aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc2 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-05usb: dwc2: disable power_down on rockchip devicesSolidHal1-0/+1
The bug would let the usb controller enter partial power down, which was formally known as hibernate, upon boot if nothing was plugged in to the port. Partial power down couldn't be exited properly, so any usb devices plugged in after boot would not be usable. Before the name change, params.hibernation was false by default, so _dwc2_hcd_suspend() would skip entering hibernation. With the rename, _dwc2_hcd_suspend() was changed to use params.power_down to decide whether or not to enter partial power down. Since params.power_down is non-zero by default, it needs to be set to 0 for rockchip devices to restore functionality. This bug was reported in the linux-usb thread: REGRESSION: usb: dwc2: USB device not seen after boot The commit that caused this regression is: 6d23ee9caa6790aea047f9aca7f3c03cb8d96eb6 Signed-off-by: SolidHal <hal@halemmerich.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: gadget: Add handler for WkupAlert interruptGrigor Tovmasyan1-0/+25
Added interrupt handler for WkupAlert interrupt. This interrupt should initiate Remote Wake up. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: gadget: enable WKUP_ALERT interruptGrigor Tovmasyan1-0/+4
WKUP_ALERT interrupt should be unmask when lpm mode is enabled. This interrupt is asserted when the device is in L1 for the duration mentioned in GREFCLK.SOF_CNN_WKUP_ALERT. This is used to alert SW to initiate Remote wake up so that the device resumes in time in order not to lose sync with the host frame number. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: gadget: Program GREFCLK registerGrigor Tovmasyan2-0/+25
Added dwc2_gadget_program_ref_clk function to program GREFCLK register in device mode. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: gadget: Add parameters for GREFCLK registerGrigor Tovmasyan2-0/+20
Added ref_clk_per and sof_cnt_wkup_alert parameters in dwc2_core_params struct and set default values. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: Add definitions for new registersGrigor Tovmasyan1-0/+13
New registers were added to dwc otg core. GREFCLK - This register used to control ref_clk parameters. GINTSTS2 - New WKUP_ALERT interrupt was added. GINTMSK2 - Mask register for GINTSTS2. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: Update target (u)frame calculationGrigor Tovmasyan1-0/+17
In service interval based scheduling target (u)frame must be set as a last frame in this the service interval. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: Add dwc2_gadget_dec_frame_num_by_one() functionGrigor Tovmasyan1-0/+18
Added dwc2_gadget_dec_frame_num_by_one() function in gadget.c. This function will be used to calculate descriptor frame number field value. For service interval mode frame number in descriptor should point to last (u)frame in the interval. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: Add core parameter for service interval supportGrigor Tovmasyan4-0/+18
Added core parameter for service interval based scheduling. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: Update registers definitions to support service intervalGrigor Tovmasyan1-0/+2
Added GHWCFG4_SERVICE_INTERVAL_SUPPORTED and DCTL_SERVICE_INTERVAL_SUPPORTED bits definitions to support service interval based scheduling. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: fix unbalanced use of external vbus-supplyFabrice Gasnier1-7/+26
When using external vbus supply regulator, it should be enabled synchronously with PWR bit in HPRT register. This also fixes unbalanced use of this optional regulator (This can be reproduced easily when unbinding the driver). Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: fix call to vbus supply exit routine, call it unlockedFabrice Gasnier1-0/+2
dwc2_vbus_supply_exit() may call regulator_disable(). It shouldn't be called with interrupts disabled as it might sleep. This is seen with DEBUG_ATOMIC_SLEEP=y. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: fix a race with external vbus supplyFabrice Gasnier1-1/+9
There's a race with root hub resume, when using external vbus supply. Root hub gets resumed, but runtime pm autosuspend runs as external vbus supply isn't enabled. So, host never exit from power down properly. Initialize vbus external supply before, rater that after hub resume. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: get optional vbus-supply regulator onceFabrice Gasnier2-9/+11
Move devm_regulator_get_optional() call to probe routine. This avoids 'vbus-supply' regulator to be requested lots of times, upon each call to dwc2_vbus_supply_init(), e.g. like with runtime pm. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: Disable all EP's on disconnectMinas Harutyunyan1-7/+23
Disabling all EP's allow to reset EP's to initial state. On disconnect disable all EP's instead of just killing all requests. Because of some platform didn't catch disconnect event, same stuff added to dwc2_hsotg_core_init_disconnected() function when USB reset detected on the bus. Changed from version 1: Changed lock acquire flow in dwc2_hsotg_ep_disable() function. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: remove set but unused variableJosh Abraham1-3/+0
This patch removes a set but unused variable in hcd.c. Fixes gcc warning: variable ‘data_fifo’ set but not used [-Wunused-but-set-variable] Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Joshua Abraham <j.abraham1776@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-09-05usb: dwc2: Fix call location of dwc2_check_core_endiannessBruno Meirelles Herrera1-2/+2
Some SoC/IP as STM32F469, the snpsid can only be read after clock is enabled, otherwise it will read as 0, and the dwc2_check_core_endianness will assume the core and AHB have opposite endianness, leading to the following error: [ 1.976339] dwc2 50000000.usb: 50000000.usb supply vusb_d not found, using dummy regulator [ 1.986124] dwc2 50000000.usb: Linked as a consumer to regulator.0 [ 1.992711] dwc2 50000000.usb: 50000000.usb supply vusb_a not found, using dummy regulator [ 2.003672] dwc2 50000000.usb: dwc2_core_reset: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE [ 2.015176] dwc2: probe of 50000000.usb failed with error -16 The proposed patch changes the location where dwc2_check_core_endianness is called, allowing the clock peripheral to be enabled first. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Bruno Meirelles Herrera <bmh@certi.org.br> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30Merge tag 'usb-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-nextGreg Kroah-Hartman12-843/+839
Felipe writes: usb: changes for v4.19 Not a big pull request with only 37 non-merge commits, most of which are touching dwc2 (74% of the changes). The most important changes are dwc2's support for uframe scheduling and its endian-agnostic readl/writel wrappers. From dwc3 side we have a special new glue layer for Synopsys HAPS which will help Synopsys running FPGA validation using our upstream driver. We also have the beginnings of dual-role support for Intel Merrifield platform. Apart from these, just a series of non-critical changes.
2018-07-30usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platformsDouglas Anderson1-1/+0
There's no reason to have the uframe scheduler off on dwc2. Running with uframe_sched = False is equivalent to saying "I don't want to run the correct code, I want to run the old and incorrect code". The uframe scheduler has been off on stm32f4x9_fsotg since commit e35b135055e2 ("usb: dwc2: Add support for STM32F429/439/469 USB OTG HS/FS in FS mode (internal PHY)"). That commit is pretty recent, so it's unclear to me why the uframe scheduler was left off. Hopefully it's because someone copied it from other parameters and didn't think to try it? Presumably if everyone is good w/ the uframe_sched turned back on we can kill all the old and crufty non-uframe sched code. Reviewed-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: dwc2: Turn on uframe_sched on "amlogic" platformsDouglas Anderson1-1/+0
There's no reason to have the uframe scheduler off on dwc2. Running with uframe_sched = False is equivalent to saying "I don't want to run the correct code, I want to run the old and incorrect code". The uframe scheduler has been off on Amlogic since commit f94310ac076e ("usb: dwc2: add support for Meson8b and GXBB SoCs"). While this was after most of the recent improvements, notably the commit 9f9f09b048f5 ("usb: dwc2: host: Totally redo the microframe scheduler"), presumably the parameters were copied from another platform and the uframe scheduler wasn't tried. Presumably if everyone is good w/ the uframe_sched turned back on we can kill all the old and crufty non-uframe sched code. Reviewed-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: dwc2: Turn on uframe_sched on "his" platformsDouglas Anderson1-1/+0
There's no reason to have the uframe scheduler off on dwc2. Running with uframe_sched = False is equivalent to saying "I don't want to run the correct code, I want to run the old and incorrect code". The uframe scheduler has been off on HiSilicon since commit 37dd9d65cc41 ("usb: dwc2: add support of hi6220"). Since then there have been many many improvements, notably the commit 9f9f09b048f5 ("usb: dwc2: host: Totally redo the microframe scheduler") Presumably if everyone is good w/ the uframe_sched turned back on we can kill all the old and crufty non-uframe sched code. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: dwc2: Turn on uframe_sched on "bcm" platformsDouglas Anderson1-1/+0
There's no reason to have the uframe scheduler off on dwc2. Running with uframe_sched = False is equivalent to saying "I don't want to run the correct code, I want to run the old and incorrect code". The uframe scheduler has been off on Broadcom since commit 58b179dcf28c ("staging: dwc2: disable uframe_sched on the bcm2835"). Since then there have been many many improvements, notably the commit 9f9f09b048f5 ("usb: dwc2: host: Totally redo the microframe scheduler") Presumably if everyone is good w/ the uframe_sched turned back on we can kill all the old and crufty non-uframe sched code. Reviewed-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: dwc2: gadget: ISOC's starting flow improvementMinas Harutyunyan1-15/+4
To start ISOC transfers in handlers dwc2_gadget_handle_nak() and dwc2_gadget_handle_out_token_ep_disabled() driver reads current frame number, based on which, set target frame number to start first ISOC transfer. In case if system's high IRQ latency and multiple EP's asserted interrupt in same frame, there are high probability that when reading current frame number in EP's handlers, actual frame number can be increased. As result for bInterval > 1, starting target frame will be set wrongly and all ISOC packets will be dropped. In patch "usb: dwc2: Change reading of current frame number flow" reading of current frame number done ASAP in common interrupt handler. This frame number stored in frame_number variable which used as starting frame number for ISOC EP's in above mentioned handlers. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.Gevorg Sahakyan2-2/+32
Declared dwc2_check_core_endianness() function for dynamicly check core endianness. Added needs_byte_swap flag to hsotg structure, and depending on flag swap value inside dwc2_readl/writel functions. Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_repGevorg Sahakyan2-41/+26
dwc2_readl_rep/dwc2_writel_rep functions using readl/writel in a loop. Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: dwc2: Modify dwc2_readl/writel functions prototypeGevorg Sahakyan11-780/+776
Added hsotg argument to dwc2_readl/writel function prototype, and also instead of address pass offset of register. hsotg will contain flag field for endianness. Also customized dwc2_set_bit and dwc2_clear_bit function for dwc2_readl/writel functions. Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-26usb: dwc2: Move dwc2_readl/writel functions after hsotg structureGevorg Sahakyan1-54/+54
Moved dwc2_readl/writel functions after hsotg declaration for adding hsotg structure to dwc2_readl/writel function prototypes. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: dwc2: Fix inefficient copy of unaligned buffersAntti Seppälä1-3/+9
Make sure only to copy any actual data rather than the whole buffer, when releasing the temporary buffer used for unaligned non-isochronous transfers. Taken directly from commit 0efd937e27d5e ("USB: ehci-tegra: fix inefficient copy of unaligned buffers") Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM) Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: dwc2: Fix DMA alignment to start at allocated boundaryAntti Seppälä1-21/+23
The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") introduced a common way to align DMA allocations. The code in the commit aligns the struct dma_aligned_buffer but the actual DMA address pointed by data[0] gets aligned to an offset from the allocated boundary by the kmalloc_ptr and the old_xfer_buffer pointers. This is against the recommendation in Documentation/DMA-API.txt which states: Therefore, it is recommended that driver writers who don't take special care to determine the cache line size at run time only map virtual regions that begin and end on page boundaries (which are guaranteed also to be cache line boundaries). The effect of this is that architectures with non-coherent DMA caches may run into memory corruption or kernel crashes with Unhandled kernel unaligned accesses exceptions. Fix the alignment by positioning the DMA area in front of the allocation and use memory at the end of the area for storing the orginal transfer_buffer pointer. This may have the added benefit of increased performance as the DMA area is now fully aligned on all architectures. Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM). Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") Cc: <stable@vger.kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: dwc2: avoid NULL dereferencesJohn Keeping1-3/+3
For unidirectional endpoints, the endpoint pointer will be NULL for the unused direction. Check that the endpoint is active before dereferencing this pointer. Fixes: 1b4977c793d3 ("usb: dwc2: Update dwc2_handle_incomplete_isoc_in() function") Fixes: 689efb2619b5 ("usb: dwc2: Update dwc2_handle_incomplete_isoc_out() function") Fixes: d84845522d93 ("usb: dwc2: Update GINTSTS_GOUTNAKEFF interrupt handling") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-17usb: dwc2: host: do not delay retries for CONTROL IN transfersDmitry Torokhov1-2/+7
When handling split transactions we will try to delay retry after getting a NAK from the device. This works well for BULK transfers that can be polled for essentially forever. Unfortunately, on slower systems at boot time, when the kernel is busy enumerating all the devices (USB or not), we issue a bunch of control requests (reading device descriptors, etc). If we get a NAK for the IN part of the control request and delay retry for too long (because the system is busy), we may confuse the device when we finally get to reissue SSPLIT/CSPLIT IN and the device will respond with STALL. As a result we end up with failure to get device descriptor and will fail to enumerate the device: [ 3.428801] usb 2-1.2.1: new full-speed USB device number 9 using dwc2 [ 3.508576] usb 2-1.2.1: device descriptor read/8, error -32 [ 3.699150] usb 2-1.2.1: device descriptor read/8, error -32 [ 3.891653] usb 2-1.2.1: new full-speed USB device number 10 using dwc2 [ 3.968859] usb 2-1.2.1: device descriptor read/8, error -32 ... Let's not delay retries of split CONTROL IN transfers, as this allows us to reliably enumerate devices at boot time. Fixes: 38d2b5fb75c1 ("usb: dwc2: host: Don't retry NAKed transactions right away") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-19dwc2: gadget: Fix ISOC IN DDMA PID bitfield value calculationMinas Harutyunyan1-1/+6
PID bitfield in descriptor should be set based on particular request length, not based on EP's mc value. PID value can't be set to 0 even request length is 0. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-19usb: gadget: dwc2: fix memory leak in gadget_init()Grigor Tovmasyan1-2/+5
Freed allocated request for ep0 to prevent memory leak in case when dwc2_driver_probe() failed. Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-19usb: dwc2: fix isoc split in transfer with no dataWilliam Wu1-2/+1
If isoc split in transfer with no data (the length of DATA0 packet is zero), we can't simply return immediately. Because the DATA0 can be the first transaction or the second transaction for the isoc split in transaction. If the DATA0 packet with no data is in the first transaction, we can return immediately. But if the DATA0 packet with no data is in the second transaction of isoc split in transaction sequence, we need to increase the qtd->isoc_frame_index and giveback urb to device driver if needed, otherwise, the MDATA packet will be lost. A typical test case is that connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. In the case, the isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet (176 bytes) - CSPLIT IN transaction - DATA0 packet (0 byte) This patch use both the length of DATA0 and qtd->isoc_split_offset to check if the DATA0 is in the second transaction. Tested-by: Gevorg Sahakyan <sahakyan@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-19usb: dwc2: alloc dma aligned buffer for isoc split inWilliam Wu5-5/+106
The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") rips out a lot of code to simply the allocation of aligned DMA. However, it also introduces a new issue when use isoc split in transfer. In my test case, I connect the dwc2 controller with an usb hs Hub (GL852G-12), and plug an usb fs audio device (Plantronics headset) into the downstream port of Hub. Then use the usb mic to record, we can find noise when playback. It's because that the usb Hub uses an MDATA for the first transaction and a DATA0 for the second transaction for the isoc split in transaction. An typical isoc split in transaction sequence like this: - SSPLIT IN transaction - CSPLIT IN transaction - MDATA packet - CSPLIT IN transaction - DATA0 packet The DMA address of MDATA (urb->dma) is always DWORD-aligned, but the DMA address of DATA0 (urb->dma + qtd->isoc_split_offset) may not be DWORD-aligned, it depends on the qtd->isoc_split_offset (the length of MDATA). In my test case, the length of MDATA is usually unaligned, this cause DATA0 packet transmission error. This patch use kmem_cache to allocate aligned DMA buf for isoc split in transaction. Note that according to usb 2.0 spec, the maximum data payload size is 1023 bytes for each fs isoc ep, and the maximum allowable interrupt data payload size is 64 bytes or less for fs interrupt ep. So we set the size of object to be 1024 bytes in the kmem cache. Tested-by: Gevorg Sahakyan <sahakyan@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu <william.wu@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-19usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hubWilliam Wu1-1/+1
The dwc2_get_ls_map() use ttport to reference into the bitmap if we're on a multi_tt hub. But the bitmaps index from 0 to (hub->maxchild - 1), while the ttport index from 1 to hub->maxchild. This will cause invalid memory access when the number of ttport is hub->maxchild. Without this patch, I can easily meet a Kernel panic issue if connect a low-speed USB mouse with the max port of FE2.1 multi-tt hub (1a40:0201) on rk3288 platform. Fixes: 9f9f09b048f5 ("usb: dwc2: host: Totally redo the microframe scheduler") Cc: <stable@vger.kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-19usb: dwc2: Fix host exit from hibernation flow.Artur Petrosyan1-1/+3
In case when a hub is connected to DWC2 host auto suspend occurs and host goes to hibernation. When any device connected to hub host hibernation exiting incorrectly. - Added dwc2_hcd_rem_wakeup() function call to exit from suspend state by remote wakeup. - Increase timeout value for port suspend bit to be set. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-18usb: dwc2: gadget: fix packet drop issue for ISOC OUT transfersMinas Harutyunyan1-2/+0
In ISOC OUT transfer, when the OUT token received while EP disabled, we shouldn't complete a usb request. The current flow completed one usb request, this will lead to a packet drop to function driver. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-18usb: dwc2: gadget: fix packet drop issue in dwc2_gadget_handle_nakZeng Tao1-3/+0
In ISOC transfer, when the NAK interrupt happens, we shouldn't complete a usb request, the current flow will complete one usb request with no hardware transfer, this will lead to a packet drop on the usb bus. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-18usb: dwc2: gadget: Fix issue in dwc2_gadget_start_isoc()Minas Harutyunyan1-0/+1
In case of requests queue is empty reset EP target_frame to initial value. This allow restarting ISOC traffic in case when function driver queued requests with interruptions. Tested-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-5/+6
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-31USB: dwc2: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-62/+16
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-21usb: dwc2: gadget: Fix coverity issueGrigor Tovmasyan1-1/+1
When _param is unsigned and the minimum value of range is 0, it gives the following warning: COVERITY NO_EFFECT: This less-than-zero comparison of an unsigned value is never true. Converting ._param to int to avoid this warning. Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: pci: Fix error return code in dwc2_pci_probe()Wei Yongjun1-1/+3
Fix to return error code -ENOMEM from the alloc fail error handling case instead of 0, as done elsewhere in this function. Fixes: ecd29dabb2ba ("usb: dwc2: pci: Handle error cleanup in probe") Reviewed-by: Grigor Tovmasyan <tovmasya@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: WA for Full speed ISOC IN in DDMA mode.Artur Petrosyan2-0/+23
By clearing NAK status of EP, core will send ZLP to IN token and assert NAK interrupt relying on TxFIFO status only. The WA applies only to core versions from 2.72a to 4.00a (including both). Also for FS_IOT_1.00a and HS_IOT_1.00a. Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: dwc2_vbus_supply_init: fix error checkTomeu Vizoso1-5/+8
devm_regulator_get_optional returns -ENODEV if the regulator isn't there, so if that's the case we have to make sure not to leave -ENODEV in the regulator pointer. Also, make sure we return 0 in that case, but correctly propagate any other errors. Also propagate the error from _dwc2_hcd_start. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Cc: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Grigor Tovmasyan <tovmasya@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: Fix HiKey regression caused by power_down featureJohn Stultz1-0/+1
In 4.17-rc, commit 03ea6d6e9e1f ("usb: dwc2: Enable power down") caused the HiKey board to not correctly handle switching between usb-gadget and usb-host mode. Unplugging the OTG port would result in: [ 42.240973] dwc2 f72c0000.usb: dwc2_restore_host_registers: no host registers to restore [ 42.249066] dwc2 f72c0000.usb: dwc2_host_exit_hibernation: failed to restore host registers And the USB-host ports would not function. And plugging in the OTG port, we would see: [ 46.046557] WARNING: CPU: 3 PID: 6 at drivers/usb/dwc2/gadget.c:260 dwc2_hsotg_init_fifo+0x194/0x1a0 [ 46.055761] CPU: 3 PID: 6 Comm: kworker/u16:0 Not tainted 4.17.0-rc5-00030-ge67da8c #231 [ 46.055767] Hardware name: HiKey Development Board (DT) [ 46.055784] Workqueue: dwc2 dwc2_conn_id_status_change ... Thus, this patch sets the hisi params to disable the power_down flag by default, and gets thing working again. Cc: John Youn <johnyoun@synopsys.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Artur Petrosyan <arturp@synopsys.com> Cc: Grigor Tovmasyan <tovmasya@synopsys.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: linux-usb@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-21usb: dwc2: Fix kernel doc's warnings.Grigor Tovmasyan12-61/+215
Added descriptions for all not described parameters. Fix all kernel doc's warnings. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: dwc2: Change reading of current frame number flow.Artur Petrosyan3-5/+23
The current frame_number is read from core for both device and host modes. Reading of the current frame number needs to be performed ASAP due to IRQ latency's. This is why, it is moved to common interrupt handler. Accordingly updated dwc2_gadget_target_frame_elapsed() function which uses stored frame_number instead of reading frame number. In cases when target frame value is incremented the frame_number is required to read again. Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-05-15usb: dwc2: debugfs: Don't touch RX FIFO during register dumpStefan Wahren1-1/+1
Dumping the registers via debugfs makes USB on Raspberry Pi completely unusable. The read of register GRXSTSP ("Receive Status Read and Pop Register") is responsible for this behaviour, because it pops the RX FIFO. So avoid this by omitting the relevant register. CC: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Fixes: 563cf017c443 ("usb: dwc2: debugfs: add support for complete register dump") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.