| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace the bit left shift operation with the BIT_ULL() macro and remove
the unnecessary mask off operation against the bit_nr variable.
This mask is only there for legacy reasons. Originally it was 31 (0x1f)
and the bit_nr variable spread across an mc_filter array with two u32
elements. Now, this mask is not needed because its value is 0x3f and the
mc_filter variable is an u64 type.
In this situation, the 26 bit right shift operation against the value
returned by the ether_crc function set the bit_nr variable to the
following value:
bit 31 to bit 6 -> All 0 (due to the bit shift operation happens over an
unsigned type).
bit 5 to bit 0 -> The 6 msb bits of the value returned by the ether_crc
function.
The purpose of the 0x3f mask against the bit_nr variable is to reset
(set to 0) the 26 msb bits (bit 31 to bit 6), but these bits are yet 0.
So, the mask off operation is now unnecessary.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200314161441.4870-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Minor overlapping changes, nothing serious.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
10-bit and 12-bit greyscale input data to the CSI can be written as
8-bit data to memory. Support this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Support capturing the 10- and 12-bit greyscale formats.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
10-bit and 12-bit greyscale input data to the CSI can be written as
8-bit data to memory. Support this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The driver doesn't really support V4L2_PIX_FMT_Y16, as there's no 16-bit
greyscale media bus code defined by the kernel. It (ab)uses the format
to capture 10-bit and 12-bit greyscale formats. Fix it to properly
support MEDIA_BUS_FMT_Y10_1X10 and MEDIA_BUS_FMT_Y12_1X12 instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Commit 4791bd7d6adc ("media: imx: Try colorimetry at both sink and
source pads") reworked the way that formats are set on the sink pad of
the CSI subdevice, and accidentally removed video field handling.
Restore it by defaulting to V4L2_FIELD_NONE if the field value isn't
supported, with the only two supported value being V4L2_FIELD_NONE and
V4L2_FIELD_INTERLACED.
Fixes: 4791bd7d6adc ("media: imx: Try colorimetry at both sink and source pads")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The imx7_csi_dma_reflash() function starts by reading the unrelated
register CSI_CSICR18 to then overwrite the read value with a read from
register CSI_CSICR3. This is likely due to a bad copy&paste, and is not
needed. Remove the extraneous read from register CSI_CSICR18.
Fixes: 9e5fa4e1e5b5b ("media: imx7-media-csi: Use u32 for storing register reads")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enable filtering based on CSI-2 data type. Otherwise sources that send
multiple data types (such as sensors that send embedded data) will not
be properly supported. They will both result in additional non-image
lines being captured, and in the receiver being confused as it doesn't
resynchronise on vsync.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for the 8-, 10- and 12-bit greyscale media bus formats, and
map them to the CSI-2 RAW8, RAW10 and RAW12 formats respectively.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the RESOL_CH0 register to the list of registers printed through the
debugfs debug infrastructure for the driver, as it can be useful to
verify proper configuration of the CSI-2 receiver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The .s_stream() implementation incorrectly powers on the source when
stopping the stream. Power it off instead.
Fixes: 7807063b862b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently, imgu is working on 450MHz for all cases, however
in some cases (input frame less than 2048x1152), the imgu
did not need work in high frequency.
This patch make imgu work on 200MHz if the imgu input
frame is less than 2048x1152 to save power.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Fixes for simple typos in C comments.
Found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/20200312091042.GA4246@tulip.local
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200311131742.31068-1-shreeya.patel23498@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-4-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-3-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-2-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311091944.23185-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merged the DT binding documentation of SDIO and SPI into a single file.
Removed documentation for some of the properties which are not required
and handled review comments received in [1] & [2].
[1]. https://lore.kernel.org/linux-wireless/20200303020230.GA15543@bogus
[2]. https://lore.kernel.org/linux-wireless/20200303015558.GA6876@bogus
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-4-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Modified the 'clock-names' property by removing '_clk' from its name and
remove '_spi/sdio' from 'compatible' string.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-3-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make use of 'interrupts' property instead of using gpio for handling
the interrupt as suggested in [1].
[1]. https://lore.kernel.org/linux-wireless/20200303015558.GA6876@bogus
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-2-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Access to result of ieee80211_bss_get_ie() is protected by RCU. In other
hand, function hif_join() can sleep and cannot be called with RCU
locked.
Provide a copy of "ssidie" to hif_join() to solve this behavior.
Fixes: 9ced9b593741 ("staging: wfx: simplify hif_join()")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200310101356.182818-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Access to sta->ht_cap is protected by RCU. However,
hif_set_association_mode() may sleep, so it can't be called in RCU.
This patch fix this behavior by handling sta and its RCU directly from
function hif_set_association_mode().
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Fixes: d00149011066 ("staging: wfx: fix RCU usage")
Link: https://lore.kernel.org/r/20200310101356.182818-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removing station while some traffic is in progress may happen.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200310101356.182818-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Obviously introduced by mistake.
Fixes: 09779276f1ba ("staging: wfx: simplify hif_start() usage")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200310101356.182818-3-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After hif_shutdown(), communication with the chip is no more possible.
It the only request that never reply. Therefore, hif_cmd.lock is never
unlocked. hif_shutdown() unlock itself hif_cmd.lock to avoid a potential
warning during disposal of device. hif_cmd.key_renew_lock should also
been unlocked for the same reason.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200310101356.182818-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
get_char was erroneously given the address of the pointer to the text
instead of the address of the text, thus leading to random crashes when
the user requests speaking a word while the current position is on a space
character and say_word_ctl is not enabled.
Reported-on: https://github.com/bytefire/speakup/issues/1
Reported-by: Kirk Reiser <kirk@reisers.ca>
Reported-by: Janina Sajka <janina@rednote.net>
Reported-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com>
Reported-by: Gregory Nowak <greg@gregn.net>
Reported-by: deedra waters <deedra@the-brannons.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com>
Tested-by: Gregory Nowak <greg@gregn.net>
Tested-by: Michael Taboada <michael@michaels.world>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@function
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed WARNING: Missing a blank line after declarations in qlge_mpi.c to
the following lines:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:94:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:240:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:258:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:356:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:915:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:1099:
Signed-off-by: Carlos Henrique Lima Melara <charlesmelara@outlook.com>
Link: https://lore.kernel.org/r/CP2PR80MB434086A44A1ED5BB662B9D70A8FC0@CP2PR80MB4340.lamprd80.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix checkpatch check: 'informations' may be misspelled - perhaps
'information'? in rtw_mlme_ext.c:1151.
Signed-off-by: Andre Pinto <andrealmeidap1996@gmail.com>
Link: https://lore.kernel.org/r/20200311012638.18889-1-andrealmeidap1996@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve line grouping for better understanding the course of action and where
every comment belongs to.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/3fada7fe76047ecf06d0345c0ab9216424a126f2.1583848946.git.lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Every time priv->op_mode is not NL80211_IFTYPE_ADHOC it sets ATIM Window, but
this feature it is marked TODO in 2014 and did go untouched since 2015.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/d9b8e434e09cb8885026a71441bf3a6919dba3da.1583848946.git.lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The clock related code concerns me from the very beginning because
there are some set ups got from legacy driver that are not documented
anywhere. According to the programming guide 0x7c is 'CPE_ROSC_SEL1'
register and 0x80 is 'CPU_CPE_CN'. I do think this set up is not needed
at all and the proper thing to do is just enable the clock bit for each
pcie port. Hence remove useless code and do the right thing which is
setting up the clock bit for each port enabled.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200310113459.30539-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are two #if 0 blocks that have no recent history of any change.
Remove those code blocks for improved readability of the code.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200310212545.GA8914@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct hif_cnf_reset is not used anywhere in wfx. It's parent file
hif_api_cmd.h is imported form some other driver, hence some functions
in it are not used. This is one of them. Hence remove it.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-7-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
int ret is uneccessarily declared and 0 assigned to it. Return o
directly instead.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-6-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove extra space after a cast in file data_tx.h
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-5-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove extra spaces after casts in file data_tx.c
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-4-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
policies[i].uploaded is a bool. 1 is assigned to it. Change it to bool.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-3-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove an unesseccary space after a cast in file data_rx.c
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-2-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that there is a "real" solution for exfat in the vfs tree queued up
to be merged in 5.7-rc1 the "old" exfat code in staging can be removed.
Many thanks to Valdis for doing the work to get this into the tree in
the first place, it was greatly appreciated.
Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Pali Rohár <pali@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Sungjong Seo <sj1557.seo@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200310105421.GA2810679@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function 'mt7621_pcie_init_virtual_bridges' is a bit mess and can be
refactorized properly in a cleaner way. Introduce new 'pcie_rmw' inline
function helper to do clear and set the correct bits this function needs
to work.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200308091928.17177-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When softsynthu device fails the register, "/dev/softsynthu" should be
printed instead of "/dev/softsynth".
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Link: https://lore.kernel.org/r/20200305072151.403-1-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable merely toggles true to false and is unused.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/130a4078-2502-a381-46c4-b473815e153b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mac80211 is the only user of in_use to start it and should
not be true when so.
So internal toggling of this variable is not relevant.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/69585034-4318-4bec-7d9b-f64a167df237@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a recent change to the SPI subsystem in commit <bebcfd272df6>
("spi: introduce `delay` field for `spi_transfer` +
spi_transfer_delay_exec()"), a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Link: https://lore.kernel.org/r/20200304074319.22107-1-sergiu.cuciurean@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a recent change to the SPI subsystem in commit <bebcfd272df6>
("spi: introduce `delay` field for `spi_transfer` +
spi_transfer_delay_exec()"), a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Link: https://lore.kernel.org/r/20200304073746.19664-1-sergiu.cuciurean@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add space around & operator for improving the code
readability.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200308192152.26403-1-shreeya.patel23498@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused code.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Link: https://lore.kernel.org/r/20200308225400.17267-1-lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Align code to match open parenthesis.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309165138.5313-1-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Oscar Carter
David S. Miller
Laurent Pinchart
Bingbu Cao
R Veera Kumar
Shreeya Patel
Takashi Iwai
Ajay Singh
Jérôme Pouiller
Samuel Thibault
Carlos Henrique Lima Melara
Andre Pinto
Lourdes Pedrajas
Sergio Paracuellos
Deepak R Varma
Kaaira Gupta
Greg Kroah-Hartman
Zhenzhong Duan
Malcolm Priestley
Sergiu Cuciurean
Payal Kshirsagar