aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ufs
AgeCommit message (Collapse)AuthorFilesLines
2022-06-27scsi: ufs: ufs-mediatek: Support host power controlPo-Wen Kao2-0/+17
Add interfaces for controlling the host power to optimize the power consumption in MediaTek UFS platforms. Link: https://lore.kernel.org/r/20220623035052.18802-7-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27scsi: ufs: ufs-mediatek: Disable reset confirm feature by UniProPo-Wen Kao1-0/+5
In MediaTek UFS platforms, UniPro will not return reset confirm if it is in POWERDOWN state thus hang issue may happen while disabling UFSHCI. Simply disable this feature before UniPro leaves POWERDOWN state. Link: https://lore.kernel.org/r/20220623035052.18802-6-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27scsi: ufs: ufs-mediatek: Add stage information for ref-clk controlPeter Wang2-6/+7
Add "PRE_CHANGE" and "POST_CHANGE" information for ref-clk control to precisely configure the low-power state of the parent of ref-clk. Link: https://lore.kernel.org/r/20220623035052.18802-5-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27scsi: ufs: ufs-mediatek: Prevent host hang by setting CLK_CG earlyPeter Wang2-0/+9
Some UFSHCI hosts in MediaTek UFS platform need workaround to prevent host hang issue by setting CLK_CG bit before host is enabled. This operation shall have no side effect on those platforms which do not support this bit. Link: https://lore.kernel.org/r/20220623035052.18802-4-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27scsi: ufs: ufs-mediatek: Always add delays for VCC operationsPeter Wang1-2/+3
MediaTek decides to always add delays before and after VCC is turned-off. Link: https://lore.kernel.org/r/20220623035052.18802-3-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27scsi: ufs: ufs-mediatek: Fix build warningsStanley Chu1-4/+4
Fix build warnings: 1. ../drivers/ufs/host/ufs-mediatek.c:1375:5: error: no previous prototype for function 'ufs_mtk_system_suspend' [-Werror,-Wmissing-prototypes] int ufs_mtk_system_suspend(struct device *dev) ^ ../drivers/ufs/host/ufs-mediatek.c:1375:1: note: declare 'static' if the function is not intended to be used outside of this translation unit int ufs_mtk_system_suspend(struct device *dev) ^ static 2. ../drivers/ufs/host/ufs-mediatek.c:702:50: error: format specifies type 'unsigned long' but the argument has type 'int' [-Werror,-Wformat] snprintf(vcc_name, MAX_VCC_NAME, "vcc-ufs%lu", ver); ~~~ ^~~ %d Link: https://lore.kernel.org/r/20220623035052.18802-2-stanley.chu@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27scsi: ufs: ufshcd: Constify pointed dataKrzysztof Kozlowski2-23/+25
For code safety, constify arrays and pointers to data which is not modified. Link: https://lore.kernel.org/r/20220623102432.108059-4-krzysztof.kozlowski@linaro.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-27scsi: ufs: ufshcd-pltfrm: Constify pointed dataKrzysztof Kozlowski2-7/+7
For code safety, constify pointers to data which is not modified. Link: https://lore.kernel.org/r/20220623102432.108059-3-krzysztof.kozlowski@linaro.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21scsi: ufs: core: Fix typos in error messagesWolfram Sang1-2/+2
Should be "retries" instead of "retires". Link: https://lore.kernel.org/r/20220621144653.62630-1-wsa+renesas@sang-engineering.com Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21scsi: ufs: ufs-mediatek: Fix build error and type mismatchRen Zhijie1-1/+3
If CONFIG_PM_SLEEP is not set. make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will fail: drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_vreg_fix_vcc’: drivers/ufs/host/ufs-mediatek.c:688:46: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ [-Wformat=] snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1); ~^ ~~~~~~ %lu drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_suspend’: drivers/ufs/host/ufs-mediatek.c:1371:8: error: implicit declaration of function ‘ufshcd_system_suspend’; did you mean ‘ufs_mtk_system_suspend’? [-Werror=implicit-function-declaration] ret = ufshcd_system_suspend(dev); ^~~~~~~~~~~~~~~~~~~~~ ufs_mtk_system_suspend drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_resume’: drivers/ufs/host/ufs-mediatek.c:1386:9: error: implicit declaration of function ‘ufshcd_system_resume’; did you mean ‘ufs_mtk_system_resume’? [-Werror=implicit-function-declaration] return ufshcd_system_resume(dev); ^~~~~~~~~~~~~~~~~~~~ ufs_mtk_system_resume cc1: some warnings being treated as errors The declaration of func "ufshcd_system_suspend()" depends on CONFIG_PM_SLEEP, so the function wrapper ufs_mtk_system_suspend() should wrapped by CONFIG_PM_SLEEP too. Link: https://lore.kernel.org/r/20220619115432.205504-1-renzhijie2@huawei.com Fixes: 3fd23b8dfb54 ("scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Disable unused VCCQx power railsStanley Chu1-0/+24
Some MediaTek UFS platforms support different VCCQx power rails, for example, both 1.2v and 1.8v VCCQx, in a single kernel image. To optimize the system power consumption, provide a way to disable and release the unused power rail during the device probing. Link: https://lore.kernel.org/r/20220616053725.5681-12-stanley.chu@mediatek.com Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Support multiple VCC sourcesStanley Chu2-1/+59
Support multiple VCC sources in MediaTek UFS platforms. Two options are provided and distinguished by specific device tree attributes as below examples, [Option 1: By numbering] mediatek,ufs-vcc-by-num; vcc-opt1-supply = <&mt6373_vbuck4_ufs>; vcc-opt2-supply = <&mt6363_vemc>; [Option 2: By UFS version] mediatek,ufs-vcc-by-ver; vcc-ufs3-supply = <&mt6373_vbuck4_ufs>; Link: https://lore.kernel.org/r/20220616053725.5681-11-stanley.chu@mediatek.com Signed-off-by: Alice Chao <alice.chao@mediatek.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Export regulator functionsStanley Chu3-3/+7
Export below regulator functions to allow vendors to customize regulator configuration in their own platforms. int ufshcd_populate_vreg(struct device *dev, const char *name, struct ufs_vreg **out_vreg); int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg); Link: https://lore.kernel.org/r/20220616053725.5681-10-stanley.chu@mediatek.com Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Support low-power mode for parents of VCCQxStanley Chu2-13/+37
Provide the facility to configure parents of VCCQx power rails as low-power or full-power mode in MediaTek UFS platforms. Link: https://lore.kernel.org/r/20220616053725.5681-9-stanley.chu@mediatek.com Signed-off-by: Alice Chao <alice.chao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Support flexible parameters for SMC callsStanley Chu2-16/+39
Provide flexible number of parameters for UFS SMC calls to be used in a subsequent commit. Link: https://lore.kernel.org/r/20220616053725.5681-8-stanley.chu@mediatek.com Signed-off-by: Alice Chao <alice.chao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Support low-power mode for VCCQPeter Wang1-6/+13
Allow VCCQ to enter low-power mode, and also remove the restriction of VCC because VCCQ/VCCQ2 can be changed to low-power mode even if VCC stays on while the device is not in active power mode. Link: https://lore.kernel.org/r/20220616053725.5681-7-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Prevent device regulators setting LPM incorrectlyPo-Wen Kao1-2/+10
Device regulatrs are allowed to enter low-power mode if neither device is not in active mode, nor VCC does not keep on. Fix this by adding conditions before LPM decision. Link: https://lore.kernel.org/r/20220616053725.5681-6-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulatorsPo-Wen Kao1-5/+53
Currently the LPM configurations of device regulators may not work since VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed. Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm(). Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Introduce workaround for power mode changeCC Chou2-2/+59
Some MediaTek SoC chips need special flow for power mode change, especially for chips supporting HS-G5. Enable the workaround by setting the host-specific capability. Link: https://lore.kernel.org/r/20220616053725.5681-4-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: CC Chou <cc.chou@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Dennis Yu <tun-yu.yu@mediatek.com> Signed-off-by: Peter Wang <peter.want@medaitek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Fix ADAPT logic for HS-G5Stanley Chu1-1/+1
ADAPT now is added not only for HS Gear4 mode but also higher gears. Fix the logic for higher gears. Link: https://lore.kernel.org/r/20220616053725.5681-3-stanley.chu@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Export ufshcd_uic_change_pwr_mode()Stanley Chu1-1/+2
Export ufshcd_uic_change_pwr_mode() to allow vendors to use it for SoC-specific power mode change design limitations. Link: https://lore.kernel.org/r/20220616053725.5681-2-stanley.chu@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: host: ufs-exynos: Use already existing definitionAlim Akhtar1-2/+3
UFS core already uses RX_MIN_ACTIVATETIME_CAPABILITY macro, let's use the same in driver as well instead of having a different macro name for the same offset. Link: https://lore.kernel.org/r/20220615121204.16642-2-alim.akhtar@samsung.com Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: host: ufs-exynos: Remove unused definesAlim Akhtar1-10/+0
Remove #defines as those are not used anywhere in the driver file. Link: https://lore.kernel.org/r/20220615121204.16642-1-alim.akhtar@samsung.com Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Fix a race between the interrupt handler and the reset handlerBart Van Assche1-9/+19
Prevent that both the interrupt handler and the reset handler try to complete a request at the same time. This patch is the result of an analysis of the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE 5.10.107-android13-4-00051-g1e48e8970cca-ab8664745 #1 pc : ufshcd_release_scsi_cmd+0x30/0x46c lr : __ufshcd_transfer_req_compl+0x4fc/0x9c0 Call trace: ufshcd_release_scsi_cmd+0x30/0x46c __ufshcd_transfer_req_compl+0x4fc/0x9c0 ufshcd_poll+0xf0/0x208 ufshcd_sl_intr+0xb8/0xf0 ufshcd_intr+0x168/0x2f4 __handle_irq_event_percpu+0xa0/0x30c handle_irq_event+0x84/0x178 handle_fasteoi_irq+0x150/0x2e8 __handle_domain_irq+0x114/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 cpuidle_enter_state+0x3ac/0x8c4 do_idle+0x2fc/0x55c cpu_startup_entry+0x84/0x90 kernel_init+0x0/0x310 start_kernel+0x0/0x608 start_kernel+0x4ec/0x608 Link: https://lore.kernel.org/r/20220613214442.212466-4-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Support clearing multiple commands at onceBart Van Assche1-14/+28
Modify ufshcd_clear_cmd() such that it supports clearing multiple commands at once instead of one command at a time. This change will be used in a later patch to reduce the time spent in the reset handler. Link: https://lore.kernel.org/r/20220613214442.212466-3-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Simplify ufshcd_clear_cmd()Bart Van Assche1-6/+2
Remove the local variable 'err'. This patch does not change any functionality. Link: https://lore.kernel.org/r/20220613214442.212466-2-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: exynos: Constify driver dataKrzysztof Kozlowski1-5/+4
Constify the drv data because it should not be modified (used by multiple devices). Link: https://lore.kernel.org/r/20220613101429.114449-1-krzysztof.kozlowski@linaro.org Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: ufs-renesas: Add support for Renesas R-Car UFS controllerYoshihiro Shimoda3-0/+425
Add support for Renesas R-Car UFS controller which needs vendor-specific initialization. Link: https://lore.kernel.org/r/20220603110524.1997825-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: core: Add UFSHCD_QUIRK_HIBERN_FASTAUTOYoshihiro Shimoda1-2/+7
Add UFSHCD_QUIRK_HIBERN_FASTAUTO quirk for host controllers which supports auto-hibernate the capability but only FASTAUTO mode. Link: https://lore.kernel.org/r/20220603110524.1997825-4-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESSYoshihiro Shimoda1-0/+2
Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for host controllers which do not support 64-bit addressing. Link: https://lore.kernel.org/r/20220603110524.1997825-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: host: ufs-exynos: Add support for FSD UFS HCIAlim Akhtar2-0/+141
Adds support of UFS HCI which is found in Tesla Full Self-Driving (FSD) SoC. Link: https://lore.kernel.org/r/20220610104119.66401-7-alim.akhtar@samsung.com Co-developed-by: Bharat Uppal <bharat.uppal@samsung.com> Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: host: ufs-exynos: Add mphy apb clock maskAlim Akhtar1-1/+2
Bit[3] of HCI_CLKSTOP_CTRL register is for enabling/disabling MPHY APB clock. Lets add it to CLK_STOP_MASK, so that the same can be controlled during clock masking/unmasking. Link: https://lore.kernel.org/r/20220610104119.66401-6-alim.akhtar@samsung.com Tested-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds43-0/+24259
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes plus other trivial updates. The major change of note is moving ufs out of scsi and a minor update to lpfc vmid handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters scsi: mpi3mr: Fix kernel-doc scsi: lpfc: Add support for ATTO Fibre Channel devices scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning scsi: sd_zbc: Prevent zone information memory leak scsi: sd: Fix potential NULL pointer dereference scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings scsi: myrb: Fix up null pointer access on myrb_cleanup() scsi: core: Unexport scsi_bus_type scsi: sd: Don't call blk_cleanup_disk() in sd_probe() scsi: ufs: ufshcd: Delete unnecessary NULL check scsi: isci: Fix typo in comment scsi: pmcraid: Fix typo in comment scsi: smartpqi: Fix typo in comment scsi: qedf: Fix typo in comment scsi: esas2r: Fix typo in comment scsi: storvsc: Fix typo in comment scsi: ufs: Split the drivers/scsi/ufs directory scsi: qla1280: Remove redundant variable ...
2022-05-23scsi: ufs: ufshcd: Delete unnecessary NULL checkDan Carpenter1-4/+1
The 'info' pointer points to somewhere in the middle of the 'hba' struct. It can't possibly be NULL. Delete the NULL check. Link: https://lore.kernel.org/r/YotFotj43TkB8Rid@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-19scsi: ufs: Split the drivers/scsi/ufs directoryBart Van Assche43-0/+24265
Split the drivers/scsi/ufs directory into 'core' and 'host' directories under the drivers/ufs/ directory. Move shared header files into the include/ufs/ directory. This separation makes it clear which header files UFS drivers are allowed to include (include/ufs/*.h) and which header files UFS drivers are not allowed to include (drivers/ufs/core/*.h). Update the MAINTAINERS file. Add myself as a UFS reviewer. Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Keoseong Park <keosung.park@samsung.com> Tested-by: Bean Huo <beanhuo@micron.com> Tested-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Acked-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.