single place and then used
for manipulations of the relevant registers.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace complex defintion of VGA_CONFIGURATION register fields with BIT()
macro and use open-coded implementation for VGA_CONFIGURATION
manipulations.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use more straight-forward definitions for multi-bit field of
PANEL_PLL_CTRL register and use open-coded implementation for register
manipulations.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace complex defintion of PLL_CTRL fields with BIT() macro and use
open-coded implementation for PLL register manipulations.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Several PLL control registers have the same layout and therefore the
field definitions may be shared for those registers. Renaming
definitions of PANEL_PLL_CTRL_* fields to more generic PLL_CTRL_* will
allow reusing these definitions for other PLL control registers.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix comment alignment and formatting to follow kernel coding style
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove HungarianCamelCase notation
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace complex definition of MODE0_GATE register fields with BIT() macro
and use open-coded implementation for register manipulations.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use more straight-forward definitions for multi-bit fields of
CURRENT_GATE register and use open-coded implementation for register
manipulation.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove HungarianCamelCase notation
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace complex definition of CURRENT_GATE register fields with BIT() macro
and use open-coded implementation for register manipulations.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use more straight-forward definitions for multi-bit fields of MISC_CTRL
register and use open-coded implementation for register manipulations.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace complex definition of MISC_CTRL register fields with BIT() macro
and use open-coded implementation for register manipulations.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove HungarianCamelCase notation
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The pllcalparam type is not used and can be removed.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The calcPllValues currently uses arrays of PLL parametres that contain
possible PLL control register field values and redundant data that is
calculated according to those values. The usage of these arrays can be
replaced with simple arithmetics.
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|