aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/sprd_serial.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-04-16serial: sprd: Fix a copy-paste err in sprd_request_dma()YueHaibing1-1/+1
when dma_request_chan rx_dma fails, dev_err log should print rx_dma err log. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28serial: sprd: Add DMA mode supportLanqing Liu1-14/+426
Add DMA mode support for the Spreadtrum serial controller. Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28serial: sprd: Add power management for the Spreadtrum serial controllerLanqing Liu1-4/+57
This patch adds power management for the Spreadtrum serial controller. Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26serial: sprd: Modify the baud rate calculation formulaLanqing Liu1-1/+1
When the source clock is not divisible by the expected baud rate and the remainder is not less than half of the expected baud rate, the old formular will round up the frequency division coefficient. This will make the actual baud rate less than the expected value and can not meet the external transmission requirements. Thus this patch modifies the baud rate calculation formula to support the serial controller output the maximum baud rate. Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: sprd: Fix the indentation issueBaolin Wang1-24/+22
Make the macros' definition and code have the same correct indentation. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: sprd: Change 'int' to 'unsigned int'Baolin Wang1-4/+5
The register offset value should be 'unsigned int' type. Moreover, prefer 'unsigned int' to bare use of 'unsigned'. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: sprd: Remove unnecessary resource validationBaolin Wang1-5/+2
The devm_ioremap_resource() will valid the resources, thus remove the unnecessary resource validation in the driver. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: sprd: Use readable macros instead of magic numberBaolin Wang1-8/+17
Define readable macros instead of magic number to make code more readable. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-18serial: sprd: Remove unused structureBaolin Wang1-11/+0
Remove the unused reg_backup structure. Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: serial: Remove redundant license textGreg Kroah-Hartman1-9/+0
Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby <jslaby@suse.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tty: serial: sprd: fix error return code in sprd_probe()Gustavo A. R. Silva1-2/+2
platform_get_irq() returns an error code, but the sprd_serial driver ignores it and always returns -ENODEV. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Also, notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-30serial: sprd: clear timeout interrupt only rather than all interruptsLanqing Liu1-1/+3
On Spreadtrum's serial device, nearly all of interrupts would be cleared by hardware except timeout interrupt. This patch removed the operation of clearing all interrupt in irq handler, instead added an if statement to check if the timeout interrupt is supposed to be cleared. Wrongly clearing timeout interrupt would lead to uart data stay in rx fifo, that means the driver cannot read them out anymore. Signed-off-by: Lanqing Liu <lanqing.liu@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08serial: sprd: adjust TIMEOUT to a big valueWei Qiao1-1/+1
SPRD_TIMEOUT was 256, which is too small to wait until the status switched to workable in a while loop, so that the earlycon could not work correctly. Signed-off-by: Wei Qiao <wei.qiao@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-27tty: serial: constify uart_ops structuresBhumika Goyal1-1/+1
Declare uart_ops structures as const as they are only stored in the ops field of an uart_port structure. This field is of type const, so uart_ops structures having this property can be made const too. File size details before and after patching. First line of every .o file shows the file size before patching and second line shows the size after patching. text data bss dec hex filename 2977 456 64 3497 da9 drivers/tty/serial/amba-pl010.o 3169 272 64 3505 db1 drivers/tty/serial/amba-pl010.o 3109 456 0 3565 ded drivers/tty/serial/efm32-uart.o 3301 272 0 3573 df5 drivers/tty/serial/efm32-uart.o 10668 753 1 11422 2c9e drivers/tty/serial/icom.o 10860 561 1 11422 2c9e drivers/tty/serial/icom.o 23904 408 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 24088 224 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 10516 560 4 11080 2b48 drivers/tty/serial/ioc4_serial.o 10709 368 4 11081 2b49 drivers/tty/serial/ioc4_serial.o 7853 648 1216 9717 25f5 drivers/tty/serial/mpsc.o 8037 456 1216 9709 25ed drivers/tty/serial/mpsc.o 10248 456 0 10704 29d0 drivers/tty/serial/omap-serial.o 10440 272 0 10712 29d8 drivers/tty/serial/omap-serial.o 8122 532 1984 10638 298e drivers/tty/serial/pmac_zilog.o 8306 340 1984 10630 2986 drivers/tty/serial/pmac_zilog.o 3808 456 0 4264 10a8 drivers/tty/serial/pxa.o 4000 264 0 4264 10a8 drivers/tty/serial/pxa.o 21781 3864 0 25645 642d drivers/tty/serial/serial-tegra.o 22037 3608 0 25645 642d drivers/tty/serial/serial-tegra.o 2481 456 96 3033 bd9 drivers/tty/serial/sprd_serial.o 2673 272 96 3041 be1 drivers/tty/serial/sprd_serial.o 5534 300 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 5630 204 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 6730 1576 128 8434 20f2 drivers/tty/serial/vt8500_serial.o 6986 1320 128 8434 20f2 drivers/tty/serial/vt8500_serial.o Cross compiled for mips architecture. 3005 488 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 3189 304 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 4272 196 1056 5524 1594 drivers/tty/serial/dz.o 4368 100 1056 5524 1594 drivers/tty/serial/dz.o 6551 144 16 6711 1a37 drivers/tty/serial/ip22zilog.o 6647 48 16 6711 1a37 drivers/tty/serial/ip22zilog.o 9612 428 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 9708 332 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 4156 296 16 4468 1174 drivers/tty/serial/ar933x_uart.o 4252 200 16 4468 1174 drivers/tty/serial/ar933x_uart.o Cross compiled for arm archiecture. 11716 1780 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 11808 1688 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 13352 596 56 14004 36b4 drivers/tty/serial/amba-pl011.o 13444 504 56 14004 36b4 drivers/tty/serial/amba-pl011.o Cross compiled for sparc architecture. 4664 528 32 5224 1468 drivers/tty/serial/sunhv.o 4848 344 32 5224 1468 drivers/tty/serial/sunhv.o 8080 332 28 8440 20f8 drivers/tty/serial/sunzilog.o 8184 228 28 8440 20f8 drivers/tty/serial/sunzilog.o Cross compiled for ia64 architecture. 10226 549 472 11247 2bef drivers/tty/serial/sn_console.o 10414 365 472 11251 2bf3 drivers/tty/serial/sn_console.o The files drivers/tty/serial/zs.o, drivers/tty/serial/lpc32xx_hs.o and drivers/tty/serial/lantiq.o did not compile. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann1-1/+1
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-06earlycon: Use common framework for earlycon declarationsPeter Hurley1-2/+0
Use a single common table of struct earlycon_id for both command line and devicetree. Re-define OF_EARLYCON_DECLARE() macro to instance a unique earlycon declaration (the declaration is only guaranteed to be unique within a compilation unit; separate compilation units must still use unique earlycon names). The semantics of OF_EARLYCON_DECLARE() is different; it declares an earlycon which can matched either on the command line or by devicetree. EARLYCON_DECLARE() is semantically unchanged; it declares an earlycon which is matched by command line only. Remove redundant instances of EARLYCON_DECLARE(). This enables all earlycons to properly initialize struct console with the appropriate name and index, which improves diagnostics and enables direct earlycon-to-console handoff. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13serial/sprd_serial: Deinline wait_for_xmitr, save 165 bytesDenys Vlasenko1-1/+1
This function compiles to 141 bytes of machine code. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Jiri Slaby <jslaby@suse.com> CC: linux-serial@vger.kernel.org Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04tty: serial: sprd: Fix module autoload for OF platform driverLuis de Bethencourt1-0/+1
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12serial: sprd: check for NULL after calling devm_clk_getFernando Guzman Lugo1-1/+1
In platforms which does not use CLK framework (HAVE_CLK not set), the clk_* functions return NULL instead of an error. This patch handles that scenario. Signed-off-by: Fernando Guzman Lugo <fernando.guzman.lugo@intel.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09Merge 4.0-rc3 into tty-testingGreg Kroah-Hartman1-1/+5
This resolves a merge issue in drivers/tty/serial/8250/8250_pci.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07serial: sprd: Fix missing spin_unlock in sprd_handle_irq()Axel Lin1-1/+3
Fix return from sprd_handle_irq() with spin_lock held. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07serial: sprd: Fix iotypePeter Hurley1-1/+3
The Spreadtrum UART is accessed with mmio; declare the proper iotype. Also prevent userspace from assigning any other iotype via ioctl(TIOCSSERIAL). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07sprd_serial: compile sprd_suspend and sprd_resume conditionallyPaul Bolle1-0/+2
Building sprd_serial.o when CONFIG_PM_SLEEP is not defined triggers these warnings: drivers/tty/serial/sprd_serial.c:755:12: warning: ‘sprd_suspend’ defined but not used [-Wunused-function] static int sprd_suspend(struct device *dev) ^ drivers/tty/serial/sprd_serial.c:764:12: warning: ‘sprd_resume’ defined but not used [-Wunused-function] static int sprd_resume(struct device *dev) ^ Let's compile these functions only when CONFIG_PM_SLEEP is defined. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02tty/serial: Add Spreadtrum sc9836-uart driver supportChunyan Zhang1-0/+793
Add a full sc9836-uart driver for SC9836 SoC which is based on the spreadtrum sharkl64 platform. This driver also support earlycon. Originally-by: Lanqing Liu <lanqing.liu@spreadtrum.com> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>