aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-16serial: fsl_linflexuart: Be consistent with the nameStefan-Gabriel Mirea2-6/+6
For consistency reasons, spell the controller name as "LINFlexD" in comments and documentation. Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Link: https://lore.kernel.org/r/1571230107-8493-4-git-send-email-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-16Revert "serial: core: Use cons->index for preferred console registration"Michal Simek1-2/+1
This reverts commit 91daae03188e0dd1da3c1b599df4ce7539d5a69f. The origin patch is causing an issue on r8a7791/koelsch and r8a7795/salvator-xs platforms where cons->index is not initialized to expected value. It is safer to revert this patch for now till it is clear why this is happening. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/59f51af6bb03fce823663764d17ad0291aa01ab2.1571222199.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-158250-men-mcb: fix error checking when get_num_ports returns -ENODEVColin Ian King1-4/+4
The current checking for failure on the number of ports fails when -ENODEV is returned from the call to get_num_ports. Fix this by making num_ports and loop counter i signed rather than unsigned ints. Also add check for num_ports being less than zero to check for -ve error returns. Addresses-Coverity: ("Unsigned compared against 0") Fixes: e2fea54e4592 ("8250-men-mcb: add support for 16z025 and 16z057") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Michael Moese <mmoese@suse.de> Link: https://lore.kernel.org/r/20191013220016.9369-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-15serial: 8250_exar: Move Exar pieces to custom ->startup()Andy Shevchenko2-14/+19
There is a one more step to consolidate Exar bits under 8250_exar umbrella. This time we introduce a custom ->startup() callback where the Exar specific settings are applied. Cc: Robert Middleton <robert.middleton@rm5248.com> Cc: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20191011115610.81507-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov1-5/+3
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-10-14Merge 5.4-rc3 into tty-nextGreg Kroah-Hartman13-18/+48
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-11hvc: dcc: Add earlycon supportMichal Simek1-0/+28
Add DCC earlycon support for early printks. The patch is useful for SoC bringup where HW serial console is broken. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/41e2920a6348e65b2e986b0e65b66531e87cd756.1570543923.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10serdev: Add ACPI devices by ResourceSource fieldMaximilian Luz1-12/+99
When registering a serdev controller, ACPI needs to be checked for devices attached to it. Currently, all immediate children of the ACPI node of the controller are assumed to be UART client devices for this controller. Furthermore, these devices are not searched elsewhere. This is incorrect: Similar to SPI and I2C devices, the UART client device definition (via UARTSerialBusV2) can reside anywhere in the ACPI namespace as resource definition inside the _CRS method and points to the controller via its ResourceSource field. This field may either contain a fully qualified or relative path, indicating the controller device. To address this, we need to walk over the whole ACPI namespace, looking at each resource definition, and match the client device to the controller via this field. This patch is based on the existing acpi serial bus implementations in drivers/i2c/i2c-core-acpi.c and drivers/spi/spi.c, specifically commit 4c3c59544f33e97cf8557f27e05a9904ead16363 ("spi/acpi: enumerate all SPI slaves in the namespace"). Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190924162226.1493407-1-luzmaximilian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10serial: sirf: make register info staticBen Dooks1-2/+3
The sirfsoc_usp and sirfsoc_uart objects are not used outside of the drivers/tty/serial/sirfsoc_uart.o so make them static. Fixes following sparse warnings: drivers/tty/serial/sirfsoc_uart.h:123:30: warning: symbol 'sirfsoc_usp' was not declared. Should it be static? drivers/tty/serial/sirfsoc_uart.h:189:30: warning: symbol 'sirfsoc_uart' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191009135356.11180-1-ben.dooks@codethink.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10tty: serial: qcom_geni_serial: Wakeup over UART RXAkash Asthana1-1/+43
Add system wakeup capability over UART RX line for wakeup capable UART. When system is suspended, RX line act as an interrupt to wakeup system for any communication requests from peer. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/1570700803-17566-1-git-send-email-akashast@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10tty: serial: qcom_geni_serial: IRQ cleanupAkash Asthana1-10/+14
Move ISR registration from startup to probe function to avoid registering it everytime when the port open is called for driver. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/1570700763-17319-1-git-send-email-akashast@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10tty: serial: imx: Use platform_get_irq_optional() for optional IRQsAnson Huang1-2/+2
All i.MX SoCs except i.MX1 have ONLY one necessary IRQ, use platform_get_irq_optional() to get second/third IRQ which are optional to avoid below error message during probe: [ 0.726219] imx-uart 30860000.serial: IRQ index 1 not found [ 0.731329] imx-uart 30860000.serial: IRQ index 2 not found Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Link: https://lore.kernel.org/r/1570614559-11900-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-10serial: fix kernel-doc warning in commentsRandy Dunlap1-0/+2
Fix Sphinx warning in serial_core.c: ../drivers/tty/serial/serial_core.c:1969: WARNING: Definition list ends without a blank line; unexpected unindent. Fixes: 73abaf87f01b ("serial: earlycon: Refactor parse_options into serial core") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/e989641c-224a-1090-e596-e7cc800bed44@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-09locking/lockdep: Remove unused @nested argument from lock_release()Qian Cai1-4/+4
Since the following commit: b4adfe8e05f1 ("locking/lockdep: Remove unused argument in __lock_release") @nested is no longer used in lock_release(), so remove it from all lock_release() calls and friends. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: alexander.levin@microsoft.com Cc: daniel@iogearbox.net Cc: davem@davemloft.net Cc: dri-devel@lists.freedesktop.org Cc: duyuyang@gmail.com Cc: gregkh@linuxfoundation.org Cc: hannes@cmpxchg.org Cc: intel-gfx@lists.freedesktop.org Cc: jack@suse.com Cc: jlbec@evilplan.or Cc: joonas.lahtinen@linux.intel.com Cc: joseph.qi@linux.alibaba.com Cc: jslaby@suse.com Cc: juri.lelli@redhat.com Cc: maarten.lankhorst@linux.intel.com Cc: mark@fasheh.com Cc: mhocko@kernel.org Cc: mripard@kernel.org Cc: ocfs2-devel@oss.oracle.com Cc: rodrigo.vivi@intel.com Cc: sean@poorly.run Cc: st@kernel.org Cc: tj@kernel.org Cc: tytso@mit.edu Cc: vdavydov.dev@gmail.com Cc: vincent.guittot@linaro.org Cc: viro@zeniv.linux.org.uk Link: https://lkml.kernel.org/r/1568909380-32199-1-git-send-email-cai@lca.pw Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-07sh: add the sh_ prefix to early platform symbolsBartosz Golaszewski1-2/+2
Old early platform device support is now sh-specific. Before moving on to implementing new early platform framework based on real platform devices, prefix all early platform symbols with 'sh_'. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-3-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07drivers: move the early platform device support to arch/shBartosz Golaszewski1-1/+6
SuperH is the only user of the current implementation of early platform device support. We want to introduce a more robust approach to early probing. As the first step - move all the current early platform code to arch/sh. In order not to export internal drivers/base functions to arch code for this temporary solution - copy the two needed routines for driver matching from drivers/base/platform.c to arch/sh/drivers/platform_early.c. Also: call early_platform_cleanup() from subsys_initcall() so that it's called after all early devices are probed. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/20191003092913.10731-2-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07serial: 8250_omap: Fix gpio check for auto RTS/CTSAdam Ford1-2/+3
There are two checks to see if the manual gpio is configured, but these the check is seeing if the structure is NULL instead it should check to see if there are CTS and/or RTS pins defined. This patch uses checks for those individual pins instead of checking for the structure itself to restore auto RTS/CTS. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20191006163314.23191-2-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07serial: mctrl_gpio: Check for NULL pointerAdam Ford1-0/+3
When using mctrl_gpio_to_gpiod, it dereferences gpios into a single requested GPIO. This dereferencing can break if gpios is NULL, so this patch adds a NULL check before dereferencing it. If gpios is NULL, this function will also return NULL. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Link: https://lore.kernel.org/r/20191006163314.23191-1-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-07tty: serial: fsl_lpuart: Fix lpuart_flush_buffer()Andrey Smirnov1-1/+1
Fix incorrect read-modify-write sequence in lpuart_flush_buffer() that was reading from UARTPFIFO and writing to UARTCFIFO instead of operating solely on the latter. Fixes: 9bc19af9dacb ("tty: serial: fsl_lpuart: Flush HW FIFOs in .flush_buffer") Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reported-by: Vivien Didelot <vivien.didelot@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Fabio Estevam <festevam@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Jiri Slaby <jslaby@suse.com> Link: https://lore.kernel.org/r/20191004215537.5308-1-andrew.smirnov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: n_hdlc: fix build on SPARCRandy Dunlap1-0/+5
Fix tty driver build on SPARC by not using __exitdata. It appears that SPARC does not support section .exit.data. Fixes these build errors: `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o `.exit.data' referenced in section `.exit.text' of drivers/tty/n_hdlc.o: defined in discarded section `.exit.data' of drivers/tty/n_hdlc.o Reported-by: kbuild test robot <lkp@intel.com> Fixes: 063246641d4a ("format-security: move static strings to const") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/675e7bd9-955b-3ff3-1101-a973b58b5b75@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: uartps: Fix uartps_major handlingMichal Simek1-1/+7
There are two parts which should be fixed. The first one is to assigned uartps_major at the end of probe() to avoid complicated logic when something fails. The second part is initialized uartps_major number to 0 when last device is removed. This will ensure that on next probe driver will ask for new dynamic major number. Fixes: ab262666018d ("serial: uartps: Use the same dynamic major number for all ports") Reported-by: Paul Thomas <pthomas8589@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d2652cda992833315c4f96f06953eb547f928918.1570194248.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty:n_gsm.c: destroy port by tty_port_destroy()Xiaoming Ni1-0/+1
According to the comment of tty_port_destroy(): When a port was initialized using tty_port_init, one has to destroy the port by tty_port_destroy(); tty_port_init() is called in gsm_dlci_alloc() so tty_port_destroy() needs to be called in gsm_dlci_free() Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Link: https://lore.kernel.org/r/1569317156-45850-1-git-send-email-nixiaoming@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty_ldisc: simplify tty_ldisc_autoload initializationPavel Machek1-6/+1
We have got existing macro to check for CONFIG option, use it. Signed-off-by: Pavel Machek <pavel@denx.de> Link: https://lore.kernel.org/r/20190924083244.GA4344@amd Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurableOskar Senft2-0/+85
Make the SIRQ polarity for Aspeed AST24xx/25xx VUART configurable via sysfs. This setting need to be changed on specific host platforms depending on the selected host interface (LPC / eSPI). The setting is configurable via sysfs rather than device-tree to stay in line with other related configurable settings. On AST2500 the VUART SIRQ polarity can be auto-configured by reading a bit from a configuration register, e.g. the LPC/eSPI interface configuration bit. Tested: Verified on TYAN S7106 mainboard. Signed-off-by: Oskar Senft <osk@google.com> Link: https://lore.kernel.org/r/20190905144130.220713-1-osk@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: uartlite: fix exit path null pointerRandy Dunlap1-1/+2
Call uart_unregister_driver() conditionally instead of unconditionally, only if it has been previously registered. This uses driver.state, just as the sh-sci.c driver does. Fixes this null pointer dereference in tty_unregister_driver(), since the 'driver' argument is null: general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:tty_unregister_driver+0x25/0x1d0 Fixes: 238b8721a554 ("[PATCH] serial uartlite driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: stable <stable@vger.kernel.org> Cc: Peter Korsgaard <jacmet@sunsite.dk> Link: https://lore.kernel.org/r/9c8e6581-6fcc-a595-0897-4d90f5d710df@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: linflexuart: Fix magic SysRq handlingStefan-gabriel Mirea1-7/+14
Following an incorrect indentation reported to me by Dan Carpenter, I noticed that the SysRq lines were inherited from the lpuart driver[1] (note how the 'continue' is aligned to 'sport->port.sysrq = 0') and we have never actually tested the SysRq support. 'sport->sysrq = 0' is not necessary neither before nor after 'continue', because sysrq will already be 0 after uart_handle_sysrq_char() will finish. Also, since the LINFlexD driver never called uart_handle_break(), sysrq would have never been set to a nonzero value, so uart_handle_sysrq_char() was not going to do anything. Break conditions are detected based on a null data byte along with a framing error (stop bit sampled to 0). [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/serial/fsl_lpuart.c?h=b3e3bf2ef2c74f5ce5c19510edbbb9bfc1d249c2#n659 Fixes: 09864c1cdf5c ("tty: serial: Add linflexuart driver for S32V234") Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20190918184439.7465-1-stefan-gabriel.mirea@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: sh-sci: Use platform_get_irq_optional() for optional interruptsGeert Uytterhoeven1-2/+6
As platform_get_irq() now prints an error when the interrupt does not exist, scary warnings may be printed for optional interrupts: sh-sci e6550000.serial: IRQ index 1 not found sh-sci e6550000.serial: IRQ index 2 not found sh-sci e6550000.serial: IRQ index 3 not found sh-sci e6550000.serial: IRQ index 4 not found sh-sci e6550000.serial: IRQ index 5 not found Fix this by calling platform_get_irq_optional() instead for all but the first interrupts, which are optional. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191001180743.1041-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial/sifive: select SERIAL_EARLYCONChristoph Hellwig1-0/+1
The sifive serial driver implements earlycon support, but unless another driver is built in that supports earlycon support it won't be usable. Explicitly select SERIAL_EARLYCON instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com> Link: https://lore.kernel.org/r/20190910055923.28384-1-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: rda: Fix the link time qualifier of 'rda_uart_exit()'Christophe JAILLET1-1/+1
'exit' functions should be marked as __exit, not __init. Fixes: c10b13325ced ("tty: serial: Add RDA8810PL UART driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190910041702.7357-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: serial: owl: Fix the link time qualifier of 'owl_uart_exit()'Christophe JAILLET1-1/+1
'exit' functions should be marked as __exit, not __init. Fixes: fc60a8b675bd ("tty: serial: owl: Implement console driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190910041129.6978-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: 8250_dw: Use devm_clk_get_optional() to get the input clockAndy Shevchenko1-43/+32
Simplify the code which fetches the input clock by using devm_clk_get_optional(). This comes with a small functional change: previously all errors were ignored except deferred probe. Now all errors are treated as errors. If no input clock is present devm_clk_get_optional() will return NULL instead of an error which matches the behavior of the old code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190925162617.30368-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: 8250_lpss: Switch over to MSI interruptsFelipe Balbi1-12/+9
Some devices support MSI interrupts. Let's at least try to use them in platforms that provide MSI capability. While at that, remove the now duplicated code from qrp_serial_setup(). Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Link: https://lore.kernel.org/r/20191001115825.795700-1-felipe.balbi@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty/amba-pl011: fix a -Wunused-function warningQian Cai1-4/+0
pl011_dma_probe() is only used in pl011_dma_startup() which does only exist when CONFIG_DMA_ENGINE=y, so remove the unused dummy version to silence the warning. Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/1568726340-4518-1-git-send-email-cai@lca.pw Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: core: Use cons->index for preferred console registrationMichal Simek1-1/+2
The reason for this patch is xilinx_uartps driver which create one dynamic instance per IP with unique major and minor combinations. drv->nr is in this case all the time setup to 1. That means that uport->line is all the time setup to 0 and drv->tty_driver->name_base is doing shift in name to for example ttyPS3. register_console() is looping over console_cmdline array and looking for proper name/index combination which is in our case ttyPS/3. That's why every instance of driver needs to be registered with proper combination of name/number (ttyPS/3). Using uport->line is doing registration with ttyPS/0 which is wrong that's why proper console index should be used which is in cons->index field. Also it is visible that recording console should be done based on information about console not about the port but in most cases numbers are the same and xilinx_uartps is only one exception now. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/4a877f1c7189a7c45b59a6ebfc3de607e8758949.1567434470.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04tty: 8250_of: Use software emulated RS485 direction controlHeiko Schocher1-0/+31
Use software emulated RS485 direction control to provide RS485 API Currently it is not possible to use rs485 as pointer to rs485_config struct in struct uart_port is NULL in case we configure the port through device tree. Signed-off-by: Heiko Schocher <hs@denx.de> Link: https://lore.kernel.org/r/20190913050105.1132080-1-hs@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: sprd: Add polling IO supportLanqing Liu1-0/+33
In order to access the UART without the interrupts, the kernel uses the basic polling methods for IO with the device. With these methods implemented, it is now possible to enable kgdb during early boot over serial. Signed-off-by: Lanqing Liu <liuhhome@gmail.com> Reviewed-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/f112a741c053ac5fb0637e2f058be81e17f78ccc.1568862391.git.liuhhome@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04serial: imx: adapt rx buffer and dma periodsPhilipp Puschmann1-3/+2
Using only 4 DMA periods for UART RX is very few if we have a high frequency of small transfers - like in our case using Bluetooth with many small packets via UART - causing many dma transfers but in each only filling a fraction of a single buffer. Such a case may lead to the situation that DMA RX transfer is triggered but no free buffer is available. When this happens dma channel ist stopped - with the patch "dmaengine: imx-sdma: fix dma freezes" temporarily only - with the possible consequences that: with disabled hw flow control: If enough data is incoming on UART port the RX FIFO runs over and characters will be lost. What then happens depends on upper layer. with enabled hw flow control: If enough data is incoming on UART port the RX FIFO reaches a level where CTS is deasserted and remote device sending the data stops. If it fails to stop timely the i.MX' RX FIFO may run over and data get lost. Otherwise it's internal TX buffer may getting filled to a point where it runs over and data is again lost. It depends on the remote device how this case is handled and if it is recoverable. Obviously we want to avoid having no free buffers available. So we decrease the size of the buffers and increase their number and the total buffer size. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190923135916.1212-1-philipp.puschmann@emlix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-28Merge branch 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds1-0/+5
Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5cf42 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
2019-09-18Merge tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds46-1798/+3026
Pull tty/serial driver updates from Greg KH: "Even in this age, people are still making new serial port silicon, why... Anyway, here's the TTY and Serial driver update for 5.4-rc1. Lots of changes in here for a number of embedded serial port devices that are being worked on because people really like to see those console logs... Other than that, nothing major here, no core tty changes that anyone should care about. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (125 commits) serial: tegra: Add PIO mode support serial: tegra: report clk rate errors serial: tegra: add support to adjust baud rate serial: tegra: DT for Adjusted baud rates serial: tegra: add support to use 8 bytes trigger serial: tegra: set maximum num of uart ports to 8 serial: tegra: check for FIFO mode enabled status dt-binding: serial: tegra: add new chips serial: tegra: report error to upper tty layer serial: tegra: flush the RX fifo on frame error serial: tegra: avoid reg access when clk disabled serial: tegra: add support to ignore read serial: sprd: correct the wrong sequence of arguments dt-bindings: serial: Convert riscv,sifive-serial to json-schema serial: max310x: turn off transmitter before activating AutoCTS or auto transmitter flow control serial: max310x: Properly set flags in AutoCTS mode tty: serial: fix platform_no_drv_owner.cocci warnings dt-bindings: serial: Document Freescale LINFlexD UART serial: fsl_linflexuart: Update compatible string tty: n_gsm: avoid recursive locking with async port hangup ...
2019-09-17Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds1-7/+1
Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-34/+6
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-16Merge tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds5-6216/+0
Pull ia64 updates from Tony Luck: "The big change here is removal of support for SGI Altix" * tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits) genirq: remove the is_affinity_mask_valid hook ia64: remove CONFIG_SWIOTLB ifdefs ia64: remove support for machvecs ia64: move the screen_info setup to common code ia64: move the ROOT_DEV setup to common code ia64: rework iommu probing ia64: remove the unused sn_coherency_id symbol ia64: remove the SGI UV simulator support ia64: remove the zx1 swiotlb machvec ia64: remove CONFIG_ACPI ifdefs ia64: remove CONFIG_PCI ifdefs ia64: remove the hpsim platform ia64: remove now unused machvec indirections ia64: remove support for the SGI SN2 platform drivers: remove the SGI SN2 IOC4 base support drivers: remove the SGI SN2 IOC3 base support qla2xxx: remove SGI SN2 support qla1280: remove SGI SN2 support misc/sgi-xp: remove SGI SN2 support char/mspec: remove SGI SN2 support ...
2019-09-05serial: tegra: Add PIO mode supportKrishna Yarlagadda1-31/+86
Add PIO mode support in receive and transmit path with RX interrupt trigger of 16 bytes for Tegra194 and older chips. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-13-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: report clk rate errorsKrishna Yarlagadda1-2/+57
Standard UART controllers support +/-4% baud rate error tolerance. Tegra186 only supports 0% to +4% error tolerance whereas other Tegra chips support standard +/-4% rate. Add chip data for knowing error tolerance level for each soc. Creating new compatible for Tegra194 chip as it supports baud rate error tolerance of -2 to +2%, different from older chips. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-12-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to adjust baud rateKrishna Yarlagadda1-0/+68
Add support to adjust baud rates to fall under supported tolerance range through DT. Tegra186 chip has a hardware issue resulting in frame errors when tolerance level for baud rate is negative. Provided entries to adjust baud rate to be within acceptable range and work with devices that can send negative baud rate. Also report error when baud rate set is out of tolerance range of controller updated in device tree. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-11-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: add support to use 8 bytes triggerKrishna Yarlagadda1-2/+11
Add support to use 8 bytes trigger for Tegra186 SOC. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-9-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: set maximum num of uart ports to 8Krishna Yarlagadda1-2/+17
Set maximum number of UART ports to 8 as older chips have 5 ports and Tergra186 and later chips will have 8 ports. Add this info to chip data. Read device tree compatible of this driver and register uart driver with max ports of matching chip data. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-8-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: check for FIFO mode enabled statusKrishna Yarlagadda1-6/+46
Chips prior to Tegra186 needed delay of 3 UART clock cycles to avoid data loss. This issue is fixed in Tegra186 and a new flag is added to check if FIFO mode is enabled. chip data updated to check if this flag is available for a chip. Tegra186 has new compatible to enable this flag. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-7-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: report error to upper tty layerKrishna Yarlagadda1-3/+16
Report overrun/parity/frame/break errors to top tty layer. Add support to ignore break character if IGNBRK is set. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-5-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05serial: tegra: flush the RX fifo on frame errorShardar Shariff Md1-0/+14
FIFO reset/flush code implemented now does not follow programming guidelines. RTS line has to be turned off while flushing FIFOs to avoid new transfers. Also check LSR bits UART_LSR_TEMT and UART_LSR_DR to confirm FIFOs are flushed. Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Link: https://lore.kernel.org/r/1567572187-29820-4-git-send-email-kyarlagadda@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.