aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/sh-sci.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-03serial: sh-sci: Terminate TX DMA during buffer flushingGeert Uytterhoeven1-2/+9
While the .flush_buffer() callback clears sci_port.tx_dma_len since commit 1cf4a7efdc71cab8 ("serial: sh-sci: Fix race condition causing garbage during shutdown"), it does not terminate a transmit DMA operation that may be in progress. Fix this by terminating any pending DMA operations, and resetting the corresponding cookie. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20190624123540.20629-3-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-03serial: sh-sci: Fix TX DMA buffer flushing and workqueue racesGeert Uytterhoeven1-7/+15
When uart_flush_buffer() is called, the .flush_buffer() callback zeroes the tx_dma_len field. This may race with the work queue function handling transmit DMA requests: 1. If the buffer is flushed before the first DMA API call, dmaengine_prep_slave_single() may be called with a zero length, causing the DMA request to never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and, with debug enabled: sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126 and DMA timeouts. 2. If the buffer is flushed after the first DMA API call, but before the second, dma_sync_single_for_device() may be called with a zero length, causing the transmit data not to be flushed to RAM, and leading to stale data being output. Fix this by: 1. Letting sci_dma_tx_work_fn() return immediately if the transmit buffer is empty, 2. Extending the critical section to cover all DMA preparational work, so tx_dma_len stays consistent for all of it, 3. Using local copies of circ_buf.head and circ_buf.tail, to make sure they match the actual operation above. Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Suggested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20190624123540.20629-2-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21serial: sh-sci: disable DMA for uart_consoleGeorge G. Davis1-0/+7
As noted in commit 84b40e3b57ee ("serial: 8250: omap: Disable DMA for console UART"), UART console lines use low-level PIO only access functions which will conflict with use of the line when DMA is enabled, e.g. when the console line is also used for systemd messages. So disable DMA support for UART console lines. Reported-by: Michael Rodin <mrodin@de.adit-jv.com> Link: https://patchwork.kernel.org/patch/10929511/ Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16serial: sh-sci: Fix HSCIF RX sampling point adjustmentGeert Uytterhoeven1-1/+1
The calculation of the sampling point has min() and max() exchanged. Fix this by using the clamp() helper instead. Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16serial: sh-sci: Fix HSCIF RX sampling point calculationGeert Uytterhoeven1-1/+3
There are several issues with the formula used for calculating the deviation from the intended rate: 1. While min_err and last_stop are signed, srr and baud are unsigned. Hence the signed values are promoted to unsigned, which will lead to a bogus value of deviation if min_err is negative, 2. Srr is the register field value, which is one less than the actual sampling rate factor, 3. The divisions do not use rounding. Fix this by casting unsigned variables to int, adding one to srr, and using a single DIV_ROUND_CLOSEST(). Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19serial: sh-sci: Fix setting SCSCR_TIE while transferring dataHoan Nguyen An1-11/+1
We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted (if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer, re-enable the SCSCR_TIE bit, which was done at sci_start_tx(). This is unnecessary processing, wasting CPU operation if the data transmission length is large. And further, transmit end, FIFO empty bits disabling have also been performed in the step above. Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11Merge 5.0-rc6 into tty-nextGreg Kroah-Hartman1-1/+8
We need the tty fixes in here for other patches to be based on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30serial: sh-sci: Do not free irqs that have already been freedChris Brandt1-1/+8
Since IRQs might be muxed on some parts, we need to pay attention when we are freeing them. Otherwise we get the ugly WARNING "Trying to free already-free IRQ 20". Fixes: 628c534ae735 ("serial: sh-sci: Improve support for separate TEI and DRI interrupts") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08serial: sh-sci: Make RX/TX DMA function names consistentGeert Uytterhoeven1-12/+12
Most RX/TX-specific DMA functions are prefixed with "sci_dma_[rt]x_". Rename the exceptions to increase consistency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()Geert Uytterhoeven1-2/+3
When submitting a DMA request fails in sci_dma_rx_complete(), the driver tries to fall back to PIO, but that does not work: no more data will be received, or the kernel will even crash. Fix this similar as in (but not identical to) sci_submit_rx(): - On SCIF, PIO cannot take over if any DMA transactions are pending, hence they must be terminated first. - All active cookies must be invalidated, else rx_timer_fn() may trigger a NULL pointer dereference. - Restarting the port is not needed, as it is already running, but serial port interrupts must be directed back from the DMA engine to the CPU. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08serial: sh-sci: Extract sci_dma_rx_reenable_irq()Geert Uytterhoeven1-8/+15
Extract the functionality to direct new serial port interrupts back to the CPU into its own helper, to prepare for using it from a second callsite. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-08serial: sh-sci: Extract sci_dma_rx_chan_invalidate()Geert Uytterhoeven1-6/+13
The cookies and channel pointer for the DMA receive channel are invalidated in two places, and one more is planned. Extract this functionality in a common helper. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-17serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failureGeert Uytterhoeven1-3/+8
On (H)SCIF, sci_submit_rx() is called in the receive interrupt handler. Hence if DMA submission fails, the interrupt handler should resume handling reception using PIO, else no more data is received. Make sci_submit_rx() return an error indicator, so the receive interrupt handler can act appropriately. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-17serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallbackGeert Uytterhoeven1-1/+1
When falling back to PIO, active_rx must be set to a different value than cookie_rx[i], else sci_dma_rx_find_active() will incorrectly find a match, leading to a NULL pointer dereference in rx_timer_fn() later. Use zero instead, which is the same value as after driver initialization. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-17serial: sh-sci: Fix locking in sci_submit_rx()Geert Uytterhoeven1-7/+9
Some callers of sci_submit_rx() hold the port spinlock, others don't. During fallback to PIO, the driver needs to obtain the port spinlock. If the lock was already held, spinlock recursion is detected, causing a deadlock: BUG: spinlock recursion on CPU#0. Fix this by adding a flag parameter to sci_submit_rx() for the caller to indicate the port spinlock is already held, so spinlock recursion can be avoided. Move the spin_lock_irqsave() up, so all DMA disable steps are protected, which is safe as the recently introduced dmaengine_terminate_async() can be called in atomic context. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-11Merge 4.20-rc2 into tty-nextGreg Kroah-Hartman1-4/+4
We want the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10Merge tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-4/+4
Pull tty/serial fixes from Greg KH: "Here are some small tty fixes for 4.20-rc2 One of these missed the original 4.19-final release, I missed that I hadn't done a pull request for it as it was in linux-next and my branch for a long time, that's my fault. The others are small, fixing some reported issues and finally fixing the termios mess for alpha so that glibc has a chance to implement some missing functionality that has been pending for many years now. All of these have been in linux-next with no reported issues" * tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout arch/alpha, termios: implement BOTHER, IBSHIFT and termios2 termios, tty/tty_baudrate.c: fix buffer overrun vt: fix broken display when running aptitude serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
2018-11-09serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeoutYoshihiro Shimoda1-2/+2
This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-09serial: sh-sci: Improve type-safety calling sci_receive_chars()Geert Uytterhoeven1-2/+2
While ptr and port both point to the uart_port structure, the former is the untyped pointer cookie passed to interrupt handlers. Use the correctly typed port variable instead, to improve type-safety. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMAGeert Uytterhoeven1-2/+2
On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before the DMA channel pointer is initialized. Hence this fails, and the driver tries to fall back to PIO. However, at this early phase in the initialization sequence, fallback to PIO does not work, leading to a serial port that cannot receive any data. Fix this by calling sci_submit_rx() after initialization of the DMA channel pointer. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15serial: sh-sci: do not warn if DMA transfers are not supportedUlrich Hecht1-1/+1
Not all (H)SCIF devices support DMA, and failure to set it up is not normally a cause for concern. This patch demotes the associated warning to debug output. Inspired by BSP patch "sci: sh-sci: Fix transfer sequence of unsupport DMA transfer" (6beb1f98d3bd30) by Hiromitsu Yamasaki. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02Revert "serial: sh-sci: Allow for compressed SCIF address"Geert Uytterhoeven1-15/+10
This reverts commit 2d4dd0da45401c7ae7332b4d1eb7bbb1348edde9. This broke earlycon on all Renesas ARM platforms using a SCIF port for the serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value of port->regshift. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"Geert Uytterhoeven1-0/+31
This reverts commit 7acece71a517cad83a0842a94d94c13f271b680c. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: sh-sci: Add earlycon for R7S9210Chris Brandt1-0/+7
Since the register offsets are different for RZ/A2 SCIF, we need to declare a separate string for it. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18Revert "serial: sh-sci: Allow for compressed SCIF address"Geert Uytterhoeven1-15/+10
This reverts commit 2d4dd0da45401c7ae7332b4d1eb7bbb1348edde9. This broke earlycon on all Renesas ARM platforms using a SCIF port for the serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value of port->regshift. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"Geert Uytterhoeven1-0/+31
This reverts commit 7acece71a517cad83a0842a94d94c13f271b680c. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02serial: sh-sci: Improve support for separate TEI and DRI interruptsChris Brandt1-51/+40
Some SCIF versions mux error and break interrupts together and then provide a separate interrupt ID for just TEI/DRI. Allow all 6 types of interrupts to be specified via platform data (or DT) and for any signals that are muxed together (have the same interrupt number) simply register one handler. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPEChris Brandt1-31/+0
There is no more need for SCIx_RZ_SCIFA_REGTYPE now that SCIx_SH4_SCIF_REGTYPE can provide the same register/address definitions. Also, R7S9210 no longer needs a special compatible since the standard "renesas,scif" will work just fine. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02serial: sh-sci: Allow for compressed SCIF addressChris Brandt1-10/+15
Some devices with SCIx_SH4_SCIF_REGTYPE have no space between registers. Use the register area size to determine the spacing between register. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21serial: sh-sci: Drop superfluous assignment in sci_request_dma()Geert Uytterhoeven1-1/+0
No later code uses the assigned value, so it can be dropped. Reported-by: Simon Horman <horms@verge.net.au> Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21serial: sh-sci: Fix use-after-free on subsequent port startupGeert Uytterhoeven1-0/+1
sci_request_irq() checks port->irqstr[j] for a NULL pointer, to decide if a fallback interrupt name string should be allocated or not. While this string is freed during port shutdown, the pointer is not zeroed. Hence on a subsequent startup of the port, it will still be pointing to the freed memory, leading to e.g. WARNING: CPU: 0 PID: 404 at fs/proc/generic.c:388 __proc_create+0xbc/0x260 name len 0 or to a crash (the latter is more likely with CONFIG_DEBUG_SLAB=y, due to the poisoning of freed memory). Instead of zeroeing the pointer at multiple places, preinitialize port->irqstr[j] to zero to fix this. Fixes: 8b0bbd956228ae87 ("serial: sh-sci: Add support for R7S9210") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16serial: sh-sci: Add support for R7S9210Chris Brandt1-2/+75
Add support for a "RZ_SCIFA" which is different than a traditional SCIFA. It looks like a normal SCIF with FIFO data, but with a compressed address space. Also, the break out of interrupts are different then traditinal SCIF: ERI/BRI, RXI, TXI, TEI, DRI. The R7S9210 (RZ/A2) contains this type of SCIF. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06serial: sh-sci: Stop using deprecated dmaengine_terminate_all()Geert Uytterhoeven1-4/+4
As of commit b36f09c3c441a6e5 ("dmaengine: Add transfer termination synchronization support"), dmaengine_terminate_all() is deprecated. Replace calls to dmaengine_terminate_all() in DMA release code by calls to dmaengine_terminate_sync(), as the latter waits until all running completion callbacks have finished. Replace calls to dmaengine_terminate_all() in DMA failure paths by calls to dmaengine_terminate_async(), as these are usually done in atomic context. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06serial: sh-sci: Stop TX DMA workqueue during port shutdownGeert Uytterhoeven1-2/+2
The transmit DMA workqueue is never stopped, hence the work function may be called after the port has been shut down. Fix this race condition by cancelling queued work, if any, before DMA release. Don't initialize the work if DMA initialization failed, as it won't be used anyway. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06serial: sh-sci: Postpone DMA release when falling back to PIOGeert Uytterhoeven1-42/+41
When the sh-sci driver detects an issue with DMA during operation, it falls backs to PIO, and releases all DMA resources. As releasing DMA resources immediately has no advantages, but complicates the code, and is susceptible to races, it is better to postpone this to port shutdown. This allows to remove the locking from sci_rx_dma_release() and sci_tx_dma_release(), but requires keeping a copy of the DMA channel pointers for release during port shutdown. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06serial: sh-sci: Stop RX FIFO timer during port shutdownGeert Uytterhoeven1-0/+2
The RX FIFO timer may be armed when the port is shut down, hence the timer function may still be called afterwards. Fix this race condition by deleting the timer during port shutdown. Fixes: 039403765e5da3c6 ("serial: sh-sci: SCIFA/B RX FIFO software timeout") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06Merge tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printkLinus Torvalds1-2/+2
Pull printk updates from Petr Mladek: - Help userspace log daemons to catch up with a flood of messages. They will get woken after each message even if the console is far behind and handled by another process. - Flush printk safe buffers safely even when panic() happens in the normal context. - Fix possible va_list reuse when race happened in printk_safe(). - Remove %pCr printf format to prevent sleeping in the atomic context. - Misc vsprintf code cleanup. * tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: drop in_nmi check from printk_safe_flush_on_panic() lib/vsprintf: Remove atomic-unsafe support for %pCr serial: sh-sci: Stop using printk format %pCr thermal: bcm2835: Stop using printk format %pCr clk: renesas: cpg-mssr: Stop using printk format %pCr printk: fix possible reuse of va_list variable printk: wake up klogd in vprintk_emit vsprintf: Tweak pF/pf comment lib/vsprintf: Mark expected switch fall-through lib/vsprintf: Replace space with '_' before crng is ready lib/vsprintf: Deduplicate pointer_string() lib/vsprintf: Move pointer_string() upper lib/vsprintf: Make flag_spec global lib/vsprintf: Make strspec global lib/vsprintf: Make dec_spec global lib/test_printf: Mark big constant with UL
2018-06-05serial: sh-sci: Stop using printk format %pCrGeert Uytterhoeven1-2/+2
Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by open-coding the operation. This is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-4-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-05-14serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding versionDaniel Wagner1-5/+3
Commit 40f70c03e33a ("serial: sh-sci: add locking to console write function to avoid SMP lockup") copied the strategy to avoid locking problems in conjuncture with the console from the UART8250 driver. Instead using directly spin_{try}lock_irqsave(), local_irq_save() followed by spin_{try}lock() was used. While this is correct on mainline, for -rt it is a problem. spin_{try}lock() will check if it is running in a valid context. Since the local_irq_save() has already been executed, the context has changed and spin_{try}lock() will complain. The reason why spin_{try}lock() complains is that on -rt the spin locks are turned into mutexes and therefore can sleep. Sleeping with interrupts disabled is not valid. BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995 in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0 CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12 Hardware name: Generic RZ/G1 (Flattened Device Tree) Backtrace: [<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c) r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0 [<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94) [<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194) r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000 [<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74) r5:c06f4d60 r4:c06f4d60 [<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118) r5:c06f4d60 r4:c06f4d60 [<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124) r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798 r4:c06b9914 r3:c02576e4 [<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430) r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798 r4:c06d2798 r3:00000028 [<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0) r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027 r4:00000003 [<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30) r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c r4:c0062fa8 [<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14) [<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84) [<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc) r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523 r4:00000006 [<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178) r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c r4:dfbcf680 [<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248) r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000 r4:df525180 [<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c) r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00 r4:decac000 [<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00 Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23serial: sh-sci: Support for HSCIF RX sampling point adjustmentUlrich Hecht1-23/+42
HSCIF has facilities that allow moving the RX sampling point by between -8 and 7 sampling cycles (one sampling cycles equals 1/15 of a bit by default) to improve the error margin in case of slightly mismatched bit rates between sender and receiver. This patch tries to determine if shifting the sampling point can improve the error margin and will enable it if so. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23serial: sh-sci: Add support for dynamic instancesGeert Uytterhoeven1-0/+8
On DT platforms, the sh-sci driver requires the presence of "serialN" aliases in DT, from which instance IDs are derived. If a DT alias is missing, the drivers fails to probe the corresponding serial port. This becomes cumbersome when considering DT overlays, as currently there is no upstream support for dynamically updating the /aliases node in DT. Furthermore, even in the presence of such support, hardcoded instance IDs in independent overlays are prone to conflicts. Hence add support for dynamic instance IDs, to be used in the absence of a DT alias. This makes serial ports behave similar to I2C and SPI buses, which already support dynamic instances. Ports in use are tracked using a simple bitmask of type unsigned long, which is sufficient to handle all current hardware (max. 18 ports). The maximum number of serial ports is still fixed, and configurable through Kconfig. Range validation is done through both Kconfig and a compile-time check. Due to the fixed maximum number of serial ports, dynamic and static instances share the same ID space. Static instances added later are rejected when conflicting with dynamic instances registered earlier. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-20Merge 4.16-rc6 into tty-nextGreg Kroah-Hartman1-0/+2
We want the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28serial: sh-sci: Fix out-of-bounds access through DT aliasGeert Uytterhoeven1-0/+4
The sci_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_SH_SCI_NR_UARTS), so this can even be triggered using a legitimate DTB. Fixes: 97ed9790c514066b ("serial: sh-sci: Remove unused platform data capabilities field") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28serial: sh-sci: prevent lockup on full TTY buffersUlrich Hecht1-0/+2
When the TTY buffers fill up to the configured maximum, a system lockup occurs: [ 598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 598.825796] 0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1 [ 598.832577] (detected by 3, t=62517 jiffies, g=296, c=295, q=126) [ 598.838755] Task dump for CPU 0: [ 598.841977] swapper/0 R running task 0 0 0 0x00000022 [ 598.849023] Call trace: [ 598.851476] __switch_to+0x98/0xb0 [ 598.854870] (null) This can be prevented by doing a dummy read of the RX data register. This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0; reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms as well. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable <stable@vger.kernel.org> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28serial: sh-sci: use hrtimer for receive timeoutUlrich Hecht1-17/+30
High latencies of classic timers cause performance issues for high- speed serial transmissions. This patch transforms rx_timer into an hrtimer to reduce the minimum latency. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09treewide: Use DEVICE_ATTR_RWJoe Perches1-1/+1
Convert DEVICE_ATTR uses to DEVICE_ATTR_RW where possible. Done with perl script: $ git grep -w --name-only DEVICE_ATTR | \ xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(\s*S_IRUGO\s*\|\s*S_IWUSR|\s*S_IWUSR\s*\|\s*S_IRUGO\s*|\s*0644\s*)\)?\s*,\s*\1_show\s*,\s*\1_store\s*\)/DEVICE_ATTR_RW(\1)/g; print;}' Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook1-9/+7
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-08tty: serial: Remove redundant license textGreg Kroah-Hartman1-4/+0
Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby <jslaby@suse.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04serial: sh-sci: Fix unlocked access to SCSCR registerTakatoshi Akiyama1-9/+16
The SCSCR register access in sci_break_ctl() is not locked. sci_start_tx() and sci_set_termios() changes the SCSCR register, but does not lock sci_port. Therefore, this patch adds lock during register access. Also, remove the log output that leads to a double lock. Some analysis of where locks are not taken is as follows. It appears that the lock is not taken in: - sci_start_tx(), sci_stop_tx() as this is installed as a callback. And all callers of the callback take the lock. - start_rx as callers take the lock. - stop_rx. this is both installed as a callback and called directly. In both cases the caller takes the lock. Signed-off-by: Takatoshi Akiyama <takatoshi.akiyama.kj@ps.hitachi-solutions.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.