aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tee (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-02-24Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+1
Pull crypto fixes from Herbert Xu: "This fixes a Kconfig-related build error and an integer overflow in chacha20poly1305" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: chacha20poly1305 - prevent integer overflow on large input tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DD
2020-02-13tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DDHongbo Yao1-1/+1
If CRYPTO_DEV_CCP_DD=m and AMDTEE=y, the following error is seen while building call.c or core.c drivers/tee/amdtee/call.o: In function `handle_unload_ta': call.c:(.text+0x35f): undefined reference to `psp_tee_process_cmd' drivers/tee/amdtee/core.o: In function `amdtee_driver_init': core.c:(.init.text+0xf): undefined reference to `psp_check_tee_status Fix the config dependency for AMDTEE here. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-08Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-89/+64
Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-6/+0
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-28Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds9-2/+1342
Pull crypto updates from Herbert Xu: "API: - Removed CRYPTO_TFM_RES flags - Extended spawn grabbing to all algorithm types - Moved hash descsize verification into API code Algorithms: - Fixed recursive pcrypt dead-lock - Added new 32 and 64-bit generic versions of poly1305 - Added cryptogams implementation of x86/poly1305 Drivers: - Added support for i.MX8M Mini in caam - Added support for i.MX8M Nano in caam - Added support for i.MX8M Plus in caam - Added support for A33 variant of SS in sun4i-ss - Added TEE support for Raven Ridge in ccp - Added in-kernel API to submit TEE commands in ccp - Added AMD-TEE driver - Added support for BCM2711 in iproc-rng200 - Added support for AES256-GCM based ciphers for chtls - Added aead support on SEC2 in hisilicon" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits) crypto: arm/chacha - fix build failured when kernel mode NEON is disabled crypto: caam - add support for i.MX8M Plus crypto: x86/poly1305 - emit does base conversion itself crypto: hisilicon - fix spelling mistake "disgest" -> "digest" crypto: chacha20poly1305 - add back missing test vectors and test chunking crypto: x86/poly1305 - fix .gitignore typo tee: fix memory allocation failure checks on drv_data and amdtee crypto: ccree - erase unneeded inline funcs crypto: ccree - make cc_pm_put_suspend() void crypto: ccree - split overloaded usage of irq field crypto: ccree - fix PM race condition crypto: ccree - fix FDE descriptor sequence crypto: ccree - cc_do_send_request() is void func crypto: ccree - fix pm wrongful error reporting crypto: ccree - turn errors to debug msgs crypto: ccree - fix AEAD decrypt auth fail crypto: ccree - fix typo in comment crypto: ccree - fix typos in error msgs crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data crypto: x86/sha - Eliminate casts on asm implementations ...
2020-01-24Merge tag 'tee-optee-fix2-for-5.5' of https://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixesOlof Johansson1-0/+1
Fix OP-TEE compile error with nommu * tag 'tee-optee-fix2-for-5.5' of https://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Fix compilation issue with nommu Link: https://lore.kernel.org/r/20200123101310.GA10320@jax Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-23tee: optee: Fix compilation issue with nommuVincenzo Frascino1-0/+1
The optee driver uses specific page table types to verify if a memory region is normal. These types are not defined in nommu systems. Trying to compile the driver in these systems results in a build error: linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’: linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared (first use in this function); did you mean ‘PREEMPT_MASK’? return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~ PREEMPT_MASK linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is reported only once for each function it appears in linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared (first use in this function) return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~~~~~~~ Make the optee driver depend on MMU to fix the compilation issue. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> [jw: update commit title] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-01-22tee: fix memory allocation failure checks on drv_data and amdteeColin Ian King1-2/+2
Currently the memory allocation failure checks on drv_data and amdtee are using IS_ERR rather than checking for a null pointer. Fix these checks to use the conventional null pointer check. Addresses-Coverity: ("Dereference null return") Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie1-1/+14
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-16tee: amdtee: remove redundant NULL check for poolRijo Thomas1-2/+1
Remove NULL check for pool variable, since in the current code path it is guaranteed to be non-NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-16tee: amdtee: rename err label to err_device_unregisterRijo Thomas1-2/+2
Rename err label to err_device_unregister for better readability. Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-16tee: amdtee: skip tee_device_unregister if tee_device_alloc failsRijo Thomas1-1/+3
Currently, if tee_device_alloc() fails, then tee_device_unregister() is a no-op. Therefore, skip the function call to tee_device_unregister() by introducing a new goto label 'err_free_pool'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-16tee: amdtee: print error message if tee not presentRijo Thomas1-3/+4
If there is no TEE with which the driver can communicate, then print an error message and return. Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-16tee: amdtee: remove unused variable initializationRijo Thomas2-14/+14
Remove unused variable initialization from driver code. If enabled as a compiler option, compiler may throw warning for unused assignments. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-04tee: amdtee: check TEE status during driver initializationRijo Thomas1-0/+6
The AMD-TEE driver should check if TEE is available before registering itself with TEE subsystem. This ensures that there is a TEE which the driver can talk to before proceeding with tee device node allocation. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-04tee: add AMD-TEE driverRijo Thomas9-1/+1333
Adds AMD-TEE driver. * targets AMD APUs which has AMD Secure Processor with software-based Trusted Execution Environment (TEE) support * registers with TEE subsystem * defines tee_driver_ops function callbacks * kernel allocated memory is used as shared memory between normal world and secure world. * acts as REE (Rich Execution Environment) communication agent, which uses the services of AMD Secure Processor driver to submit commands for processing in TEE environment Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-04tee: allow compilation of tee subsystem for AMD CPUsRijo Thomas1-1/+1
Allow compilation of tee subsystem for AMD's CPUs which have a dedicated AMD Secure Processor for Trusted Execution Environment (TEE). Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-03optee: Fix multi page dynamic shm pool allocSumit Garg1-1/+14
optee_shm_register() expected pages to be passed as an array of page pointers rather than as an array of contiguous pages. So fix that via correctly passing pages as per expectation. Fixes: a249dd200d03 ("tee: optee: Fix dynamic shm pool allocations") Reported-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Vincent Cao <vincent.t.cao@intel.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-01-03optee: model OP-TEE as a platform device/driverArd Biesheuvel1-89/+64
To simplify adding ACPI support to the OP-TEE driver, model it as a platform driver. This will permit us to use the generic device property layer for parsing additional properties, regardless of whether DT or ACPI is being used. Note that this change will result in the OP-TEE driver to be loaded automatically on systems that advertise the presence of OP-TEE via the device tree. Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-12-17Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDaniel Vetter1-6/+0
drm-misc-next for v5.6: UAPI Changes: - Add support for DMA-BUF HEAPS. Cross-subsystem Changes: - mipi dsi definition updates, pulled into drm-intel as well. - Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim. - Remove support for dma-buf kmap/kunmap. - Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well. Core Changes: - Small cleanups to ttm. - Fix SCDC definition. - Assorted cleanups to core. - Add todo to remove load/unload hooks, and use generic fbdev emulation. - Assorted documentation updates. - Use blocking ww lock in ttm fault handler. - Remove drm_fb_helper_fbdev_setup/teardown. - Warning fixes with W=1 for atomic. - Use drm_debug_enabled() instead of drm_debug flag testing in various drivers. - Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted) - Various kconfig indentation fixes in core and drivers. - Fix freeing transactions in dp-mst correctly. - Sean Paul is steping down as core maintainer. :-( - Add lockdep annotations for atomic locks vs dma-resv. - Prevent use-after-free for a bad job in drm_scheduler. - Fill out all block sizes in the P01x and P210 definitions. - Avoid division by zero in drm/rect, and fix bounds. - Add drm/rect selftests. - Add aspect ratio and alternate clocks for HDMI 4k modes. - Add todo for drm_framebuffer_funcs and fb_create cleanup. - Drop DRM_AUTH for prime import/export ioctls. - Clear DP-MST payload id tables downstream when initializating. - Fix for DSC throughput definition. - Add extra FEC definitions. - Fix fake offset in drm_gem_object_funs.mmap. - Stop using encoder->bridge in core directly - Handle bridge chaining slightly better. - Add backlight support to drm/panel, and use it in many panel drivers. - Increase max number of y420 modes from 128 to 256, as preparation to add the new modes. Driver Changes: - Small fixes all over. - Fix documentation in vkms. - Fix mmap_sem vs dma_resv in nouveau. - Small cleanup in komeda. - Add page flip support in gma500 for psb/cdv. - Add ddc symlink in the connector sysfs directory for many drivers. - Add support for analogic an6345, and fix small bugs in it. - Add atomic modesetting support to ast. - Fix radeon fault handler VMA race. - Switch udl to use generic shmem helpers. - Unconditional vblank handling for mcde. - Miscellaneous fixes to mcde. - Tweak debug output from komeda using debugfs. - Add gamma and color transform support to komeda for DOU-IPS. - Add support for sony acx424AKP panel. - Various small cleanups to gma500. - Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation. - Add support for Logic PD Type 28 panel. - Use drm_panel_* wrapper functions in exynos/tegra/msm. - Add devicetree bindings for generic DSI panels. - Don't include drm_pci.h directly in many drivers. - Add support for begin/end_cpu_access in udmabuf. - Stop using drm_get_pci_dev in gma500 and mga200. - Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access. - Add devfreq thermal support to panfrost. - Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager. - meson: Add support for OSD1 plane AFBC commit. - Stop displaying garbage when toggling ast primary plane on/off. - More cleanups and fixes to UDL. - Add D32 suport to komeda. - Remove globle copy of drm_dev in gma500. - Add support for Boe Himax8279d MIPI-DSI LCD panel. - Add support for ingenic JZ4770 panel. - Small null pointer deference fix in ingenic. - Remove support for the special tfp420 driver, as there is a generic way to do it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
2019-12-05Merge mainline/master into arm/fixesOlof Johansson1-1/+1
This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc. Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-25drm/tee_shm: Drop dma_buf_k(unmap) supportDaniel Vetter1-6/+0
There's no in-tree users anymore. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: tee-dev@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20191118103536.17675-13-daniel.vetter@ffwll.ch
2019-11-15tee: optee: fix device enumeration error handlingJens Wiklander1-8/+12
Prior to this patch in optee_probe() when optee_enumerate_devices() was called the struct optee was fully initialized. If optee_enumerate_devices() returns an error optee_probe() is supposed to clean up and free the struct optee completely, but will at this late stage need to call optee_remove() instead. This isn't done and thus freeing the struct optee prematurely. With this patch the call to optee_enumerate_devices() is done after optee_probe() has returned successfully and in case optee_enumerate_devices() fails everything is cleaned up with a call to optee_remove(). Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-11-15tee: optee: Fix dynamic shm pool allocationsSumit Garg2-1/+18
In case of dynamic shared memory pool, kernel memory allocated using dmabuf_mgr pool needs to be registered with OP-TEE prior to its usage during optee_open_session() or optee_invoke_func(). So fix dmabuf_mgr pool allocations via an additional call to optee_shm_register(). Also, allow kernel pages to be registered as shared memory with OP-TEE. Fixes: 9733b072a12a ("optee: allow to work without static shared memory") Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-10-23compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann1-1/+1
The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-25tee/shm: untag user pointers in tee_shm_registerAndrey Konovalov1-0/+1
This patch is a part of a series that extends kernel ABI to allow to pass tagged user pointers (with the top byte set to something else other than 0x00) as syscall arguments. tee_shm_register()->optee_shm_unregister()->check_mem_type() uses provided user pointers for vma lookups (via __check_mem_type()), which can only by done with untagged pointers. Untag user pointers in this function. Link: http://lkml.kernel.org/r/4b993f33196b3566ac81285ff8453219e2079b45.1563904656.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-08tee: optee: add might_sleep for RPC requestsRouven Czerwinski1-0/+1
If the kernel is compiled with CONFIG_PREEMPT_VOLUNTARY and OP-TEE is executing a long running workload, the following errors are raised: [ 1705.971228] rcu: INFO: rcu_sched detected stalls on CPUs/tasks: [ 1705.977195] rcu: (detected by 0, t=2102 jiffies, g=51977, q=3) [ 1705.983152] rcu: All QSes seen, last rcu_sched kthread activity 2102 (140596-138494), jiffies_till_next_fqs=1, root ->qsmask 0x0 [ 1705.994729] optee-xtest R running task 0 169 157 0x00000002 While OP-TEE is returning regularly to the kernel due to timer interrupts, the OPTEE_SMC_FUNC_FOREIGN_INTR case does not contain an explicit rescheduling point. Add a might_sleep() to the RPC request case to ensure that the kernel can reschedule another task if OP-TEE requests RPC handling. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner11-110/+11
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-31/+49
Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny1-1/+1
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-28Merge tag 'tee-optee-for-5.2' of http://git.linaro.org:/people/jens.wiklander/linux-tee into arm/driversOlof Johansson1-31/+49
Allow OP-TEE driver to work without static shared memory * tag 'tee-optee-for-5.2' of http://git.linaro.org:/people/jens.wiklander/linux-tee: optee: allow to work without static shared memory Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-17optee: allow to work without static shared memoryVolodymyr Babchuk1-31/+49
On virtualized systems it is possible that OP-TEE will provide only dynamic shared memory support. So it is fine to boot without static SHM enabled if dymanic one is supported. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-03-06Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds8-53/+255
Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-03-01Merge tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee into arm/driversArnd Bergmann3-48/+13
OP-TEE driver - dual license for optee_msg.h and optee_smc.h Generic - add cancellation support to client interface * tag 'tee-misc-for-v5.1' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-28tee: optee: update optee_msg.h and optee_smc.h to dual licenseJerome Forissier2-48/+4
The files optee_msg.h and optee_smc.h (under drivers/tee/optee) contain information originating from the OP-TEE OS project [1] [2], where the licensing terms are BSD 2-Clause. Therefore, apply a dual license to those files. Link: [1] https://github.com/OP-TEE/optee_os/blob/master/core/include/optee_msg.h Link: [2] https://github.com/OP-TEE/optee_os/blob/master/core/arch/arm/include/sm/optee_smc.h Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28tee: add cancellation support to client interfaceIgor Opaniuk1-0/+9
Add support of cancellation request to the TEE kernel internal client interface. Can be used by software TPM drivers, that leverage TEE under the hood (for instance TPM2.0 mobile profile), for requesting cancellation of time-consuming operations (RSA key-pair generation etc.). Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-28tee: optee: add missing of_node_put after of_device_is_availableJulia Lawall1-1/+3
Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: db878f76b9ff ("tee: optee: take DT status property into account") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-20tee: optee: Fix unsigned comparison with less than zeroYueHaibing1-1/+1
The return from the call to tee_client_invoke_func can be a negative error code however this is being assigned to an unsigned variable 'ret' hence the check is always false. Fix this by making 'ret' an int. Detected by Coccinelle ("Unsigned expression compared with zero: ret < 0") Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-20tee: fix possible error pointer ctx dereferencingSumit Garg1-1/+3
Add check for valid ctx pointer and then only dereference ctx to configure supp_nowait flag. Fixes: 42bf4152d8a7 ("tee: add supp_nowait flag in tee_context struct") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-20tee: optee: Initialize some structs using memset instead of bracesNathan Chancellor1-3/+8
Clang warns: drivers/tee/optee/device.c:39:31: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct tee_param param[4] = {0}; ^ {} drivers/tee/optee/device.c:92:48: warning: suggest braces around initialization of subobject [-Wmissing-braces] struct tee_ioctl_open_session_arg sess_arg = {0}; ^ {} 2 warnings generated. One way to fix these warnings is to add additional braces like Clang suggests; however, there has been a bit of push back from some maintainers, who just prefer memset as it is unambiguous, doesn't depend on a particular compiler version, and properly initializes all subobjects [1][2]. Do that here so there are no more warnings. [1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/ [2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/ Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support") Link: https://github.com/ClangBuiltLinux/linux/issues/370 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-01tee: optee: add TEE bus device enumeration supportSumit Garg4-0/+163
OP-TEE provides a pseudo TA to enumerate TAs which can act as devices/ services for TEE bus. So implement device enumeration using invoke function: PTA_CMD_GET_DEVICES provided by pseudo TA to fetch array of device UUIDs. Also register these enumerated devices with TEE bus as "optee-clntX" device. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> [jw: fix optee_enumerate_devices() with no devices found] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-01tee: add bus driver framework for TEE based devicesSumit Garg1-4/+50
Introduce a generic TEE bus driver concept for TEE based kernel drivers which would like to communicate with TEE based devices/services. Also add support in module device table for these new TEE based devices. In this TEE bus concept, devices/services are identified via Universally Unique Identifier (UUID) and drivers register a table of device UUIDs which they can support. So this TEE bus framework registers following apis: - match(): Iterates over the driver UUID table to find a corresponding match for device UUID. If a match is found, then this particular device is probed via corresponding probe api registered by the driver. This process happens whenever a device or a driver is registered with TEE bus. - uevent(): Notifies user-space (udev) whenever a new device is registered on this bus for auto-loading of modularized drivers. Also this framework allows for device enumeration to be specific to corresponding TEE implementation like OP-TEE etc. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2019-02-01tee: add supp_nowait flag in tee_context structSumit Garg2-1/+22
This flag indicates that requests in this context should not wait for tee-supplicant daemon to be started if not present and just return with an error code. It is needed for requests which should be non-blocking in nature like ones arising from TEE based kernel drivers or any in kernel api that uses TEE internal client interface. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-31Merge tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/lateOlof Johansson1-0/+3
OP-TEE dynamic shm log message Adds a log message in the OP-TEE driver to inform that dynamic shared memory is enabled. * tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: log message if dynamic shm is enabled Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-11tee: optee: log message if dynamic shm is enabledVictor Chong1-0/+3
When dynamic shared memory support is enabled in the OP-TEE Trusted OS, it doesn't mean that the driver supports it, which can confuse users during debugging. Log a message when dynamic shared memory is enabled in the driver, to let users know for sure. Suggested-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Victor Chong <victor.chong@linaro.org> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-11tee: optee: avoid possible double list_del()Zhizhou Zhang1-6/+7
This bug occurs when: - a new request arrives, one thread(let's call it A) is pending in optee_supp_req() with req->busy is initial value false. - tee-supplicant is killed, then optee_supp_release() is called, this function calls list_del(&req->link), and set supp->ctx to NULL. And it also wake up process A. - process A continues, it firstly checks supp->ctx which is NULL, then checks req->busy which is false, at last run list_del(&req->link). This triggers double list_del() and results kernel panic. For solve this problem, we rename req->busy to req->in_queue, and associate it with state of whether req is linked to supp->reqs. So we can just only check req->in_queue to make decision calling list_del() or not. Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-26Merge tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee into next/driversOlof Johansson2-8/+107
Misc enhancement for tee driver subsystem * Adds a kernel internal tee client interface allowing other drivers etc to access a TEE * OP-TEE driver takes DT status property into account * tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: add kernel internal client interface tee: optee: take DT status property into account Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24tee: add kernel internal client interfaceJens Wiklander1-7/+106
Adds a kernel internal TEE client interface to be used by other drivers. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-24tee: optee: take DT status property into accountArd Biesheuvel1-1/+1
DT nodes may have a 'status' property which, if set to anything other than 'ok' or 'okay', indicates to the OS that the DT node should be treated as if it was not present. So add that missing logic to the OP-TEE driver. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.