Age | Commit message (Collapse) | Author | Files | Lines |
|
Cleanup patch to remove the wid type not used in the code.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TODO item named "make spi and sdio components coexist in one build"
was apparently addressed a long time ago, but never removed from the
TODO file. However, the new patch that tries to address it actually
makes it worse again by duplicating the common parts of the driver into
two separate modules rather than sharing them. This also introduces a
build regression when one of the two is built-in while the other is a
loadable module:
drivers/staging/wilc1000/wilc_debugfs.o:(.data+0x10): undefined reference to `__this_module'
Reverting the patch makes it build again. I'm leaving the TODO file
modification though, as there is nothing left to do for this item.
A related problem however still seems to exist: one still cannot have
multiple concurrent instances of wilc1000 devices present in the
system, as there are lots of shared global variables such as
host_interface.c:static struct wilc_vif *periodic_rssi_vif;
wilc_sdio.c:static struct wilc_sdio g_sdio;
wilc_wlan.c:static enum chip_ps_states chip_ps_state = CHIP_WAKEDUP;
wilc_wlan.c:static u32 pending_acks;
wilc_wfi_cfgoperations.c:int wilc_connecting;
In order to have multiple instances working (sdio, spi, or mixed),
all such variables need to be dynamically allocated per instance and
stored in 'struct wilc' or one of the structures referenced by it.
Fixes: 9abc44ba4e2f ("staging: wilc1000: fix TODO to compile spi and sdio components in single module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup the copyright notice header from the WILC1000 files.
Replace copyright header of 'Atmel' & 'NewportMedia' with 'Microchip & its
subsidiaries'. Also added the same copyright notice header for all
wilc1000 driver source and header files.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changes to compile module component along with SPI and SDIO module.
Previously 'wilc1000.ko' used to generate along with wilc-spi.ko or
wilc1000-sdio.ko module. After these changes only wilc1000-spi.ko or
wilc1000-sdio.ko modules are required for SPI and SDIO respectively.
These changes are done to address below TODO item.
- make SPI and SDIO components coexist in one build
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup patch to rename enum AUTHTYPE to lowercase.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup patch to have enum in lowercase as per linux coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup patch to make use of existing enum 'ieee80211_eid' instead of
adding new enum in WILC for element ID's.
The below mapping is same to remove extra enum in WILC.
SUPP_RATES_IE -> WLAN_EID_SUPP_RATES
EXT_SUPP_RATES_IE -> WLAN_EID_EXT_SUPP_RATES
HT_CAPABILITY_IE -> WLAN_EID_HT_CAPABILITY
RSN_IE -> WLAN_EID_RSN
WPA_IE -> WLAN_EID_VENDOR_SPECIFIC
WMM_IE -> WLAN_EID_VENDOR_SPECIFIC
P2P_IE -> WLAN_EID_VENDOR_SPECIFIC
Also remove enum 'info_element_id' as its same as 'ieee80211_eid', below
the mapping of elements of enums which are used.
ITIM -> WLAN_EID_TIM
IDSPARMS -> WLAN_EID_DS_PARAMS
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup patch to remove extra enum defined to handle data rates.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup patch to remove unused enums.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove 'flag' function parameter in wilc_mac_indicate() as only one
condition was handled using that parameter. Also removed unnecessary
call to wilc_mac_indicate() as no operation was performed in that
function call.
After above changes below macros are not required anymore.
WILC_MAC_INDICATE_STATUS 0x1
WILC_MAC_INDICATE_SCAN 0x2
This changes also helped in resolving the line over 80 chars issue
found by checkatpch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename the mac status macro to follow the same naming style. Also move
them to keep together.
Renamed like below
>From ------------------------> To
WILC_MAC_STATUS_INIT -> MAC_STATUS_INIT
MAC_CONNECTED --------> MAC_STATUS_CONNECTED
MAC_DISCONNECTED -----> MAC_STATUS_DISCONNECTED
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove below #define which are not used in code:
WILC_MAC_STATUS_READY
WILC_MAC_STATUS_CONNECT
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup patch to remove unused #define.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleanup patch to remove the macros which are defined by not used.
Below mentioned macros are removed:
SCAN_DONE
SCAN_EVENT_DONE_ABORTED
WILC_WFI_RX_INTR
WILC_WFI_TX_INTR
WILC_WFI_TIMEOUT
WILC_WFI_DWELL_PASSIVE
WILC_WFI_DWELL_ACTIVE
MAX_SURVEY_RESULT_FRAG_SIZE
SURVEY_RESULT_LENGTH
NUM_BASIC_SWITCHES
NUM_FHSS_SWITCHES
NUM_11N_BASIC_SWITCHES
NUM_11N_HUT_SWITCHES
BA_SESSION_DEFAULT_BUFFER_SIZE
BA_SESSION_DEFAULT_TIMEOUT
BLOCK_ACK_REQ_SIZE
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix 'Avoid camelCase' issue found by checkpatch.pl script.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the "do not add new typedefs" issue found by checkpatch.pl
script
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes enum typedef BUS_RELEASE_T and define
"enum bus_release" to use instead of typedef.
checkpatch.pl not to add new typedef warning is fixed with this patch.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes enum typedef BUS_ACQUIRE_T and define
enum bus_acquire to use instead of typedef.
checkpatch.pl not to add new typedef warning is fixed with this patch.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes enum typedef CHIP_PS_STATE_T and introduce
enum chip_ps_states to use instead of typedef.
checkpatch.pl not to add new typedef warning is fixed with this patch.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removed the unnecessary enum typedef for BEACON_IE &
TX_RATE_T
It fix "WARNING: do not add new typedefs" reported by checkpatch.pl
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch has removed G_OPERATING_MODE_T typedef enum.
Now, its used as anonymous-enums for constants.
checkpatch.pl warning to avoid new typedef is fixes with this patch.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes typedef from enum BSSTYPE_T and
rename it to bss_types.
It fixes "WARNING: do not add new typdefs" warning
reported by checkpatch.pl.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the config packet format used in handle_set_wfi_drv_handler()
to align the host driver with the new format used in the wilc firmware.
The change updates the format in which the host driver provides the
firmware with the drv_handler index and also uses two new
fields viz. "mode" and 'name" in the config packet along with this index
to directly provide details about the interface and its mode to the
firmware instead of having multiple if-else statements in the host driver
to decide which interface to configure.
This change requires users to move to the newer version of the wilc
firmware(14.02 or higher) available on the vendor tree on github or on the
linux-firmware project. The existing firmware files on the linux-firmware
project are very old and best not used.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* Update the comments that refer to semaphores
* Remove redundant includes to semphore.h
Signed-off-by: Joshua Houghton <josh@awful.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes unused define.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes unused debug flags.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes INFINITE_SLEEP_TIME that is not used in the driver,
so just remove it.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes typedef from struct sdio_cmd53_t and renames it to
sdio_cmd53.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes unnecessary comment code in struct sdio_cmd53_t.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes typedef from struct sdio_cmd52_t and renames it to
sdio_cmd52.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the unused functions anymore related to the configuration
of the bus interface clock speed.
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes linux_wlan_common.h file and also removes the following
preprocessor at files that include it:
- #include 'linux_wlan_common.h'
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch moves WILC_MULTICAST_TABLE_SIZE define to wilc_wlan_if.h file.
This define is used to three files(host_interface.c,host_interface.h,
linux_wlan.c) these files already include wilc_wlan_if.h file in common.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch optimize code of wilc_get_chipid function.
u8 type changed to boolean type and removed unnecessary if statement.
Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch renames pBssid variable of tx_complete_data structure to bssid
to avoid camelcase.
Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch moves the function wilc_send_config_pkt to wilc_wlan.c which
handles transport since the purpose of the function is sending/getting of
config information. coreconfiguator.[ch] will be rename with frame.[ch] later.
The print codes of the function is removed also and they will be implemented
with netdev_xx print format later.
struct wid need to be moved to wilc_wlan_if.h which defines configure
informations.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch implements set_tx_power and get_tx_power of cfg80211_ops.
In addition, Id of HOST_IF_MSG_DEL_ALL_RX_BA_SESSIONS is changed with 37.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firmware supports sta/ap concurrency so mac index will be passed to wilc.
Remove wilc_set_wfi_drv_handler in scan and connect functions, and call
the function in ndo_open which is wilc_mac_open.
WID_SET_DRV_HANDLER value has been changed as well.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch passes struct wilc to the functions which use hif_func inside.
The function pointers of wilc_hif_func will pass wilc also in the later
patch. Pass wilc to the functions if necessary.
Flollowings are modified functions.
chip_wakeup
wilc_chip_sleep_manually
chip_allow_sleep
wilc_get_chipid
wilc_unknown_isr_ext
wilc_pllupdate_isr_ext
wilc_sleeptimer_isr_ext
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wilc_wlan_inp_t is an unnecessary indirection and requires linux_wlan.c
to have knowledge of the specific sdio and spi front-ends. This
removes the structure and places io_type directly inside the struct wilc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes unused variable os_private and delete
struct wilc_wlan_os_context_t since there is no members in it. Remove it's
related code also.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes function pointer io_deinit which is never used, and delete
it's related codes also.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes function pointer io_init of wilc_wlan_io_func_t and it's
related codes, and call the function linux_spi_init directly.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes spi_max_speed of wilc_wlan_io_func_t which is not used
anymore and removes union u and struct spi, which does not have members in it.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes spi_trx of wilc_wlan_io_func_t which is not used anymore.
Delete it's related codes also.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes spi_rx of wilc_wlan_io_func_t and it's related codes since
it is not used anymore.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes function pointer spi_tx of wilc_wlan_io_func_t because
it is not used anymore.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes sdio_set_default_speed of wilc_wlan_io_func_t which is
not used anymore and also remove struct sdio since it is empty.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes sdio_set_max_speed of wilc_wlan_io_func_t which is not
used any more.
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|