aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/target/target_core_alua.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-11-24scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16Hannes Reinecke1-1/+1
SPC-3 defines SERVICE ACTION IN(12) and SERVICE ACTION IN(16). So rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to be consistent with SPC and to allow for better distinction. Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-01target: encapsulate smp_mb__after_atomic()Joern Engel1-23/+10
The target code has a rather generous helping of smp_mb__after_atomic() throughout the code base. Most atomic operations were followed by one and none were preceded by smp_mb__before_atomic(), nor accompanied by a comment explaining the need for a barrier. Instead of trying to prove for every case whether or not it is needed, this patch introduces atomic_inc_mb() and atomic_dec_mb(), which explicitly include the memory barriers before and after the atomic operation. For now they are defined in a target header, although they could be of general use. Most of the existing atomic/mb combinations were replaced by the new helpers. In a few cases the atomic was sandwiched in spin_lock/spin_unlock and I simply removed the barrier. I suspect that in most cases the correct conversion would have been to drop the barrier. I also suspect that a few cases exist where a) the barrier was necessary and b) a second barrier before the atomic would have been necessary and got added by this patch. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-08Merge branch 'next' (accumulated 3.16 merge window patches) into masterLinus Torvalds1-13/+13
Now that 3.15 is released, this merges the 'next' branch into 'master', bringing us to the normal situation where my 'master' branch is the merge window. * accumulated work in next: (6809 commits) ufs: sb mutex merge + mutex_destroy powerpc: update comments for generic idle conversion cris: update comments for generic idle conversion idle: remove cpu_idle() forward declarations nbd: zero from and len fields in NBD_CMD_DISCONNECT. mm: convert some level-less printks to pr_* MAINTAINERS: adi-buildroot-devel is moderated MAINTAINERS: add linux-api for review of API/ABI changes mm/kmemleak-test.c: use pr_fmt for logging fs/dlm/debug_fs.c: replace seq_printf by seq_puts fs/dlm/lockspace.c: convert simple_str to kstr fs/dlm/config.c: convert simple_str to kstr mm: mark remap_file_pages() syscall as deprecated mm: memcontrol: remove unnecessary memcg argument from soft limit functions mm: memcontrol: clean up memcg zoneinfo lookup mm/memblock.c: call kmemleak directly from memblock_(alloc|free) mm/mempool.c: update the kmemleak stack trace for mempool allocations lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations mm: introduce kmemleak_update_trace() mm/kmemleak.c: use %u to print ->checksum ...
2014-06-06target: Allow READ_CAPACITY opcode in ALUA Standby access stateNicholas Bellinger1-0/+9
This patch allows READ_CAPACITY + SAI_READ_CAPACITY_16 opcode processing to occur while the associated ALUA group is in Standby access state. This is required to avoid host side LUN probe failures during the initial scan if an ALUA group has already implicitly changed into Standby access state. This addresses a bug reported by Chris + Philip using dm-multipath + ESX hosts configured with ALUA multipath. Reported-by: Chris Boot <crb@tiger-computing.co.uk> Reported-by: Philip Gaw <pgaw@darktech.org.uk> Cc: Chris Boot <crb@tiger-computing.co.uk> Cc: Philip Gaw <pgaw@darktech.org.uk> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra1-13/+13
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-13target: silence GCC warning in target_alua_state_checkPaul Bolle1-51/+44
Building target_core_alua.o triggers a GCC warning: drivers/target/target_core_alua.c: In function ‘target_alua_state_check’: drivers/target/target_core_alua.c:773:18: warning: ‘alua_ascq’ may be used uninitialized in this function [-Wmaybe-uninitialized] cmd->scsi_ascq = alua_ascq; ^ This is a false positive. A little trial and error shows it is apparently caused by core_alua_state_lba_dependent(). It must be hard for GCC to track the branches of a switch statement, inside a list_for_each_entry loop, inside a while loop. But if we add a small (inline) helper function we can reorganize the code a bit. That also allows to drop alua_ascq which, obviously, gets rid of this warning. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_divNicholas Bellinger1-1/+1
This patch changes core_alua_state_lba_dependent() to use do_div() instead sector_div() to avoid the following link error on 32-bit with CONFIG_LBDAF=n as reported by Jim: buildlog-1391099072.txt-drivers/built-in.o: In function `target_alua_state_check': buildlog-1391099072.txt-(.text+0x928d93): undefined reference to `__umoddi3' buildlog-1391099072.txt:make: *** [vmlinux] Error 1 -- buildlog-1391101753.txt- CC init/version.o buildlog-1391101753.txt- LD init/built-in.o buildlog-1391101753.txt-drivers/built-in.o: In function `core_alua_state_lba_dependent': buildlog-1391101753.txt-/home/jim/linux/drivers/target/target_core_alua.c:503: undefined reference to `__umoddi3' buildlog-1391101753.txt:make: *** [vmlinux] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target_core_alua: check for buffer overflowHannes Reinecke1-6/+17
When a writing to a command-provided buffer we need to ensure that we're not writing past the end of it. At the same time we need to continue processing as typically the final data length (ie the required size of the buffer) need to be returned. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target_core_alua: Referrals configfs integrationHannes Reinecke1-0/+101
Referrals need an LBA map, which needs to be kept consistent across all target port groups. So instead of tying the map to the target port groups I've implemented a single attribute containing the entire map. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-09target_core_alua: Referrals infrastructureHannes Reinecke1-0/+154
Add infrastructure for referrals. v2 changes: - Fix unsigned long long division in core_alua_state_lba_dependent on 32-bit (Fengguang + Chen + Hannes) - Fix compile warning in core_alua_state_lba_dependent (nab) - Convert segment_* + sectors variables in core_alua_state_lba_dependent to u64 (Hannes) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: Use workqueue for ALUA transitioningHannes Reinecke1-50/+124
Use a workqueue for processing ALUA state transitions; this allows us to process implicit delay properly. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: store old and pending ALUA stateHannes Reinecke1-5/+10
During state transition we should be storing both the original and the pending state. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: Allocate ALUA metadata on demandHannes Reinecke1-39/+31
We should only allocate ALUA metadata if we're actually going to write them. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-17target_core_alua: validate ALUA state transitionHannes Reinecke1-10/+45
As we now can modify the list of supported states we need to validate the requested ALUA state when doing a state transition. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target_core_alua: Store supported ALUA statesHannes Reinecke1-6/+8
The supported ALUA states might be different for individual devices, so store it in a separate field. (nab: Remove unnecessary line continuation) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZEDHannes Reinecke1-5/+5
Rename ALUA_ACCESS_STATE_OPTMIZED to ALUA_ACCESS_STATE_OPTIMIZED. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target_core_alua: spellcheckHannes Reinecke1-9/+9
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-20target core: rename (ex,im)plict -> (ex,im)plicitHannes Reinecke1-55/+55
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10target: Update copyright ownership/year information to 2013Nicholas Bellinger1-1/+1
Update copyright ownership/year information for target-core, loopback, iscsi-target, tcm_qla2xx, vhost and iser-target. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10target: Fix >= v3.9+ regression in PR APTPL + ALUA metadata write-outGera Kazakov1-1/+1
This patch fixes a >= v3.9+ regression in __core_scsi3_write_aptpl_to_file() + core_alua_write_tpg_metadata() write-out, where a return value of -EIO was incorrectly being returned upon success. This bug was originally introduced in: commit 0e9b10a90f1c30f25dd6f130130240745ab14010 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Sat Feb 23 15:22:43 2013 -0500 target: writev() on single-element vector is pointless However, given that the return of core_scsi3_update_and_write_aptpl() was not used to determine if a command should be returned with non GOOD status, this bug was not being triggered in PR logic until v3.11-rc1 by commit: commit 459f213ba162bd13e113d6f92a8fa6c780fd67ed Author: Andy Grover <agrover@redhat.com> Date: Thu May 16 10:41:02 2013 -0700 target: Allocate aptpl_buf inside update_and_write_aptpl() So, go ahead and only return -EIO if kernel_write() returned a negative value. Reported-by: Gera Kazakov <gkazakov@msn.com> Signed-off-by: Gera Kazakov <gkazakov@msn.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Grover <agrover@redhat.com> Cc: stable@vger.kernel.org # 3.9+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10target: Avoid non-existent tg_pt_gp_mem in target_alua_state_checkNicholas Bellinger1-0/+3
This patch adds an check for a non-existent port->sep_alua_tg_pt_gp_mem within target_alua_state_check(), which is not present for internally dispatched EXTENDED_COPY WRITE I/O to the destination target port. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-12target: replace strict_strto*() with kstrto*()Jingoo Han1-16/+16
The usage of strict_strtoul() and strict_strtoull() is not preferred, because strict_strtoul() and strict_strtoull() are obsolete. Thus, kstrtoul() and kstrtoull() should be used. v2: Fix incorrect return in ft_add_tpg (Fengguang) Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-04-11target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBsNicholas Bellinger1-0/+3
This patch fixes a bug where a handful of informational / control CDBs that should be allowed during ALUA access state Standby/Offline/Transition where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*. This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN registration when LUN scanning occured during these ALUA access states. Cc: Hannes Reinecke <hare@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-26target: writev() on single-element vector is pointlessAl Viro1-26/+9
... in other news: filp_open() can't return a struct file with NULL dentry filp_open() can't return a struct file negative dentry filp_close() of something that never had been in any descriptor tables is pointless - fput() is all you need Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-10target: Use TCM_NO_SENSE for initialisationHannes Reinecke1-1/+1
The compiler complained about uninitialized variables, so use TCM_NO_SENSE here. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-27target: Update copyright information to 2012Nicholas Bellinger1-2/+1
v2: Use correct target_core_stat.c 2006 copyright year v3: Drop extra unnessary legal verbage from header (hch) Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: Fix incorrect inversion of TPGS_EXPLICT_ALUA checkNicholas Bellinger1-1/+1
Fix a bug introduced with patch "target: pass sense_reason as a return value" in for-3.8 code where only target port groups with TPGS_EXPLICT_ALUA set need to be allowed to perform explictly ALUA. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: pass sense_reason as a return valueChristoph Hellwig1-53/+45
Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: simplify alua supportChristoph Hellwig1-88/+47
We always support ALUA for virtual backends, and never for physical ones. Simplify the code to just deal with these two cases and remove the superflous abstractions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: kill struct se_subsystem_devChristoph Hellwig1-80/+72
Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-17target: Fix minor spelling typos in drivers/targetMasanari Iida1-1/+1
Correct spelling typo in printk and comment within drivers/target. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-07target: report too-small parameter lists everywherePaolo Bonzini1-0/+7
Several places were not checking that the parameter list length was large enough, and thus accessing invalid memory. Zero-length parameter lists are just a special case of this. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-06-12target: Return error to initiator if SET TARGET PORT GROUPS emulation failsRoland Dreier1-2/+3
The error paths in target_emulate_set_target_port_groups() are all essentially "rc = -EINVAL; goto out;" but the code at "out:" ignores rc and always returns success. This means that even if eg explicit ALUA is turned off, the initiator will always see a good SCSI status for SET TARGET PORT GROUPS. Fix this by returning rc as is intended. It appears this bug was added by the following patch: commit 05d1c7c0d0db4cc25548d9aadebb416888a82327 Author: Andy Grover <agrover@redhat.com> Date: Wed Jul 20 19:13:28 2011 +0000 target: Make all control CDBs scatter-gather Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attributeNicholas Bellinger1-12/+70
This patch adds support for ALUA MI_REPORT_TARGET_PGS extended header format defined within SPC-4. It changes target core ALUA emulation logic within target_emulate_report_target_port_groups() to support both the extended and original length only header formats. It includes adding a new 'implict_trans_secs' attribute for each ALUA target port group to control the value returned to the application client for an recommended implict translation timeout in seconds. By default this value is currently set to zero, and limited up to 255 by virtue of using a single byte in the extended header format. This value is used by target_emulate_report_target_port_groups() within the extended header logic to set IMPLICIT TRANSITION TIME as defined by spc4r30. Cc: Hannes Reinecke <hare@suse.de> Cc: Rob Evers <revers@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bitsNicholas Bellinger1-3/+3
This patch fixes the MAINTENANCE_IN service action type checks to only look at the proper lower 5 bits of cdb byte 1. This addresses the case where MI_REPORT_TARGET_PGS w/ extended header using the upper three bits of cdb byte 1 was not processed correctly in transport_generic_cmd_sequencer, as well as the three cases for standby, unavailable, and transition ALUA primary access state checks. Also add MAINTENANCE_IN to the excluded list in transport_generic_prepare_cdb() to prevent the PARAMETER DATA FORMAT bits from being cleared. Cc: Hannes Reinecke <hare@suse.de> Cc: Rob Evers <revers@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: replace ->execute_task with ->execute_cmdChristoph Hellwig1-8/+4
Make CDB emulation work on commands instead of tasks again as a preparation of removing tasks completely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25target: Fix 16-bit target ports for SET TARGET PORT GROUPS emulationRoland Dreier1-4/+3
The old code did (MSB << 8) & 0xff, which always evaluates to 0. Just use get_unaligned_be16() so we don't have to worry about whether our open-coded version is correct or not. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18target: Allow control CDBs with data > 1 pageAndy Grover1-4/+4
We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: header reshuffle, part2Christoph Hellwig1-3/+2
This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14target: reshuffle headersChristoph Hellwig1-1/+1
Create a new headers, drivers/target/target_core_internal.h that is supposed to hold all target_core-internal prototypes. Move all non-exported includes from include/target to it, and merge the smaller prototype-only includes inside drivers/target into it as well. Mark functions that were found to not be called outside their implementation file static. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: remove unused struct fieldsJörn Engel1-2/+0
Some are never used, some are set but never read, dev_hoq_count is incremented and decremented, but never read. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06target: Address legacy PYX_TRANSPORT_* return code breakageNicholas Bellinger1-9/+16
This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-06Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds1-0/+1
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04target: remove SCF_EMULATE_CDB_ASYNCChristoph Hellwig1-1/+4
All ->execute_task instances now need to complete the I/O explicitly, which can either happen synchronously or asynchronously. Note that a lot of the CDB emulations appear to return success even if some lowlevel operations failed. Given that this is an existing issue this patch doesn't change that fact. (nab: Adding missing switch breaks in PR-IN + PR_OUT) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-04target: pass the se_task to the CDB emulation callbackChristoph Hellwig1-2/+4
We want to be able to handle all CDBs through it and remove hacks like always using the first task in a CDB in target_report_luns. Also rename the callback to ->execute_task to better describe its use. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-10-31drivers/target: Add export.h to files as required.Paul Gortmaker1-0/+1
So that they have access to EXPORT_SYMBOL variants and THIS_MODULE. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-24target: Fix REPORT TARGET PORT GROUPS handling with small allocation lengthNicholas Bellinger1-0/+20
This patch fixes a bug with the handling of REPORT TARGET PORT GROUPS containing a smaller allocation length than the payload requires causing memory writes beyond the end of the buffer. This patch checks for the minimum 4 byte length for the response payload length, and also checks upon each loop of T10_ALUA(su_dev)->tg_pt_gps_list to ensure the Target port group and Target port descriptor list is able to fit into the remaining allocation length. If the response payload exceeds the allocation length length, then rd_len is still increments to indicate to the initiator that the payload has been truncated. Reported-by: Roland Dreier <roland@purestorage.com> Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-10-11target: Remove unneeded version.h includesJesper Juhl1-1/+0
It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/target/. This patch removes them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Follow up core updates from AGrover and HCH (round 4)Andy Grover1-84/+84
This patch contains the squashed version of forth round series cleanups from Andy and Christoph following the post heavy lifting in the preceeding: 'Eliminate usage of struct se_mem' and 'Make all control CDBs scatter-gather' changes. This also includes a conversion of target core and the v3.0 mainline fabric modules (loopback and tcm_fc) to use pr_debug and the CONFIG_DYNAMIC_DEBUG infrastructure! These have been squashed into this third and final round for v3.1. target: Remove ifdeffed code in t_g_process_write target: Remove direct ramdisk code target: Rename task_sg_num to task_sg_nents target: Remove custom debug macros for pr_debug. Use pr_err(). target: Remove custom debug macros in mainline fabrics target: Set WSNZ=1 in block limits VPD. Abort if WRITE_SAME sectors = 0 target: Remove transport do_se_mem_map callback target: Further simplify transport_free_pages target: Redo task allocation return value handling target: Remove extra parentheses target: change alloc_task call to take *cdb, not *cmd (nab: Fix bogus struct file assignments in fd_do_readv and fd_do_writev) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22target: Make all control CDBs scatter-gatherAndy Grover1-11/+31
Previously, some control CDBs did not allocate memory in pages for their data buffer, but just did a kmalloc. This patch makes all cdbs allocate pages. This has the benefit of streamlining some paths that had to behave differently when we used two allocation methods. The downside is that all accesses to the data buffer need to kmap it before use, and need to handle data in page-sized chunks if more than a page is needed for a given command's data buffer. Finally, note that cdbs with no data buffers are handled a little differently. Before, SCSI_NON_DATA_CDBs would not call get_mem at all (they'd be in the final else in transport_allocate_resources) but now these will make it into generic_get_mem, but just not allocate any buffers. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.