aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/target (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-07scsi: target/core: Fix TAS handling for aborted commandsBart Van Assche4-87/+10
The TASK ABORTED STATUS (TAS) bit is defined as follows in SAM: "TASK_ABORTED: this status shall be returned if a command is aborted by a command or task management function on another I_T nexus and the control mode page TAS bit is set to one". TAS handling is spread over the target core and the iSCSI target driver. If a LUN RESET is received, the target core will send the TASK_ABORTED response for all commands for which such a response has to be sent. If an ABORT TASK is received, only the iSCSI target driver will send the TASK_ABORTED response for the commands for which that response has to be sent. That is a bug since all target drivers have to honor the TAS bit. Fix this by moving the code that handles TAS from the iSCSI target driver into the target core. Additionally, if a command has been aborted, instead of sending the TASK_ABORTED status from the context that processes the SCSI command send it from the context of the ABORT TMF. The core_tmr_abort_task() change in this patch causes the CMD_T_TAS flag to be set if a TASK_ABORTED status has to be sent back to the initiator that submitted the command. If that flag has been set transport_cmd_finish_abort() will send the TASK_ABORTED response. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07scsi: target/core: Simplify the code for aborting SCSI commandsBart Van Assche2-20/+4
Instead of allowing the code that aborts a SCSI command to finish before all iSCSI data frames have been received, make that code wait until all iSCSI data frames have been received. Introduce a new member variable in the target driver template to communicate that information from the iSCSI target driver to the target core. This change allows to leave out the check whether or not it is already safe to send the TASK_ABORTED reply from transport_send_task_abort(). Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07scsi: target/core: Make it possible to wait from more than one context for command completionBart Van Assche1-5/+9
This patch does not change any functionality but makes the patch that makes TMF handling synchronous easier to read. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07scsi: target/core: Use system workqueues for TMFBart Van Assche2-17/+1
A quote from SAM-5: "The order in which task management requests are processed is not specified by the SCSI architecture model. The SCSI architecture model does not require in-order delivery of such task management requests or processing by the task manager in the order received. To guarantee the processing order of task management requests referencing sent to a specific logical unit, an application client should not have more than one such task management request pending to that logical unit." This means that it is safe to use the system workqueues instead of tmr_wq for processing TMFs. An intended side effect of this patch is that it enables concurrent processing of TMFs. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enoughBart Van Assche2-11/+30
A session must only be released after all code that accesses the session structure has finished. Make sure that this is the case by introducing a new command counter per session that is only decremented after the .release_cmd() callback has finished. This patch fixes the following crash: BUG: KASAN: use-after-free in do_raw_spin_lock+0x1c/0x130 Read of size 4 at addr ffff8801534b16e4 by task rmdir/14805 CPU: 16 PID: 14805 Comm: rmdir Not tainted 4.18.0-rc2-dbg+ #5 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 do_raw_spin_lock+0x1c/0x130 _raw_spin_lock_irqsave+0x52/0x60 srpt_set_ch_state+0x27/0x70 [ib_srpt] srpt_disconnect_ch+0x1b/0xc0 [ib_srpt] srpt_close_session+0xa8/0x260 [ib_srpt] target_shutdown_sessions+0x170/0x180 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x200 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9c/0x110 [configfs] config_item_put+0x26/0x30 [configfs] configfs_rmdir+0x3b8/0x510 [configfs] vfs_rmdir+0xb3/0x1e0 do_rmdir+0x262/0x2c0 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07scsi: target/core: Simplify transport_clear_lun_ref()Bart Van Assche3-32/+5
Since transport_clear_lun_ref() already waits until the percpu-refcount .release() method is called, it is not necessary to wait first until percpu_ref_kill_and_confirm() has finished transitioning the refcount into atomic mode. Remove the code that waits for percpu_ref_kill_and_confirm() to complete and also the completion object that is used by that code. This patch does not change the behavior of the SCSI target code. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Disseldorp <ddiss@suse.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07scsi: target/core: Use kvcalloc() instead of open-coding itBart Van Assche1-7/+4
This patch does not change any functionality. Note: the code that frees sess_cmd_map already uses kvfree() so that code does not need to be modified. Reviewed-by: David Disseldorp <ddiss@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-12-07scsi: target/tcmu: Fix queue_cmd_ring() declarationBart Van Assche1-1/+1
This patch does not change any functionality but avoids that sparse complains about the queue_cmd_ring() function and its callers. Fixes: 6fd0ce79724d ("tcmu: prep queue_cmd_ring to be used by unmap wq") Reviewed-by: David Disseldorp <ddiss@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-30sbitmap: optimize wakeup checkJens Axboe1-5/+7
Even if we have no waiters on any of the sbitmap_queue wait states, we still have to loop every entry to check. We do this for every IO, so the cost adds up. Shift a bit of the cost to the slow path, when we actually have waiters. Wrap prepare_to_wait_exclusive() and finish_wait(), so we can maintain an internal count of how many are currently active. Then we can simply check this count in sbq_wake_ptr() and not have to loop if we don't have any sleepers. Convert the two users of sbitmap with waiting, blk-mq-tag and iSCSI. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-28scsi: target: replace fabric_ops.name with fabric_aliasDavid Disseldorp5-16/+19
iscsi_target_mod is the only LIO fabric where fabric_ops.name differs from the fabric_ops.fabric_name string. fabric_ops.name is used when matching target/$fabric ConfigFS create paths, so rename it .fabric_alias and fallback to target/$fabric vs .fabric_name comparison if .fabric_alias isn't initialised. iscsi_target_mod is the only fabric module to set .fabric_alias . All other fabric modules rely on .fabric_name matching and can drop the duplicate string. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: target: drop unnecessary get_fabric_name() accessor from fabric_opsDavid Disseldorp15-122/+97
All fabrics return a const string. In all cases *except* iSCSI the get_fabric_name() string matches fabric_ops.name. Both fabric_ops.get_fabric_name() and fabric_ops.name are user-facing, with the former being used for PR/ALUA state and the latter for ConfigFS (config/target/$name), so we unfortunately need to keep both strings around for now. Replace the useless .get_fabric_name() accessor function with a const string fabric_name member variable. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: target: drop unused pi_prot_format attribute storageDavid Disseldorp1-2/+1
On write, the pi_prot_format configfs attribute invokes the device format_prot() callback if present. Read dumps the contents of se_dev_attrib.pi_prot_format which is always zero. Make the configfs attribute write-only, and drop the always zero se_dev_attrib.pi_prot_format storage. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-23cxgb4: use new fw interface to get the VIN and smt indexSantosh Rastapur1-4/+4
If the fw supports returning VIN/VIVLD in FW_VI_CMD save it in port_info structure else retrieve these from viid and save them in port_info structure. Do the same for smt_idx from FW_VI_MAC_CMD Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21scsi: target: add emulate_pr backstore attr to toggle PR supportDavid Disseldorp4-6/+41
The new emulate_pr backstore attribute allows for Persistent Reservation and SCSI2 RESERVE/RELEASE support to be completely disabled. This can be useful for scenarios such as: - Ensuring ATS (Compare & Write) usage on recent VMware ESXi initiators. - Allowing clustered (e.g. tcm-user) backends to block such requests, avoiding the multi-node reservation state propagation. When explicitly disabled, PR and RESERVE/RELEASE requests receive Invalid Command Operation Code response sense data. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-18Merge tag 'v4.20-rc3' into for-4.21/blockJens Axboe1-2/+2
Merge in -rc3 to resolve a few conflicts, but also to get a few important fixes that have gone into mainline since the block 4.21 branch was forked off (most notably the SCSI queue issue, which is both a conflict AND needed fix). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07block: remove __blk_put_request()Jens Axboe1-1/+1
Now there's no difference between blk_put_request() and __blk_put_request() anymore, get rid of the underscore version and convert the few callers. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-05scsi: target/core: Avoid that a kernel oops is triggered when COMPARE AND WRITE failsBart Van Assche1-2/+2
Fixes: aa73237dcb2d ("scsi: target/core: Always call transport_complete_callback() upon failure") Reviewed-by: David Disseldorp <ddiss@suse.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-5/+5
Pull more SCSI updates from James Bottomley: "This is a set of minor small (and safe changes) that didn't make the initial pull request plus some bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mvsas: Remove set but not used variable 'id' scsi: qla2xxx: Remove two arguments from qlafx00_error_entry() scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res' scsi: qla2xxx: Remove a set-but-not-used variable scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze scsi: qla2xxx: Declare local functions 'static' scsi: qla2xxx: Improve several kernel-doc headers scsi: qla2xxx: Modify fall-through annotations scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb scsi: mvsas: Use dma_pool_zalloc scsi: target: Don't request modules that aren't even built scsi: target: Set response length for REPORT TARGET PORT GROUPS
2018-11-01Merge branch 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-7/+5
Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-10-25Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds15-95/+121
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380, qla2xxx, lpfc, libsas, hisi_sas. In addition there's a set of mostly small updates to the target subsystem a set of conversions to the generic DMA API, which do have some potential for issues in the older drivers but we'll handle those as case by case fixes. A new myrs driver for the DAC960/mylex raid controllers to replace the block based DAC960 which is also being removed by Jens in this merge window. Plus the usual slew of trivial changes" [ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even wonder. There's also a "myrb" driver, where the 'b' stands for 'block'. Truly, somebody has got mad naming skillz. - Linus ] * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits) scsi: myrs: Fix the processor absent message in processor_show() scsi: myrs: Fix a logical vs bitwise bug scsi: hisi_sas: Fix NULL pointer dereference scsi: myrs: fix build failure on 32 bit scsi: fnic: replace gross legacy tag hack with blk-mq hack scsi: mesh: switch to generic DMA API scsi: ips: switch to generic DMA API scsi: smartpqi: fully convert to the generic DMA API scsi: vmw_pscsi: switch to generic DMA API scsi: snic: switch to generic DMA API scsi: qla4xxx: fully convert to the generic DMA API scsi: qla2xxx: fully convert to the generic DMA API scsi: qla1280: switch to generic DMA API scsi: qedi: fully convert to the generic DMA API scsi: qedf: fully convert to the generic DMA API scsi: pm8001: switch to generic DMA API scsi: nsp32: switch to generic DMA API scsi: mvsas: fully convert to the generic DMA API scsi: mvumi: switch to generic DMA API scsi: mpt3sas: switch to generic DMA API ...
2018-10-23scsi: target: Don't request modules that aren't even builtRoland Dreier1-4/+4
If, for example, I don't enable CONFIG_TCM_PSCSI, then every time I load the target subsystem, I get an annoying Unable to load target_core_pscsi kernel log message. Instead let's only request_module() on things if that code is enabled. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-23scsi: target: Set response length for REPORT TARGET PORT GROUPSRoland Dreier1-1/+1
One more place where we can return the length we actually fill in. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-24iov_iter: Separate type from direction and use accessor functionsDavid Howells2-7/+5
In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-16scsi: target/core: Always call transport_complete_callback() upon failureBart Van Assche2-9/+8
COMPARE AND WRITE command execution starts with a call of sbc_compare_and_write(). That function locks the caw_sem member in the backend device data structure and submits a read request to the backend driver. Upon successful completion of the read compare_and_write_callback() gets called. That last function compares the data that has been read. If it matches transport_complete_callback is set to compare_and_write_post and a write request is submitted. compare_and_write_post() submits a write request to the backend driver. XDWRITEREAD command execution starts with sbc_execute_rw() submitting a read to the backend device. Upon successful completion of the read the xdreadwrite_callback() gets called. That function xors the data that has been read with the data in the data-out buffer and stores the result in the data-in buffer. Call transport_complete_callback() not only if COMPARE AND WRITE fails but also if XDWRITEREAD fails. This makes the code more systematic. Make sure that the callback functions handle (cmd, false, NULL) argument triples fine. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target/core: Use sg_alloc_table() instead of open-coding itBart Van Assche1-6/+5
The purpose of sg_alloc_table() is to allocate and initialize an sg-list. Use that function instead of open-coding it. This patch will make it easier to share code for caching sg-list allocations between the SCSI and NVMe target cores. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target/core: Use the SECTOR_SHIFT constantBart Van Assche2-3/+2
Instead of duplicating the SECTOR_SHIFT definition from <linux/blkdev.h>, use it. This patch does not change any functionality. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target/core: Remove the SCF_COMPARE_AND_WRITE_POST flagBart Van Assche1-6/+0
Commit 057085e522f8 ("target: Fix race for SCF_COMPARE_AND_WRITE_POST checking") removed the code that checks the SCF_COMPARE_AND_WRITE_POST flag. Hence also remove the flag itself. Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target/core: Remove an unused data member from struct xcopy_pt_cmdBart Van Assche1-3/+0
A value is assigned to the xcopy_op member of struct xcopy_pt_cmd but that value is never used. Hence remove the xcopy_op member. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target/core: Fix spelling in two source code commentsBart Van Assche1-2/+2
Change one occurrence of "aleady" into "already" and one occurrence of "is" into "if". Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target: stash sess_err_stats on Data-Out timeoutDavid Disseldorp1-0/+1
sess_err_stats are currently filled on NOP ping timeout, but not Data-Out timeout. Stash details of Data-Out timeouts using a ISCSI_SESS_ERR_CXN_TIMEOUT value for last_sess_failure_type. Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target: split out helper for cxn timeout error stashingDavid Disseldorp3-30/+22
Replace existing nested code blocks with helper function calls. Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target: log NOP ping timeouts as errorsDavid Disseldorp1-3/+5
Events resulting in connection outages like this should be logged as errors. Include the I_T Nexus in the message to aid path identification. Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target: log Data-Out timeouts as errorsDavid Disseldorp1-5/+11
Data-Out timeouts resulting in connection outages should be logged as errors. Include the I_T Nexus in the message to aid path identification. Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target: use ISCSI_IQN_LEN in iscsi_target_statDavid Disseldorp1-2/+2
Move the ISCSI_IQN_LEN definition up, so that it can be used in more places instead of a hardcoded value. Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16scsi: target: Fix target_wait_for_sess_cmds breakage with active signalsNicholas Bellinger1-2/+2
With the addition of commit 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") in v4.19-rc, it incorrectly assumes no signals will be pending for task_struct executing the normal session shutdown and I/O quiesce code-path. For example, iscsi-target and iser-target issue SIGINT to all kthreads as part of session shutdown. This has been the behaviour since day one. As-is when signals are pending with se_cmds active in se_sess->sess_cmd_list, wait_event_interruptible_lock_irq_timeout() returns a negative number and immediately kills the machine because of the do while (ret <= 0) loop that was added in commit 00d909a107 to spin while backend I/O is taking any amount of extended time (say 30 seconds) to complete. Here's what it looks like in action with debug plus delayed backend I/O completion: [ 4951.909951] se_sess: 000000003e7e08fa before target_wait_for_sess_cmds [ 4951.914600] target_wait_for_sess_cmds: signal_pending: 1 [ 4951.918015] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 0 [ 4951.921639] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 1 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 2 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 3 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 4 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 5 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 6 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 7 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 8 [ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 9 ... followed by the usual RCU CPU stalls and deadlock. There was never a case pre commit 00d909a107 where wait_for_complete(&se_cmd->cmd_wait_comp) was able to be interrupted, so to address this for v4.19+ moving forward go ahead and use wait_event_lock_irq_timeout() instead so new code works with all fabric drivers. Also for commit 00d909a107, fix a minor regression in target_release_cmd_kref() to only wake_up the new se_sess->cmd_list_wq only when shutdown has actually been triggered via se_sess->sess_tearing_down. Fixes: 00d909a10710 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted") Cc: <stable@vger.kernel.org> # v4.19+ Cc: Bart Van Assche <bvanassche@acm.org> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-03block: Finish renaming REQ_DISCARD into REQ_OP_DISCARDBart Van Assche1-3/+3
Some time ago REQ_DISCARD was renamed into REQ_OP_DISCARD. Some comments and documentation files were not updated however. Update these comments and documentation files. See also commit 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code"). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-25scsi: target: iscsi: cxgbit: fix csk leakVarun Prakash1-3/+20
csk leak can happen if a new TCP connection gets established after cxgbit_accept_np() returns, to fix this leak free remaining csk in cxgbit_free_np(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21scsi: target: iscsi: Use bin2hex instead of a re-implementationVincent Pelletier1-12/+3
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-21scsi: target: iscsi: Use hex2bin instead of a re-implementationVincent Pelletier1-16/+14
This change has the following effects, in order of descreasing importance: 1) Prevent a stack buffer overflow 2) Do not append an unnecessary NULL to an anyway binary buffer, which is writing one byte past client_digest when caller is: chap_string_to_hex(client_digest, chap_r, strlen(chap_r)); The latter was found by KASAN (see below) when input value hes expected size (32 hex chars), and further analysis revealed a stack buffer overflow can happen when network-received value is longer, allowing an unauthenticated remote attacker to smash up to 17 bytes after destination buffer (16 bytes attacker-controlled and one null). As switching to hex2bin requires specifying destination buffer length, and does not internally append any null, it solves both issues. This addresses CVE-2018-14633. Beyond this: - Validate received value length and check hex2bin accepted the input, to log this rejection reason instead of just failing authentication. - Only log received CHAP_R and CHAP_C values once they passed sanity checks. ================================================================== BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod] Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021 CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd chap_string_to_hex+0x32/0x60 [iscsi_target_mod] chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod] ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod] ? ftrace_caller_op_ptr+0xe/0xe ? __orc_find+0x6f/0xc0 ? unwind_next_frame+0x231/0x850 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? deref_stack_reg+0xd0/0xd0 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? is_module_text_address+0xa/0x11 ? kernel_text_address+0x4c/0x110 ? __save_stack_trace+0x82/0x100 ? ret_from_fork+0x35/0x40 ? save_stack+0x8c/0xb0 ? 0xffffffffc1660000 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod] ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? process_one_work+0x35c/0x640 ? worker_thread+0x66/0x5d0 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod] ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod] chap_main_loop+0x172/0x570 [iscsi_target_mod] ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod] ? rx_data+0xd6/0x120 [iscsi_target_mod] ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod] ? cyc2ns_read_begin.part.2+0x90/0x90 ? _raw_spin_lock_irqsave+0x25/0x50 ? memcmp+0x45/0x70 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod] ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod] ? del_timer+0xe0/0xe0 ? memset+0x1f/0x40 ? flush_sigqueue+0x29/0xd0 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod] ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod] process_one_work+0x35c/0x640 worker_thread+0x66/0x5d0 ? flush_rcu_work+0x40/0x40 kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17fffc000000000() raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00 >ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00 ^ ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-20scsi: target: iblock: split T10 PI SGL across command biosGreg Edwards1-17/+37
When T10 PI is enabled on a backing device for the iblock backstore, the PI SGL for the entire command is attached to the first bio only. This works fine if the command is covered by a single bio, but can result in ref tag errors in the client for the other bios in a multi-bio command, e.g. [ 47.631236] sda: ref tag error at location 2048 (rcvd 0) [ 47.637658] sda: ref tag error at location 4096 (rcvd 0) [ 47.644228] sda: ref tag error at location 6144 (rcvd 0) The command will be split into multiple bios if the number of data SG elements exceeds BIO_MAX_PAGES (see iblock_get_bio()). The bios may later be split again in the block layer on the host after iblock_submit_bios(), depending on the queue limits of the backing device. The block and SCSI layers will pass through the whole PI SGL down to the LLDD however that first bio is split up, but the LLDD may only use the portion that corresponds to the data length (depends on the LLDD, tested with scsi_debug). Split the PI SGL across the bios in the command, so each bio's bio_integrity_payload contains the protection information for the data in the bio. Use an sg_mapping_iter to keep track of where we are in PI SGL, so we know where to start with the next bio. Signed-off-by: Greg Edwards <gedwards@ddn.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-17scsi: iscsi: target: fix spelling mistake "entires" -> "entries"Colin Ian King4-4/+4
Trivial fix to spelling mistake in function name and comment Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-11scsi: iscsi: target: Don't use stack buffer for scatterlistLaura Abbott1-8/+14
Fedora got a bug report of a crash with iSCSI: kernel BUG at include/linux/scatterlist.h:143! ... RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod] ... Call Trace: ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod] ? native_sched_clock+0x3e/0xa0 ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod] kthread+0x120/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This is a BUG_ON for using a stack buffer with a scatterlist. There are two cases that trigger this bug. Switch to using a dynamically allocated buffer for one case and do not assign a NULL buffer in another case. Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30scsi: iscsi: target: Fix conn_ops double freeMike Christie3-75/+77
If iscsi_login_init_conn fails it can free conn_ops. __iscsi_target_login_thread will then call iscsi_target_login_sess_out which will also free it. This fixes the problem by organizing conn allocation/setup into parts that are needed through the life of the conn and parts that are only needed for the login. The free functions then release what was allocated in the alloc functions. With this patch we have: iscsit_alloc_conn/iscsit_free_conn - allocs/frees the conn we need for the entire life of the conn. iscsi_login_init_conn/iscsi_target_nego_release - allocs/frees the parts of the conn that are only needed during login. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values failsVincent Pelletier1-5/+3
Fixes a use-after-free reported by KASAN when later iscsi_target_login_sess_out gets called and it tries to access conn->sess->se_sess: Disabling lock debugging due to kernel taint iSCSI Login timeout on Network Portal [::]:3260 iSCSI Login negotiation failed. ================================================================== BUG: KASAN: use-after-free in iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980 CPU: 1 PID: 980 Comm: iscsi_np Tainted: G O 4.17.8kasan.sess.connops+ #4 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod] ? __sched_text_start+0x8/0x8 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] ? __kthread_parkme+0xcc/0x100 ? parse_args.cold.14+0xd3/0xd3 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Allocated by task 980: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0x112/0x210 iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 980: __kasan_slab_free+0x125/0x170 kfree+0x90/0x1d0 iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 The buggy address belongs to the object at ffff880109d06f00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 456 bytes inside of 512-byte region [ffff880109d06f00, ffff880109d07100) The buggy address belongs to the page: page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 flags: 0x17fffc000008100(slab|head) raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> [rebased against idr/ida changes and to handle ret review comments from Matthew] Signed-off-by: Mike Christie <mchristi@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-27scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()Varun Prakash1-4/+4
DDP programming happens in data path and it can fail because of lack of resources so use pr_debug() instead of pr_info() for this case. Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-26Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds3-34/+21
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
2018-08-21target/iscsi: Allocate session IDs from an IDAMatthew Wilcox3-30/+10
Since the session is never looked up by ID, we can use the more space-efficient IDA instead of the IDR. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-21iscsi target: fix session creation failure handlingMike Christie1-14/+21
The problem is that iscsi_login_zero_tsih_s1 sets conn->sess early in iscsi_login_set_conn_values. If the function fails later like when we alloc the idr it does kfree(sess) and leaves the conn->sess pointer set. iscsi_login_zero_tsih_s1 then returns -Exyz and we then call iscsi_target_login_sess_out and access the freed memory. This patch has iscsi_login_zero_tsih_s1 either completely setup the session or completely tear it down, so later in iscsi_target_login_sess_out we can just check for it being set to the connection. Cc: stable@vger.kernel.org Fixes: 0957627a9960 ("iscsi-target: Fix sess allocation leak in...") Signed-off-by: Mike Christie <mchristi@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds20-433/+508
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-08-14Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+4
Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.