aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-06-27serial: kgdboc: Fix typo in commentXiang wangx1-1/+1
Delete the redundant word 'the'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220620104653.5451-1-wangxiang@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27tty: serial: Fix refcount leak bug in ucc_uart.cLiang He1-0/+2
In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27drivers: tty: serial: Add missing of_node_put() in serial-tegra.cLiang He1-0/+1
In tegra_uart_init(), of_find_matching_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220615111747.3963930-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: Drop timeout from uart_portIlpo Järvinen2-21/+10
Since commit 31f6bd7fad3b ("serial: Store character timing information to uart_port"), per frame timing information is available on uart_port. Uart port's timeout can be derived from frame_time by multiplying with fifosize. Most callers of uart_poll_timeout are not made under port's lock. To be on the safe side, make sure frame_time is only accessed once. As fifo_size is effectively a constant, it shouldn't cause any issues. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613113905.22962-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250_pericom: Use UART_LCR_DLABIlpo Järvinen1-1/+1
Use UART_LCR_DLAB instead of literal. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613075736.12283-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: 8250: Use UART_LCR_WLEN8 instead of literalIlpo Järvinen1-1/+1
Use UART_LCR_WLEN8 instead of literal 0x03 in size_fifo(). Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220613075736.12283-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-27serial: sifive: Remove useless license text when SPDX-License-Identifier is already usedChristophe JAILLET1-10/+0
An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dbc54eff6f4e077d9126054f395d5bc5b3405917.1654936915.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnodeAndy Shevchenko1-2/+2
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help cleaning up other parts of the kernel from OF specific code. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # for i2c-mpc Acked-by: Wolfram Sang <wsa@kernel.org> # for the I2C part Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for mscan/mpc5xxx_can Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220507100147.5802-2-andriy.shevchenko@linux.intel.com
2022-06-20Merge tag 'v5.19-rc3' into tty-nextGreg Kroah-Hartman3-3/+9
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-15serial: qcom_geni_serial: Disable MMIO tracing for geni serialSai Prakash Ranjan1-0/+3
Disable MMIO tracing for geni serial driver to prevent excessive logging. Any access over serial console would involve a lot of TX and RX register accesses (and few others), so these MMIO read/write trace events in these drivers cause a lot of unwanted noise because of the high frequency of such operations and it is not very useful tracing these events for such drivers. Given we want to enable these trace events on development devices (maybe not production devices) where performance also really matters so that we don't regress other components by wasting CPU cycles and memory collecting these traces, it makes more sense to disable these traces from such drivers. Also another reason to disable these traces would be to prevent recursive tracing when we display the trace buffer containing these MMIO trace events since writing onto serial console would further record MMIO traces. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-10serial: 8250: Store to lsr_save_flags after lsr readIlpo Järvinen1-0/+2
Not all LSR register flags are preserved across reads. Therefore, LSR readers must store the non-preserved bits into lsr_save_flags. This fix was initially mixed into feature commit f6f586102add ("serial: 8250: Handle UART without interrupt on TEMT using em485"). However, that feature change had a flaw and it was reverted to make room for simpler approach providing the same feature. The embedded fix got reverted with the feature change. Re-add the lsr_save_flags fix and properly mark it's a fix. Link: https://lore.kernel.org/all/1d6c31d-d194-9e6a-ddf9-5f29af829f3@linux.intel.com/T/#m1737eef986bd20cf19593e344cebd7b0244945fc Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Cc: stable <stable@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@penugtronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/f4d774be-1437-a550-8334-19d8722ab98c@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250: Remove serial_rs485 sanitization from em485Ilpo Järvinen1-16/+2
Serial core handles serial_rs485 sanitization. When em485 init fails, there are two possible paths of entry: 1) uart_rs485_config (init path) that fully clears port->rs485 on error. 2) ioctl path with a pre-existing, valid port->rs485 unto which the kernel falls back on error and port->rs485 should therefore be kept untouched. The temporary rs485 struct is not returned to userspace in case of error so its flag don't matter. ...Thus SER_RS485_ENABLED clearing on error can/should be dropped. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-37-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: sc16is7xx: Remove serial_rs485 assignmentIlpo Järvinen1-1/+0
Serial core handles serial_rs485 assignment. It is safe to remove this assignment because sc16is7xx_reg_proc() takes port.lock at start (and sc16is7xx_reconf_rs485() would too). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-36-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: mcf: Remove serial_rs485 assignmentIlpo Järvinen1-1/+0
Serial core handles serial_rs485 assignment. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-35-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_exar: Remove serial_rs485 assignmentIlpo Järvinen1-2/+0
Serial core handles serial_rs485 assignment. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-34-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: max310x: Remove serial_rs485 sanitizationIlpo Järvinen1-2/+0
Serial core handles serial_rs485 sanitization. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-33-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: imx: Remove serial_rs485 sanitizationIlpo Järvinen1-4/+0
The driver provides different rs485_supported for the case where RTS is not available making it unnecessary to handle it in imx_uart_rs485_config. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-32-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: fsl_lpuart: Call core's sanitization and remove custom oneIlpo Järvinen1-17/+0
Serial core handles serial_rs485 sanitization. Remove custom sanitization from lpuart_config_rs485. This change loses dev_err when SER_RS485_RX_DURING_TX is set due to incorrect configuration. Other drivers do not do similar prinout for full-duplex case and it should be done in serial core if it is desirable to notify on this condition. Personally, I doesn't see it important because the kernel gracefully downgrades to half-duplex. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-31-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: pl011: Remove serial_rs485 sanitizationIlpo Järvinen1-5/+0
Serial core handles serial_rs485 sanitization. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-30-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_pci: Remove serial_rs485 sanitizationIlpo Järvinen1-14/+0
Serial core handles serial_rs485 sanitization and copying rs485 struct. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-29-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250: lpc18xx: Remove serial_rs485 sanitizationIlpo Järvinen1-13/+0
Serial core handles serial_rs485 sanitization and copying rs485 struct. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-28-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_fintek: Remove serial_rs485 sanitizationIlpo Järvinen1-14/+0
Serial core handles serial_rs485 sanitization and copying rs485 struct. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-27-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_dwlib: Remove serial_rs485 sanitizationIlpo Järvinen1-10/+0
Serial core handles serial_rs485 sanitization and rs485 struct assignment. As serial_rs485 is already clear for the non-RS485 case by serial core, there no need to clear flags in the driver. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-26-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: return -EINVAL for non-legacy RS485 flagsIlpo Järvinen1-0/+24
In order to be add new flags more cleanly and safely, return -EINVAL from TIOCSRS485 ioctl for the flags bits which are not among the current legacy ones. This might cause a regression for userspace as those non-flag bits do not currently trigger -EINVAL. However, it would only occur if the userspace is sending garbage bits so perhaps we'll get away with this change. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-25-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: Clear rs485 struct when non-RS485 mode is setIlpo Järvinen1-1/+11
When SER_RS485_ENABLED is not set, having any other flag/field set in serial_rs485 struct does not have an effect different from not having them set. Thus, make the serial_rs485 struct also match the behavior for all flags, not just SER_RS485_ENABLED. Some drivers do similar clearing of rs485 struct in their rs485_config() already, but not all. This change makes the behavior consistent across drivers. Don't try to validate rs485 struct further when no RS485 is requested, this silences some bogus warnings. This change has (minor) userspace visible impact. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-24-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: Sanitize rs485_structIlpo Järvinen1-4/+29
Sanitize serial_rs485 struct before calling into rs485_setup. The drivers provide supported_rs485 to help sanitization of the fields. If neither of SER_RS485_RTS_ON_SEND or SER_RS485_RTS_AFTER_SEND supported, don't pretend they can be set to sane settings but clear them both instead. If only one of them is supported it may look tempting to use the one driver supports to set the other, however, the userspace does not have that information readily available so it wouldn't be helpful. While adjusting the documentation, remove also the claim that TIOCGRS485 would call driver specific code. In reality, it does nothing else than copies the stored serial_rs485 structure from uart_port to userspace. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-23-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: stm32: Fill in rs485_supportedIlpo Järvinen1-0/+8
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-22-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: sc16is7xx: Fill in rs485_supportedIlpo Järvinen1-0/+7
Add information on supported serial_rs485 features. This driver does not support delay_rts_after_send but the pre-existing behavior is to return -EINVAL if delay_rts_after_send is non-zero. In contrast, other drivers that do not support delay_rts_after_send either zero delay_rts_after_send or do not care (leave the inaccurate value). As changing this would cause userspace visible impact, the change is not attempted here. But perhaps it should be still tried (maybe nobody finds that kind of API oddity significant)? Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-21-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: omap: Fill in rs485_supportedIlpo Järvinen1-0/+8
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-20-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: mcf: Fill in rs485_supportedIlpo Järvinen1-0/+6
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-19-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: max310x: Fill in rs485_supportedIlpo Järvinen1-0/+7
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-18-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: imx: Fill in rs485_supportedIlpo Järvinen1-0/+13
Add information on supported serial_rs485 features. In the case where RTS is lacking, RS485 cannot be enabled so provide zero rs485_supported for that case. Perhaps it would make sense to not provide rs485_config() at all in that case but such a change would have userspace visible impact/change in behavior so this patch does not attempt it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-17-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: fsl_lpuart: Fill in rs485_supportedIlpo Järvinen1-0/+6
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-16-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: atmel: Fill in rs485_supportedIlpo Järvinen1-0/+7
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-15-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: ar933x: Fill in rs485_supportedIlpo Järvinen1-0/+7
Add information on supported serial_rs485 features. In the case where RTS is lacking, RS485 cannot be enabled so provide zero rs485_supported for that case. Perhaps it would make sense to not provide rs485_config() at all in that case but such a change would have userspace visible impact/change in behavior so this patch does not attempt it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-14-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: pl011: Fill in rs485_supportedIlpo Järvinen1-0/+8
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-13-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_pci: Fill in rs485_supported for pci_fintekIlpo Järvinen1-0/+6
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-12-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_of: Use serial8250_em485_supportedIlpo Järvinen1-0/+1
8250_of uses em485, fill in rs485_supported accordingly. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-11-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_lpc18cc: Fill in rs485_supportedIlpo Järvinen1-0/+7
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-10-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_fintek: Fill in rs485_supportedIlpo Järvinen1-0/+15
Add information on supported serial_rs485 features. Differentiate based on which port is in question. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_exar: Fill in rs485_supportedIlpo Järvinen1-0/+12
Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_dwlib: Fill in rs485_supportedIlpo Järvinen1-0/+7
Add information on supported serial_rs485 features. When the driver is using em485, take advantage of serial8250_em485_supported. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_bcm2835aux: Use serial8250_em485_supportedIlpo Järvinen1-0/+1
bcm2835aux uses em485, fill in rs485_supported accordingly. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250: Create serial8250_em485_supported for em485 usersIlpo Järvinen2-0/+9
Create serial8250_em485_supported for the serial_rs485 features supported by the em485 framework. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: Add rs485_supported to uart_portIlpo Järvinen1-0/+1
Preparing to move serial_rs485 struct sanitization into serial core, each driver has to provide what fields/flags it supports. This information is pointed into by rs485_supported. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: Move serial_rs485 sanitization into separate functionIlpo Järvinen1-25/+30
Add uart_sanitize_serial_rs485() function for sanitizing serial_rs485 structure fields. No functional changes. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: Add uart_rs485_config()Ilpo Järvinen5-7/+11
A few serial drivers make a call to rs485_config() themselves (all these seem to relate to init). Convert them all to use a common helper which makes it easy to make adjustments on tasks related to it as serial_rs485 struct sanitization is going to be added. In pci_fintek_setup() (in 8250_pci.c), the rs485_config() call was made with NULL, however, it can be changed to pass uart_port's rs485 struct. No other callers should pass NULL into rs485_config() so the NULL check can now be eliminated. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220606100433.13793-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_dw: Store LSR into lsr_saved_flags in dw8250_tx_wait_empty()Ilpo Järvinen1-0/+3
Make sure LSR flags are preserved in dw8250_tx_wait_empty(). This function is called from a low-level out function and therefore cannot call serial_lsr_in() as it would lead to infinite recursion. It is borderline if the flags need to be saved here at all since this code relates to writing LCR register which usually implies no important characters should be arriving. Fixes: 914eaf935ec7 ("serial: 8250_dw: Allow TX FIFO to drain before writing to UART_LCR") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220608095431.18376-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250_dw: Use serial_lsr_in() in dw8250_handle_irq()Ilpo Järvinen1-2/+2
dw8250_handle_irq() reads LSR under a few conditions, convert both to use serial_lsr_in() in order to preserve LSR flags properly across reads. Fixes: 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") Fixes: aa63d786cea2 ("serial: 8250: dw: Add support for DMA flow controlling devices") Cc: Douglas Anderson <dianders@chromium.org> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220608095431.18376-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10serial: 8250: Adjust misleading LSR related commentIlpo Järvinen1-3/+5
serial8250_rx_chars() has max_count based character limit. If it triggers, the function returns the old LSR value (and it has never returned only flags which were not handled). Adjust the comment to match behavior and warn about which flags can be depended on. I'd have moved LSR read before LSR read and used serial_lsr_in() also here but I came across an old discussion about the topic. That discussion generated commit d22f8f10683c ("serial: 8250: Fix lost rx state") so I left the code as it is (it works as long as the callers only use a subset of the LSR flags which holds true today) and changed the comment instead. Link: https://www.spinics.net/lists/linux-serial/msg16220.html Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220608095431.18376-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.