aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/thermal (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-14thermal/cpu_cooling: update policy limits if clipped_freq < policy->maxViresh Kumar1-1/+12
policy->max is the maximum allowed frequency defined by user and clipped_freq is the maximum that thermal constraints allow. If clipped_freq is lower than policy->max, then we need to readjust policy->max. But, if clipped_freq is greater than policy->max, we don't need to do anything. We used to call cpufreq_verify_within_limits() in this case, but it doesn't change anything in this case. Lets skip this unnecessary call and write a comment that explains this. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal/cpu_cooling: rename max_freq as clipped_freq in notifierViresh Kumar1-4/+4
That's what it is for, lets name it properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal/cpu_cooling: rename cpufreq_val as clipped_freqViresh Kumar1-5/+5
That's what it is for, lets name it properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal/cpu_cooling: convert 'switch' block to 'if' block in notifierViresh Kumar1-16/+10
We just need to take care of single event here and there is no need to increase indentation level of most of the code (which causes lines longer that 80 columns to break). Kill the switch block. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal/cpu_cooling: quit early after updating policyViresh Kumar1-0/+1
If a valid cpufreq_dev is found for policy->cpu, we should update the policy and quit the for loop. There is no need to keep traversing the list of cpufreq_dev's. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal/cpu_cooling: No need to initialize max_freq to 0Viresh Kumar1-1/+1
Its always set before getting used, don't initialize it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-14thermal: cpu_cooling: fix lockdep problems in cpu_coolingRussell King1-11/+20
A recent change to the cpu_cooling code introduced a AB-BA deadlock scenario between the cpufreq_policy_notifier_list rwsem and the cooling_cpufreq_lock. This is caused by cooling_cpufreq_lock being held before the registration/removal of the notifier block (an operation which takes the rwsem), and the notifier code itself which takes the locks in the reverse order: ====================================================== [ INFO: possible circular locking dependency detected ] 3.18.0+ #1453 Not tainted ------------------------------------------------------- rc.local/770 is trying to acquire lock: (cooling_cpufreq_lock){+.+.+.}, at: [<c04abfc4>] cpufreq_thermal_notifier+0x34/0xfc but task is already holding lock: ((cpufreq_policy_notifier_list).rwsem){++++.+}, at: [<c0042f04>] __blocking_notifier_call_chain+0x34/0x68 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((cpufreq_policy_notifier_list).rwsem){++++.+}: [<c06bc3b0>] down_write+0x44/0x9c [<c0043444>] blocking_notifier_chain_register+0x28/0xd8 [<c04ad610>] cpufreq_register_notifier+0x68/0x90 [<c04abe4c>] __cpufreq_cooling_register.part.1+0x120/0x180 [<c04abf44>] __cpufreq_cooling_register+0x98/0xa4 [<c04abf8c>] cpufreq_cooling_register+0x18/0x1c [<bf0046f8>] imx_thermal_probe+0x1c0/0x470 [imx_thermal] [<c037cef8>] platform_drv_probe+0x50/0xac [<c037b710>] driver_probe_device+0x114/0x234 [<c037b8cc>] __driver_attach+0x9c/0xa0 [<c0379d68>] bus_for_each_dev+0x5c/0x90 [<c037b204>] driver_attach+0x24/0x28 [<c037ae7c>] bus_add_driver+0xe0/0x1d8 [<c037c0cc>] driver_register+0x80/0xfc [<c037cd80>] __platform_driver_register+0x50/0x64 [<bf007018>] 0xbf007018 [<c0008a5c>] do_one_initcall+0x88/0x1d8 [<c0095da4>] load_module+0x1768/0x1ef8 [<c0096614>] SyS_init_module+0xe0/0xf4 [<c000ec00>] ret_fast_syscall+0x0/0x48 -> #0 (cooling_cpufreq_lock){+.+.+.}: [<c00619f8>] lock_acquire+0xb0/0x124 [<c06ba3b4>] mutex_lock_nested+0x5c/0x3d8 [<c04abfc4>] cpufreq_thermal_notifier+0x34/0xfc [<c0042bf4>] notifier_call_chain+0x4c/0x8c [<c0042f20>] __blocking_notifier_call_chain+0x50/0x68 [<c0042f58>] blocking_notifier_call_chain+0x20/0x28 [<c04ae62c>] cpufreq_set_policy+0x7c/0x1d0 [<c04af3cc>] store_scaling_governor+0x74/0x9c [<c04ad418>] store+0x90/0xc0 [<c0175384>] sysfs_kf_write+0x54/0x58 [<c01746b4>] kernfs_fop_write+0xdc/0x190 [<c010dcc0>] vfs_write+0xac/0x1b4 [<c010dfec>] SyS_write+0x44/0x90 [<c000ec00>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((cpufreq_policy_notifier_list).rwsem); lock(cooling_cpufreq_lock); lock((cpufreq_policy_notifier_list).rwsem); lock(cooling_cpufreq_lock); *** DEADLOCK *** 7 locks held by rc.local/770: #0: (sb_writers#6){.+.+.+}, at: [<c010dda0>] vfs_write+0x18c/0x1b4 #1: (&of->mutex){+.+.+.}, at: [<c0174678>] kernfs_fop_write+0xa0/0x190 #2: (s_active#52){.+.+.+}, at: [<c0174680>] kernfs_fop_write+0xa8/0x190 #3: (cpu_hotplug.lock){++++++}, at: [<c0026a60>] get_online_cpus+0x34/0x90 #4: (cpufreq_rwsem){.+.+.+}, at: [<c04ad3e0>] store+0x58/0xc0 #5: (&policy->rwsem){+.+.+.}, at: [<c04ad3f8>] store+0x70/0xc0 #6: ((cpufreq_policy_notifier_list).rwsem){++++.+}, at: [<c0042f04>] __blocking_notifier_call_chain+0x34/0x68 stack backtrace: CPU: 0 PID: 770 Comm: rc.local Not tainted 3.18.0+ #1453 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c00121c8>] (dump_backtrace) from [<c0012360>] (show_stack+0x18/0x1c) r6:c0b85a80 r5:c0b75630 r4:00000000 r3:00000000 [<c0012348>] (show_stack) from [<c06b6c48>] (dump_stack+0x7c/0x98) [<c06b6bcc>] (dump_stack) from [<c06b42a4>] (print_circular_bug+0x28c/0x2d8) r4:c0b85a80 r3:d0071d40 [<c06b4018>] (print_circular_bug) from [<c00613b0>] (__lock_acquire+0x1acc/0x1bb0) r10:c0b50660 r8:c09e6d80 r7:d0071d40 r6:c11d0f0c r5:00000007 r4:d0072240 [<c005f8e4>] (__lock_acquire) from [<c00619f8>] (lock_acquire+0xb0/0x124) r10:00000000 r9:c04abfc4 r8:00000000 r7:00000000 r6:00000000 r5:c0a06f0c r4:00000000 [<c0061948>] (lock_acquire) from [<c06ba3b4>] (mutex_lock_nested+0x5c/0x3d8) r10:ec853800 r9:c0a06ed4 r8:d0071d40 r7:c0a06ed4 r6:c11d0f0c r5:00000000 r4:c04abfc4 [<c06ba358>] (mutex_lock_nested) from [<c04abfc4>] (cpufreq_thermal_notifier+0x34/0xfc) r10:ec853800 r9:ec85380c r8:d00d7d3c r7:c0a06ed4 r6:d00d7d3c r5:00000000 r4:fffffffe [<c04abf90>] (cpufreq_thermal_notifier) from [<c0042bf4>] (notifier_call_chain+0x4c/0x8c) r7:00000000 r6:00000000 r5:00000000 r4:fffffffe [<c0042ba8>] (notifier_call_chain) from [<c0042f20>] (__blocking_notifier_call_chain+0x50/0x68) r8:c0a072a4 r7:00000000 r6:d00d7d3c r5:ffffffff r4:c0a06fc8 r3:ffffffff [<c0042ed0>] (__blocking_notifier_call_chain) from [<c0042f58>] (blocking_notifier_call_chain+0x20/0x28) r7:ec98b540 r6:c13ebc80 r5:ed76e600 r4:d00d7d3c [<c0042f38>] (blocking_notifier_call_chain) from [<c04ae62c>] (cpufreq_set_policy+0x7c/0x1d0) [<c04ae5b0>] (cpufreq_set_policy) from [<c04af3cc>] (store_scaling_governor+0x74/0x9c) r7:ec98b540 r6:0000000c r5:ec98b540 r4:ed76e600 [<c04af358>] (store_scaling_governor) from [<c04ad418>] (store+0x90/0xc0) r6:0000000c r5:ed76e6d4 r4:ed76e600 [<c04ad388>] (store) from [<c0175384>] (sysfs_kf_write+0x54/0x58) r8:0000000c r7:d00d7f78 r6:ec98b540 r5:0000000c r4:ec853800 r3:0000000c [<c0175330>] (sysfs_kf_write) from [<c01746b4>] (kernfs_fop_write+0xdc/0x190) r6:ec98b540 r5:00000000 r4:00000000 r3:c0175330 [<c01745d8>] (kernfs_fop_write) from [<c010dcc0>] (vfs_write+0xac/0x1b4) r10:0162aa70 r9:d00d6000 r8:0000000c r7:d00d7f78 r6:0162aa70 r5:0000000c r4:eccde500 [<c010dc14>] (vfs_write) from [<c010dfec>] (SyS_write+0x44/0x90) r10:0162aa70 r8:0000000c r7:eccde500 r6:eccde500 r5:00000000 r4:00000000 [<c010dfa8>] (SyS_write) from [<c000ec00>] (ret_fast_syscall+0x0/0x48) r10:00000000 r8:c000edc4 r7:00000004 r6:000216cc r5:0000000c r4:0162aa70 Solve this by moving to finer grained locking - use one mutex to protect the cpufreq_dev_list as a whole, and a separate lock to ensure correct ordering of cpufreq notifier registration and removal. cooling_list_lock is taken within cooling_cpufreq_lock on (un)registration to preserve the behavior of the code, i.e. to atomically add/remove to the list and (un)register the notifier. Fixes: 2dcd851fe4b4 ("thermal: cpu_cooling: Update always cpufreq policy with Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-13thermal: power_allocator: do not use devm* interfacesDmitry Torokhov1-4/+4
The code in question is called outside of standard driver probe()/remove() callbacks and thus will not benefit from use of devm* infrastructure. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-03Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into for-rcZhang Rui4-14/+20
2015-08-03thermal: Drop owner assignment from platform_driverKrzysztof Kozlowski1-1/+0
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-08-02thermal: exynos: Remove unused code related to platform_data on probe()Chanwoo Choi1-3/+0
This patch removes the unused code related to struct exynos_tmu_platform_data because exynos_tmu_probe() don't handle the struct exynos_tmu_platform_data *pdata. Test HW: Exynos4412 - Trats2 board Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-02thermal: exynos: Add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OFChanwoo Choi1-1/+1
The exynos thermal driver use the of_thermal_*() API to parse the basic data for thermal management from devicetree file. So, if CONFIG_EXYNOS_THERMAL is selected without CONFIG_THERMAL_OF, kernel can build it without any problem. But, exynos thermal driver is not working with following error log. This patch add the dependency of CONFIG_THERMAL_OF instead of CONFIG_OF. [ 1.458644] get_th_reg: Cannot get trip points from of-thermal.c! [ 1.459096] get_th_reg: Cannot get trip points from of-thermal.c! [ 1.465211] exynos4412_tmu_initialize: No CRITICAL trip point defined at of-thermal.c! Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-02thermal: exynos: Disable the regulator on probe failureKrzysztof Kozlowski1-0/+2
During probe the regulator (if present) was enabled but not disabled in case of failure. So an unsuccessful probe lead to enabling the regulator which was actually not needed because the device was not enabled. Additionally each deferred probe lead to increase of regulator enable count so it would not be effectively disabled during removal of the device. Test HW: Exynos4412 - Trats2 board Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 498d22f616f6 ("thermal: exynos: Support for TMU regulator defined at device tree") Cc: <stable@vger.kernel.org> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-02thermal: power_allocator: trace the real requested powerJavi Merino1-10/+16
The power allocator governor uses ftrace to output a bunch of internal data for debugging and tuning. Currently, the requested power it outputs is the "weighted" requested power, that is, what each cooling device has requested multiplied by the cooling device weight. It is more useful to trace the real request, without any weight being applied. This commit only affects the data traced, there is no functional change. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-02thermal: remove dangling 'weight_attr' device fileViresh Kumar1-0/+1
This file isn't getting removed while we unbind a device from thermal zone. And this causes following messages when the device is registered again: WARNING: CPU: 0 PID: 2228 at /home/viresh/linux/fs/sysfs/dir.c:31 sysfs_warn_dup+0x60/0x70() sysfs: cannot create duplicate filename '/devices/virtual/thermal/thermal_zone0/cdev0_weight' Modules linked in: cpufreq_dt(+) [last unloaded: cpufreq_dt] CPU: 0 PID: 2228 Comm: insmod Not tainted 4.2.0-rc3-00059-g44fffd9473eb #272 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c00153e8>] (unwind_backtrace) from [<c0012368>] (show_stack+0x10/0x14) [<c0012368>] (show_stack) from [<c053a684>] (dump_stack+0x84/0xc4) [<c053a684>] (dump_stack) from [<c002284c>] (warn_slowpath_common+0x80/0xb0) [<c002284c>] (warn_slowpath_common) from [<c00228ac>] (warn_slowpath_fmt+0x30/0x40) [<c00228ac>] (warn_slowpath_fmt) from [<c012d524>] (sysfs_warn_dup+0x60/0x70) [<c012d524>] (sysfs_warn_dup) from [<c012d244>] (sysfs_add_file_mode_ns+0x13c/0x190) [<c012d244>] (sysfs_add_file_mode_ns) from [<c012d2d4>] (sysfs_create_file_ns+0x3c/0x48) [<c012d2d4>] (sysfs_create_file_ns) from [<c03c04a8>] (thermal_zone_bind_cooling_device+0x260/0x358) [<c03c04a8>] (thermal_zone_bind_cooling_device) from [<c03c2e70>] (of_thermal_bind+0x88/0xb4) [<c03c2e70>] (of_thermal_bind) from [<c03c10d0>] (__thermal_cooling_device_register+0x17c/0x2e0) [<c03c10d0>] (__thermal_cooling_device_register) from [<c03c3f50>] (__cpufreq_cooling_register+0x3a0/0x51c) [<c03c3f50>] (__cpufreq_cooling_register) from [<bf00505c>] (cpufreq_ready+0x44/0x88 [cpufreq_dt]) [<bf00505c>] (cpufreq_ready [cpufreq_dt]) from [<c03d6c30>] (cpufreq_add_dev+0x4a0/0x7dc) [<c03d6c30>] (cpufreq_add_dev) from [<c02cd3ec>] (subsys_interface_register+0x94/0xd8) [<c02cd3ec>] (subsys_interface_register) from [<c03d785c>] (cpufreq_register_driver+0x10c/0x1f0) [<c03d785c>] (cpufreq_register_driver) from [<bf0057d4>] (dt_cpufreq_probe+0x60/0x8c [cpufreq_dt]) [<bf0057d4>] (dt_cpufreq_probe [cpufreq_dt]) from [<c02d03e4>] (platform_drv_probe+0x44/0xa4) [<c02d03e4>] (platform_drv_probe) from [<c02cead8>] (driver_probe_device+0x174/0x2b4) [<c02cead8>] (driver_probe_device) from [<c02ceca4>] (__driver_attach+0x8c/0x90) [<c02ceca4>] (__driver_attach) from [<c02cd078>] (bus_for_each_dev+0x68/0x9c) [<c02cd078>] (bus_for_each_dev) from [<c02ce2f0>] (bus_add_driver+0x19c/0x214) [<c02ce2f0>] (bus_add_driver) from [<c02cf490>] (driver_register+0x78/0xf8) [<c02cf490>] (driver_register) from [<c0009710>] (do_one_initcall+0x8c/0x1d4) [<c0009710>] (do_one_initcall) from [<c05396b0>] (do_init_module+0x5c/0x1b8) [<c05396b0>] (do_init_module) from [<c0086490>] (load_module+0xd34/0xed8) [<c0086490>] (load_module) from [<c0086704>] (SyS_init_module+0xd0/0x120) [<c0086704>] (SyS_init_module) from [<c000f480>] (ret_fast_syscall+0x0/0x3c) ---[ end trace 3be0e7b7dc6e3c4f ]--- Fixes: db91651311c8 ("thermal: export weight to sysfs") Acked-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-07-01Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds1-2/+2
Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...
2015-06-25Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds23-529/+3612
Pull thermal management updates from Zhang Rui: "Specifics: - enhance Thermal Framework with several new capabilities: * use power estimates * compute weights with relative integers instead of percentages * allow governors to have private data in thermal zones * export thermal zone parameters through sysfs Thanks to the ARM thermal team (Javi, Punit, KP). - introduce a new thermal governor: power allocator. First in kernel closed loop PI(D) controller for thermal control. Thanks to ARM thermal team. - enhance OF thermal to allow thermal zones to have sustainable power HW specification. Thanks to Punit. - introduce thermal driver for Intel Quark SoC x1000platform. Thanks to Ong, Boon Leong. - introduce QPNP PMIC temperature alarm driver. Thanks to Ivan T. I. - introduce thermal driver for Hisilicon hi6220. Thanks to kongxinwei. - enhance Exynos thermal driver to handle Exynos5433 TMU. Thanks to Chanwoo C. - TI thermal driver now has a better implementation for EOCZ bit. From Pavel M. - add id for Skylake processors in int340x processor thermal driver. - a couple of small fixes and cleanups." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits) thermal: hisilicon: add new hisilicon thermal sensor driver dt-bindings: Document the hi6220 thermal sensor bindings thermal: of-thermal: add support for reading coefficients property thermal: support slope and offset coefficients thermal: power_allocator: round the division when divvying up power thermal: exynos: Add the support for Exynos5433 TMU thermal: cpu_cooling: Fix power calculation when CPUs are offline thermal: cpu_cooling: Remove cpu_dev update on policy CPU update thermal: export thermal_zone_parameters to sysfs thermal: cpu_cooling: Check memory allocation of power_table ti-soc-thermal: request temperature periodically if hw can't do that itself ti-soc-thermal: implement eocz bit to make driver useful on omap3 cleanup ti-soc-thermal thermal: remove stale THERMAL_POWER_ACTOR select thermal: Default OF created trip points to writable thermal: core: Add Kconfig option to enable writable trips thermal: x86_pkg_temp: drop const for thermal_zone_parameters of: thermal: Introduce sustainable power for a thermal zone thermal: add trace events to the power allocator governor thermal: introduce the Power Allocator governor ...
2015-06-11Merge branches 'release' and 'thermal-soc' of .git into nextZhang Rui19-161/+2544
2015-06-11Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-socZhang Rui17-118/+2494
2015-06-03thermal: hisilicon: add new hisilicon thermal sensor driverkongxinwei3-0/+430
This patch adds the support for hisilicon thermal sensor, within hisilicon SoC. there will register sensors for thermal framework and use device tree to bind cooling device. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: kongxinwei <kong.kongxinwei@hisilicon.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-28kernel/params: constify struct kernel_param_ops usesLuis R. Rodriguez1-2/+2
Most code already uses consts for the struct kernel_param_ops, sweep the kernel for the last offending stragglers. Other than include/linux/moduleparam.h and kernel/params.c all other changes were generated with the following Coccinelle SmPL patch. Merge conflicts between trees can be handled with Coccinelle. In the future git could get Coccinelle merge support to deal with patch --> fail --> grammar --> Coccinelle --> new patch conflicts automatically for us on patches where the grammar is available and the patch is of high confidence. Consider this a feature request. Test compiled on x86_64 against: * allnoconfig * allmodconfig * allyesconfig @ const_found @ identifier ops; @@ const struct kernel_param_ops ops = { }; @ const_not_found depends on !const_found @ identifier ops; @@ -struct kernel_param_ops ops = { +const struct kernel_param_ops ops = { }; Generated-by: Coccinelle SmPL Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Junio C Hamano <gitster@pobox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: cocci@systeme.lip6.fr Cc: linux-kernel@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-05-19Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into for-rcZhang Rui5-7/+89
2015-05-11thermal: of-thermal: add support for reading coefficients propertyEduardo Valentin1-2/+24
In order to avoid having each driver adding their own specific DT property to specify slope and offset, this patch adds a basic coefficient reading from DT thermal zone node. Right now, as the thermal framework does not support multiple sensors, the current coefficients apply only to the only sensor in the thermal zone. The supported equation is a simple linear model: slope * <sensor reading> + offset. slope and offset are read from the coefficients DT property. In the same way as it is described in the DT thermal binding. So, as of today, the thermal framework will support only cases like: /* hotspot = 1 * adc + 6000 */ coefficients = <1 6000>; Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-11thermal: support slope and offset coefficientsEduardo Valentin1-0/+4
It is common to have a linear extrapolation from the current sensor readings and the actual temperature value. This is specially the case when the sensor is in use to extrapolate hotspots. This patch adds slope and offset constants for single sensor linear extrapolation equation. Because the same sensor can be use in different locations, from board to board, these constants are added as part of thermal_zone_params. The constants are available through sysfs. It is up to the device driver to determine the usage of these values. Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-11thermal: power_allocator: round the division when divvying up powerJavi Merino1-1/+2
In situations where there is an uneven number of cooling devices, the division of power among them can lead to a milliwatt being dropped on the floor due to rounding errors. This doesn't sound like a lot, but some devices only grant the lowest cooling device state for their maximum power. So for instance, if the granted_power is the maximum power and all devices are getting their maximum power, one would get max_power - 1, making it choose cooling device state 1, instead of 0. Round the division to make the calculation more accurate. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-09thermal: armada: Update Armada 380 thermal sensor coefficientsNadav Haklai1-3/+3
Improve the Armada 380 thermal sensor accuracy by using updated formula. The updated formula is: Temperature[C degrees] = 0.4761 * tsen_vsen_out - 279.1 Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: <stable@vger.kernel.org> #v3.16 Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-09thermal: rockchip: fix an error codeDan Carpenter1-1/+1
There is a copy and paste bug, "->clk" vs "->pclk", so we return the wrong error code here. Fixes: cbac8f639437 ('thermal: rockchip: add driver for thermal') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-09thermal/powerclamp: fix missing newer package c-statesJacob Pan1-37/+43
Package C8 to C10 was introduced in newer Intel CPUs, we need to include them in the package c-state residency calculation. Otherwise, idle injection target is not accurately maintained by the closed control loop. Also cleaned up the code to make it scale better with large number of c-states. Reported-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-09thermal/intel_powerclamp: add id for broadwell serverJacob Pan1-0/+1
Broadwell server has support for package C-states, idle injection works as expected on this platform. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-09thermal/intel_powerclamp: add __init / __exit annotationsMathias Krause1-4/+4
Mark the module init / exit functions with __init / __exit accodingly. This allows making the intel_powerclamp_ids[] array __initconst, too, as it only gets referenced from powerclamp_probe(). This is safe as file2alias doesn't care about the section, but the symbol name for the MODULE_DEVICE_TABLE alias. Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-08thermal: ti-soc-thermal: OMAP5: Implement Workaround for Errata i813Keerthy3-3/+45
DESCRIPTION Spurious Thermal Alert: Talert can happen randomly while the device remains under the temperature limit defined for this event to trig. This spurious event is caused by a incorrect re-synchronization between clock domains. The comparison between configured threshold and current temperature value can happen while the value is transitioning (metastable), thus causing inappropriate event generation. No spurious event occurs as long as the threshold value stays unchanged. Spurious event can be generated while a thermal alert threshold is modified in CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n. WORKAROUND Spurious event generation can be avoided by performing following sequence when the threshold is modified: 1. Mask the hot/cold events at the thermal IP level. 2. Modify Threshold. 3. Unmask the hot/cold events at the thermal IP level. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-08thermal: ti-soc-thermal: dra7: Implement Workaround for Errata i814Keerthy3-2/+42
Bandgap Temperature read Dtemp can be corrupted DESCRIPTION Read accesses to registers listed below can be corrupted due to incorrect resynchronization between clock domains. Read access to registers below can be corrupted : • CTRL_CORE_DTEMP_MPU/GPU/CORE/DSPEVE/IVA_n (n = 0 to 4) • CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA_n WORKAROUND Multiple reads to CTRL_CORE_TEMP_SENSOR_MPU/GPU/CORE/DSPEVE/IVA[9:0]: BGAP_DTEMPMPU/GPU/CORE/DSPEVE/IVA is needed to discard false value and read right value: 1. Perform two successive reads to BGAP_DTEMP bit field. (a) If read1 returns Val1 and read2 returns Val1, then right value is Val1. (b) If read1 returns Val1, read 2 returns Val2, a third read is needed. 2. Perform third read (a) If read3 returns Val2 then right value is Val2. (b) If read3 returns Val3, then right value is Val3. The above in gist means if val1 and val2 are the same then we can go ahead with that value else we need a third read which will be right since synchronization will be complete by then. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: exynos: Add the support for Exynos5433 TMUChanwoo Choi2-2/+186
This patch adds the support for Exynos5433's TMU (Thermal Management Unit). Exynos5433 has a little different register bit fields as following description: - Support the eight trip points for rising/falling interrupt by using two registers - Read the calibration type (1-point or 2-point) and sensor id from TRIMINFO register - Use a little different register address Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: cpu_cooling: Fix power calculation when CPUs are offlineKapileshwar Singh1-1/+12
Ensure that the CPU for which the frequency is being requested is online. If none of the CPUs are online the requested power is returned as 0. Acked-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: cpu_cooling: Remove cpu_dev update on policy CPU updateKapileshwar Singh1-40/+0
It was initially understood that an update to the cpu_device (cached in cpufreq_cooling_device) was required to ascertain the correct operating point of the device on a cpufreq policy->cpu update or creation or deletion of a cpufreq policy. (e.g. when the existing policy CPU goes offline). This update is not required and it is possible to ascertain the OPPs from the leading CPU in a cpufreq domain even if the CPU is hotplugged out. Fixes: e0128d8ab423 ("thermal: cpu_cooling: implement the power cooling device API") Acked-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: export thermal_zone_parameters to sysfsJavi Merino1-0/+101
It's useful for tuning to be able to edit thermal_zone_parameters from userspace. Export them to the thermal_zone sysfs so that they can be easily changed. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: cpu_cooling: Check memory allocation of power_tableJavi Merino1-0/+4
We allocate the power_table in memory but we don't test whether the allocation succeeded. Return -ENOMEM if kcalloc() fails. Fixes: e0128d8ab423 ("thermal: cpu_cooling: implement the power cooling device API") Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04ti-soc-thermal: request temperature periodically if hw can't do that itselfPavel Machek1-0/+8
When periodic mode is not enabled, it is neccessary to force reads. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04ti-soc-thermal: implement eocz bit to make driver useful on omap3Pavel Machek1-6/+18
For omap3, proper implementation of eocz bit is needed. It was actually a TODO in the driver. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04cleanup ti-soc-thermalPavel Machek2-49/+25
Simplify code by removing goto's where they point to simple return. Avoid confusing |= on error values. Correct whitespace. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: remove stale THERMAL_POWER_ACTOR selectJavi Merino1-1/+0
A previous version of this patch had a config for THERMAL_POWER_ACTOR but it was dropped. Remove the select as it is not doing anything. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reported-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: Default OF created trip points to writablePunit Agrawal1-1/+5
When registering a thermal zone from device tree, default the trip points to writable. By default, only the root user can change these. This allows the trip points to be tweaked after the system has booted. Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: core: Add Kconfig option to enable writable tripsPunit Agrawal2-1/+13
Add a Kconfig option to allow system integrators to control whether userspace tools can change trip temperatures. This option overrides the thermal zone setup in the driver code and must be enabled for platform specified writable trips to come into effect. The original behaviour of requiring root privileges to change trip temperatures remains unchanged. Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: x86_pkg_temp: drop const for thermal_zone_parametersJavi Merino1-1/+1
8754d5115693 ("thermal: introduce the Power Allocator governor") dropped the const attribute in the struct thermal_zone_device. That means that the thermal_zone_params pointer passed to thermal_zone_device_register() also lost the const qualifier. Drop the const in x86_pkg_temp_thermal.c as well to avoid the following warning as reported by the kbuild test robot: drivers/thermal/x86_pkg_temp_thermal.c: In function 'pkg_temp_thermal_device_add': >> drivers/thermal/x86_pkg_temp_thermal.c:450:31: warning: passing argument 6 of 'thermal_zone_device_register' discards 'const' qualifier from pointer target type phy_dev_entry, &tzone_ops, &pkg_temp_tz_params, 0, 0); ^ In file included from drivers/thermal/x86_pkg_temp_thermal.c:30:0: include/linux/thermal.h:378:29: note: expected 'struct thermal_zone_params *' but argument is of type 'const struct thermal_zone_params *' struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, ^ Cc: Jean Delvare <jdelvare@suse.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04of: thermal: Introduce sustainable power for a thermal zonePunit Agrawal1-0/+4
Introduce an optional property called, sustainable-power, which represents the power (in mW) which the thermal zone can safely dissipate. If provided the property is parsed and associated with the thermal zone via the thermal zone parameters. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: add trace events to the power allocator governorJavi Merino2-4/+49
Add trace events for the power allocator governor and the power actor interface of the cpu cooling device. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: introduce the Power Allocator governorJavi Merino5-2/+551
The power allocator governor is a thermal governor that controls system and device power allocation to control temperature. Conceptually, the implementation divides the sustainable power of a thermal zone among all the heat sources in that zone. This governor relies on "power actors", entities that represent heat sources. They can report current and maximum power consumption and can set a given maximum power consumption, usually via a cooling device. The governor uses a Proportional Integral Derivative (PID) controller driven by the temperature of the thermal zone. The output of the controller is a power budget that is then allocated to each power actor that can have bearing on the temperature we are trying to control. It decides how much power to give each cooling device based on the performance they are requesting. The PID controller ensures that the total power budget does not exceed the control temperature. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: cpu_cooling: implement the power cooling device APIJavi Merino1-17/+566
Add a basic power model to the cpu cooling device to implement the power cooling device API. The power model uses the current frequency, current load and OPPs for the power calculations. The cpus must have registered their OPPs using the OPP library. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: extend the cooling device API to include power informationJavi Merino1-0/+52
Add three optional callbacks to the cooling device interface to allow them to express power. In addition to the callbacks, add helpers to identify cooling devices that implement the power cooling device API. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04thermal: let governors have private data for each thermal zoneJavi Merino1-8/+75
A governor may need to store its current state between calls to throttle(). That state depends on the thermal zone, so store it as private data in struct thermal_zone_device. The governors may have two new ops: bind_to_tz() and unbind_from_tz(). When provided, these functions let governors do some initialization and teardown when they are bound/unbound to a tz and possibly store that information in the governor_data field of the struct thermal_zone_device. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.