aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/thermal/rcar_thermal.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-14thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCsYoshihiro Kaneko1-1/+10
Update calculation for the R-Car Gen3 and RZ/G2 SoCs which have a thermal IP block controlled by this driver. That is the: * R-Car D3 (r8a77995) * R-Car E2 (r8a77990) * R-Car V3M (r8a77970) * RZ/G2E (r8a774c0) The calculation update is as documented in the R-Car Gen3 User's Manual, v1.50 Nov 2018: - When CTEMP is less than 24 T = CTEMP[5:0] * 5.5 - 72 - When CTEMP is equal to/greater than 24 T = CTEMP[5:0] * 5 - 60 This was inspired by a patch in the BSP by Van Do <van.do.xw@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: rcar_thermal: add R8A77990 supportYoshihiro Kaneko1-0/+4
Add support for R-Car E3 (R8A77990) thermal support. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: rcar_thermal: add R8A774C0 supportFabrizio Castro1-0/+4
Add thermal support for the RZ/G2E SoC (a.k.a. R8A774C0). Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-26Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds1-3/+8
Pull thermal SoC updates from Eduardo Valentin: "Several new things coming up. Specifics: - Rework of tsens and hisi thermal drivers - OF-thermal now allows sharing multiple cooling devices on maps - Added support for r8a7744 and R8A77970 on rcar thermal driver - Added support for r8a774a1 on rcar_gen3 thermal driver - New thermal driver stm32 - Fixes on multiple thermal drivers: of-thermal, imx, qoriq, armada, qcom-spmi, rcar, da9062/61" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (41 commits) thermal: da9062/61: Prevent hardware access during system suspend thermal: rcar_thermal: Prevent doing work after unbind thermal: rcar_thermal: Prevent hardware access during system suspend thermal: rcar_gen3_thermal: add R8A77980 support dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings thermal: add stm32 thermal driver dt-bindings: stm32-thermal: add binding documentation thermal: rcar_thermal: add R8A77970 support dt-bindings: thermal: rcar-thermal: document R8A77970 bindings thermal: rcar_thermal: fix duplicate IRQ request dt-bindings: thermal: rcar: Add device tree support for r8a7744 thermal/drivers/hisi: Add the dual clusters sensors for hi3660 thermal/drivers/hisi: Add more sensors channel thermal/drivers/hisi: Remove pointless irq field thermal/drivers/hisi: Use platform_get_irq_byname thermal/drivers/hisi: Replace macro name with relevant sensor location thermal/drivers/hisi: Add multiple sensors support thermal/drivers/hisi: Prepare to support multiple sensors thermal/drivers/hisi: Factor out the probe functions thermal/drivers/hisi: Set the thermal zone private data to the sensor pointer ...
2018-10-25thermal: rcar_thermal: Prevent doing work after unbindGeert Uytterhoeven1-0/+1
When testing bind/unbind on r8a7791/koelsch: WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4 ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10 This happens if the workqueue runs after the device has been unbound. Fix this by cancelling any queued work during remove. Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-25thermal: rcar_thermal: Prevent hardware access during system suspendGeert Uytterhoeven1-2/+2
On r8a7791/koelsch, sometimes the following message is printed during system suspend: rcar_thermal e61f0000.thermal: thermal sensor was broken This happens if the workqueue runs while the device is already suspended. Fix this by using the freezable system workqueue instead, cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from happening during system suspend"). Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-25thermal: rcar_thermal: add R8A77970 supportSergei Shtylyov1-0/+4
Add the R-Car V3M (R8A77970) SoC support to the R-Car gen2 thermal driver. The hardware is the same as in the R-Car D3 (R8A77995) plus the CIVM status register (we don't use). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-25thermal: rcar_thermal: fix duplicate IRQ requestSergei Shtylyov1-1/+1
The driver on R8A77995 requests the same IRQ twice since platform_get_resource() is always called for the 1st IRQ resource. Fixes: 1969d9dc2079 ("thermal: rcar_thermal: add r8a77995 support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-20thermal: rcar_thermal: convert to SPDX identifiersKuninori Morimoto1-14/+2
As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: rcar_thermal: avoid NULL dereference in absence of IRQ resourcesSimon Horman1-1/+1
Ensure that the base address used by a call to rcar_thermal_common_write() may be NULL if the SOC supports interrupts for use with the thermal device but none are defined in DT as is the case for R-Car H1 (r8a7779). Guard against this condition to prevent a NULL dereference when the device is probed. Tested on: * R-Mobile APE6 (r8a73a4) / APE6EVM * R-Car H1 (r8a7779) / Marzen * R-Car H2 (r8a7790) / Lager * R-Car M2-W (r8a7791) / Koelsch * R-Car M2-N (r8a7793) / Gose * R-Car D3 ES1.0 (r8a77995) / Draak Fixes: 1969d9dc2079 ("thermal: rcar_thermal: add r8a77995 support") Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-06-01thermal: rcar_thermal: add r8a77995 supportYoshihiro Kaneko1-32/+126
Add support for R-Car D3 (r8a77995) thermal sensor. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-10-12Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds1-4/+22
Pull thermal managament updates from Zhang Rui: - Enhance thermal "userspace" governor to export the reason when a thermal event is triggered and delivered to user space. From Srinivas Pandruvada - Introduce a single TSENS thermal driver for the different versions of the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for msm8916, msm8960, msm8974 and msm8996 families is also added. From Rajendra Nayak - Introduce hardware-tracked trip points support to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is changed, the trip points immediately below and above the current temperature are found, driver callback is invoked to program the hardware to get notified when either of the two trip points are triggered. Hardware-tracked trip points support for rockchip thermal driver is also added at the same time. From Sascha Hauer, Caesar Wang - Introduce a new thermal driver, which enables TMU (Thermal Monitor Unit) on QorIQ platform. From Jia Hongtao - Introduce a new thermal driver for Maxim MAX77620. From Laxman Dewangan - Introduce a new thermal driver for Intel platforms using WhiskeyCove PMIC. From Bin Gao - Add mt2701 chip support to MTK thermal driver. From Dawei Chien - Enhance Tegra thermal driver to enable soctherm node and set "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei Ni - Add resume support for tango thermal driver. From Marc Gonzalez - several small fixes and improvements for rockchip, qcom, imx, rcar, mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy, Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh Kang * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits) thermal: int3403: Process trip change notification thermal: int340x: New Interface to read trip and notify thermal: user_space gov: Add additional information in uevent thermal: Enhance thermal_zone_device_update for events arm64: tegra: set hot trips for Tegra210 arm64: tegra: set critical trips for Tegra210 arm64: tegra: add soctherm node for Tegra210 arm64: tegra: set hot trips for Tegra132 arm64: tegra: set critical trips for Tegra132 arm64: tegra: use tegra132-soctherm for Tegra132 arm: tegra: set hot trips for Tegra124 arm: tegra: set critical trips for Tegra124 thermal: tegra: add hw-throttle for Tegra132 thermal: tegra: add hw-throttle function of: Add bindings of hw throttle for Tegra soctherm thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register thermal: Add Mediatek thermal driver for mt2701. dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: max77620: Add thermal driver for reporting junction temp thermal: max77620: Add DT binding doc for thermal driver ...
2016-09-27thermal: Enhance thermal_zone_device_update for eventsSrinivas Pandruvada1-1/+2
Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rcar_thermal: don't call thermal_zone_device_unregister when USE_OF_THERMALBui Duc Phuc1-1/+2
devm_thermal_zone_of_sensor_register() case doesn't need to call thermal_zone_device_unregister(). Otherwise, rcar-thermal can't register thermal zone again after rebind. This patch fixes it. Signed-off-by: Bui Duc Phuc <bd-phuc@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: rcar-thermal: enable hwmon when thermal_zone_of_sensor_register is usedKuninori Morimoto1-2/+18
rcar-thermal is supporting both thermal_zone_of_sensor_register() and thermal_zone_device_register(). But thermal_zone_of_sensor_register() doesn't enable hwmon as default. This patch enables it to keep compatibility Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-06thermal: rcar_thermal: Fix priv->zone error handlingDirk Behme1-0/+1
In case thermal_zone_xxx_register() returns an error, priv->zone isn't NULL any more, but contains the error code. This is passed to thermal_zone_device_unregister(), then. This checks for priv->zone being NULL, but the error code is != NULL. So it works with the error code as a pointer. Crashing immediately. To fix this, reset priv->zone to NULL before entering rcar_gen3_thermal_remove(). Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-17thermal: convert rcar_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-1/+1
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: rcar_thermal: don't open code of_device_get_match_data()Wolfram Sang1-2/+1
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-09thermal: rcar: enable to use thermal-zone on DTKuninori Morimoto1-5/+40
This patch enables to use thermal-zone on DT if it was calles as "renesas,rcar-thermal-gen2". Previous style (= non thermal-zone) is still supported by "renesas,rcar-thermal" to keep compatibility for "git bisect". Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rcar: rcar_thermal_get_temp() return error if strange tempKuninori Morimoto1-1/+11
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()Kuninori Morimoto1-4/+5
Current rcar thermal driver sometimes checks irq possibility when it calls rcar_thermal_irq_enable/disable(), but sometimes not. This patch checks it inside rcar_thermal_irq_enable/disable(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rcar: check every rcar_thermal_update_temp() return valueKuninori Morimoto1-10/+12
Every rcar_thermal_update_temp() return value will be checked. And also, rcar_thermal_get_temp() always call rcar_thermal_update_temp() by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-06thermal: rcar: move rcar_thermal_dt_ids to upsideKuninori Morimoto1-6/+6
This patch is prepare for of-thermal support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-16thermal: rcar_thermal: remove redundant operationKuninori Morimoto1-28/+21
Probe error operation and remove operation are same. Let's use same function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-03thermal: consistently use int for temperaturesSascha Hauer1-4/+3
The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-24thermal: rcar: Make error and remove paths symmetrical with initGeert Uytterhoeven1-2/+2
Swap interrupt disable and thermal zone unregistration in the error and remove paths, to make them more symmetrical with the initialization path. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-24thermal: rcar: Fix race condition between init and interruptGeert Uytterhoeven1-13/+9
As soon as the interrupt has been enabled by devm_request_irq(), the interrupt routine may be called, depending on the current status of the hardware. However, at that point rcar_thermal_common hasn't been initialized complely yet. E.g. rcar_thermal_common.base is still NULL, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = c0004000 [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc7-ape6evm-04564-gb6e46cb7cbe82389 #30 Hardware name: Generic R8A73A4 (Flattened Device Tree) task: ee8953c0 ti: ee896000 task.ti: ee896000 PC is at rcar_thermal_irq+0x1c/0xf0 LR is at _raw_spin_lock_irqsave+0x48/0x54 Postpone the call to devm_request_irq() until all initialization has been done to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-12thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-07thermal: rcar: change type of ctemp in rcar_thermal_update_temp()Yoshihiro Shimoda1-2/+2
Since the ctemp is used for rcar_thermal_write() in rcar_thermal_update_temp(), the type of 'ctemp' should be "u32" instead of "int". This patch also changes type of the helper variables 'old' and 'new'. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-07thermal: rcar: fix ENR register valueYoshihiro Shimoda1-3/+8
On R-Mobile APE6, since it has 3 thermal zones, ENR register has enable bits in bit 19-16, bit 11-8 and bit 3-0. However, on R-Car gen2, since it has 1 thermal zone, ENR register has enable bits in bit 3-0. (In other words, the write value should always be 0 for bit 31-4 of ENR register.) So, this patch fixes the ENR register value using I/O resource sets. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-05-15thermal: rcar: remove unnecessary OOM messagesJingoo Han1-4/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync()Geert Uytterhoeven1-2/+2
There's no need for this to be synchronous Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-08thermal: rcar-thermal: update thermal zone only when temperature changesPatrick Titiano1-1/+6
Avoid updating the thermal zone in case an IRQ was triggered but the temperature didn't effectively change. Note this is not a driver issue. Below is a captured debug trace illustrating the purpose of this patch: out of 8 thermal zone updates, only 2 are actually necessary. [ 41.120000] rcar_thermal_work(): cctemp=25000 [ 41.120000] rcar_thermal_work(): nctemp=30000 [ 41.120000] rcar_thermal_work(): temp is now 30000C, update thermal zone [ 58.990000] rcar_thermal_work(): cctemp=30000 [ 58.990000] rcar_thermal_work(): nctemp=30000 [ 58.990000] rcar_thermal_work(): same temp, do not update thermal zone [ 59.290000] rcar_thermal_work(): cctemp=30000 [ 59.290000] rcar_thermal_work(): nctemp=30000 [ 59.290000] rcar_thermal_work(): same temp, do not update thermal zone [ 59.590000] rcar_thermal_work(): cctemp=30000 [ 59.590000] rcar_thermal_work(): nctemp=30000 [ 59.590000] rcar_thermal_work(): same temp, do not update thermal zone [ 59.890000] rcar_thermal_work(): cctemp=30000 [ 59.890000] rcar_thermal_work(): nctemp=30000 [ 59.890000] rcar_thermal_work(): same temp, do not update thermal zone [ 60.190000] rcar_thermal_work(): cctemp=30000 [ 60.190000] rcar_thermal_work(): nctemp=30000 [ 60.190000] rcar_thermal_work(): same temp, do not update thermal zone [ 60.490000] rcar_thermal_work(): cctemp=30000 [ 60.490000] rcar_thermal_work(): nctemp=30000 [ 60.490000] rcar_thermal_work(): same temp, do not update thermal zone [ 60.790000] rcar_thermal_work(): cctemp=30000 [ 60.790000] rcar_thermal_work(): nctemp=35000 [ 60.790000] rcar_thermal_work(): temp is now 35000C, update thermal zone I suspect this may be due to sensor sampling accuracy / fluctuation, but no formal proof. Signed-off-by: Patrick Titiano <ptitiano@baylibre.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-08thermal: rcar-thermal: fix same mask applied twicePatrick Titiano1-1/+1
Mask is already applied preceding the if statement. Remove the second mask. Signed-off-by: Patrick Titiano <ptitiano@baylibre.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-01-08thermal: rcar: comment spellingGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28Merge branches 'misc', 'drv_cleanup', 'devm-cleanup' and 'ti-soc' of .git into nextZhang Rui1-7/+1
2013-05-28thermal: rcar: Fix typo in probe information messageLaurent Pinchart1-1/+1
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-05-20drivers/thermal: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+1
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-05-06Thermal: rcar: Remove redundant platform_set_drvdata()Sachin Kamat1-2/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-04-02thermal: rcar: add pm_runtime_xxx() supportKuninori Morimoto1-0/+11
Current rcar_thermal() didn't care about own power. Without this patch, rcar_thermal doesn't work on APE6 board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-04-02thermal: rcar: tidyup registration failure caseKuninori Morimoto1-7/+16
Current rcar_thermal driver didn't care about rcar_theraml_irq_disable() when registration failure case on _probe(), and _remove(). And, it returns without unregistering thermal zone when registration failure case on _probe(). This patch fixes these issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-03-11thermal: rcar_thermal: propagate return value of thermal_zone_device_registerDevendra Naga1-1/+3
thermal_zone_device_register returns a value contained in the pointer itself use PTR_ERR to obtain the address and return it at the end. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-03-11Thermal: rcar: Convert to devm_ioremap_resource()Sachin Kamat1-10/+6
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-03-11thermal: rcar: fix missing unlock on error in rcar_thermal_update_temp()Wei Yongjun1-4/+5
Add the missing unlock before return from function rcar_thermal_update_temp() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-22thermal: rcar: remove __devinitconstArnd Bergmann1-1/+1
commit 76cc18874 "thermal: rcar: add Device Tree support" added device tree support for this driver, but also added an instance of __devinitconst, which is no longer defined Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Zhang Rui <rui.zhang@intel.com>
2013-02-08thermal: rcar: add Device Tree supportKuninori Morimoto1-0/+7
Support for loading the Renesas R-Car thermal module via devicetree. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06thermal: rcar: remove machine_power_off() from rcar_thermal_notify()Kuninori Morimoto1-1/+0
Machine/System power-off is run in thermal frame work if it become critical temperature. This patch removed pointless machine_power_off() from thermal_zone_device_ops :: .notify Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06thermal: rcar: add interrupt supportKuninori Morimoto1-9/+150
This patch adds interrupt support for R-Car thermal driver. New generation R-Car thermal sensor interrupt controller was different from old generation. This patch supports new generation sensor only, since the old generation interrupt controller had never been used before, and will never be used in the future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06thermal: rcar: add read/write functions for common/priv dataKuninori Morimoto1-7/+41
R-Car thermal driver will use struct common in next feature (interrupt support). But the register address is different between struct priv and common. This patch adds read/write functions for struct common, and use macro technique to avoid wrong register access. This is preparation patch for next feature (interrupt support), therefore, there is no user to use this common read/write function at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-02-06thermal: rcar: multi channel supportKuninori Morimoto1-34/+94
R-Car thermal sensor will be multi channel sensor in next generation. But "IRQ controlling method" and "register mapping" are different between old/new chip. This patch adds multi sensor support. Then, this driver assumes there is common register if platform has IRQ resource. The IRQ will be supported soon. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.