| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* 'osync_cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
fsync: wait for data writeout completion before calling ->fsync
vfs: Remove generic_osync_inode() and sync_page_range{_nolock}()
fat: Opencode sync_page_range_nolock()
pohmelfs: Use new syncing helper
xfs: Convert sync_page_range() to simple filemap_write_and_wait_range()
ocfs2: Update syncing after splicing to match generic version
ntfs: Use new syncing helpers and update comments
ext4: Remove syncing logic from ext4_file_write
ext3: Remove syncing logic from ext3_file_write
ext2: Update comment about generic_osync_inode
vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode
vfs: Rename generic_file_aio_write_nolock
ocfs2: Use __generic_file_aio_write instead of generic_file_aio_write_nolock
pohmelfs: Use __generic_file_aio_write instead of generic_file_aio_write_nolock
vfs: Remove syncing from generic_file_direct_write() and generic_file_buffered_write()
vfs: Export __generic_file_aio_write() and add some comments
vfs: Introduce filemap_fdatawait_range
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
netxen: update copyright
netxen: fix tx timeout recovery
netxen: fix file firmware leak
netxen: improve pci memory access
netxen: change firmware write size
tg3: Fix return ring size breakage
netxen: build fix for INET=n
cdc-phonet: autoconfigure Phonet address
Phonet: back-end for autoconfigured addresses
Phonet: fix netlink address dump error handling
ipv6: Add IFA_F_DADFAILED flag
net: Add DEVTYPE support for Ethernet based devices
mv643xx_eth.c: remove unused txq_set_wrr()
ucc_geth: Fix hangs after switching from full to half duplex
ucc_geth: Rearrange some code to avoid forward declarations
phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
drivers/net/phy: introduce missing kfree
drivers/net/wan: introduce missing kfree
net: force bridge module(s) to be GPL
Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
...
Fixed up trivial conflicts:
- arch/x86/include/asm/socket.h
converted to <asm-generic/socket.h> in the x86 tree. The generic
header has the same new #define's, so that works out fine.
- drivers/net/tun.c
fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
switched over to using 'tun->socket.sk' instead of the redundantly
available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
to the TUN driver") which added a new 'tun->sk' use.
Noted in 'next' by Stephen Rothwell.
|
|
Use new generic_write_sync() helper instead of sync_page_range().
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Use new helper __generic_file_aio_write(). Since the fs takes care of syncing
by itself afterwards, there are no more changes needed.
CC: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
* 'writeback' of git://git.kernel.dk/linux-2.6-block:
writeback: check for registered bdi in flusher add and inode dirty
writeback: add name to backing_dev_info
writeback: add some debug inode list counters to bdi stats
writeback: get rid of pdflush completely
writeback: switch to per-bdi threads for flushing data
writeback: move dirty inodes from super_block to backing_dev_info
writeback: get rid of generic_sync_sb_inodes() export
|
|
This adds two new exported functions:
- writeback_inodes_sb(), which only attempts to writeback dirty inodes on
this super_block, for WB_SYNC_NONE writeout.
- sync_inodes_sb(), which writes out all dirty inodes on this super_block
and also waits for the IO to complete.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
No need to put ethtool_ops in data, they should be const.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The networking code checks CAP_SYS_MODULE before using request_module() to
try to load a kernel module. While this seems reasonable it's actually
weakening system security since we have to allow CAP_SYS_MODULE for things
like /sbin/ip and bluetoothd which need to be able to trigger module loads.
CAP_SYS_MODULE actually grants those binaries the ability to directly load
any code into the kernel. We should instead be protecting modprobe and the
modules on disk, rather than granting random programs the ability to load code
directly into the kernel. Instead we are going to gate those networking checks
on CAP_NET_ADMIN which still limits them to root but which does not grant
those processes the ability to load arbitrary code into the kernel.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Paul Moore <paul.moore@hp.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
Conflicts:
arch/microblaze/include/asm/socket.h
|
|
usb_buffer_map_sg() may return -1. This will result in a read from
pdx->PixelUrb[frameInfo][-1]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch adds PCI dependencies to staging drivers that require it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This fixes a build error when selecting the rtl8192su driver as a
module. This has been reported by me, and the opensuse kernel developer
team, and I finally tracked it down.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API
The sanity check this patch introduced triggers on shutdown, apparently due to
threads having already exited by the time BUG_ON() is reached.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Teoh <htmldeveloper@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Linksys WUSB100, Belkin F5D8053 N, Planex Communications unknown model.
Signed-off-by: Jakob Gruber <jakob.gruber@kabelnet.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Required for vmalloc_32 and vfree declarations on non-x86 platforms.
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This driver is not needed, as the existing mos7840 driver works
properly for this device.
Thanks to Russell Lang for doing the work to figure this out.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
I'm about to merge "oom: move oom_adj value from task_struct to
mm_struct", and this fixup is needed to repair linux-next's
drivers/staging/android/lowmemorykiller.c.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
a standard memory leak, as later allocations may fail even if prior
allocations did not. Then the prior allocations must be undone.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
tty_port_tty_get() was called without a corresponding tty_kref_put()
in qt_read_bulk_callback() and qt_close().
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The connector documentation states that the argument to the callback
function is always a pointer to a struct cn_msg, but rather than encode it
in the API itself, it uses a void pointer everywhere. This doesn't make
much sense to encode the pointer in documentation as it prevents proper C
type checking from occurring and can easily allow people to use the wrong
pointer type. So convert the argument type to an explicit struct cn_msg
pointer.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
Staging: rtl8192su: convert to net_device_ops
Staging: serqt_usb2: declare qt_open static in serqt_usb2
Staging: serqt_usb2: fix qt_close parameters in serqt_usb2
Staging: comedi: jr3_pci.c: add required includes
Staging: meilhaus: add email address to TODO
Staging: rspiusb: use NULL virtual address instead of a bogus one
Staging: vt6655: compile fix
Staging: rt2870: Add USB ID for Sitecom WL-608
|
|
Commit 405f55712dfe464b3240d7816cc4fe4174831be2 ("headers: smp_lock.h
redux") broke the build of two staging drivers. Fix them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
See commit 2d0ddec5b2b (mac80211: unify config_interface and
bss_info_changed)
This fixes a build error.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The current s626 comedi driver in staging conflicts with philips SAA7146
media/dvb based cards, because it claims the same vendor:device pci id
for all subdevice/subvendor ids. What happens is that for people that have a
philips SAA7146 media/dvb based card, s626 if available gets loaded by udev
and makes system freeze (https://qa.mandriva.com/show_bug.cgi?id=51445).
The s626 driver shouldn't claim all 1131:7146 devices. Fix this by
specifying specific known subvendor:subdevice ids in its pci id table
list.
Also s626_attach is modified to use now pci_get_subsys instead of
pci_get_device as reported by Ian Abbott, and now we loop over pci id
table entries in case more ids are added in the future.
Reference: http://lkml.org/lkml/2009/6/16/552
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
(adapted from the rtl8187se patch)
ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.
length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17
This fix uses strl{cpy,cat} in addition to the reduction of the total
possible length of the output string by a char.
It can be applied to 2.6.30-stable as well.
Signed-off-by: Dan Aloni <dan@aloni.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
I repeatedly get __stack_chk_fail panic()s with this driver before
applying the attached fix.
ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.
length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17
This fix uses strl{cpy,cat} in addition to the reduction of the total
possible length of the output string by a char.
It can be applied to 2.6.30-stable as well.
Signed-off-by: Dan Aloni <dan@aloni.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit e3804cbebb67887879102925961d41b503f7fbe3 removed
COMPAT_NET_DEV_OPS so this change is needed to make rtl8192su
buildable again.
Loosely based on Alexander's patch for rtl8187se, untested.
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The parameter list for qt_close() was from the old non usb-serial
driver.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Fix this build errors:
jr3_pci.c:739: error: 'jiffies' undeclared
jr3_pci.c:748: error: implicit declaration of function 'msecs_to_jiffies'
jr3_pci.c:763: error: implicit declaration of function 'add_timer'
jr3_pci.c:790: error: implicit declaration of function 'init_timer'
jr3_pci.c:951: error: implicit declaration of function 'del_timer_sync'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Meilhaus Support also wants to be notified of changes to these drivers.
Cc: David Kiliani <mail@davidkiliani.de>
Cc: Meilhaus Support <support@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The main problem here is that I just cannot see how this could ever
be correct:
usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i], pdx->udev, epAddr,
(dma_addr_t *) sg_dma_address(&pdx->sgl[frameInfo][i]),
sg_dma_len(&pdx->sgl[frameInfo][i]),
You cannot take a DMA address, cast it to a _pointer to_ a DMA address,
and then regard it as a virtual address of the transfer buffer.
However, finding the right virtual address was too hard for me,
so I just stubbed it with NULL. At least usbmon won't oops then
(it will not show any data but it's better than crashing).
Also, too big a buffer was allocated elsewhere.
And since we're at it, drop clearly unnecessary usb_buffer_alloc too,
leaving it where it may be useful.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
At least make it compile
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Add the USB id 0x0DF6,0x003F to the rt2870.h file such that the
Sitecom WL-608 device will be recognized by this driver.
Signed-off-by: Jorrit Schippers <jorrit@ncode.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Within mac80211, we often need to copy the rx status into
skb->cb. This is wasteful, as drivers could be building it
in there to start with. This patch changes the API so that
drivers are expected to pass the RX status in skb->cb, now
accessible as IEEE80211_SKB_RXCB(skb). It also updates all
drivers to pass the rx status in there, but only by making
them memcpy() it into place before the call to the receive
function (ieee80211_rx(_irqsafe)). Each driver can now be
optimised on its own schedule.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
This patch converts the remaining occurences of raw return values to their
symbolic counterparts in ndo_start_xmit() functions that were missed by the
previous automatic conversion.
Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero
is changed to explicitly use NETDEV_TX_OK.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is the result of an automatic spatch transformation to convert
all ndo_start_xmit() return values of 0 to NETDEV_TX_OK.
Some occurences are missed by the automatic conversion, those will be
handled in a seperate patch.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
almost no users in the tree; and the few that use them treat them
like NET_RX_DROP.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The existing code had the following race:
Thread-1 Thread-2
inc/read in_use
inc/read in_use
inc tx_free_list[qos].len
inc tx_free_list[qos].len
The actual in_use value was incremented twice, but thread-1 is going
to free memory based on its stale value, and will free one too many
times. The result is that memory is freed back to the kernel while
its packet is still in the transmit buffer. If the memory is
overwritten before it is transmitted, the hardware will put a valid
checksum on it and send it out (just like it does with good packets).
If by chance the TCP flags are clobbered but not the addresses or
ports, the result can be a broken TCP stream.
The fix is to track the number of freed packets in a single location
(a Fetch-and-Add Unit register). That way it can never get out of sync
with itself.
We try to free up to MAX_SKB_TO_FREE (currently 10) buffers at a time.
If fewer are available we adjust the free count with the difference.
The action of claiming buffers to free is atomic so two threads cannot
claim the same buffers.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Convert the driver to use net_device_ops as it is now mandatory.
Also compensate for the removal of struct sk_buff's dst field.
The changes are mostly mechanical, the content of ethernet-common.c
was moved to ethernet.c and ethernet-common.{c,h} are removed.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove the replicated urban legends from the comments and fix a couple of
other silly calls
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some of the comedi drivers need timer.h to build properly, so put it
in the comedidev.h file to fix these errors.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This updates the udlfb to the 0.2.3 version.
From: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
There are others remaining due to the __iomem namespace of the
framebuffer data pointer.
Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This cleans up a bunch of checkpatch.pl warnings in the udlfb.c file.
Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This cleans up a bunch of checkpatch.pl warnings in the udlfb.h file.
Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This adds the udlfb driver to the build system
Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This adds the udlfb driver, a framebuffer driver for DisplayLink devices.
From: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
These comments contribute nothing to the code, and most were just cut
and pasted from another driver.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
They are not needed, and the version one was pointless now that the code
is merged into the tree.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
Linus Torvalds
Jan Kara
Jens Axboe
Stephen Hemminger
Eric Paris
David S. Miller
Roel Kluin
Jeff Mahoney
Greg Kroah-Hartman
Mike Galbraith
Jakob Gruber
Amit Kucheria
David Rientjes
Oliver Neukum
Bill Pemberton
Mike Frysinger
Jean Delvare
Alexander Beregalov
Herton Ronaldo Krzesinski
Dan Aloni
Bartlomiej Zolnierkiewicz
Pete Zaitcev
Alan Cox
Jorrit Schippers
Johannes Berg
Patrick McHardy
Florian Westphal
David Daney
Roberto De Ioris