aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
AgeCommit message (Collapse)AuthorFilesLines
2012-05-14Merge branches 'spear/clock' and 'imx/clock' into next/clockArnd Bergmann3-0/+24
Updated to resolve dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'imx/pinctrl' into imx/clockArnd Bergmann3-0/+24
Conflicts: drivers/mmc/host/sdhci-esdhc-imx.c drivers/net/ethernet/freescale/fec.c drivers/spi/spi-imx.c drivers/tty/serial/imx.c This resolves dependencies between the pinctrl and clock changes in imx. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12serial: mxs-auart: adopt pinctrl supportShawn Guo1-0/+8
Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-12serial: amba-pl011: adopt pinctrl supportShawn Guo1-0/+8
Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-11Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/clockArnd Bergmann1-3/+3
Shawn Guo <shawn.guo@linaro.org> writes: mxs common clk porting for v3.5. It depends on the following two branches. [1] git://git.linaro.org/people/mturquette/linux.git clk-next [2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev As the mxs device tree conversion will constantly touch clock files, to save the conflicts, the updated mxs/dt branch coming later will based on this pull-request. * 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: remove now unused timer_clk argument from mxs_timer_init ARM: mxs: remove old clock support ARM: mxs: switch to common clk framework ARM: mxs: change the lookup name for fec phy clock ARM: mxs: request clock for timer clk: mxs: add clock support for imx28 clk: mxs: add clock support for imx23 clk: mxs: add mxs specific clocks Includes an update to Linux 3.4-rc6 Conflicts: drivers/clk/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11Merge branch 'clps711x/cleanup' into next/cleanupArnd Bergmann1-1/+0
A single patch from Alexander Shiyan <shc_work@mail.ru>: * clps711x/cleanup: ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11ARM: clps711x: Using a single definition for the PHYS and VIRT registers offsetAlexander Shiyan1-1/+0
Using a single definition for the physical and virtual address register for all variants boards clps711x. This patch also includes the use of a single function clps_read/write in some units. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11tty: serial: imx: adopt pinctrl supportShawn Guo1-0/+8
Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-05-10Merge branch 'sh/rsk-updates' into sh-latestPaul Mundt3-10/+14
Conflicts: arch/sh/Kconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-09serial8250-em: Add DT supportMagnus Damm1-0/+7
Update the 8250_em driver to support DT. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09serial8250-em: clk_get() IS_ERR() error handling fixMagnus Damm1-1/+2
Update the 8250_em driver to correctly handle the case where no clock is associated with the device. The return value of clk_get() needs to be checked with IS_ERR() to avoid NULL pointer referencing. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09serial_core: Update buffer overrun statistics.Corbin Atkinson1-2/+4
Currently, serial drivers don't report buffer overruns. When a buffer overrun occurs, tty_insert_flip_char returns 0, and no attempt is made to insert that same character again (i.e. it is lost). This patch reports buffer overruns via the buf_overrun field in the port's icount structure. Signed-off-by: Corbin Atkinson <corbin.atkinson@ni.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-08cris: fix missing tty arg in wait_event_interruptible_tty callPaul Gortmaker1-2/+2
Commit d29f3ef39be4eec0362b985305fc526d9be318cf "tty_lock: Localise the lock" added a tty arg to wait_event_interruptible_tty() but it missed this arch specific instance for cris, causing a compile failure. Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04tty_lock: Localise the lockAlan Cox1-2/+2
In each remaining case the tty_lock is associated with a specific tty. This means we can now lock on a per tty basis. We do need tty_lock_pair() for the pty case. Uglier but still a step in the right direction. [fixed up calls in 3 missing drivers - gregkh] Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04serial8250-em: Emma Mobile UART driver V2Magnus Damm3-0/+187
This is V2 of the Emma Mobile 8250 platform driver. The hardware itself has according to the data sheet up to 64 byte FIFOs but at this point we only make use of the 16550 compatible mode. To support this piece of hardware the common UART registers need to be remapped, and the access size differences need to be handled. The DLL and DLM registers can due to offset collision not be remapped easily, and because of that this driver makes use of ->dl_read() and ->dl_write() callbacks. This in turn requires a registration function that takes 8250-specific paramenters. Future potential enhancements include DT support, early platform driver console and fine grained PM. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04Add missing call to uart_update_timeout()Lothar Waßmann1-0/+2
This patch fixes a problem reported here: http://article.gmane.org/gmane.linux.ports.arm.kernel/155242/match=auart Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02serial8250: Introduce serial8250_register_8250_port()Magnus Damm1-31/+58
Introduce yet another 8250 registration function. This time it is serial8250_register_8250_port() and it allows us to register 8250 hardware instances using struct uart_8250_port. The new function makes it possible to register 8250 hardware that makes use of 8250 specific callbacks such as ->dl_read() and ->dl_write(). Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02serial8250: Clean up default map and dl codeMagnus Damm1-26/+12
Get rid of unused functions and macros now when Alchemy and RM9K are converted over to callbacks. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02serial8250: Use dl_read()/dl_write() on RM9KMagnus Damm1-33/+29
Convert the 8250 RM9K support code to make use of the new dl_read()/dl_write() callbacks. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02serial8250: Use dl_read()/dl_write() on AlchemyMagnus Damm1-41/+26
Convert the 8250 Alchemy support code to make use of the new dl_read()/dl_write() callbacks. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02serial8250: Add dl_read()/dl_write() callbacksMagnus Damm2-53/+78
Convert serial_dl_read() and serial_dl_write() from macro to 8250 specific callbacks. This change makes it easier to support 8250 hardware with non-standard DLL and DLM register configurations such as Alchemy, RM9K and upcoming Emma Mobile UART hardware. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-018250.c: less than 2400 baud fix.Christian Melki1-4/+5
We noticed that we were loosing data at speed less than 2400 baud. It turned out our (TI16750 compatible) uart with 64 byte outgoing fifo was truncated to 16 byte (bit 5 sets fifo len) when modifying the fcr reg. The input code still fills the buffer with 64 bytes if I remember correctly and thus data is lost. Our fix was to remove whiping of the fcr content and just add the TRIGGER_1 which we want for latency. I can't see why this would not work on less than 2400 always, for all uarts ... Otherwise one would have to make sure the filling of the fifo re-checks the current state of available fifo size (urrk). Signed-off-by: Christian Melki <christian.melki@ericsson.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-298250_pci: fix pch uart matchingArnaud Patard1-0/+18
The rules used to make 8250_pci "ignore" the PCH uarts are lacking pci subids entries, preventing it to match and thus is breaking serial port support for theses systems. This has been tested on a nanoETXexpress-TT, which has a specifici uart clock. Tested-by: Erwan Velu <Erwan.Velu@zodiacaerospace.com> [stable@: please apply to 3.0-stable, 3.2-stable and 3.3-stable] Cc: stable <stable@vger.kernel.org> Signed-off-by: Arnaud Patard <apatard@hupstream.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30tty/serial/pmac_zilog: Fix "nobody cared" IRQ messageLarry Finger1-3/+3
Following commit a79dd5a titled "tty/serial/pmac_zilog: Fix suspend & resume", my Powerbook G4 Titanium showed the following stack dump: [ 36.878225] irq 23: nobody cared (try booting with the "irqpoll" option) [ 36.878251] Call Trace: [ 36.878291] [dfff3f00] [c000984c] show_stack+0x7c/0x194 (unreliable) [ 36.878322] [dfff3f40] [c00a6868] __report_bad_irq+0x44/0xf4 [ 36.878339] [dfff3f60] [c00a6b04] note_interrupt+0x1ec/0x2ac [ 36.878356] [dfff3f80] [c00a48d0] handle_irq_event_percpu+0x250/0x2b8 [ 36.878372] [dfff3fd0] [c00a496c] handle_irq_event+0x34/0x54 [ 36.878389] [dfff3fe0] [c00a753c] handle_fasteoi_irq+0xb4/0x124 [ 36.878412] [dfff3ff0] [c000f5bc] call_handle_irq+0x18/0x28 [ 36.878428] [deef1f10] [c000719c] do_IRQ+0x114/0x1cc [ 36.878446] [deef1f40] [c0015868] ret_from_except+0x0/0x1c [ 36.878484] --- Exception: 501 at 0xf497610 [ 36.878489] LR = 0xfdc3dd0 [ 36.878497] handlers: [ 36.878510] [<c02b7424>] pmz_interrupt [ 36.878520] Disabling IRQ #23 From an E-mail exchange about this problem, Andreas Schwab noticed a typo that resulted in the wrong condition being tested. The patch also corrects 2 typos that incorrectly report why an error branch is being taken. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-04-25serial i.MX: do not depend on grouped clocksSascha Hauer1-15/+23
the current i.MX clock support groups together unrelated clocks to a single clock which is then used by the driver. This can't be accomplished with the generic clock framework so we instead request the individual clocks in the driver. For i.MX there are generally three different clocks: ipg: bus clock (needed to access registers) ahb: dma relevant clock, sometimes referred to as hclk in the datasheet per: bit clock, pixel clock This patch changes the driver to request the individual clocks. Currently all clk_get will get the same clock until the SoCs are converted to the generic clock framework Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-23Merge 3.4-rc4 into tty-nextGreg Kroah-Hartman10-589/+361
This resolves the merge problem with: drivers/tty/serial/pch_uart.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19Merge branches 'sh/st-integration' and 'sh/stackprotector' into sh-latestPaul Mundt9-51/+47
2012-04-18serial/8250_pci: fix suspend/resume vs init/exit quirksDan Williams1-0/+6
Commit e86ff4a6 "serial/8250_pci: init-quirk msi support for kt serial controller" introduced a regression in suspend/resume by causing msi's to be enabled twice without an intervening disable. 00:16.3 Serial controller: Intel Corporation Patsburg KT Controller (rev 05) (prog-if 02 [16550]) Subsystem: Intel Corporation Device 7270 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 72 I/O ports at 4080 [size=8] Memory at d1c30000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: serial [ 365.250523] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:16.3/msi_irqs' [ 365.250525] Modules linked in: nls_utf8 ipv6 uinput sg iTCO_wdt iTCO_vendor_support ioatdma dca i2c_i801 i2c_core wmi sd_mod ahci libahci isci libsas libata scsi_transport_sas [last unloaded: scsi_wait_scan] [ 365.250540] Pid: 9030, comm: kworker/u:1 Tainted: G W 3.3.0-isci-3.0.213+ #1 [ 365.250542] Call Trace: [ 365.250545] [<ffffffff8115e955>] ? sysfs_add_one+0x99/0xad [ 365.250548] [<ffffffff8102db8b>] warn_slowpath_common+0x85/0x9e [ 365.250551] [<ffffffff8102dc96>] warn_slowpath_fmt+0x6e/0x70 [ 365.250555] [<ffffffff8115e8fa>] ? sysfs_add_one+0x3e/0xad [ 365.250558] [<ffffffff8115e8b4>] ? sysfs_pathname+0x3c/0x44 [ 365.250561] [<ffffffff8115e8b4>] ? sysfs_pathname+0x3c/0x44 [ 365.250564] [<ffffffff8115e8b4>] ? sysfs_pathname+0x3c/0x44 [ 365.250567] [<ffffffff8115e8b4>] ? sysfs_pathname+0x3c/0x44 [ 365.250570] [<ffffffff8115e955>] sysfs_add_one+0x99/0xad [ 365.250573] [<ffffffff8115f031>] create_dir+0x72/0xa5 [ 365.250577] [<ffffffff8115f194>] sysfs_create_dir+0xa2/0xbe [ 365.250581] [<ffffffff81262463>] kobject_add_internal+0x126/0x1f8 [ 365.250585] [<ffffffff8126255b>] kset_register+0x26/0x3f [ 365.250588] [<ffffffff8126275a>] kset_create_and_add+0x62/0x7c [ 365.250592] [<ffffffff81293619>] populate_msi_sysfs+0x34/0x103 [ 365.250595] [<ffffffff81293e1c>] pci_enable_msi_block+0x1b3/0x216 [ 365.250599] [<ffffffff81303f7c>] try_enable_msi+0x13/0x17 [ 365.250603] [<ffffffff81303fb3>] pciserial_resume_ports+0x21/0x42 [ 365.250607] [<ffffffff81304041>] pciserial_resume_one+0x50/0x57 [ 365.250610] [<ffffffff81283e1a>] pci_legacy_resume+0x38/0x47 [ 365.250613] [<ffffffff81283e7d>] pci_pm_restore+0x54/0x87 [ 365.250616] [<ffffffff81283e29>] ? pci_legacy_resume+0x47/0x47 [ 365.250619] [<ffffffff8131e9e8>] dpm_run_callback+0x48/0x7b [ 365.250623] [<ffffffff8131f39a>] device_resume+0x342/0x394 [ 365.250626] [<ffffffff8131f5b7>] async_resume+0x21/0x49 That patch has since been reverted, but by inspection it seems that pciserial_suspend_ports() should be invoking .exit() quirks to release resources acquired during .init(). Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18serial/8250_pci: Clear FIFOs for Intel ME Serial Over Lan device on BISudhakar Mamillapalli3-0/+51
When using Serial Over Lan (SOL) over the virtual serial port in a Intel management engine (ME) device, on device reset the serial FIFOs need to be cleared to keep the FIFO indexes in-sync between the host and the engine. On a reset the serial device assertes BI, so using that as a cue FIFOs are cleared. So for this purpose a new handle_break callback has been added. One other problem is that the serial registers might temporarily go to 0 on reset of this device. So instead of using the IER register read, if 0 returned use the ier value in uart_8250_port. This is hidden under a custom serial_in. Cc: Nhan H Mai <nhan.h.mai@intel.com> Signed-off-by: Sudhakar Mamillapalli <sudhakar@fb.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18Merge 3.4-rc3 into tty-nextGreg Kroah-Hartman9-51/+47
This allows us to pick up some changes needed for other serial patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18pch_uart: Fix dma channel unallocated issueTomoya MORINAGA1-1/+3
This driver anticipates pch_uart_verify_port() is not called during installation. However, actually pch_uart_verify_port() is called during installation. As a result, memory access violation occurs like below. 0. initial value: use_dma=0 1. starup() - dma channel is not allocated because use_dma=0 2. pch_uart_verify_port() - Set use_dma=1 3. UART processing acts DMA mode because use_dma=1 - memory access violation occurs! This patch fixes the issue. Solution: Whenever pch_uart_verify_port() is called and then dma channel is not allocated, the channel should be allocated. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18ARM: clps711x: serial driver hungs are a result of call disable_irq within ISRAlexander Shiyan1-6/+8
Since 2.6.30-rc1 clps711x serial driver hungs system. This is a result of call disable_irq from ISR. synchronize_irq waits for end of interrupt and goes to infinite loop. This patch fix this problem. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18tegra, serial8250: add ->handle_break() uart_port opDan Williams2-31/+29
The "KT" serial port has another use case for a "received break" quirk, so before adding another special case to the 8250 core take this opportunity to push such quirks out of the core and into a uart_port op. Stephen says: "If the callback function is to no longer live in 8250.c itself, arch/arm/mach-tegra/devices.c isn't logically a good place to put it, and that file will be going away once we get rid of all the board files and move solely to device tree." ...so since 8250_pci.c houses all the quirks for pci serial devices this quirk is similarly housed in of_serial.c. Once the open firmware conversion completes the infrastructure details (include/linux/of_serial.h, and the export) can all be removed to make this self contained to of_serial.c. Cc: Nhan H Mai <nhan.h.mai@intel.com> Cc: Colin Cross <ccross@android.com> Cc: Olof Johansson <olof@lixom.net> [stephen: kill CONFIG_SERIAL_TEGRA in favor just using CONFIG_ARCH_TEGRA] Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sudhakar Mamillapalli <sudhakar@fb.com> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18OMAP2+: UART: Remove cpu checks for populating errata flagsGovindraj.R1-1/+73
Currently the errata is populated based on cpu checks this can be removed and replaced with module version check of uart ip block. MVR reg is provided within the uart reg map use the same to populate the errata and thus now errata population and handling can be managed within the driver itself. Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18serial: pl011: implement workaround for CTS clear event issueRajanikanth H.V1-91/+18
Problem Observed: - interrupt status is set by rising or falling edge on CTS line - interrupt status is cleared on a .0. to .1. transition of the interrupt-clear register bit 1. - interrupt-clear register is reset by hardware once the interrupt status is .0.. Remark: It seems not possible to read this register back by the CPU though, but internally this register exists. - when simultaneous set and reset event on the interrupt status happens, then the set-event has priority and the status remains .1.. As a result the interrupt-clear register is not reset to .0., and no new .0. to .1. transition can be detected on it when writing a .1. to it. This implies race condition, the clear must be performed at least one UARTCLK the riding edge of CTS RIS interrupt. Fix: Instead of resetting UART as done in commit c16d51a32bbb61ac8fd96f78b5ce2fccfe0fb4c3 "amba pl011: workaround for uart registers lockup" do the following: write .0. and then .1. to the interrupt-clear register to make sure that this transition is detected. According to the datasheet writing a .0. does not have any effect, but actually it allows to reset the internal interrupt-clear register. Take into account: The .0. needs to last at least for one clk_uart clock period (~ 38 MHz, 26.08ns) This way we can do away with the tasklet and keep only a tiny fix triggered by the variant flag introduced in this patch. Signed-off-by: Guillaume Jaunet <guillaume.jaunet@stericsson.com> Signed-off-by: Christophe Arnal <christophe.arnal@stericsson.com> Signed-off-by: Matthias Locher <Matthias.Locher@stericsson.com> Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-12Merge tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds9-51/+47
Pull tty and serial fixes from Greg KH: "Here are some tty and serial fixes for 3.4-rc2. Most important here is the pl011 fix, which has been reported by about 100 different people, which means more people use it than I expected :) There are also some 8250 driver reverts due to some problems reported by them. And other minor fixes as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pch_uart: Add Kontron COMe-mTT10 uart clock quirk pch_uart: Fix MSI setting issue serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller" Revert "serial/8250_pci: init-quirk msi support for kt serial controller" tty/serial/omap: console can only be built-in serial: samsung: fix omission initialize ulcon in reset port fn() printk(): add KERN_CONT where needed in hpet and vt code tty/serial: atmel_serial: fix RS485 half-duplex problem tty: serial: altera_uart: Check for NULL platform_data in probe. isdn/gigaset: use gig_dbg() for debugging output omap-serial: Fix the error handling in the omap_serial probe serial: PL011: move interrupt clearing
2012-04-12serial: sh-sci: Update break_ctl handling for all SCSPTR-capable regtypes.Shimoda, Yoshihiro1-18/+18
This updates the earlier break_ctl support regardless of regtype so long as the requisite SCSPTR exists. This is the same approach used by sci_init_pins() for providing a generic solution now that we're able to detect register capabilities on a per-port basis. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-04-09pch_uart: Fix duplicate memory release issueTomoya MORINAGA1-4/+7
Add initialize variable to prevent duplicate free memory. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09pch_uart: Fix return value issueTomoya MORINAGA1-0/+5
Currently, occurring line status interrupt, returned value is not set in interrupt handler function. As a result, 0 can be returned. This patch adds setting returned value. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09pch_uart: delete unused data structureTomoya MORINAGA1-6/+0
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09pch_uart: Support modem status interruptTomoya MORINAGA1-2/+13
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09pch_uart: change type to %d to %02xTomoya MORINAGA1-1/+1
%02x format is easier to understand better than %d. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09pch_uart: change type to u8Tomoya MORINAGA1-8/+4
Target uart register access size is 8bit. However, 32bit is used at 2 points. This patch modifies type "unsigned int" to "unsigned char". Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09pch_uart: Delete unused structure memberTomoya MORINAGA1-2/+0
Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09TTY: 68328serial, use tty_port_block_til_readyJiri Slaby1-91/+5
Since the code is identical, use the tty_port_block_til_ready helper instead of re-implemented variant. The code does not perform rtsdts handling, hence we do not need to provide tty port hooks for them. The default ones will be used instead. The only necessary thing is to provide tty_port_operations. It is empty, but has to be there... Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09TTY: 68328serial, use tty from tty_portJiri Slaby1-6/+6
And refcount that properly. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09TTY: 68328serial, propagate ttyJiri Slaby1-26/+27
We need tty at some places, but info->tty might be NULL at those. Let us propagate tty from callers where we know we have a valid tty. This will make a switch to tty refcounting simpler. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09TTY: 68328serial, use flags from tty_portJiri Slaby1-21/+18
Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09TTY: 68328serial, use close_delay/closing_wait from tty_portJiri Slaby1-15/+11
Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09TTY: 68328serial, use open/close_wait from tty_portJiri Slaby1-10/+6
Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.