aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2012-03-08vt: tackle the main part of the selection logicAlan Cox2-8/+33
We leave the existing paste mess alone and just fix up the vt side of things. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08vt: waitevent is self locked so drop the tty_lockAlan Cox1-9/+2
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08vt: push down tioclinux casesAlan Cox3-8/+18
Some of this ventures into selection which is still a complete lost cause. We are not making it any worse. It's completely busted anyway. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08vt: push down the tty lock so we can see what is left to tackleAlan Cox2-37/+59
At this point we have the tty_lock guarding a couple of oddities, plus the translation and unimap still. We also extend the console_lock in a couple of spots where coverage is wrong and switch vcs_open to use the right lock ! [Fixed the locking issue Jiri reported] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08vt: sort out locking for font handlingAlan Cox1-10/+13
The font methods are console_lock covered. Unfortunately they don't extend the lock over all the needed tests. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08tty: cyclades: TIOCSERGETLSR should should store to a uintDan Carpenter1-1/+1
TIOCSERGETLSR should be saved in a uint so the cast here to unsigned long is a bug. Reported-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08tty: serial: OMAP: Fix oops due to NULL pdata in DT bootCousson, Benoit1-3/+3
The following commit: be4b0281956c5cae4f63f31f11d07625a6988766 (tty: serial: OMAP: block idle while the UART is transferring data in PIO mode), is introducing an oops if OMAP is booted using device tree blob because the pdata will not be initialized. Check if pdata is set before de-referencing it. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08vt:tackle kbd_tableAlan Cox5-359/+629
Keyboard struct lifetime is easy, but the locking is not and is completely ignored by the existing code. Tackle this one head on - Make the kbd_table private so we can run down all direct users - Hoick the relevant ioctl handlers into the keyboard layer - Lock them with the keyboard lock so they don't change mid keypress - Add helpers for things like console stop/start so we isolate the poking around properly - Tweak the braille console so it still builds There are a couple of FIXME locking cases left for ioctls that are so hideous they should be addressed in a later patch. After this patch the kbd_table is private and all the keyboard jiggery pokery is in one place. This update fixes speakup and also a memory leak in the original. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dtOlof Johansson1-12/+37
* 'dt' of git://github.com/hzhuang1/linux: (6 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support (plus update to v3.3-rc6)
2012-03-07serial: pxa: add OF supportHaojian Zhuang1-12/+37
Parse uart device id from alias in DTS file. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2012-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/vmxnet3/vmxnet3_drv.c Small vmxnet3 conflict with header size bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-05pinctrl: API changes to support multiple states per deviceStephen Warren1-9/+3
The API model is changed from: p = pinctrl_get(dev, "state1"); pinctrl_enable(p); ... pinctrl_disable(p); pinctrl_put(p); p = pinctrl_get(dev, "state2"); pinctrl_enable(p); ... pinctrl_disable(p); pinctrl_put(p); to this: p = pinctrl_get(dev); s1 = pinctrl_lookup_state(p, "state1"); s2 = pinctrl_lookup_state(p, "state2"); pinctrl_select_state(p, s1); ... pinctrl_select_state(p, s2); ... pinctrl_put(p); This allows devices to directly transition between states without disabling the pin controller programming and put()/get()ing the configuration data each time. This model will also better suit pinconf programming, which doesn't have a concept of "disable". The special-case hogging feature of pin controllers is re-written to use the regular APIs instead of special-case code. Hence, the pinmux-hogs debugfs file is removed; see the top-level pinctrl-handles files for equivalent data. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-04ppp: Replace uses of <linux/if_ppp.h> with <linux/ppp-ioctl.h>Paul Mackerras2-2/+2
Since all that include/linux/if_ppp.h does is #include <linux/ppp-ioctl.h>, this replaces the occurrences of #include <linux/if_ppp.h> with #include <linux/ppp-ioctl.h>. It also corrects an error in Documentation/networking/l2tp.txt, where it referenced include/linux/if_ppp.h as the source of some definitions that are actually now defined in include/linux/if_pppol2tp.h. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-02pinctrl: assume map table entries can't have a NULL name fieldStephen Warren1-1/+1
pinctrl_register_mappings() already requires that every mapping table entry have a non-NULL name field. Logically, this makes sense too; drivers should always request a specific named state so they know what they're getting. Relying on getting the first mentioned state in the mapping table is error-prone, and a nasty special case to implement, given that a given the mapping table may define multiple states for a device. Remove a small part of the documentation that talked about optionally requesting a specific state; it's mandatory now. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-02Merge branches 'depends/irqdomain' and 'at91/base2+cleanup' into next/dtArnd Bergmann1-0/+2
These two branches are a dependency for the at91 device tree changes, so we pull them in here. at91/base2+cleanup will get merged through the arm-soc cleanup2 branch, while the irqdomain tree will be sent by Grant before this one gets integrated. Conflicts: drivers/rtc/rtc-at91sam9.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-29Merge branch 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanupArnd Bergmann1-0/+2
* 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits) ARM: at91: properly sort dtb files in Makefile.boot ARM: at91: add at91sam9g25ek.dts in Makefile.boot ARM: at91/board-dt: drop default console Atmel: move console default platform_device to serial driver ARM: at91: merge SRAM Memory banks thanks to mirroring ARM: at91: finally drop at91_sys_read/write ARM: at91/rtc-at91sam9: pass the GPBR to use via resources ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use ARM: at91/PMC: make register base soc independent ARM: at91/PMC: move assignment out of printf ARM: at91/pm_slowclock: add runtime detection of memory contoller ARM: at91: make sdram/ddr register base soc independent ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h ARM: at91/pm_slowclock: function slow_clock() accepts parameters ARM: at91/pm_slowclock: rename register to named define ARM: at91/ST: remove not needed casts ARM: at91: make ST (System Timer) soc independent ARM: at91: make matrix register base soc independent ARM: at91/at91x40: remove use of at91_sys_read/write Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board, at91/pm_cleanup and at91/base. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-27tty: keyboard.c: add uaccess.h to fix a build problem on sparc32Greg Kroah-Hartman1-0/+1
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24tty/powerpc: early udbg consoles can't be modulesStephen Rothwell1-1/+1
Fixes these build errors: ERROR: ".udbg_printf" [drivers/tty/ehv_bytechan.ko] undefined! ERROR: ".register_early_udbg_console" [drivers/tty/ehv_bytechan.ko] undefined! ERROR: "udbg_putc" [drivers/tty/ehv_bytechan.ko] undefined! Cc: Timur Tabi <timur@freescale.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24vt: tidy a few bits of checkpatch noiseAlan Cox1-9/+9
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24vt: lock the accent tableAlan Cox2-78/+165
First step to debletcherising the vt console layer - pick a victim and fix the locking This is a nice simple object with its own rules so lets pick it out for treatment. The user of the table already has a lock so we will also use the same lock for updates. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24Revert "TTY: pty, remove superfluous ptm test"Greg Kroah-Hartman1-1/+4
This reverts commit a50f724a432997321cabb6c9e665c28e34850f78. Sasha reported that this causes problems, so revert it. Cc: Alan Cox <alan@linux.intel.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24Revert "TTY: get rid of BTM around devpts_*"Greg Kroah-Hartman2-3/+5
This reverts commit d3bda5298aad98c7a27678bdd0dd9d008ab9e685. Sasha reported that this causes problems, so revert it. Cc: Sasha Levin <levinsasha928@gmail.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24amba-pl011​/dma: Add check for the residue in DMA callbackChanho Min1-1/+16
In DMA-operated uart, I found that rx data can be taken by the UART interrupts during the DMA irq handler. pl011_int is occurred just before it goes inside spin_lock_irq. When it returns to the callback, DMA buffer already has been flushed. Then, pl011_dma_rx_chars gets invalid data. So I add check for the residue as the patch bellow. Signed-off-by: Chanho Min <chanho.min@lge.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24serial: samsung: fix s3c2442 platform dataDenis 'GNUtoo' Carikli1-1/+1
Without that fix machines having a s3c2442 CPU have something like that in dmesg: samsung-uart s3c2440-uart.0: could not find driver data samsung-uart s3c2440-uart.1: could not find driver data samsung-uart s3c2440-uart.2: could not find driver data And serial is never initialized. The previous log was obtained trough early printk on the gta02 machine. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24tty/powerpc: early udbg consoles can't be modulesStephen Rothwell1-1/+1
Fixes these build errors: ERROR: ".udbg_printf" [drivers/tty/ehv_bytechan.ko] undefined! ERROR: ".register_early_udbg_console" [drivers/tty/ehv_bytechan.ko] undefined! ERROR: "udbg_putc" [drivers/tty/ehv_bytechan.ko] undefined! Cc: Timur Tabi <timur@freescale.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24serial: Fix typo in sn_console.cMasanari Iida1-2/+2
Correct spelling "receieve" to "receive" in drivers/tty/serial/sn_console.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24tty/serial/mux.c: linux/tty.h included twiceDanny Kukawka1-1/+0
drivers/tty/serial/mux.c included 'linux/tty.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-23Atmel: move console default platform_device to serial driverJean-Christophe PLAGNIOL-VILLARD1-0/+2
This variable spread on every SoC that is using the atmel_serial.c driver can be included directly into the latter. This will allow to compile multiple soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: kernel@avr32linux.org
2012-02-22[IA64] genirq fixup for SGI/SNDimitri Sivanich1-0/+1
This patch allows the system to boot and enables the console and at least some hardware drivers, as well as some platform error handling. Tested on a variety of SGI Altix system without issues. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Tested-by: Raymund Will <rw@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-02-22serial/sirf: fixup for changes to pin controlLinus Walleij2-11/+11
We changed the signature of the pin multiplexing functions to handle any pin business, so fix up the Sirf driver to call this new interface and rename some variables to make the semantics understandable. Cc: linux-serial@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-22Merge branch 'lpc32xx/drivers' into next/driversArnd Bergmann7-8/+28
* lpc32xx/drivers: (566 commits) ARM: LPC32xx: ADC support for mach-lpc32xx Includes an update to Linux 3.3-rc4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-22dmaengine: Pass dma_slave_config .device_fc = NULL for all existing usersViresh Kumar1-0/+3
.device_fc is added in struct dma_slave_config recently. All user drivers, which want DMA to be the flow controller must pass this field as false. As earlier driver don't look to use this feature, mark it false for now. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-21serial: Fix typo in sn_console.cMasanari Iida1-2/+2
Correct spelling "receieve" to "receive" in drivers/tty/serial/sn_console.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-10tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.hPaul Gortmaker7-44/+8
There are multiple users of this file from different source paths now, and rather than have ../ paths in include statements, just move the file to the linux header dir. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-10Merge tag 'tty-3.3-rc3' tty-nextGreg Kroah-Hartman24-193/+1020
This is needed to handle the 8250 file merge mess properly for future patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09tty: serial: omap-serial: wakeup latency constraint is in microseconds, not millisecondsPaul Walmsley1-2/+1
The receive FIFO wakeup latency estimate in the omap-serial driver is three orders of magnitude too small. This effectively prevents the MPU from going to a low-power state when CONFIG_CPU_IDLE=y. This is a major power management regression and masks some other FIFO-related bugs in the driver. Fix by correcting the most egregious problem in the RX wakeup latency estimate. There are several other flaws in the estimator; these will be fixed by a separate patch series intended for 3.4. The difference in low-power states with this patch can be observed via debugfs in pm_debug/count. This estimate does not have any effect when CONFIG_CPU_IDLE=n. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09tty: serial: OMAP: block idle while the UART is transferring data in PIO modePaul Walmsley1-0/+7
Prevent OMAP UARTs from going idle while they are still transferring data in PIO mode. This works around an oversight in the OMAP UART hardware present in OMAP34xx and earlier: an idle UART won't send a wakeup when the TX FIFO threshold is reached. This causes long delays during data transmission when the MPU powerdomain enters a low-power mode. The MPU interrupt controller is not able to respond to interrupts when it's in a low-power state, so the TX buffer is not refilled until another wakeup event occurs. This fix changes the erratum i291 DMA idle workaround. Rather than toggling between force-idle and no-idle, it will toggle between smart-idle and no-idle. The important part of the workaround is the no-idle part, so this shouldn't result in any change in behavior. This fix should work on all OMAP UARTs. Future patches intended for the 3.4 merge window will make this workaround conditional on a "feature" flag, and will use the OMAP36xx+ TX event wakeup support. Thanks to Kevin Hilman <khilman@ti.com> for mentioning the erratum i291 workaround, which led to the development of this approach. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Govindraj.R <govindraj.raja@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO modePaul Walmsley1-3/+17
In the (default) PIO mode, use a one-byte RX FIFO threshold. The OMAP UART IP blocks do not appear to be capable of waking the system under an RX timeout condition. Since the previous RX FIFO threshold was 16 bytes, this meant that omap-serial.c did not become aware of any received data until all those bytes arrived or until another UART interrupt occurred. This made the serial console and presumably other serial applications (GPS, serial Bluetooth) unusable or extremely slow. A 1-byte RX FIFO threshold also allows the MPU to enter a low-power consumption state while waiting for the FIFO to fill. This can be verified using the serial console by comparing the behavior when "0123456789abcde" is pasted in from another window, with the behavior when "0123456789abcdef" is pasted in. Since the former string is less than sixteen bytes long, the string is not echoed for some time, while the latter string is echoed immediately. DMA operation is unaffected by this patch. Thanks to Russell King - ARM Linux <linux@arm.linux.org.uk> for some additional information on the standard behavior of the RX timeout event, which was used to improve this commit description. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Govindraj Raja <govindraj.r@ti.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09tty: serial: altera_uart: Add CONSOLE_POLL supportTobias Klauser2-1/+25
This allows altera_uart to be used for KGDB debugging over serial line. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09tty: serial: altera_uart: remove early_altera_uart_setupTobias Klauser1-23/+0
The function has no users inside the tree and the nios2 (out-of-mainline) port doesn't use it either (anymore). Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09sysrq: Properly check for kernel threadsAnton Vorontsov1-3/+6
There's a real possibility of killing kernel threads that might have issued use_mm(), so kthread's mm might become non-NULL. This patch fixes the issue by checking for PF_KTHREAD (just as get_task_mm()). Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09sysrq: Fix possible race with exiting taskAnton Vorontsov1-0/+2
sysrq should grab the tasklist lock, otherwise calling force_sig() is not safe, as it might race with exiting task, which ->sighand might be set to NULL already. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09serial: pch_uart: trivail cleanup by removing the pch_uart_hal_request()Feng Tang1-13/+3
pch_uart_hal_request() has parameters which it never uses, also it is very short, so merge it with its caller to make code cleaner. No functional changes at all. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09serial: pch_uart: trivial cleanup by removing the get_msr()Feng Tang1-21/+8
The short get_msr() has some unnecessary code and only used once, so merge it with its caller to make code cleaner. No functional change at all. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09serial: pch_uart: add debugfs hook for register dumpFeng Tang1-0/+84
This driver will be use as interfaces for multiple kinds of devices like Bluetooth/GPS etc, this debug hook will make driver debugging much easier. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-08m32r: relocate drivers back out of 8250 dirPaul Gortmaker3-0/+0
Commit 9bef3d4197379a995fa80f81950bbbf8d32e9e8b "serial: group all the 8250 related code together" inadvertently swept up the m32r driver in the move, because it had comments mentioning 8250 registers within it. However these are only there by nature of the driver being based off the 8250 source code -- the hardware itself does not actually have any relation to the original 8250 style UARTs. Reported-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-03drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layerSamuel Thibault1-1/+0
KDFONTOP(GET) currently fails with EIO when being run in a 32bit userland with a 64bit kernel if the font width is not 8. This is because of the setting of the KD_FONT_FLAG_OLD flag, which makes con_font_get return EIO in such case. This flag should *not* be set for KDFONTOP, since it's actually the whole point of this flag (see comment in con_font_set for instance). Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Arthur Taylor <art@ified.ca> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-03Merge branch 'master' into for-nextJiri Kosina68-2349/+3944
Sync with Linus' tree to be able to apply patch to a newer code (namely drivers/gpu/drm/gma500/psb_intel_lvds.c)
2012-02-03tty: fix comment typo in synclink_gt.cMasanari Iida1-1/+1
Fix typo "looopback" to "loopback" in synclink_gt.c Signed-off-by: Masanari Iida<standby24x7@gmail.com> cc:Jiri Koshina<jkosina@suze.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-03tty: fix a build failure on sparcCong Wang1-1/+1
On sparc, there is a build failure: drivers/tty/serial/8250/8250.c:48:21: error: suncore.h: No such file or directory drivers/tty/serial/8250/8250.c:3275: error: implicit declaration of function 'sunserial_register_minors' drivers/tty/serial/8250/8250.c:3305: error: implicit declaration of function 'sunserial_unregister_minors' this is due to commit 9bef3d4197379a995fa80f81950bbbf8d32e9e8b (serial: group all the 8250 related code together) moved these files into 8250/ subdirectory, but forgot to change the reference to drivers/tty/serial/suncore.h. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.