aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tee (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-31Merge tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/lateOlof Johansson1-0/+3
OP-TEE dynamic shm log message Adds a log message in the OP-TEE driver to inform that dynamic shared memory is enabled. * tag 'tee-subsys-optee-for-4.21' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: log message if dynamic shm is enabled Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-11tee: optee: log message if dynamic shm is enabledVictor Chong1-0/+3
When dynamic shared memory support is enabled in the OP-TEE Trusted OS, it doesn't mean that the driver supports it, which can confuse users during debugging. Log a message when dynamic shared memory is enabled in the driver, to let users know for sure. Suggested-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Victor Chong <victor.chong@linaro.org> Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-12-11tee: optee: avoid possible double list_del()Zhizhou Zhang1-6/+7
This bug occurs when: - a new request arrives, one thread(let's call it A) is pending in optee_supp_req() with req->busy is initial value false. - tee-supplicant is killed, then optee_supp_release() is called, this function calls list_del(&req->link), and set supp->ctx to NULL. And it also wake up process A. - process A continues, it firstly checks supp->ctx which is NULL, then checks req->busy which is false, at last run list_del(&req->link). This triggers double list_del() and results kernel panic. For solve this problem, we rename req->busy to req->in_queue, and associate it with state of whether req is linked to supp->reqs. So we can just only check req->in_queue to make decision calling list_del() or not. Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-26Merge tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee into next/driversOlof Johansson2-8/+107
Misc enhancement for tee driver subsystem * Adds a kernel internal tee client interface allowing other drivers etc to access a TEE * OP-TEE driver takes DT status property into account * tag 'tee-drv-for-4.20' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: add kernel internal client interface tee: optee: take DT status property into account Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-24tee: add kernel internal client interfaceJens Wiklander1-7/+106
Adds a kernel internal TEE client interface to be used by other drivers. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-24tee: optee: take DT status property into accountArd Biesheuvel1-1/+1
DT nodes may have a 'status' property which, if set to anything other than 'ok' or 'okay', indicates to the OS that the DT node should be treated as if it was not present. So add that missing logic to the OP-TEE driver. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-08-23Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-2/+10
Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-06-22Merge tag 'drm-misc-next-2018-06-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie1-6/+0
drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma
2018-06-20dma-buf: remove kmap_atomic interfaceChristian König1-6/+0
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
2018-06-20tee: optee: making OPTEE_SHM_NUM_PRIV_PAGES configurable via KconfigSahil Malhotra2-1/+9
This change adds KCONFIG option to set number of pages out of whole shared memory to be used for OP-TEE driver private data structures. Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com> [jw: fixing trivial merge conflict] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-06-19tee: replace getnstimeofday64() with ktime_get_real_ts64()Arnd Bergmann1-1/+1
The two do the same thing, but we want to have a consistent naming in the kernel. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-05-07tee: check shm references are consistent in offset/sizeEtienne Carriere1-0/+11
This change prevents userland from referencing TEE shared memory outside the area initially allocated by its owner. Prior this change an application could not reference or access memory it did not own but it could reference memory not explicitly allocated by owner but still allocated to the owner due to the memory allocation granule. Reported-by: Alexandre Jutras <alexandre.jutras@nxp.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-05-07tee: shm: fix use-after-free via temporarily dropped referenceJann Horn1-2/+3
Bump the file's refcount before moving the reference into the fd table, not afterwards. The old code could drop the file's refcount to zero for a short moment before calling get_file() via get_dma_buf(). This code can only be triggered on ARM systems that use Linaro's OP-TEE. Fixes: 967c9cca2cc5 ("tee: generic TEE subsystem") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-03-06tee: optee: report OP-TEE revision informationJérôme Forissier1-0/+23
When the driver initializes, report the following information about the OP-TEE OS: - major and minor version, - build identifier (if available). Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Matthias Brugger <mbruger@suse.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-03-06tee: optee: GET_OS_REVISION: document a2 as a build identifierJérôme Forissier1-1/+9
In the OPTEE_SMC_CALL_GET_OS_REVISION request, the previously reserved parameter a2 is now documented as being an optional build identifier (such as an SCM revision or commit ID, for instance). A new structure optee_smc_call_get_os_revision_result is introduced to be used when querying the secure OS version, instead of re-using the struct defined for OPTEE_SMC_CALLS_REVISION. Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Matthias Brugger <mbruger@suse.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-03-06tee: correct max value for id allocationPeng Fan1-5/+9
The privileged dev id range is [TEE_NUM_DEVICES / 2, TEE_NUM_DEVICES). The non-privileged dev id range is [0, TEE_NUM_DEVICES / 2). So when finding a slot for them, need to use different max value. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-01-11Merge tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/driversOlof Johansson3-14/+59
This pull request updates the previous tee-drv-dynamic-shm-for-v4.16 pull request with five new patches fixing review comments and errors. Apart from three small fixes there's two larger patches that in the end checks that memory to be registered really is normal cached memory. * tag 'tee-drv-dynamic-shm+fixes-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: shm: Potential NULL dereference calling tee_shm_register() tee: shm: don't put_page on null shm->pages tee: shm: make function __tee_shm_alloc static tee: optee: check type of registered shared memory tee: add start argument to shm_register callback Signed-off-by: Olof Johansson <olof@lixom.net>
2018-01-09tee: shm: Potential NULL dereference calling tee_shm_register()Dan Carpenter1-1/+1
get_user_pages_fast() can return zero in certain error paths. We should handle that or else it means we accidentally return ERR_PTR(0) which is NULL instead of an error pointer. The callers are not expecting that and will crash with a NULL dereference. Fixes: 033ddf12bcf5 ("tee: add register user memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-28tee: shm: don't put_page on null shm->pagesColin Ian King1-3/+5
In the case that shm->pages fails to allocate, the current exit error path will try to put_page on a null shm->pages and cause a null pointer dereference when accessing shm->pages[n]. Fix this by only performing the put_page and kfree on shm->pages if it is not null. Detected by CoverityScan, CID#1463283 ("Dereference after null check") Fixes: 033ddf12bcf5 ("tee: add register user memory") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-28tee: shm: make function __tee_shm_alloc staticColin Ian King1-3/+3
The function __tee_shm_alloc is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol '__tee_shm_alloc' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-28tee: optee: check type of registered shared memoryJens Wiklander1-2/+42
Checks the memory type of the pages to be registered as shared memory. Only normal cached memory is allowed. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-28tee: add start argument to shm_register callbackJens Wiklander3-5/+9
Adds a start argument to the shm_register callback to allow the callback to check memory type of the passed pages. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-21tee: optee: fix header dependenciesArnd Bergmann1-1/+1
The optee driver includes the header files in an unusual order, with asm/pgtable.h before the linux/*.h headers. For some reason this seems to trigger a build failure: drivers/tee/optee/call.c: In function 'optee_fill_pages_list': include/asm-generic/memory_model.h:64:14: error: implicit declaration of function 'page_to_section'; did you mean '__nr_to_section'? [-Werror=implicit-function-declaration] int __sec = page_to_section(__pg); \ drivers/tee/optee/call.c:494:15: note: in expansion of macro 'page_to_phys' optee_page = page_to_phys(*pages) + Let's just include linux/mm.h, which will then get the other header implicitly. Fixes: 3bb48ba5cd60 ("tee: optee: add page list manipulation functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-12-21Merge tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/driversArnd Bergmann13-218/+895
Pull "tee dynamic shm for v4.16" from Jens Wiklander: This pull request enables dynamic shared memory support in the TEE subsystem as a whole and in OP-TEE in particular. Global Platform TEE specification [1] allows client applications to register part of own memory as a shared buffer between application and TEE. This allows fast zero-copy communication between TEE and REE. But current implementation of TEE in Linux does not support this feature. Also, current implementation of OP-TEE transport uses fixed size pre-shared buffer for all communications with OP-TEE OS. This is okay in the most use cases. But this prevents use of OP-TEE in virtualized environments, because: a) We can't share the same buffer between different virtual machines b) Physically contiguous memory as seen by VM can be non-contiguous in reality (and as seen by OP-TEE OS) due to second stage of MMU translation. c) Size of this pre-shared buffer is limited. So, first part of this pull request adds generic register/unregister interface to tee subsystem. The second part adds necessary features into OP-TEE driver, so it can use not only static pre-shared buffer, but whole RAM to communicate with OP-TEE OS. This change is backwards compatible allowing older secure world or user space to work with newer kernels and vice versa. [1] https://www.globalplatform.org/specificationsdevice.asp * tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: shm: inline tee_shm_get_id() tee: use reference counting for tee_context tee: optee: enable dynamic SHM support tee: optee: add optee-specific shared pool implementation tee: optee: store OP-TEE capabilities in private data tee: optee: add registered buffers handling into RPC calls tee: optee: add registered shared parameters handling tee: optee: add shared buffer registration functions tee: optee: add page list manipulation functions tee: optee: Update protocol definitions tee: shm: add page accessor functions tee: shm: add accessors for buffer size and page offset tee: add register user memory tee: flexible shared memory pool creation
2017-12-21Merge tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/driversArnd Bergmann5-189/+276
Pull "Enable async communication with tee supplicant" from Jens Wiklander: This pull request enables asynchronous communication with TEE supplicant by introducing meta parameters in the user space API. The meta parameters can be used to tag requests with an id that can be matched against an asynchronous response as is done here in the OP-TEE driver. Asynchronous supplicant communication is needed by OP-TEE to implement GlobalPlatforms TEE Sockets API Specification v1.0.1. The specification is available at https://www.globalplatform.org/specificationsdevice.asp. This change is backwards compatible allowing older supplicants to work with newer kernels and vice versa. * tag 'tee-drv-async-supplicant-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: support asynchronous supplicant requests tee: add TEE_IOCTL_PARAM_ATTR_META tee: add tee_param_is_memref() for driver use
2017-12-15tee: shm: inline tee_shm_get_id()Volodymyr Babchuk1-11/+0
Now, when struct tee_shm is defined in public header, we can inline small getter functions like this one. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: use reference counting for tee_contextVolodymyr Babchuk3-9/+41
We need to ensure that tee_context is present until last shared buffer will be freed. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: enable dynamic SHM supportVolodymyr Babchuk1-18/+51
Previous patches added various features that are needed for dynamic SHM. Dynamic SHM allows Normal World to share any buffers with OP-TEE. While original design suggested to use pre-allocated region (usually of 1M to 2M of size), this new approach allows to use all non-secure RAM for command buffers, RPC allocations and TA parameters. This patch checks capability OPTEE_SMC_SEC_CAP_DYNAMIC_SHM. If it was set by OP-TEE, then kernel part of OP-TEE will use kernel page allocator to allocate command buffers. Also it will set TEE_GEN_CAP_REG_MEM capability to tell userspace that it supports shared memory registration. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add optee-specific shared pool implementationVolodymyr Babchuk3-0/+99
This is simple pool that uses kernel page allocator. This pool can be used in case OP-TEE supports dynamic shared memory. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: store OP-TEE capabilities in private dataVolodymyr Babchuk2-0/+4
Those capabilities will be used in subsequent patches. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add registered buffers handling into RPC callsVolodymyr Babchuk4-11/+102
With latest changes to OP-TEE we can use any buffers as a shared memory. Thus, it is possible for supplicant to provide part of own memory when OP-TEE asks to allocate a shared buffer. This patch adds support for such feature into RPC handling code. Now when OP-TEE asks supplicant to allocate shared buffer, supplicant can use TEE_IOC_SHM_REGISTER to provide such buffer. RPC handler is aware of this, so it will pass list of allocated pages to OP-TEE. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> [jw: fix parenthesis alignment in free_pages_list()] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add registered shared parameters handlingVolodymyr Babchuk1-15/+63
Now, when client applications can register own shared buffers in OP-TEE, we need to extend ABI for parameter passing to/from OP-TEE. So, if OP-TEE core detects that parameter belongs to registered shared memory, it will use corresponding parameter attribute. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add shared buffer registration functionsVolodymyr Babchuk3-0/+75
This change adds ops for shm_(un)register functions in tee interface. Client application can use these functions to (un)register an own shared buffer in OP-TEE address space. This allows zero copy data sharing between Normal and Secure Worlds. Please note that while those functions were added to optee code, it does not report to userspace that those functions are available. OP-TEE code does not set TEE_GEN_CAP_REG_MEM flag. This flag will be enabled only after all other features of dynamic shared memory will be implemented in subsequent patches. Of course user can ignore presence of TEE_GEN_CAP_REG_MEM flag and try do call those functions. This is okay, driver will register shared buffer in OP-TEE, but any attempts to use this shared buffer will fail. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: add page list manipulation functionsVolodymyr Babchuk2-0/+96
These functions will be used to pass information about shared buffers to OP-TEE. ABI between Linux and OP-TEE is defined in optee_msg.h and optee_smc.h. optee_msg.h defines OPTEE_MSG_ATTR_NONCONTIG attribute for shared memory references and describes how such references should be passed. Note that it uses 64-bit page addresses even on 32 bit systems. This is done to support LPAE and to unify interface. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> [jw: replacing uint64_t with u64 in optee_fill_pages_list()] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: optee: Update protocol definitionsVolodymyr Babchuk2-6/+39
There were changes in REE<->OP-TEE ABI recently. Now ABI allows us to pass non-contiguous memory buffers as list of pages to OP-TEE. This can be achieved by using new parameter attribute OPTEE_MSG_ATTR_NONCONTIG. OP-TEE also is able to use all non-secure RAM for shared buffers. This new capability is enabled with OPTEE_SMC_SEC_CAP_DYNAMIC_SHM flag. This patch adds necessary definitions to the protocol definition files at Linux side. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: add register user memoryJens Wiklander2-28/+219
Added new ioctl to allow users register own buffers as a shared memory. Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com> [jw: moved tee_shm_is_registered() declaration] [jw: added space after __tee_shm_alloc() implementation] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-12-15tee: flexible shared memory pool creationJens Wiklander3-122/+108
Makes creation of shm pools more flexible by adding new more primitive functions to allocate a shm pool. This makes it easier to add driver specific shm pool management. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
2017-11-29optee: support asynchronous supplicant requestsJens Wiklander4-173/+243
Adds support for asynchronous supplicant requests, meaning that the supplicant can process several requests in parallel or block in a request for some time. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Tested-by: Etienne Carriere <etienne.carriere@linaro.org> (b2260 pager=y/n) Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-11-29tee: add TEE_IOCTL_PARAM_ATTR_METAJens Wiklander2-6/+35
Adds TEE_IOCTL_PARAM_ATTR_META which can be used to indicate meta parameters when communicating with user space. These meta parameters can be used by supplicant support multiple parallel requests at a time. Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-11-29tee: add tee_param_is_memref() for driver useJens Wiklander1-14/+2
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-11-29optee: fix invalid of_node_put() in optee_driver_init()Jens Wiklander1-1/+0
The first node supplied to of_find_matching_node() has its reference counter decreased as part of call to that function. In optee_driver_init() after calling of_find_matching_node() it's invalid to call of_node_put() on the supplied node again. So remove the invalid call to of_node_put(). Reported-by: Alex Shi <alex.shi@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-04tee: optee: sync with new naming of interruptsDavid Wang2-10/+10
In the latest changes of optee_os, the interrupts' names are changed to "native" and "foreign" interrupts. Signed-off-by: David Wang <david.wang@arm.com> Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-08-04tee: indicate privileged dev in gen_capsJens Wiklander1-0/+5
Mirrors the TEE_DESC_PRIVILEGED bit of struct tee_desc:flags into struct tee_ioctl_version_data:gen_caps as TEE_GEN_CAP_PRIVILEGED in tee_ioctl_version() Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-08-04tee: optee: interruptible RPC sleeptiger-yu991-5/+2
Prior to this patch RPC sleep was uninterruptible since msleep() is uninterruptible. Change to use msleep_interruptible() instead. Signed-off-by: Tiger Yu <tigeryu99@hotmail.com> Reviewed-by: Joakim Bech <joakim.bech@linaro.org> Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-08-04tee: optee: add const to tee_driver_ops and tee_desc structuresBhumika Goyal1-4/+4
Add const to tee_desc structures as they are only passed as an argument to the function tee_device_alloc. This argument is of type const, so declare these structures as const too. Add const to tee_driver_ops structures as they are only stored in the ops field of a tee_desc structure. This field is of type const, so declare these structure types as const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-08-04tee: tee_shm: Constify dma_buf_ops structures.Arvind Yadav1-1/+1
dma_buf_ops are not supposed to change at runtime. All functions working with dma_buf_ops provided by <linux/dma-buf.h> work with const dma_buf_ops. So mark the non-const structs as const. File size before: text data bss dec hex filename 2026 112 0 2138 85a drivers/tee/tee_shm.o File size After adding 'const': text data bss dec hex filename 2138 0 0 2138 85a drivers/tee/tee_shm.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-08-04tee: optee: fix uninitialized symbol 'parg'Jens Wiklander1-5/+6
Fixes the static checker warning in optee_release(). error: uninitialized symbol 'parg'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2017-05-18Merge tag 'v4.12-rc1' into fixesOlof Johansson1-4/+4
We've received a few fixes branches with -rc1 as base, but our contents was still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on hat was actually merged. Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-10tee: add ARM_SMCCC dependencyArnd Bergmann1-0/+1
For the moment, the tee subsystem only makes sense in combination with the op-tee driver that depends on ARM_SMCCC, so let's hide the subsystem from users that can't select that. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.