aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/core (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-26usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream seriesMichael Niewöhner1-0/+3
Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to function correctly. This fixes a but where double pressing numlock locks up the device completely with need to replug the keyboard. Signed-off-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-14usb: core: Fix hub port connection events lostDennis Wassenberg1-1/+3
This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset only if a device is was attached to the hub port before resetting the hub port. Using a Lenovo T480s attached to the ultra dock it was not possible to detect some usb-c devices at the dock usb-c ports because the hub_port_reset code will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the new device was attached such that it was not detected. This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is currently no device attached to the port before the hub port reset. This will avoid clearing the connection bit for new attached devices. Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07USB: quirks: Add no-lpm quirk for Raydium touchscreensKai-Heng Feng1-0/+5
Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07usb: quirks: Add delay-init quirk for Corsair K70 LUX RGBEmmanuel Pescosta1-0/+3
Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-07USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hubKai-Heng Feng2-3/+17
Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-26Merge tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds7-27/+84
Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
2018-10-24Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds1-2/+2
Pull siginfo updates from Eric Biederman: "I have been slowly sorting out siginfo and this is the culmination of that work. The primary result is in several ways the signal infrastructure has been made less error prone. The code has been updated so that manually specifying SEND_SIG_FORCED is never necessary. The conversion to the new siginfo sending functions is now complete, which makes it difficult to send a signal without filling in the proper siginfo fields. At the tail end of the patchset comes the optimization of decreasing the size of struct siginfo in the kernel from 128 bytes to about 48 bytes on 64bit. The fundamental observation that enables this is by definition none of the known ways to use struct siginfo uses the extra bytes. This comes at the cost of a small user space observable difference. For the rare case of siginfo being injected into the kernel only what can be copied into kernel_siginfo is delivered to the destination, the rest of the bytes are set to 0. For cases where the signal and the si_code are known this is safe, because we know those bytes are not used. For cases where the signal and si_code combination is unknown the bits that won't fit into struct kernel_siginfo are tested to verify they are zero, and the send fails if they are not. I made an extensive search through userspace code and I could not find anything that would break because of the above change. If it turns out I did break something it will take just the revert of a single change to restore kernel_siginfo to the same size as userspace siginfo. Testing did reveal dependencies on preferring the signo passed to sigqueueinfo over si->signo, so bit the bullet and added the complexity necessary to handle that case. Testing also revealed bad things can happen if a negative signal number is passed into the system calls. Something no sane application will do but something a malicious program or a fuzzer might do. So I have fixed the code that performs the bounds checks to ensure negative signal numbers are handled" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits) signal: Guard against negative signal numbers in copy_siginfo_from_user32 signal: Guard against negative signal numbers in copy_siginfo_from_user signal: In sigqueueinfo prefer sig not si_signo signal: Use a smaller struct siginfo in the kernel signal: Distinguish between kernel_siginfo and siginfo signal: Introduce copy_siginfo_from_user and use it's return value signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE signal: Fail sigqueueinfo if si_signo != sig signal/sparc: Move EMT_TAGOVF into the generic siginfo.h signal/unicore32: Use force_sig_fault where appropriate signal/unicore32: Generate siginfo in ucs32_notify_die signal/unicore32: Use send_sig_fault where appropriate signal/arc: Use force_sig_fault where appropriate signal/arc: Push siginfo generation into unhandled_exception signal/ia64: Use force_sig_fault where appropriate signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn signal/ia64: Use the generic force_sigsegv in setup_frame signal/arm/kvm: Use send_sig_mceerr signal/arm: Use send_sig_fault where appropriate signal/arm: Use force_sig_fault where appropriate ...
2018-10-16USB: fix the usbfs flag sanitization for control transfersAlan Stern1-2/+2
Commit 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") checks the transfer flags for URBs submitted from userspace via usbfs. However, the check for whether the USBDEVFS_URB_SHORT_NOT_OK flag should be allowed for a control transfer was added in the wrong place, before the code has properly determined the direction of the control transfer. (Control transfers are special because for them, the direction is set by the bRequestType byte of the Setup packet rather than direction bit of the endpoint address.) This patch moves code which sets up the allow_short flag for control transfers down after is_in has been set to the correct value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+24a30223a4b609bb802e@syzkaller.appspotmail.com Fixes: 7a68d9fb8510 ("USB: usbdevfs: sanitize flags more") CC: Oliver Neukum <oneukum@suse.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09USB: core: remove set but not used variable 'udev'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/core/driver.c: In function 'usb_driver_claim_interface': drivers/usb/core/driver.c:513:21: warning: variable 'udev' set but not used [-Wunused-but-set-variable] Since commit c183813fcee44a24 ("USB: remove LPM management from usb_driver_claim_interface()"), 'udev' is not used. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09usb: core: fix memory leak on port_dev_path allocationColin Ian King1-1/+3
Currently the allocation of port_dev_path from the call to kobject_get_path is not being kfree'd, causing a memory leak. Fix this by kfree'ing this at the end of the function. Add an extra error exit path to fix one of the early leaks when envp[0] fails to be allocated. Detected by CoverityScan, CID#1473771 ("Resource Leak") Fixes: 201af55da8a3 ("usb: core: added uevent for over-current") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-03signal: Distinguish between kernel_siginfo and siginfoEric W. Biederman1-2/+2
Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-02usb: export firmware port location in sysfsBjørn Mork1-0/+10
The platform firmware "location" data is used to find port peer relationships. But firmware is an unreliable source, and there are real world examples of errors leading to missing or wrong peer relationships. Debugging this is currently hard. Exporting the location attribute makes it easier to spot mismatches between the firmware data and the real world. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02usb: hub: try old enumeration scheme first for high speed devicesZeng Tao1-1/+3
The new scheme is required just to support legacy low and full-speed devices. For high speed devices, it will slower the enumeration speed. So in this patch we try the "old" enumeration scheme first for high speed devices, and this is what Windows does since Windows 8. Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-30Merge 4.19-rc6 into usb-nextGreg Kroah-Hartman4-18/+39
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-28usb: core: added uevent for over-currentJon Flatley1-0/+36
After commit 1cbd53c8cd85 ("usb: core: introduce per-port over-current counters") usb ports expose a sysfs value 'over_current_count' to user space. This value on its own is not very useful as it requires manual polling. As a solution, fire a udev event from the usb hub device that specifies the values 'OVER_CURRENT_PORT' and 'OVER_CURRENT_COUNT' that indicate the path of the usb port where the over-current event occurred and the value of 'over_current_count' in sysfs. Additionally, call sysfs_notify() so the sysfs value supports poll(). Signed-off-by: Jon Flatley <jflat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: core: safely deal with the dynamic quirk listsHarry Pan1-1/+2
Applying dynamic usbcore quirks in early booting when the slab is not yet ready would cause kernel panic of null pointer dereference because the quirk_count has been counted as 1 while the quirk_list was failed to allocate. i.e., [ 1.044970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.044995] IP: [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 [ 1.045016] PGD 0 [ 1.045026] Oops: 0000 [#1] PREEMPT SMP [ 1.046986] gsmi: Log Shutdown Reason 0x03 [ 1.046995] Modules linked in: [ 1.047008] CPU: 0 PID: 81 Comm: kworker/0:3 Not tainted 4.4.154 #28 [ 1.047016] Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.27.0 12/04/2017 [ 1.047028] Workqueue: usb_hub_wq hub_event [ 1.047037] task: ffff88017a321c80 task.stack: ffff88017a384000 [ 1.047044] RIP: 0010:[<ffffffffb0953ec7>] [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 To tackle this odd, let's balance the quirk_count to 0 when the kcalloc call fails, and defer the quirk setting into a lower level callback which ensures that the kernel memory management has been initialized. Fixes: 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Harry Pan <harry.pan@intel.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usbcore: Select UAC3 configuration for audio if presentSaranya Gopal1-0/+27
USB audio class 3.0 specification introduced many significant changes like - new power domains, support for LPM/L1 - new cluster descriptor - new high capability and class-specific string descriptors - BADD profiles - ... and many other things (check spec from link below: http://www.usb.org/developers/docs/devclass_docs/USB_Audio_v3.0.zip) Now that UAC3 is supported in linux, choose UAC3 configuration for audio if the device supports it. Selecting this configuration will enable the system to save power by leveraging the new power domains and LPM L1 capability and also support new codec types and data formats for consumer audio applications. Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: handle NULL config in usb_find_alt_setting()Alan Stern1-0/+2
usb_find_alt_setting() takes a pointer to a struct usb_host_config as an argument; it searches for an interface with specified interface and alternate setting numbers in that config. However, it crashes if the usb_host_config pointer argument is NULL. Since this is a general-purpose routine, available for use in many places, we want to to be more robust. This patch makes it return NULL whenever the config argument is NULL. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+19c3aaef85a89d451eac@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: fix error handling in usb_driver_claim_interface()Alan Stern1-0/+15
The syzbot fuzzing project found a use-after-free bug in the USB core. The bug was caused by usbfs not unbinding from an interface when the USB device file was closed, which led another process to attempt the unbind later on, after the private data structure had been deallocated. The reason usbfs did not unbind the interface at the appropriate time was because it thought the interface had never been claimed in the first place. This was caused by the fact that usb_driver_claim_interface() does not clean up properly when device_bind_driver() returns an error. Although the error code gets passed back to the caller, the iface->dev.driver pointer remains set and iface->condition remains equal to USB_INTERFACE_BOUND. This patch adds proper error handling to usb_driver_claim_interface(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+f84aa7209ccec829536f@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: remove LPM management from usb_driver_claim_interface()Alan Stern1-15/+0
usb_driver_claim_interface() disables and re-enables Link Power Management, but it shouldn't do either one, for the reasons listed below. This patch removes the two LPM-related function calls from the routine. The reason for disabling LPM in the analogous function usb_probe_interface() is so that drivers won't have to deal with unwanted LPM transitions in their probe routine. But usb_driver_claim_interface() doesn't call the driver's probe routine (or any other callbacks), so that reason doesn't apply here. Furthermore, no driver other than usbfs will ever call usb_driver_claim_interface() unless it is already bound to another interface in the same device, which means disabling LPM here would be redundant. usbfs doesn't interact with LPM at all. Lastly, the error return from usb_unlocked_disable_lpm() isn't handled properly; the code doesn't clean up its earlier actions before returning. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 8306095fd2c1 ("USB: Disable USB 3.0 LPM in critical sections.") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: usbdevfs: restore warning for nonsensical flagsOliver Neukum1-0/+5
If we filter flags before they reach the core we need to generate our own warnings. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: usbdevfs: sanitize flags moreOliver Neukum1-3/+16
Requesting a ZERO_PACKET or not is sensible only for output. In the input direction the device decides. Likewise accepting short packets makes sense only for input. This allows operation with panic_on_warn without opening up a local DOS. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+843efa30c8821bd69f53@syzkaller.appspotmail.com Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-16Merge 4.19-rc4 into usb-nextGreg Kroah-Hartman4-28/+18
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-11usb: core: remove flags variable in __usb_hcd_giveback_urb()Sebastian Andrzej Siewior1-1/+0
In commit ed194d1367698 ("usb: core: remove local_irq_save() around ->complete() handler") I removed the only user of the flags variable and forgot to remove the variable, leading to warning because it is unused now. Remove the unused variable. Fixes: ed194d1367698 ("usb: core: remove local_irq_save() around ->complete() handler") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: Change usb_of_get_companion_dev() place to usb/commonYoshihiro Shimoda1-26/+0
Since renesas_usb3 udc driver calls usb_of_get_companion_dev() which is on usb/core/of.c, build error like below happens if we disable CONFIG_USB because the usb/core/ needs CONFIG_USB: ERROR: "usb_of_get_companion_dev" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined! According to the usb/gadget/Kconfig, "NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!". So, to fix the issue, this patch changes the usb_of_get_companion_dev() place from usb/core/of.c to usb/common/common.c to be called by both host and gadget. Reported-by: John Garry <john.garry@huawei.com> Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: core: phy: clean up return value check about devm_of_phy_get_by_index()Chunfeng Yun1-3/+4
Use IS_ERR() instead of IS_ERR_OR_NULL() because devm_of_phy_get_by_index() never return NULL value; But still need ignore the error of -ENODEV, for more information, please refer to: [0] https://lkml.org/lkml/2018/4/19/88 [1] https://patchwork.kernel.org/patch/10160181/ Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10USB: Removing NULL check for pool since dma_pool_destroy is safeSalil Kapur1-6/+2
Removing NULL check for pool since dma_pool_destroy is safe Signed-off-by: Salil Kapur <salilkapur93@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: core: remove local_irq_save() around ->complete() handlerSebastian Andrzej Siewior1-13/+0
The core disabled interrupts before invocation the ->complete handler because the handler might have expected that interrupts are disabled. All handlers were audited and use proper locking now. With it, the core code no longer needs to disable interrupts before invoking the ->complete handler. Remove local_irq_save() statement before invoking the ->complete handler. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()Mathias Nyman1-0/+11
The steps taken by usb core to set a new interface is very different from what is done on the xHC host side. xHC hardware will do everything in one go. One command is used to set up new endpoints, free old endpoints, check bandwidth, and run the new endpoints. All this is done by xHC when usb core asks the hcd to check for available bandwidth. At this point usb core has not yet flushed the old endpoints, which will cause use-after-free issues in xhci driver as queued URBs are cancelled on a re-allocated endpoint. To resolve this add a call to usb_disable_interface() which will flush the endpoints before calling usb_hcd_alloc_bandwidth() Additional checks in xhci driver will also be implemented to gracefully handle stale URB cancel on freed and re-allocated endpoints Cc: <stable@vger.kernel.org> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05usb: Don't die twice if PCI xhci host is not responding in resumeMathias Nyman1-2/+0
usb_hc_died() should only be called once, and with the primary HCD as parameter. It will mark both primary and secondary hcd's dead. Remove the extra call to usb_cd_died with the shared hcd as parameter. Fixes: ff9d78b36f76 ("USB: Set usb_hcd->state and flags for shared roothubs") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05USB: Add quirk to support DJI CineSSDTim Anderson1-0/+3
This device does not correctly handle the LPM operations. Also, the device cannot handle ATA pass-through commands and locks up when attempted while running in super speed. This patch adds the equivalent quirk logic as found in uas. Signed-off-by: Tim Anderson <tsa@biglakesoftware.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controllerMaxence Duprès1-0/+4
WORLDE Controller KS49 or Prodipe MIDI 49C USB controller cause a -EPROTO error, a communication restart and loop again. This issue has already been fixed for KS25. https://lore.kernel.org/patchwork/patch/753077/ I just add device 201 for KS49 in quirks.c to get it works. Signed-off-by: Laurent Roux <xpros64@hotmail.fr> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-18Merge tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds3-6/+50
Pull USB/PHY updates from Greg KH: "Here is the big USB and phy driver patch set for 4.19-rc1. Nothing huge but there was a lot of work that happened this development cycle: - lots of type-c work, with drivers graduating out of staging, and displayport support being added. - new PHY drivers - the normal collection of gadget driver updates and fixes - code churn to work on the urb handling path, using irqsave() everywhere in anticipation of making this codepath a lot simpler in the future. - usbserial driver fixes and reworks - other misc changes All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: serial: pl2303: add a new device id for ATEN usb: renesas_usbhs: Kconfig: convert to SPDX identifiers usb: dwc3: gadget: Check MaxPacketSize from descriptor usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms usb: dwc2: Turn on uframe_sched on "amlogic" platforms usb: dwc2: Turn on uframe_sched on "his" platforms usb: dwc2: Turn on uframe_sched on "bcm" platforms usb: dwc2: gadget: ISOC's starting flow improvement usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic. usb: dwc3: core: Enable AutoRetry feature in the controller usb: dwc3: Set default mode for dwc_usb31 usb: gadget: udc: renesas_usb3: Add register of usb role switch usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep usb: dwc2: Modify dwc2_readl/writel functions prototype usb: dwc3: pci: Intel Merrifield can be host usb: dwc3: pci: Supply device properties via driver data arm64: dts: dwc3: description of incr burst type usb: dwc3: Enable undefined length INCR burst type usb: dwc3: add global soc bus configuration reg0 usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci ...
2018-08-14Merge tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds1-21/+13
Pull LED updates from Jacek Anaszewski: "LED triggers improvements make the biggest part of this pull request. The most striking ones, that allowed for nice cleanups in the triggers are: - centralized handling of creation and removal of trigger sysfs attributes via attribute group - addition of module_led_trigger() helper The other things that need to be mentioned: New features and improvements to existing LED class drivers: - lt3593: add DT support, switch to gpiod interface - lm3692x: support LED sync configuration, change OF calls to fwnode calls - apu: modify PC Engines apu/apu2 driver to support apu3 Change in the drivers/net/can/led.c: - mark led trigger as broken since it's in the way for the further cleanups. It implements a subset of the netdev trigger and an Ack is needed from someone who can actually test and confirm that the netdev trigger works for can devices" * tag 'leds-for-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (32 commits) leds: ns2: Change unsigned to unsigned int usb: simplify usbport trigger leds: gpio trigger: simplifications from core changes leds: backlight trigger: simplifications from core changes leds: activity trigger: simplifications from core changes leds: default-on trigger: make use of module_led_trigger() leds: heartbeat trigger: simplifications from core changes leds: oneshot trigger: simplifications from core changes leds: transient trigger: simplifications from core changes leds: timer trigger: simplifications from core changes leds: netdev trigger: simplifications from core changes leds: triggers: new function led_set_trigger_data() leds: triggers: define module_led_trigger helper leds: triggers: handle .trigger_data and .activated() in the core leds: triggers: add device attribute support leds: triggers: let struct led_trigger::activate() return an error code leds: triggers: make the MODULE_LICENSE string match the actual license leds: lm3692x: Support LED sync configuration dt: bindings: lm3692x: Update binding for LED sync control leds: lm3692x: Change DT calls to fwnode calls ...
2018-07-30Merge 4.18-rc7 into usb-nextGreg Kroah-Hartman1-2/+6
We want the USB fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21usb: core: handle hub C_PORT_OVER_CURRENT conditionBin Liu1-2/+6
Based on USB2.0 Spec Section 11.12.5, "If a hub has per-port power switching and per-port current limiting, an over-current on one port may still cause the power on another port to fall below specific minimums. In this case, the affected port is placed in the Power-Off state and C_PORT_OVER_CURRENT is set for the port, but PORT_OVER_CURRENT is not set." so let's check C_PORT_OVER_CURRENT too for over current condition. Fixes: 08d1dec6f405 ("usb:hub set hub->change_bits when over-current happens") Cc: <stable@vger.kernel.org> Tested-by: Alessandro Antenucci <antenucci@korg.it> Signed-off-by: Bin Liu <b-liu@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16Merge 4.18-rc5 into usb-nextGreg Kroah-Hartman1-0/+4
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06usb: quirks: add delay quirks for Corsair StrafeNico Sneck1-0/+4
Corsair Strafe appears to suffer from the same issues as the Corsair Strafe RGB. Apply the same quirks (control message delay and init delay) that the RGB version has to 1b1c:1b15. With these quirks in place the keyboard works correctly upon booting the system, and no longer requires reattaching the device. Signed-off-by: Nico Sneck <snecknico@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-05usb: simplify usbport triggerUwe Kleine-König1-20/+11
The led trigger core learned a few things that allow to simplify the trigger drivers. Make use of automated trigger attributes and error checking of the activate callback. Also use the wrappers to set and get trigger_data. Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05leds: triggers: let struct led_trigger::activate() return an error codeUwe Kleine-König1-3/+4
Given that activating a trigger can fail, let the callback return an indication. This prevents to have a trigger active according to the "trigger" sysfs attribute but not functional. All users are changed accordingly to return 0 for now. There is no intended change in behaviour. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-28usb: usbfs: use irqsave() in USB's complete callbackSebastian Andrzej Siewior1-2/+3
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-28usb: core: use irqsave() in sg_complete() complete callbackSebastian Andrzej Siewior1-4/+5
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-25USB: Report wakeup events on root-hub portsAlan Stern1-0/+42
When a USB device attached to a root-hub port sends a wakeup request to a sleeping system, we do not report the wakeup event to the PM core. This is because a system resume involves waking up all suspended USB ports as quickly as possible; without the normal USB_RESUME_TIMEOUT delay, the host controller driver doesn't set the USB_PORT_STAT_C_SUSPEND flag and so usb_port_resume() doesn't realize that a wakeup request was received. However, some environments (such as Chrome OS) want to have all wakeup events reported so they can be ascribed to the appropriate device. To accommodate these environments, this patch adds a new routine to the hub driver and a corresponding new HCD method to be used when a root hub resumes. The HCD method returns a bitmap of ports that have initiated a wakeup signal but not yet completed resuming. The hub driver can then report to the PM core that the child devices attached to these ports initiated a wakeup event. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook2-6/+7
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05Merge tag 'driver-core-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds1-0/+1
Pull driver core updates from Greg KH: "Here is the driver core patchset for 4.18-rc1. The large chunk of these are firmware core documentation and api updates. Nothing major there, just better descriptions for others to be able to understand the firmware code better. There's also a user for a new firmware api call. Other than that, there are some minor updates for debugfs, kernfs, and the driver core itself. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits) driver core: hold dev's parent lock when needed driver-core: return EINVAL error instead of BUG_ON() driver core: add __printf verification to device_create_groups_vargs mm: memory_hotplug: use put_device() if device_register fail base: core: fix typo 'can by' to 'can be' debugfs: inode: debugfs_create_dir uses mode permission from parent debugfs: Re-use kstrtobool_from_user() Documentation: clarify firmware_class provenance and why we can't rename the module Documentation: remove stale firmware API reference Documentation: fix few typos and clarifications for the firmware loader ath10k: re-enable the firmware fallback mechanism for testmode ath10k: use firmware_request_nowarn() to load firmware firmware: add firmware_request_nowarn() - load firmware without warnings firmware_loader: make firmware_fallback_sysfs() print more useful firmware_loader: move kconfig FW_LOADER entries to its own file firmware_loader: replace ---help--- with help firmware_loader: enhance Kconfig documentation over FW_LOADER firmware_loader: document firmware_sysfs_fallback() firmware: rename fw_sysfs_fallback to firmware_fallback_sysfs() firmware: use () to terminate kernel-doc function names ...
2018-05-31USB: core: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-21/+5
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Johan Hovold <johan@kernel.org> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31usb: hub: Per-port setting to reduce TRSTRCY to 10 msNicolas Boichat1-1/+5
Currently, the USB hub core waits for 50 ms after enumerating the device. This was added to help "some high speed devices" to enumerate (b789696af8 "[PATCH] USB: relax usbcore reset timings"). On some devices, the time-to-active is important, so we provide a per-port option to reduce the time to what the USB specification requires: 10 ms. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31usb: hub: Per-port setting to use old enumeration schemeNicolas Boichat3-4/+33
The "old" enumeration scheme is considerably faster (it takes ~244ms instead of ~356ms to get the descriptor). It is currently only possible to use the old scheme globally (/sys/module/usbcore/parameters/old_scheme_first), which is not desirable as the new scheme was introduced to increase compatibility with more devices. However, in our case, we care about time-to-active for a specific USB device (which we make the firmware for), on a specific port (that is pogo-pin based: not a standard USB port). This new sysfs option makes it possible to use the old scheme on a single port only. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-31usb: core: message: remove extra endianness conversion in usb_set_isoch_delayRuslan Bilovol1-1/+1
No need to do extra endianness conversion in usb_set_isoch_delay because it is already done in usb_control_msg() Fixes: 886ee36e7205 ("usb: core: add support for USB_REQ_SET_ISOCH_DELAY") Cc: Dmytro Panchenko <dmytro.panchenko@globallogic.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: stable <stable@vger.kernel.org> # v4.16+ Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.