aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
AgeCommit message (Collapse)AuthorFilesLines
2014-02-13serial: max310x: Fix build errorAlexander Shiyan1-1/+2
config: make ARCH=alpha allyesconfig All error/warnings: drivers/tty/serial/max310x.c: In function 'max310x_ioctl': >> drivers/tty/serial/max310x.c:905:7: error: 'TIOCSRS485' undeclared (first use in this function) drivers/tty/serial/max310x.c:905:7: note: each undeclared identifier is reported only once for each function it appears in >> drivers/tty/serial/max310x.c:906:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration] >> drivers/tty/serial/max310x.c:929:7: error: 'TIOCGRS485' undeclared (first use in this function) >> drivers/tty/serial/max310x.c:938:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: imx: always wake up the processes in the TX callbackHuang Shijie1-2/+1
The current code only wakes up the processes when the circle buffer has less data then the WAKEUP_CHARS. But sometimes, the circle buffer may has data more then the WAKEUP_CHARS, in such case, the processes will hang. This patch makes it always wakes up the processes in the TX callback. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13tty/serial: atmel_serial: remove dev_dbg in atmel_set_termiosNicolas Ferre1-3/+0
This fixes a driver bug which stopped the whole system (in case of serial console). This log message is not useful anyway as this information is printed elsewhere. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13Merge branch 'tty-linus' into tty-nextGreg Kroah-Hartman5-5/+29
We want the tty core fixes in here as well, because other patches depend on them. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250: Support XR17V35x fraction divisorJoe Schultz1-0/+18
The Exar XR17V35x family of UARTs have an additional fractional divisor register (DLD) which was not being used. Calculate and set this register for these devices to reduce their baud rate error. Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sirf: fix kernel panic caused by unpaired spinlockQipan Li1-1/+3
commit 8b9ade9f74f8a279 coming from Viresh Kumar "tty: serial: sirfsoc: drop uart_port->lock before calling tty_flip_buffer_push()" broke sirfsoc uart driver by knic: [ 5.129122] BUG: spinlock already unlocked on CPU#0, ip6tables/1331 [ 5.132554] lock: sirfsoc_uart_ports+0x4/0x8a0, .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 [ 5.141651] CPU: 0 PID: 1331 Comm: ip6tables Tainted: G W O 3.10.16 #3 [ 5.148866] [<c0013528>] (unwind_backtrace+0x0/0xe0) from [<c0010e70>] (show_stack+0x10/0x14) [ 5.157362] [<c0010e70>] (show_stack+0x10/0x14) from [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) [ 5.166125] [<c01a5e68>] (do_raw_spin_unlock+0x40/0xc8) from [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) [ 5.175322] [<c03ff8b4>] (_raw_spin_unlock+0x8/0x40) from [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) [ 5.185120] [<c0203fcc>] (sirfsoc_uart_pio_rx_chars+0xa4/0xc0) from [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) [ 5.195875] [<c0204fb8>] (sirfsoc_rx_tmo_process_tl+0xdc/0x1e0) from [<c0024b50>] (tasklet_action+0x8c/0xec) [ 5.205673] [<c0024b50>] (tasklet_action+0x8c/0xec) from [<c00242a8>] (__do_softirq+0xec/0x1d4) [ 5.214347] [<c00242a8>] (__do_softirq+0xec/0x1d4) from [<c0024428>] (do_softirq+0x48/0x54) [ 5.222674] [<c0024428>] (do_softirq+0x48/0x54) from [<c0024690>] (irq_exit+0x74/0xc0) [ 5.230573] [<c0024690>] (irq_exit+0x74/0xc0) from [<c000e1e8>] (handle_IRQ+0x6c/0x90) [ 5.238465] [<c000e1e8>] (handle_IRQ+0x6c/0x90) from [<c000d500>] (__irq_svc+0x40/0x70) [ 5.246446] [<c000d500>] (__irq_svc+0x40/0x70) from [<c0092e7c>] (mark_page_accessed+0xc/0x68) [ 5.255034] [<c0092e7c>] (mark_page_accessed+0xc/0x68) from [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) [ 5.264402] [<c00a2a4c>] (unmap_single_vma+0x3bc/0x550) from [<c00a3b4c>] (unmap_vmas+0x44/0x54) [ 5.273164] [<c00a3b4c>] (unmap_vmas+0x44/0x54) from [<c00a81a8>] (exit_mmap+0xc4/0x1e0) [ 5.281233] [<c00a81a8>] (exit_mmap+0xc4/0x1e0) from [<c001bb78>] (mmput+0x3c/0xdc) [ 5.288868] [<c001bb78>] (mmput+0x3c/0xdc) from [<c0021b0c>] (do_exit+0x30c/0x828) [ 5.296413] [<c0021b0c>] (do_exit+0x30c/0x828) from [<c0022dac>] (do_group_exit+0x4c/0xb0) [ 5.304653] [<c0022dac>] (do_group_exit+0x4c/0xb0) from [<c0022e20>] (__wake_up_parent+0x0/0x18) Root cause: the commit dropped uart_port->lock before calling tty_flip_buffer_push(), but in sirfsoc-uart, sirfsoc_uart_pio_rx_chars() can be called by sirfsoc_rx_tmo_process_tl(). here uart_port->lock has not been taken yet. so that caused unpaired lock/unlock. Solution: This patch is doing a quick fix for that, it adds spin_lock/unlock(&port->lock) protect to sirfsoc_uart_pio_rx_chars() in sirfsoc_rx_tmo_process_tl() to keep spin_lock/unlock in pair. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: stable <stable@vger.kernel.org> # 3.12 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250_pci: unbreak last serial ports on NetMos 9865 cardsDmitry Eremin-Solenikov1-1/+2
Aparently 9865 uses standard BAR encoding scheme (unlike 99xx cards). Current pci_netmos_9900_setup() uses wrong BAR indices for the 9865 PCI device, function 2. Using standard BAR indices makes all 6 ports work for me. Thus disable the NetMos 9900 quirk for NetMos 9865 pci device. For the reference, here is the relevant part of lspci for my device: 02:07.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at ac00 [size=8] Memory at fcfff000 (32-bit, non-prefetchable) [size=4K] Memory at fcffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.1 Serial controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller (prog-if 02 [16550]) Subsystem: Device a000:1000 Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at a800 [size=8] Memory at fcffd000 (32-bit, non-prefetchable) [size=4K] Memory at fcffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial 02:07.2 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9865 Multi-I/O Controller Subsystem: Device a000:3004 Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at a400 [size=8] I/O ports at a000 [size=8] I/O ports at 9c00 [size=8] I/O ports at 9800 [size=8] Memory at fcffb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [48] Power Management version 2 Kernel driver in use: serial Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: omap: fix rs485 probe on defered pinctrlMichael Grzeschik1-1/+4
If the gpio is not yet available we better also defer the probing in the rs485 case. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: 8250_dw: fix compilation warning when !CONFIG_PM_SLEEPMika Westerberg1-2/+2
CONFIG_PM will be set if either or both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME is set. Compiling the driver with !CONFIG_PM_SLEEP causes following compilation warnings: drivers/tty/serial/8250/8250_dw.c:404:12: warning: ‘dw8250_suspend’ defined but not used [-Wunused-function] drivers/tty/serial/8250/8250_dw.c:413:12: warning: ‘dw8250_resume’ defined but not used [-Wunused-function] Fix this by using CONFIG_PM_SLEEP instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: omap-serial: Move info message to probe functionMarkus Pargmann1-3/+3
Currently the info message about a missing wakeirq for uart is printed every time the serial driver's startup function is called. This happens multiple times and not just once. This can cause lots of extra messages at boot time, slowing things down. It is caused by commit 2a0b965cfb6e (serial: omap: Add support for optional wake-up) which was applied for v3.13-rc1. This patch moves the infomessage to the probe function to display it only once. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Add devicetree supportAlexander Shiyan1-9/+32
This patch adds devicetree support for the MAX310X serial driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Driver cleanupAlexander Shiyan1-29/+5
This patch removes some unused definitions from driver code and sort #includes alphabetically. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Add support for RS-485 modeAlexander Shiyan1-21/+56
This patch adds support for RS-485 (TIOCSRS485/TIOCGRS485) IOCTLs. As a result this patch eliminate private driver header. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Add missing mutex_destroy() on driver exitAlexander Shiyan1-2/+5
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Always use dynamic GPIO ID assignmentAlexander Shiyan1-27/+28
Always register GPIOs and use dynamic GPIO ID assignment. This is no much worth if GPIOs is not used, but helps remove private driver header and add DT support in the future. Additionally, patch adds missing uart_unregister_driver() call if probe() fails. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Migrate to CLK APIAlexander Shiyan1-31/+55
This patch removes "frequency" parameter from MAX310X platform_data and uses CLK API for getting clock. Clock type (XTAL/OSC) is determined by clk name. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Move all SPI-dependent stuff in one placeAlexander Shiyan1-32/+24
Patch move all SPI-dependent stuff in one place. This include move PM-function definitions out of CONFIG_SPI_MASTER and move regmap initialization out of common probe into CONFIG_SPI_MASTER which may help to add I2C support in the future for this driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sh_sci: remove HAVE_CLK build dependecyBaruch Siach1-1/+0
Since 93abe8e4 (clk: add non CONFIG_HAVE_CLK routines) code using clk.h like this driver needs not depend on HAVE_CLK. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Remove IRQ validationAlexander Shiyan1-6/+0
This patch removes excess IRQ checks at driver probe(). IRQ validation is already provided by request_threaded_irq(). Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Add the loopback mode supportAlexander Shiyan1-7/+18
This patch replaces loopback mode support from platform data to dynamic setup with TIOCMSET ioctl. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Remove excess port configure at startupAlexander Shiyan1-6/+0
Serial core calls set_termios() after port startup, so there are no reason to setup port twice. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Remove init() and exit() callbacksAlexander Shiyan1-7/+0
These callbacks were previously used for the IC power initialization. If this initialization will be needed in the future, it should be implemented with the regulator API. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Setup baud rate generator more preciselyAlexander Shiyan1-11/+19
This patch provide more precisely setup of baud rate generator. If the result of division has a remainder, we use the multiplier for the base frequency. Additionally, we report result baud rate back to serial core. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: max310x: Allow driver to be compiled as moduleAlexander Shiyan1-1/+1
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sh-sci: Restrict non-COMPILE_TEST compilationLaurent Pinchart1-1/+2
Hardware supported by the driver is only found on SUPERH or ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST compilation to them. Cc: linux-serial@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: pch_uart: Fix build warning when CONFIG_DEBUG_FS=nJingoo Han1-0/+2
Add CONFIG_DEBUG_FS to 'char name' in order to fix the following build warning, because 'char name' is used only when CONFIG_DEBUG_FS is enabled. drivers/tty/serial/pch_uart.c:1765:7: warning: unused variable 'name' [-Wunused-variable] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: sh-sci: Fix cast warningJingoo Han1-1/+1
Fix the following compile warning about cast to pointer from integer of different size. drivers/tty/serial/sh-sci.c:2021:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13serial: omap-serial: Move info message to probe functionMarkus Pargmann1-3/+3
Currently the info message about a missing wakeirq for uart is printed every time the serial driver's startup function is called. This happens multiple times and not just once. This patch moves the infomessage to the probe function to display it only once. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-12msm_serial: Add support for poll_{get,put}_char()Stephen Boyd2-3/+146
Implement the polling functionality for the MSM serial driver. This allows us to use KGDB on this hardware. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06tty: serial: msm: Enable building msm_serial for ARCH_QCOMKumar Gala1-1/+1
We've split Qualcomm MSM support into legacy and multiplatform. So add the ability to build the serial driver on the newer ARCH_QCOM multiplatform. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-01-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-6/+3
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-30Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds1-11/+79
Pull more powerpc bits from Ben Herrenschmidt: "Here are a few more powerpc bits for this merge window. The bulk is made of two pull requests from Scott and Anatolij that I had missed previously (they arrived while I was away). Since both their branches are in -next independently, and the content has been around for a little while, they can still go in. The rest is mostly bug and regression fixes, a small series of cleanups to our pseries cpuidle code (including moving it to the right place), and one new cpuidle bakend for the powernv platform. I also wired up the new sched_attr syscalls" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits) powerpc: Wire up sched_setattr and sched_getattr syscalls powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var powerpc: Make sure "cache" directory is removed when offlining cpu powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform. powerpc/pseries/cpuidle: smt-snooze-delay cleanup. powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro. powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module. powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation. powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle. powerpc: Fix 32-bit frames for signals delivered when transactional powerpc/iommu: Fix initialisation of DART iommu table powerpc/numa: Fix decimal permissions powerpc/mm: Fix compile error of pgtable-ppc64.h powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations clk: corenet: Adds the clock binding powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E powerpc/512x: dts: add MPC5125 clock specs powerpc/512x: clk: support MPC5121/5123/5125 SoC variants powerpc/512x: clk: enforce even SDHC divider values ...
2014-01-29Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt1-11/+79
<< Switch mpc512x to the common clock framework and adapt mpc512x drivers to use the new clock driver. Old PPC_CLOCK code is removed entirely since there are no users any more. >>
2014-01-28Merge tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds3-6/+16
Pull serial fixes from Greg KH: "Here are tiny and assorted serial driver fixes that have been in a branch in my tree for a while and somehow did not get properly merged into my big TTY / Serial pull request for 3.14-rc1. Sorry about that. All have been in linux-next for a while with no issues" * tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: xuartps: Properly guard sysrq specific code serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip serial: icom: dereference after free in load_code() serial: 8250_dw: add new ACPI IDs tty: serial: pch: don't crash if DMA enabled but not loaded serial: samsung: move clock deactivation below uart registration
2014-01-23Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-51/+138
Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. The largest part of this is a conversion of device registration for some renesas shmobile/sh devices over to use resources. This has required coordination with the corresponding arch/sh changes, and we've agreed to merge the arch/sh changes through our tree. Added in this branch is support for Trusted Foundations secure firmware, which is what is used on many of the commercial Nvidia Tegra products that are in the market, including the Nvidia Shield. The code is local to arch/arm at this time since it's uncertain whether it will be shared with arm64 longer-term, if needed we will refactor later. A couple of new RTC drivers used on ARM boards, merged through our tree on request by the RTC maintainer. ... plus a bunch of smaller updates across the board, gpio conversions for davinci, etc" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) watchdog: davinci: rename platform driver to davinci-wdt tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field ...
2014-01-23Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-190/+170
Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2014-01-23tty: serial: bcm63xx_uart: use linux/serial_bcm63xx.hFlorian Fainelli1-2/+1
Now that the UART block defines have been moved to a separate file, include that one and do not longer rely on the MIPS-specific bcm63xx_regs.h header file. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6204/
2014-01-23tty: serial: bcm63xx_uart: drop bcm_{readl,writel} macrosFlorian Fainelli1-3/+2
bcm_{readl,writel} macros expand to __raw_{readl,writel}, use these directly such that we do not rely on the platform to provide these for us. As a result, we no longer use bcm63xx_io.h, so remove that inclusion too. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6201/
2014-01-23tty: serial: bcm63xx_uart: remove unused inclusionFlorian Fainelli1-1/+0
bcm63xx_irqs.h is included but we are not using anything from it, drop that include. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6205/
2014-01-22Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-22Merge branch 'fixes' into tty-nextGreg Kroah-Hartman3-6/+16
This was a "forgotten" branch of tty fixes that somehow didn't make it into my "main" branches, my fault. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-13tty/serial: at91: disable uart timer at start of shutdownMarek Roszko1-12/+10
The uart timer will schedule a tasklet when it fires. It is possible that it can fire inside _shutdown before it is killed in the dma and pdc cleanup routines. This causes a tasklet that exists after the port is shutdown, so when the kernel finally executes it, it panics as the tty port is NULL. This is a somewhat rare condition but its possible if a program keeps on opening/closing the port. It has been observed in particular with systemd boot messages that were causing a kernel panic because of this behavior. Moving the timer deletion to the beginning of the function stops a tasklet from being scheduled unexpectedly. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Cc: stable <stable@vger.kernel.org> # v3.12 [nicolas.ferre@atmel.com: modify commit message, call setup_timer() in any case] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-12serial: mpc512x: setup the PSC FIFO clock as wellGerhard Sittig1-6/+44
prepare and enable the FIFO clock upon PSC FIFO initialization, check for and propagage errors when enabling the PSC FIFO clock, disable and unprepare the FIFO clock upon PSC FIFO uninitialization devm_{get,put}_clk() doesn't apply here, as the SoC provides a single FIFO component which is shared among several PSC components, thus the FIFO isn't associated with a device (while the PSCs are) provide a fallback clock lookup approach in case the OF based clock lookup for the PSC FIFO fails, this allows for successful operation in the presence of an outdated device tree which lacks clock specs Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-01-12serial: mpc512x: adjust for OF based clock lookupGerhard Sittig1-5/+35
after device tree based clock lookup became available, the peripheral driver need no longer construct clock names which include the PSC index, remove the "psc%d_mclk" template and unconditionally use 'mclk' acquire and release the "ipg" clock item for register access as well Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: linux-serial@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2014-01-09Merge branch 'qcom/drivers' into next/driversOlof Johansson1-1/+1
* qcom/drivers: tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-09tty: serial: Limit msm_serial_hs driver to platforms that use itStephen Boyd1-1/+1
The msm_serial_hs driver uses mach specific dma APIs. This is not compatible with the multi-platform ARM effort. Let's only compile this driver on MSM devices that are prepared to support it; allowing the DT based MSM devices to enter the multi-platform ARM build. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-07serial: 8250: enable UART_BUG_NOMSR for TegraStephen Warren1-0/+4
Tegra chips have 4 or 5 identical UART modules embedded. UARTs C..E have their MODEM-control signals tied off to a static state. However UARTs A and B can optionally route those signals to/from package pins, depending on the exact pinmux configuration. When these signals are not routed to package pins, false interrupts may trigger either temporarily, or permanently, all while not showing up in the IIR; it will read as NO_INT. This will eventually lead to the UART IRQ being disabled due to unhandled interrupts. When this happens, the kernel may print e.g.: irq 68: nobody cared (try booting with the "irqpoll" option) In order to prevent this, enable UART_BUG_NOMSR. This prevents UART_IER_MSI from being enabled, which prevents the false interrupts from triggering. In practice, this is not needed under any of the following conditions: * On Tegra chips after Tegra30, since the HW bug has apparently been fixed. * On UARTs C..E since their MODEM control signals are tied to the correct static state which doesn't trigger the issue. * On UARTs A..B if the MODEM control signals are routed out to package pins, since they will then carry valid signals. However, we ignore these exceptions for now, since they are only relevant if a board actually hooks up more than a 4-wire UART, and no currently supported board does this. If we ever support a board that does, we can refine the algorithm that enables UART_BUG_NOMSR to take those exceptions into account, and/or read a flag from DT/... that indicates that the board has hooked up and pinmux'd more than a 4-wire UART. Reported-by: Olof Johansson <olof@lixom.net> # autotester Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty/serial: at91: reset rx_ring when port is shutdownMark Deneen1-0/+6
When using RX DMA, the driver won't pass any data to the uart layer until the buffer is flipped. When the port is shutdown, the dma buffers are unmapped, but the head and tail of the ring buffer are not reseted. Since the serial console will keep the port open, this will only present itself when the uart is not shared. To reproduce the issue, with an unpatched driver, run a getty on /dev/ttyS0 with no serial console and exit. Getty will exit, and when the new one returns you will be unable to log in. If you hold down a key long enough to fill the DMA buffer and flip it, you can then log in. Signed-off-by: Mark Deneen <mdeneen@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> [nicolas.ferre@atmel.com: adapt to mainline kernel, handle !DMA case] Cc: <stable@vger.kernel.org> # v3.12 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty/serial: at91: fix race condition in atmel_serial_removeMarek Roszko1-1/+2
The _remove callback could be called when a tasklet is scheduled. tasklet_kill was called inside the function in order to free up any scheduled tasklets. However it was called after uart_remove_one_port which destroys tty references needed in the port for atmel_tasklet_func. Simply putting the tasklet_kill at the start of the function will prevent this conflict. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> Cc: <stable@vger.kernel.org> # v3.12 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty/serial: at91: Handle shutdown more safelyMarek Roszko1-7/+13
Interrupts were being cleaned up late in the shutdown handler, it is possible that an interrupt can occur and schedule a tasklet that runs after the port is cleaned up. There is a null dereference due to this race condition with the following stacktrace: [<c02092b0>] (atmel_tasklet_func+0x514/0x814) from [<c001fd34>] (tasklet_action+0x70/0xa8) [<c001fd34>] (tasklet_action+0x70/0xa8) from [<c001f60c>] (__do_softirq+0x90/0x144) [<c001f60c>] (__do_softirq+0x90/0x144) from [<c001fa18>] (irq_exit+0x40/0x4c) [<c001fa18>] (irq_exit+0x40/0x4c) from [<c000e298>] (handle_IRQ+0x64/0x84) [<c000e298>] (handle_IRQ+0x64/0x84) from [<c000d6c0>] (__irq_svc+0x40/0x50) [<c000d6c0>] (__irq_svc+0x40/0x50) from [<c0208060>] (atmel_rx_dma_release+0x88/0xb8) [<c0208060>] (atmel_rx_dma_release+0x88/0xb8) from [<c0209740>] (atmel_shutdown+0x104/0x160) [<c0209740>] (atmel_shutdown+0x104/0x160) from [<c0205e8c>] (uart_port_shutdown+0x2c/0x38) Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> Cc: <stable@vger.kernel.org> # v3.12 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.