| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove unnecessary variable, summarize declaration and assignment.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary variable, summarize declaration and assignment.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary variable, summarize declaration and assignment.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unnecessary variable, summarize declaration and assignment.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
At the moment, usbctrl_vendorreq's requesttype parameter must be set to 1
for reading and 0 for writing. It's then converted to the actual
bmRequestType for the USB control request. We can simplify the code and
avoid this conversion if the caller passes the actual bmRequestType.
We already have defines for the read and write request types. Move them to
usb_ops_linux.c, they're used only inside this file. Replace the numeric
values with USB constants to make their meaning clearer.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The index for rtl8188eu's vendor-specific control requests is not used.
Remove the index parameter from usbctrl_vendorreq and pass index 0 to
usb_control_msg.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bRequest value for the vendor specific control requests sent by this
driver is always 0x05. Replace the function parameter with a define. Use
the same define as the rtlwifi driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct hal_data_8188e contains some components related to efuses which
are not used for rtl8188eu.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210406204829.18130-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When comparing a constant with variable, it is recommeneded
to have the constant on the right side of the test.
This patch silences the following checkpatch.pl warning:
"Comparisons should place the constant on the right side of the test"
Signed-off-by: Vardhan H G <crazylonestar7@gmail.com>
Link: https://lore.kernel.org/r/20210407061749.13460-1-crazylonestar7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following gcc warning:
drivers/staging/rtl8192u/r8192U_core.c:3419:6: warning: variable
‘reset_status’ set but not used [-Wunused-but-set-variable].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1617775650-42645-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following gcc warning:
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c:693:15: warning: variable
‘tmpRegC’ set but not used [-Wunused-but-set-variable].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1617767558-114050-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some constants defined in wifi.h are already defined in <linux/ieee80211.h>
with some other (but similar) names.
Be consistent and use the ones from <linux/ieee80211.h>.
The conversions made are:
_SSID_IE_ --> WLAN_EID_SSID
_SUPPORTEDRATES_IE_ --> WLAN_EID_SUPP_RATES
_DSSET_IE_ --> WLAN_EID_DS_PARAMS
_IBSS_PARA_IE_ --> WLAN_EID_IBSS_PARAMS
_ERPINFO_IE_ --> WLAN_EID_ERP_INFO
_EXT_SUPPORTEDRATES_IE_ --> WLAN_EID_EXT_SUPP_RATES
_HT_CAPABILITY_IE_ --> WLAN_EID_HT_CAPABILITY
_HT_EXTRA_INFO_IE_ --> WLAN_EID_HT_OPERATION (not used)
_HT_ADD_INFO_IE_ --> WLAN_EID_HT_OPERATION
_VENDOR_SPECIFIC_IE_ --> WLAN_EID_VENDOR_SPECIFIC
_RESERVED47_ --> (not used)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fe35fb45323adc3a30f31b7280cec7700fd325d8.1617741313.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move constant variables to the right side of comparisons to increase
consistency with Linux kernel code base.
Reported by checkpatch.
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Link: https://lore.kernel.org/r/20210406161131.GA103324@zhans
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added spaces around operators in file HalBtc8723b1Ant.h. Issue detected
by checkpatch.pl. Spaces are preferred to improve readibility.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210406164001.13646-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added spaces around operators in file HalBtc8723b2Ant.c. Issue detected
by checkpatch.pl. Spaces are preferred to improve readibility.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210406170011.20753-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added spaces around operators. Issue detected by checkpatch.pl.
Spaces around operators are preferred to improve readibility.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210406181428.15097-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Cleans up warnings of "line over 100 characters" but avoiding
more than 90 characters in file rtw_ap.c
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Link: https://lore.kernel.org/r/20210406155815.90271-1-martinsdecarvalhobeatriz@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added spaces around operators in file HalBtc8723b1Ant.c. Issue detected
by checkpatch.pl. Spaces are preferred to improve readibility.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210406154635.23191-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Jonathan writes:
2nd set of IIO features, cleanups etc for 5.13
Trying again as a wrong fixes tag managed to beat the checking script
I was running.
A few of these are fixes for major rework earlier in cycle.
Bulk of patches are the ad7150 pre graduation cleanup, some link
fixes in maintainers and set using the new IRQF_NO_AUTOEN flag.
Note includes a merge of a tag from tip to get the IRQF_NO_AUTOEN
support (one patch only from Barry Song)
Staging graduation
* adi,ad7150 CDC
- A lot of precursor patches cleaning it up first.
- Includes core support for timeout event ABI where after a time
a adaptive threshold jumps to fix slow tracking problems.
Cleanups and minor / late breaking fixes
* core
- Use sysfs_emit() and sysfs_emit_at() as appropriate
- Fix a bug introduced in this cycle for iio_read_channel_processed_scale()
- Fix handling of getfd ioctl as IIO_IOCTL_UNHANDLED is a valid ioctl number
- Tidy up some pointless type conversion in string formatting and odd
indentation.
* dac
- Use sysfs_emit() for powerdown attribute show() functions.
* docs
- Fix dead links due to txt to yaml binding conversions.
* treewide
- Use IRQF_NO_AUTOEN
* various
- Typo fixes in comments.
* triggers/hr-timer-trigger
- Fix an overflow handing issue.
* ad,ad7923
- Device managed functions in probe()
* ad,ad9467
- Fix kconfig dependency issue
* adi,adis16201
- Fix a wrong axis assignment that stops the driver loading.
* invensense,mpu6050
- Allow use as a standalone trigger (no channels enabled)
- Drop unnecessary manual assignment of indio_dev->modes
- Make device function in a basic way if no interrupt wired.
- Sanity check scale writes.
* semtech,sx9310
- Fix access to a variable length array in DT binding.
- Sanity check input before writing debounce register.
* st,stm32-dfsdm
- Drop __func__ from dev_dbg() and pr_debug().
* yamaha,yas530
- Include asm/unaligned.h instead of be_byteshift.h
- Fix an issue with return value on an error path.
* tag 'iio-for-5.13b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (76 commits)
iio: inv_mpu6050: Fully validate gyro and accel scale writes
iio: sx9310: Fix write_.._debounce()
iio: sx9310: Fix access to variable DT array
iio: adc: Kconfig: make AD9467 depend on ADI_AXI_ADC symbol
iio: magnetometer: yas530: Include right header
iio: magnetometer: yas530: Fix return value on error path
iio:cdc:ad7150: Fix use of uninitialized ret
iio: hrtimer-trigger: Fix potential integer overflow in iio_hrtimer_store_sampling_frequency
iio:adc: Fix trivial typo
iio:adc:ad7476: Fix remove handling
iio:adc:ad_sigma_delta: Use IRQF_NO_AUTOEN rather than request and disable
iio:imu:adis: Use IRQF_NO_AUTOEN instead of irq request then disable
iio:chemical:scd30: Use IRQF_NO_AUTOEN to avoid irq request then disable
iio:adc:sun4i-gpadc: Use new IRQF_NO_AUTOEN flag instead of request then disable
iio:adc:nau7802: Use IRQF_NO_AUTOEN instead of request then disable
iio:adc:exynos-adc: Use new IRQF_NO_AUTOEN flag rather than separate irq_disable()
iio:adc:ad7766: Use new IRQF_NO_AUTOEN to reduce boilerplate
iio: buffer: use sysfs_attr_init() on allocated attrs
iio: trigger: Fix strange (ladder-type) indentation
iio: trigger: Replace explicit casting and wrong specifier with proper one
...
|
|
This capacitance to digital converter (CDC) driver is compliant with
the IIO ABI. Note, not all features supported (e.g. window event modes)
but the driver should be in a useful functional state.
The cleanup was done against QEMU emulation of the device rather than
actual hardware. Whilst this was a bit of an experiment, it made it
easy to confirm that the driver remained in a consistent working state
through the various refactors. If it worked in the first place, it
should still be working after this cleanup.
Given some IIO drivers require expensive hardware setups, (not particularly
true with this one) the use of QEMU may provide a viable way forward
for providing testing during code changes where previously we'd had
to rely on sharp eyes and crossed fingers.
Note, no explicit MAINTAINERS entry as it will be covered by the
generic catch-alls for ADI and IIO drivers which are sufficient.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-25-jic23@kernel.org
|
|
It seems to me that the changes made to get this ready to move out of
staging are substantial enough to warant a copyright notice addition.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-23-jic23@kernel.org
|
|
Rather than using the fallback path in the i2c subsystem and hoping
for no clashes across vendors, lets put in an explicit table for
matching.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon>
Link: https://lore.kernel.org/r/20210314181511.531414-21-jic23@kernel.org
|
|
Given DT docs will include regulators, lets just turn them on and
off with driver probe() and remove().
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-20-jic23@kernel.org
|
|
The datasheet provides these two values on the assumption they are applied
to unshift raw value. Hence shift both the offset and scale by 4
to compensate.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-19-jic23@kernel.org
|
|
Every other register related to raw value on the datasheet is
described as correpsonding to the 12MSB of the actual
data registers + the bottom 4 bits are 0. So lets treat this
as what it actually is, which is a 12 bit value.
Note that we will have to be a little careful to compensate for
the offset and scale values.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-18-jic23@kernel.org
|
|
These have a habit of not getting updated with driver reorganizations
and don't add much info so drop them.
Also fix a minor comment syntax issue.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-17-jic23@kernel.org
|
|
Where there is no other basis on which to order declarations
let us prefer reverse xmas tree. Also reduce scope where
sensible.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-16-jic23@kernel.org
|
|
Whilst not important, it's nice to have the general headers in
alphabetical order.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-15-jic23@kernel.org
|
|
Add _REG postfix to register addresses to avoid confusion with
fields. Also add additional field defines and use throughout the
driver in place of magic numbers.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-14-jic23@kernel.org
|
|
Note this doesn't support everything the chip can do as we ignore
window mode for now (in window / out of window).
* Given the chip doesn't have any way of disabling the threshold
pins, use disable_irq() etc to mask them except when we actually
want them enabled (previously events were always enabled).
Note there are race conditions, but using the current state from
the status register and disabling interrupts across changes in
type of event should mean those races result in interrupts,
but no events to userspace.
* Correctly reflect that there is one threshold line per channel.
* Only take notice of rising edge. If anyone wants the other edge
then they should set the other threshold (they are available for
rising and falling directions). This isn't perfect but it makes
it a lot simpler.
* If insufficient interrupts are specified in firnware, don't support
events.
* Adaptive events use the same pos/neg values of thrMD as non adaptive
ones.
Tested against qemu based emulation.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20210314181511.531414-13-jic23@kernel.org
|
|
Now we have core support for timeouts related to adaptive events, let us
use it. Note the units of that attribute are seconds, so we also need
to scale the cycles value by the period of each sample.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-12-jic23@kernel.org
|
|
Device uses a fixed sampling frequency. Let us expose it to userspace.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-10-jic23@kernel.org
|
|
Also
* drop i2c_set_client_data() as now unused.
* white space cleanups
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-9-jic23@kernel.org
|
|
The event line is active high and not maskable within the device.
It indicates current state directly.
The device supports separate rising and falling thresholds so rather
than trying to using each bound to detect in both directions just use
IRQF_TRIGGER_RISING. If a user wants to detect the value falling
back below the threshold, then set the falling threshold appropriately.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-8-jic23@kernel.org
|
|
The driver supports devices with different numbers of channels and
also can function without provision of an IRQ (with reduced features),
so this patch handles this cleanly by having multiple chan_spec
arrays and iio_info structures to pick between depending on what we
have.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-7-jic23@kernel.org
|
|
There are no mainline board files using this driver so lets drop
the platform_data support in favour of devicetree and similar.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-6-jic23@kernel.org
|
|
The timeout is treated as one single value, but the datasheet describes
it as two 4 bit values, one for each direction of event.
As such change the driver to support the separate directions.
Also add limit checking to ensure it fits within the 4 bits.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-5-jic23@kernel.org
|
|
Original code was ordered in a fairly unituitive fashion with
the non adaptive threshold handling returning from the switch
statement, whilst the adapative path did the actual writes outside
the switch. Make it more readable by bringing everything within
the switch statement cases and reducing scope of local variables
as appropriate.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-4-jic23@kernel.org
|
|
The devices support window detection, but that corresponds to
being outside of a range defined by a lower an uppper bound rather
than being related to magnitude as such. Hence drop this interface
in the interests of making the driver ABI compliant.
We may bring back support for the window mode at somepoint in the future
but it will be in an ABI compliant fashion.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210314181511.531414-3-jic23@kernel.org
|
|
Reduces boilerplate and chances of getting the error handling wrong.
No functional change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon>
Link: https://lore.kernel.org/r/20210314181511.531414-2-jic23@kernel.org
|
|
According to the v4l2 api, it is allowed to skip
setting a control if its contents haven't changed for performance
reasons: userspace should only update the controls that changed from
last frame rather then updating them all. Still some ancient code
that checks for mandatory controls has been left in this driver.
Remove it.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This part is rather trivial so adding more comments isn't really helpful.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Acquire the graph_mutex for traversing the media graph. This seems to have
been missing all the time.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
If there in an error during a set_fmt, do not overwrite the previous
sizes with the invalid config.
Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and
causing the following OOPs
[ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes)
[ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0
[ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP
Cc: stable@vger.kernel.org
Fixes: 6d5f26f2e045 ("media: staging/intel-ipu3-v4l: reduce kernel stack usage")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
All Linux headers licensed under the GPL-2.0 must include a "WITH
Linux-syscall-note" extension in their SPDX license identifier, as
enforced by the scripts/headers_install.sh script. Fix the Intel IPU3
UAPI header currently stored with the driver in staging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Remove extra blank lines after an open brace to adhere to Linux kernel
coding style.
Reported by checkpatch.
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Link: https://lore.kernel.org/r/f61f6d330bc3fa53d4d420754d1d461b6cfcb2de.1617708653.git.zhansayabagdaulet@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace NULL comparisons with boolean negation to be more consistent with
the rest of the Linux kernel code base.
Reported by checkpatch.
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Link: https://lore.kernel.org/r/74471865b399584d73a18696d2008006301dfd71.1617708653.git.zhansayabagdaulet@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clean up checks of "Alignment should match open parenthesis"
in file mlme_osdep.h
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Link: https://lore.kernel.org/r/20210406105124.78498-1-martinsdecarvalhobeatriz@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove extra spaces after a cast to conform with Linux kernel coding
style.
Reported by checkpatch.
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Link: https://lore.kernel.org/r/f8932bfa35eb7480b69a9c8296bb10fac5a28540.1617697237.git.zhansayabagdaulet@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove extra blank lines to conform with Linux kernel coding style.
Reported by checkpatch.
Signed-off-by: Zhansaya Bagdauletkyzy <zhansayabagdaulet@gmail.com>
Link: https://lore.kernel.org/r/0bf3df788ca46a59ebb990bf2e3effca7080fd1e.1617697237.git.zhansayabagdaulet@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Martin Kaiser
Vardhan H G
Jiapeng Chong
Christophe JAILLET
Zhansaya Bagdauletkyzy
Fabio M. De Francesco
Beatriz Martins de Carvalho
Greg Kroah-Hartman
Jonathan Cameron
Daniel Almeida
Sakari Ailus
Ricardo Ribalda
Laurent Pinchart