| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.
According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether.
As most PCs and phones lack WiMAX hardware support, the remaining
networks tend to use standalone routers. These almost certainly
run Linux, but not a modern kernel or the mainline wimax driver stack.
NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the
www.linuxwimax.org
site had already shut down earlier.
WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.
Move all files into drivers/staging/wimax, including the uapi header
files and documentation, to make it easier to remove it when it gets
to that. Only minimal changes are made to the source files, in order
to make it possible to port patches across the move.
Also remove the MAINTAINERS entry that refers to a broken mailing
list and website.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Suggested-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Commit 453431a54934 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.
Since then a few more instances of kzfree() have slipped in.
Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
Liu)
- Add schedule point in pci_read_config() to reduce max latency
(Jiang Biao)
- Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)
Resource management:
- Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
Pieralisi)
PCIe native device hotplug:
- Reduce noisiness on hot removal (Lukas Wunner)
Power management:
- Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
that was done on the basis of spec typo (Bjorn Helgaas)
- Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
ambiguity (Krzysztof Wilczyński)
- Remove unused pcibios_pm_ops (Vaibhav Gupta)
IOMMU:
- Enable Translation Blocking for external devices to harden against
DMA attacks (Rajat Jain)
Error handling:
- Add an ACPI APEI notifier chain for vendor CPER records to enable
device-specific error handling (Shiju Jose)
ASPM:
- Remove struct aspm_register_info to simplify code (Saheed O.
Bolarinwa)
Amlogic Meson PCIe controller driver:
- Build as module by default (Kevin Hilman)
Ampere Altra PCIe controller driver:
- Add MCFG quirk to work around non-standard ECAM implementation
(Tuan Phan)
Broadcom iProc PCIe controller driver:
- Set affinity mask on MSI interrupts (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
- Add DT bindings for more Brcmstb chips (Jim Quinlan)
- Add bcm7278 register info (Jim Quinlan)
- Add bcm7278 PERST# support (Jim Quinlan)
- Add suspend and resume pm_ops (Jim Quinlan)
- Add control of rescal reset (Jim Quinlan)
- Set additional internal memory DMA viewport sizes (Jim Quinlan)
- Accommodate MSI for older chips (Jim Quinlan)
- Set bus max burst size by chip type (Jim Quinlan)
- Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)
Freescale i.MX6 PCIe controller driver:
- Use dev_err_probe() to reduce redundant messages (Anson Huang)
Freescale Layerscape PCIe controller driver:
- Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
- Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
- Add endpoint test support for lS1088a (Xiaowei Bao)
- Add MSI-X support for ls1088a (Xiaowei Bao)
HiSilicon HIP PCIe controller driver:
- Handle HIP-specific errors via ACPI APEI (Yicong Yang)
HiSilicon Kirin PCIe controller driver:
- Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)
Intel VMD host bridge driver:
- Factor out physical offset, bus offset, IRQ domain, IRQ allocation
(Jon Derrick)
- Use generic PCI PM correctly (Jon Derrick)
Marvell Aardvark PCIe controller driver:
- Fix compilation on s390 (Pali Rohár)
- Implement driver 'remove' function and allow to build it as module
(Pali Rohár)
- Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
- Convert mvebu a3700 internal SMCC firmware return codes to errno
(Pali Rohár)
- Fix initialization with old Marvell's Arm Trusted Firmware (Pali
Rohár)
Microsoft Hyper-V host bridge driver:
- Fix hibernation in case interrupts are not re-created (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Stop checking return value of debugfs_create() functions (Greg
Kroah-Hartman)
- Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)
Qualcomm PCIe controller driver:
- Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)
Renesas R-Car PCIe controller driver:
- Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
(Lad Prabhakar)
- Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
- Add DT support for r8a7742 (Lad Prabhakar)
Socionext UniPhier Pro5 controller driver:
- Add DT descriptions of iATU register (host and endpoint) (Kunihiko
Hayashi)
Synopsys DesignWare PCIe controller driver:
- Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
unavoidable) (Hou Zhiqiang)
- Fix endpoint Header Type check so multi-function devices work (Hou
Zhiqiang)
- Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
- Stop leaking MSI page in suspend/resume (Jisheng Zhang)
- Add common iATU register support instead of keystone-specific code
(Kunihiko Hayashi)
- Major config space access and other cleanups in dwc core and
drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
kirin, meson, qcom, tegra) (Rob Herring)
- Add multiple PFs support for endpoint (Xiaowei Bao)
- Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)
Miscellaneous:
- Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
- Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
- Fix "cast truncates bits from constant value" warnings (Gustavo
Pimentel)
- Remove redundant zeroing for sg_init_table() (Julia Lawall)
- Use scnprintf(), not snprintf(), in sysfs "show" functions
(Krzysztof Wilczyński)
- Remove unused assignments (Krzysztof Wilczyński)
- Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
- Simplify bool comparisons (Krzysztof Wilczyński)
- Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
Miao)
- Simplify return expressions (Qinglang Miao)"
* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
PCI: vmd: Update VMD PM to correctly use generic PCI PM
PCI: vmd: Create IRQ allocation helper
PCI: vmd: Create IRQ Domain configuration helper
PCI: vmd: Create bus offset configuration helper
PCI: vmd: Create physical offset helper
PCI: v3-semi: Remove unneeded break
PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
PCI/ASPM: Remove struct pcie_link_state.l1ss
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
PCI/ASPM: Remove struct aspm_register_info.latency_encoding
PCI/ASPM: Remove struct aspm_register_info.enabled
PCI/ASPM: Remove struct aspm_register_info.support
PCI/ASPM: Use 'parent' and 'child' for readability
PCI/ASPM: Move LTR path check to where it's used
PCI/ASPM: Move pci_clear_and_set_dword() earlier
PCI: dwc: Fix MSI page leakage in suspend/resume
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
|
|
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
|
|
Pull staging / IIO driver updates from Greg KH:
"Here is the large set of staging and IIO driver updates for 5.10-rc1.
Included in here are:
- new IIO drivers
- new IIO driver frameworks
- various IIO driver fixes and updates
- IIO device tree conversions to yaml
- so many minor staging driver coding style cleanups
- most cdev driver moved out of staging
- no staging drivers added or removed
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits)
staging: comedi: check validity of wMaxPacketSize of usb endpoints found
staging: wfx: improve robustness of wfx_get_hw_rate()
staging: wfx: drop unicode characters from strings
staging: wfx: gpiod_get_value() can return an error
staging: wfx: increase robustness of hif_generic_confirm()
staging: wfx: wfx_init_common() returns NULL on error
staging: wfx: standardize the error when vif does not exist
staging: wfx: check memory allocation
staging: wfx: improve error handling of hif_join()
staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c
staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c
staging: rtl8188eu: Fix long lines
dt-bindings: staging: wfx: silabs,wfx yaml conversion
staging: wfx: update copyrights dates
staging: wfx: fix QoS priority for slow buses
staging: wfx: fix BA sessions for older firmwares
staging: wfx: remove remaining code of 'secure link' feature
staging: wfx: fix handling of MMIC error
staging: vchiq: Fix list_for_each exit tests
staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t
...
|
|
Pull SPDX updates from Greg KH:
"Here are some SPDX-specific changes for 5.10-rc1.
They include:
- driver fixes to make spdxcheck.pl work properly
- add GFDL licenses as "deprecated" but required due to some of our
documentation using them
- add Zlib license as "deprecated" but required because we have code
with this license in the tree.
- convert some drivers to have SPDX identifiers that previously
didn't have them.
All have been in linux-next for a very long time with no reported
issues"
* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
scripts/spdxcheck.py: handle license identifiers in XML comments
net/mlx5: IPsec: make spdxcheck.py happy
LICENSES/deprecated: add Zlib license text
LICENSE: add GFDL deprecated licenses
net/qla3xxx: Convert to SPDX license identifiers
net/qlge: Convert to SPDX license identifiers
net/qlcnic: Convert to SPDX license identifiers
scsi/qla2xxx: Convert to SPDX license identifiers
scsi/qla4xxx: Convert to SPDX license identifiers
|
|
Pull media updates from Mauro Carvalho Chehab:
- the usbvision driver was dropped from staging
- the Zoran driver were re-added at staging. It gained lots of
improvements, and was converted to use videobuf2 API
- a new virtual driver (vidtv) was added in order to allow testing the
digital TV framework and APIs
- the media uAPI documentation gained a glossary with commonly used
terms, helping to simplify some parts of the docs
- more cleanups at the atomisp driver
- Mediatek VPU gained support for MT8183
- added support for codecs with supports doing colorspace conversion
(CSC)
- support for CSC API was added at vivid and rksip1 drivers
- added a helper core support and uAPI for better supporting H.264
codecs
- added support for Renesas R8A774E1
- use the new SPDX GFDL-1.1-no-invariants-or-later license on media
uAPI docs, instead of a license text
- Venus driver has gained VP9 codec support
- lots of other cleanups and driver improvements
* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
media: tvp7002: fix uninitialized variable warning
media: s5k5baf: drop 'data' field in struct s5k5baf_fw
media: dt-bindings: media: venus: Add an optional power domain for perf voting
media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
media: staging: rkisp1: uapi: Do not use BIT() macro
media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
media: usbtv: Fix refcounting mixup
media: zoran.rst: place it at the right place this time
media: add Zoran cardlist
media: admin-guide: update cardlists
media: siano: rename a duplicated card string
media: zoran: move documentation file to the right place
media: atomisp: fixes build breakage for ISP2400 due to a cleanup
media: zoran: fix mixed case on vars
media: zoran: get rid of an unused var
media: zoran: use upper case for card types
media: zoran: fix sparse warnings
media: zoran: fix smatch warning
media: zoran: update TODO
...
|
|
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
|
|
While finding usb endpoints in vmk80xx_find_usb_endpoints(), check if
wMaxPacketSize = 0 for the endpoints found.
Some devices have isochronous endpoints that have wMaxPacketSize = 0
(as required by the USB-2 spec).
However, since this doesn't apply here, wMaxPacketSize = 0 can be
considered to be invalid.
Reported-by: syzbot+009f546aa1370056b1c2@syzkaller.appspotmail.com
Tested-by: syzbot+009f546aa1370056b1c2@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201010082933.5417-1-anant.thazhemadam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains:
data_tx.c:37 wfx_get_hw_rate() warn: constraint '(struct ieee80211_supported_band)->bitrates' overflow 'band->bitrates' 0 <= abs_rl '0-127' user_rl '' required = '(struct ieee80211_supported_band)->n_bitrates'
23 struct ieee80211_supported_band *band;
24
25 if (rate->idx < 0)
26 return -1;
27 if (rate->flags & IEEE80211_TX_RC_MCS) {
28 if (rate->idx > 7) {
29 WARN(1, "wrong rate->idx value: %d", rate->idx);
30 return -1;
31 }
32 return rate->idx + 14;
33 }
34 // WFx only support 2GHz, else band information should be retrieved
35 // from ieee80211_tx_info
36 band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
37 return band->bitrates[rate->idx].hw_value;
Add a simple check to make Smatch happy.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201009171307.864608-9-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains:
hif_rx.c:235 hif_generic_indication() warn: format string contains non-ascii character '\xc2'
hif_rx.c:235 hif_generic_indication() warn: format string contains non-ascii character '\xb0'
234 if (!wfx_api_older_than(wdev, 1, 4))
235 dev_info(wdev->dev, "Rx test ongoing. Temperature: %d°C\n",
^
236 body->data.rx_stats.current_temp);
So, replace the unicode character.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201009171307.864608-8-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains:
hif_rx.c:98 hif_wakeup_indication() warn: 'gpiod_get_value(wdev->pdata.gpio_wakeup)' returns positive and negative
bh.c:24 device_wakeup() warn: 'gpiod_get_value_cansleep(wdev->pdata.gpio_wakeup)' returns positive and negative
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201009171307.864608-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains:
drivers/staging/wfx/hif_rx.c:26 hif_generic_confirm() warn: negative user subtract: 0-u16max - 4
20 static int hif_generic_confirm(struct wfx_dev *wdev,
21 const struct hif_msg *hif, const void *buf)
22 {
23 // All confirm messages start with status
24 int status = le32_to_cpup((__le32 *)buf);
25 int cmd = hif->id;
26 int len = le16_to_cpu(hif->len) - 4; // drop header
^^^^^
27
28 WARN(!mutex_is_locked(&wdev->hif_cmd.lock), "data locking error");
In fact, rx_helper() already make the necessary checks on the value of
hif->len. Never mind, add an explicit check to make Smatch happy.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201009171307.864608-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains:
bus_spi.c:228 wfx_spi_probe() warn: 'bus->core' could be an error pointer
bus_sdio.c:221 wfx_sdio_probe() warn: 'bus->core' could be an error pointer
bus->core contains the result of wfx_init_common(). With this patch,
wfx_init_common() returns a valid pointer or NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201009171307.864608-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains:
drivers/staging/wfx/hif_rx.c:177 hif_scan_complete_indication() warn: potential NULL parameter dereference 'wvif'
drivers/staging/wfx/data_tx.c:576 wfx_flush() warn: potential NULL parameter dereference 'wvif'
Indeed, if the vif id returned by the device does not exist anymore,
wdev_to_wvif() could return NULL.
In add, the error is not handled uniformly in the code, sometime a
WARN() is displayed but code continue, sometime a dev_warn() is
displayed, sometime it is just not tested, ...
This patch standardize that.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201009171307.864608-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains:
main.c:228 wfx_send_pdata_pds() warn: potential NULL parameter dereference 'tmp_buf'
227 tmp_buf = kmemdup(pds->data, pds->size, GFP_KERNEL);
228 ret = wfx_send_pds(wdev, tmp_buf, pds->size);
^^^^^^^
229 kfree(tmp_buf);
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201009171307.864608-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Smatch complains:
hif_tx.c:319 hif_join() error: we previously assumed 'channel' could be null (see line 315)
311 if (!hif)
312 return -ENOMEM;
313 body->infrastructure_bss_mode = !conf->ibss_joined;
314 body->short_preamble = conf->use_short_preamble;
315 if (channel && channel->flags & IEEE80211_CHAN_NO_IR)
^^^^^^^
316 body->probe_for_join = 0;
317 else
318 body->probe_for_join = 1;
319 body->channel_number = channel->hw_value;
^^^^^^^^^^^^^^^^^
320 body->beacon_interval = cpu_to_le32(conf->beacon_int);
321 body->basic_rate_set =
Indeed, channel can't be NULL (else I would have seen plenty of Ooops
this past year). This patch explicitly claims this restriction.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201009171307.864608-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some static functions in the dpaa2-switch driver don't have a distinct
prefix and this is becoming an inconvenience when looking at, for
example, a perf top output and trying to determine easily which entries
are dpaa2 switch related. Ammend this by adding the prefix to all the
functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201009153000.14550-3-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some static functions in the dpaa2-switch driver don't have a distinct
prefix and this is becoming an inconvenience when looking at, for
example, a perf top output and trying to determine easily which entries
are dpaa2 switch related. Ammend this by adding the prefix to all the
functions.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20201009153000.14550-2-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fix long lines found by checkpatch.
Signed-off-by: Fan Fei <ffclaire1224@gmail.com>
Link: https://lore.kernel.org/r/20201008185524.brl467kucslxoxci@ubuntu-T470
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The BIT() macro is not available to uAPI headers, replace the few usages
of it by open coding it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The device can be connected on SPI or on SDIO. The original file
described the two options separately. So, most of the file had to be
rewritten in order to match with the Yaml requirements.
Some device requirements are still written in the comments since they
cannot been expressed with the current scheme (e.g. reg must be set to 1
with SDIO, interrupt is mandatory with SPI, reset-gpio in SPI is
replaced by mmc-pwrseq in SDIO, etc...).
The examples provided have also been reworked in order to make
dt_binding_check happy.
Finally, also fix typo in the name of the file (siliabs instead of
silabs)
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-7-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Most of the files have been modified in 2020, so update the copyright
notices.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device is in charge of respecting the QoS constraints. The driver
have to ensure that all the queues contain data and the device choose
the right queue to send.
The things starts to be more difficult when the bandwidth of the bus is
lower than the bandwidth of the WiFi. The device quickly sends the
frames of the highest priority queue. Then, it starts to send frames
from a lower priority queue. Though, there are still some high priority
frames waiting in the driver.
To work around this problem, this patch add some priorities to each
queue. The weigh of the queue was (roughly) calculated experimentally by
checking the speed ratio of each queue when the bus does not limit the
traffic:
- Be/Bk -> 20Mbps/10Mbps
- Vi/Be -> 36Mbps/180Kbps
- Vo/Be -> 35Mbps/600Kbps
- Vi/Vo -> 24Mbps/12Mbps
So, if we fix the weigh of the Background to 1, the weight of Best
Effort should be 2. The weight of Video should be 116. However, since
there is only 32 queues, it make no sense to use a value greater than
64[1]. And finally, the weight of the Voice is set to 128.
[1] Because of this approximation, with very slow bus, we can still
observe frame starvation when we measure the speed ratio of Vi/Be. It is
around 35Mbps/1Mbps (instead of 36Mbps/180Kbps). However, it is still in
accepted error range.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Firmwares with API < 3.6 do not forward DELBA requests. Thus, when a
Block Ack session is restarted, the reordering buffer is not flushed and
the received sequence number is not contiguous. Therefore, mac80211
starts to wait some missing frames that it will never receive.
This patch disables the reordering buffer for old firmware. It is
harmless when the network is unencrypted. When the network is encrypted,
the non-contiguous frames will be thrown away by the TKIP/CCMP replay
protection. So, the user will observe some packet loss with UDP and
performance drop with TCP.
Fixes: e5da5fbd7741 ("staging: wfx: fix CCMP/TKIP replay protection")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit e8d607ce0c81 ("staging: wfx: drop 'secure link' feature") had
removed the 'secure link' feature. However, a few lines of codes were
yet here.
Fixes: e8d607ce0c81 ("staging: wfx: drop 'secure link' feature")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As expected, when the device detect a MMIC error, it returns a specific
status. However, it also strip IV from the frame (don't ask me why).
So, with the current code, mac80211 detects a corrupted frame and it
drops it before it handle the MMIC error. The expected behavior would be
to detect MMIC error then to renegotiate the EAP session.
So, this patch correctly informs mac80211 that IV is not available. So,
mac80211 correctly takes into account the MMIC error.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20201007101943.749898-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After a list_for_each_entry() loop, the list iterator is always non-NULL
so these conditions don't work. If the "waiter" is not found then this
results in an out of bounds access.
I have fixed it by introducing a new "found" variable. In one case, I
used an else statement for readability.
Fixes: 46e4b9ec4fa4 ("staging: vchiq_arm: use list_for_each_entry when accessing bulk_waiter_list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201006134748.GA2076872@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
(struct gb_audio_ctl_elem_info*)->type has the type of __u8 so there is no
concern about the byte order. __force is safe to use.
Found by sparse,
$ make C=2 drivers/staging/greybus/
drivers/staging/greybus/audio_topology.c:185:24: warning: cast to restricted snd_ctl_elem_type_t
Suggested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20201002233057.74462-3-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
snd_soc_pcm_stream.formats should use the bitmask SNDRV_PCM_FMTBIT_*
instead of the sequential integers SNDRV_PCM_FORMAT_* as explained by
commit e712bfca1ac1f63f622f87c2f33b57608f2a4d19
("ASoC: codecs: use SNDRV_PCM_FMTBIT_* for format bitmask").
Found by sparse,
$ make C=2 drivers/staging/greybus/
drivers/staging/greybus/audio_codec.c:691:36: warning: incorrect type in initializer (different base types)
drivers/staging/greybus/audio_codec.c:691:36: expected unsigned long long [usertype] formats
drivers/staging/greybus/audio_codec.c:691:36: got restricted snd_pcm_format_t [usertype]
drivers/staging/greybus/audio_codec.c:701:36: warning: incorrect type in initializer (different base types)
drivers/staging/greybus/audio_codec.c:701:36: expected unsigned long long [usertype] formats
drivers/staging/greybus/audio_codec.c:701:36: got restricted snd_pcm_format_t [usertype]
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20201002233057.74462-2-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fix the following warnings from sparse,
$ make C=2 drivers/staging/greybus/
drivers/staging/greybus/audio_module.c:222:25: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_module.c:222:25: expected restricted __le16 [usertype] data_cport
drivers/staging/greybus/audio_module.c:222:25: got unsigned short [usertype] intf_cport_id
drivers/staging/greybus/audio_topology.c:460:40: warning: restricted __le32 degrades to integer
drivers/staging/greybus/audio_topology.c:691:41: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:691:41: expected unsigned int access
drivers/staging/greybus/audio_topology.c:691:41: got restricted __le32 [usertype] access
drivers/staging/greybus/audio_topology.c:746:44: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:746:44: expected unsigned int
drivers/staging/greybus/audio_topology.c:746:44: got restricted __le32
drivers/staging/greybus/audio_topology.c:748:52: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:748:52: expected unsigned int
drivers/staging/greybus/audio_topology.c:748:52: got restricted __le32
drivers/staging/greybus/audio_topology.c:802:42: warning: restricted __le32 degrades to integer
drivers/staging/greybus/audio_topology.c:805:50: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:805:50: expected restricted __le32
drivers/staging/greybus/audio_topology.c:805:50: got unsigned int
drivers/staging/greybus/audio_topology.c:814:50: warning: restricted __le32 degrades to integer
drivers/staging/greybus/audio_topology.c:817:58: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:817:58: expected restricted __le32
drivers/staging/greybus/audio_topology.c:817:58: got unsigned int
drivers/staging/greybus/audio_topology.c:889:25: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:889:25: expected unsigned int access
drivers/staging/greybus/audio_topology.c:889:25: got restricted __le32 [usertype] access
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20201002233057.74462-1-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reduce line length, simplify refactoring.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Link: https://lore.kernel.org/r/20201004060921.8908-1-insafonov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace _cancel_timer with API function del_timer_sync.
One instance of del_timer_sync is moved and an unnecessary pair of spin
locks are removed.
Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20201004011743.10750-8-ross.schm.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace RTW_GET_BE16 macro with get_unlaligned_be16.
Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20201004011743.10750-7-ross.schm.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace RTW_GET_LE16 macro with get_unaligned_le16.
Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20201004011743.10750-6-ross.schm.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace RTW_GET_BE24 macro with get_unaligned_be24.
Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20201004011743.10750-5-ross.schm.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove several macros in osdep_service.h because they are not used.
Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20201004011743.10750-4-ross.schm.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use round_up instead of inline _RND8.
Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20201004011743.10750-3-ross.schm.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use round_up instead of inline _RND4.
Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20201004011743.10750-2-ross.schm.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use round_up instead of define RND4.
Signed-off-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20201004011743.10750-1-ross.schm.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes commit 0107635e15ac
("staging: qlge: replace pr_err with netdev_err") which introduced an
build breakage of missing `struct ql_adapter *qdev` for some functions
and a warning of type mismatch with dumping enabled, i.e.,
$ make CFLAGS_MODULE="-DQL_ALL_DUMP -DQL_OB_DUMP -DQL_CB_DUMP \
-DQL_IB_DUMP -DQL_REG_DUMP -DQL_DEV_DUMP" M=drivers/staging/qlge
qlge_dbg.c: In function ‘ql_dump_ob_mac_rsp’:
qlge_dbg.c:2051:13: error: ‘qdev’ undeclared (first use in this function); did you mean ‘cdev’?
2051 | netdev_err(qdev->ndev, "%s\n", __func__);
| ^~~~
qlge_dbg.c: In function ‘ql_dump_routing_entries’:
qlge_dbg.c:1435:10: warning: format ‘%s’ expects argument of type ‘char *’, but argument 3 has type ‘int’ [-Wformat=]
1435 | "%s: Routing Mask %d = 0x%.08x\n",
| ~^
| |
| char *
| %d
1436 | i, value);
| ~
| |
| int
qlge_dbg.c:1435:37: warning: format ‘%x’ expects a matching ‘unsigned int’ argument [-Wformat=]
1435 | "%s: Routing Mask %d = 0x%.08x\n",
| ~~~~^
| |
| unsigned int
Note that now ql_dump_rx_ring/ql_dump_tx_ring won't check if the passed
parameter is a null pointer.
Fixes: 0107635e15ac ("staging: qlge: replace pr_err with netdev_err")
Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Suggested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Reviewed-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20201002235941.77062-1-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I was too quick moving zoran.rst... it ends that the original
patch didn't do the right thing and forgot to update the files
that references it.
Fix it.
Fixes: 6b90346919d4 ("media: zoran: move documentation file to the right place")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Linux 5.9-rc7
* tag 'v5.9-rc7': (683 commits)
Linux 5.9-rc7
mm/thp: Split huge pmds/puds if they're pinned when fork()
mm: Do early cow for pinned pages during fork() for ptes
mm/fork: Pass new vma pointer into copy_page_range()
mm: Introduce mm_struct.has_pinned
mm: validate pmd after splitting
mm: don't rely on system state to detect hot-plug operations
mm: replace memmap_context by meminit_context
arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback
lib/memregion.c: include memregion.h
lib/string.c: implement stpcpy
mm/migrate: correct thp migration stats
mm/gup: fix gup_fast with dynamic page table folding
mm: memcontrol: fix missing suffix of workingset_restore
mm, THP, swap: fix allocating cluster for swapfile by mistake
mm: slab: fix potential double free in ___cache_free
Documentation/llvm: Fix clang target examples
io_uring: ensure async buffered read-retry is setup properly
KVM: SVM: Add a dedicated INVD intercept routine
io_uring: don't unconditionally set plug->nowait = true
...
|
|
Vinod writes:
phy for 5.9
- Core:
- New PHY attribute for max_link_rate
- New phy drivers:
- Rockchip dphy driver moved from staging
- Socionext UniPhier AHCI PHY driver
- Intel LGM SoC USB phy
- Intel Keem Bay eMMC PHY driver
- Updates:
- Support for imx8mp usb phy
- Support for DP Phy and USB3+DP combo phy in QMP driver
- Support for Qualcomm sc7180 DP phy
- Support for cadence torrent PCIe and USB single linke and multilink
configurations along with USB, SGMII/QSGMII configurations
* tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
phy: qcom-qmp: initialize the pointer to NULL
phy: qcom-qmp: Add support for sc7180 DP phy
phy: qcom-qmp: Add support for DP in USB3+DP combo phy
phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify
phy: qcom-qmp: Get dp_com I/O resource by index
phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy'
phy: qcom-qmp: Remove 'initialized' in favor of 'init_count'
phy: qcom-qmp: Move phy mode into struct qmp_phy
dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information
dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy
dt-bindings: phy: cdns,torrent-phy: add reset-names
phy: rockchip-dphy-rx0: Include linux/delay.h
phy: fix USB_LGM_PHY warning & build errors
phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration
phy: cadence-torrent: Add PCIe + USB multilink configuration
phy: cadence-torrent: Add single link USB register sequences
phy: cadence-torrent: Add single link SGMII/QSGMII register sequences
phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals
phy: cadence-torrent: Add PHY link configuration sequences for single link
phy: cadence-torrent: Add clk changes for multilink configuration
...
|
|
A temporary var needed for building with ISP2400 was removed
by accident on a cleanup patch.
Fix the breakage.
Fixes: 852a53a02cf0 ("media: atomisp: get rid of unused vars")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use this small script to replace CamelCase and wrong case
on vars:
<script>
FILES=$(find "$1" -type f|grep -e '.c$' -e '.h$')
CAMEL_VARS=$(cat tags|perl -ne 'print "$1\n" if (m/^(\w*[A-Z]\w*[a-z]\w*)\s/)')
for i in $CAMEL_VARS; do
new=$(perl -e '
my $s = $ARGV[0];
$s =~ s{([^a-zA-Z]?)([A-Z]*)([A-Z])([a-z]?)}{
my $fc = pos($s)==0;
my ($p0,$p1,$p2,$p3) = ($1,lc$2,lc$3,$4);
my $t = $p0 || $fc ? $p0 : '_';
$t .= $p3 ? $p1 ? "${p1}_$p2$p3" : "$p2$p3" : "$p1$p2";
$t;
}ge;
print $s;' "$i")
for j in $FILES; do
sed -E "s,\b$i\b,$new,g" -i $j
done
done
for i in $(git grep "#define zr" drivers/staging/media/zoran/*.[ch]|perl -ne 'print "$1\n" if (m/#define\s+(zr\S+)/)'); do j=$(echo $i|tr [a-z] [A-Z]); sed "s,\b$i\b,$j,g" -i drivers/staging/media/zoran/*.[ch]; done
</script>
This should solve almost all warnings reported by checkpatch.pl
in strict mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The jpeg_error in lowercase is not used anywhere. Drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Don't mix case there: let's just use uppercase, as this is
the common pattern for such define-like enums.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Replace spaces with tab to clear checkpatch error.
ERROR: code indent should use tabs where possible
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20200929062847.23985-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Arnd Bergmann
Eric Biggers
Linus Torvalds
Anant Thazhemadam
Jérôme Pouiller
Ioana Ciornei
Fan Fei
Niklas Söderlund
Dan Carpenter
Coiby Xu
Ivan Safonov
Ross Schmidt
Mauro Carvalho Chehab
Greg Kroah-Hartman
Michael Straube