aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-08-12Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-5/+5
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mmc_spi: Fix unterminated of_match_table of/sparc: fix build regression from of_device changes of/device: Replace struct of_device with struct platform_device
2010-08-10USB: gadget: file_storage: serial parameter even if not test modeMichal Nazarewicz1-9/+11
Moved the serial parameter handling code out of "#ifdef CONFIG_USB_FILE_STORAGE_TEST". This modifies Yann Cantin's commit "USB: Add a serial number parameter to g_file_storage" module as per Alan Stern's request. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Anand Gadiyar <gadiyar@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Yann Cantin <yann.cantin@laposte.net>
2010-08-10USB: s3c-hsotg: add support for clock gatingMarek Szyprowski1-3/+17
This patch adds support for clock gating of the HS/OTG block. On S5PV210 otg gating clock is initally disabled so the driver needs to get and enable it before it can access its registers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: modify only selected bits in S3C_PHYPWR registerMarek Szyprowski1-2/+4
S5PV210 SoCs has 2 USB PHY interfaces, both enabled by writing zero to S3C_PHYPWR register. HS/OTG driver uses only PHY0, so do not touch bits related to PHY1. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: fix compilation problemMarek Szyprowski1-0/+1
drivers/usb/gadget/s3c-hsotg.c: In function ‘s3c_hsotg_otgreset’: drivers/usb/gadget/s3c-hsotg.c:2816: error: ‘MHZ’ undeclared (first use in this function) drivers/usb/gadget/s3c-hsotg.c:2816: error: (Each undeclared identifier is reported only once drivers/usb/gadget/s3c-hsotg.c:2816: error: for each function it appears in.) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Add support for external USB clockMaurus Cuelenaere1-0/+19
The PLL that drives the USB clock supports 3 input clocks: 12, 24 and 48Mhz. This patch adds support to the USB driver for setting the correct register bit according to the given clock. This depends on the following patch: [PATCH] ARM: S3C64XX: Add USB external clock definition Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Fix OUT packet request retryBen Dooks1-7/+11
If there is more data in the request than we could fit into a single hardware request, then check when the OutDone event is received if we have more data, and if so, schedule the new data instead of trying to complete the request (and in the case of EP0, sending a 0 packet in the middle of a transfer). Also, move the debug message about the current transfer state before the warning about a bad transfer. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Fix the OUT EP0 limitBen Dooks1-2/+1
The EP0 out limit is the same as the IN limit, so make them the same. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Fix max EP0 IN request lengthBen Dooks1-2/+1
The maximum length for any EP0 IN request on EP0 is 127 bytes, not 128 as the driver currently has it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Check for new request before enqueing new setupBen Dooks1-1/+1
Before trying a new setup transaction after getting an EP0 in complete interrupt, check that the driver did not try and send more EP0 IN data before enqueing a new setup transaction. This fixes a bug where we cannot send all of the IN data in one go so split the transfer, but then fail to send all the data as we start waiting for a new OUT transaction Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Only load packet per fifo writeBen Dooks1-0/+11
Limit the IN FIFO write to a single packet per attempt at writing, as per the specifications and ensure that we don't return fifo-full so that we can continue writing packets if we have the space. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Add initial detection and setup for dedicated FIFO modeBen Dooks1-2/+38
Add support for the dedicated FIFO mode on newer SoCs such as the S5PV210 partly to improve support and to fix the bug where any non-EP0 IN endpoint requires its own FIFO allocation. To fix this, we ensure that any non-zero IN endpoint is given a TXFIFO using the same allocation method as the periodic case (all our current hardware has enough FIFOs and FIFO memory for a 1:1 mapping) and ensure that the necessary transmission done interrupt is enabled. The default settings from reset for the core point all EPs at FIFO0, used for the control endpoint. However, the controller documentation states that all IN endpoints _must_ have a unique FIFO to avoid any contention during transmission. Note, this leaves us with a large IN FIFO for EP0 (which re-uses the old NPTXFIFO) for an endpoint which cannot shift more than a pair of packets at a time... this is a waste, but it looks like we cannot re-allocate space to the individual IN FIFOs as they are already maxed out (to be confirmed). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Re-initialise all FIFOs on USB bus resetBen Dooks1-9/+4
The USB documentation suggest that the FIFOs should be reset when a bus reset event happens. Use the s3c_hsotg_init_fifo() to ensure that the FIFO layout is correct and that the FIFOs are flushed before acknowledging the reset. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Avoid overwriting contents of perodic in 'fifo'Ben Dooks1-1/+11
In shared fifo mode (used on older SoCs) the periodic in fifo beahves much more like a packet buffer, discarding old data when writing new data. Avoid this by ensuring that we do not load new transactions in when there is data sitting already in the FIFO. Note, this may not be an observed bug, we are fixing the case that this may happen. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: The NPTX/PTX FIFO sizes are in words, not bytesBen Dooks1-1/+2
Fix a problem where we have been underestimating the space available in the IN PTX/NPTX FIFOs by assuming that they where simply word aligned instead of in number-of-words. This means all length calculations need to be multiplied-by-4. Note, we do not change the information about fifo size or start addresses available to userspace as we assume the user can multiply by four easily and is already knows these values are in words. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: s3c-hsotg: Increase TX fifo limitBen Dooks1-2/+2
Up the FIFO size for the TX to 1024 entries, as this now seems to work with all the cores. This fixes a problem when using large packets on a core with MPS set to 512 can hang due to insufficient space for the writes. The hang arises due to getting the non-periodic FIFO empty IRQ but not being able to satisfy any requests since there is never enough space to write 512 bytes into the buffer. This means we end up with a stream of interrupt requests. It is easier to up the TX FIFO to fill the space we left for it than to try and fix the positions in the code where we should have limited the max-packet size to < TXFIFOSIZE, since the TXFIFOSIZE depends on how the TX FIFOs have been setup. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: storage: optional SCSI WRITE FUA bitAndy Shevchenko2-7/+52
MS Windows mounts removable storage in "Removal optimized mode" by default. All the writes to the media are synchronous which is achieved by setting FUA (Force Unit Access) bit in SCSI WRITE(10,12) commands. This prevents I/O requests aggregation in block layer dramatically decreasing performance. This patch brings an option to accept or ignore mentioned bit a) via specifying module parameter "nofua", or b) through sysfs entry /sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua (_UDC_ is the name of the USB Device Controller driver) Patch is based on the work that was done by Denis Karpov for Maemo 5 platform. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10usb: gadget: storage: strict coversion of 'ro' parameterAndy Shevchenko1-4/+4
Bring a strict way to get the 'ro' parameter from the user. The patch followed by this one adds another boolean parameter. To be consistent Michał Nazarewicz proposed to use simple_strtol() in both cases (correspondend discussion in LKML [1]). Due to simple_strtol() doesn't return error in a good way and we have a boolean parameter the strict_strtoul() is used. [1] http://lkml.org/lkml/2010/7/14/169 Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: functionfs: stale Makefile entry removedMichal Nazarewicz1-1/+0
Removed entry referencing g_eth_ffs.c file from Makefile. The file never existed and the line was a leftover from a developing process. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI Debug Port Device Gadgetstephane duverger3-0/+464
This is a patch that implements an USB EHCI Debug Device using the Gadget API. This patch applies to a 2.6.35-rc3 kernel. The gadget needs a compliant usb controller that forwards the USB_DEVICE_DEBUG_MODE feature to its gadget. The gadget provides two configuration modes, one that only printk() the received data, and one that exposes a serial device to userland (/dev/ttyGSxxx). The gadget has been tested on an IGEPv2 board running a 2.6.35-rc1 kernel. The debug port was fed on the host side by a 2.6.34 kernel. Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: Remove unnecessary casts of private_dataJoe Perches1-3/+3
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: autoconvert trivial BKL users to private mutexArnd Bergmann1-3/+4
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: storage_common: comments updatedMichal Nazarewicz1-21/+48
Updated comment to describe why printing macros are needed even thought they are copied form the composite.h. Also, made multiline comments follow the coding standard. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: compilation issue: missing TASK_INTERRUPTIBLEstephane duverger1-0/+1
Here is the patch for the following issue: drivers/usb/gadget/u_serial.c: In function ‘gs_start_tx’: drivers/usb/gadget/u_serial.c:369: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:369: error: (Each undeclared identifier is reported only once drivers/usb/gadget/u_serial.c:369: error: for each function it appears in.) drivers/usb/gadget/u_serial.c: In function ‘gs_rx_push’: drivers/usb/gadget/u_serial.c:546: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c: In function ‘gs_close’: drivers/usb/gadget/u_serial.c:857: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:857: error: implicit declaration of function ‘signal_pending’ drivers/usb/gadget/u_serial.c:857: error: implicit declaration of function ‘schedule_timeout’ drivers/usb/gadget/u_serial.c: In function ‘gserial_cleanup’: drivers/usb/gadget/u_serial.c:1190: error: ‘TASK_UNINTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:1190: error: implicit declaration of function ‘schedule’ drivers/usb/gadget/u_serial.c: In function ‘gserial_disconnect’: drivers/usb/gadget/u_serial.c:1311: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: g_fs: code cleanupMichal Nazarewicz2-137/+60
This commit cleans the g_fs gadget hopefully making it more readable. This is achieved by usage of the usb_string_ids_tab() function for batch string IDs registration as well as generalising configuration so that a single routine is used to add each configuration and bind interfaces. As an effect, the code is shorter and has fewer #ifdefs. Moreover, in some circumstances previous code #defined CONFIG_USB_FUNCTIONFS_GENERIC macro to prevent a situation where gadget with no configurations is built. This code removes the #define form source code and achieves the same effect using select in Kconfig. This patch also changes wording and names of the Kconfig options. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: convert usb_hcd bitfields into atomic flagsAlan Stern1-3/+3
This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: section mismatch warning fixedMichal Nazarewicz13-22/+22
In may gadgets bind and bind like functions were in a init section as they were only run during initialisation. However, being callback functions they were referenced from structures in “normal” sections. Changing the tag from “__init” to “__ref” fixes the warnings. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: f_mass_storage: added eject callbackMichal Nazarewicz2-40/+74
Added pre_eject() and post_eject() callbacks which are called before and after removable logical unit is ejected. The first can prevent logical unit from being ejected. This commit also changes the way callbacks are passed to the function from gadget. A fsg_operations structure has been created which lists all callbacks -- this is passed to the fsg_config. This is important because it changes the way thread_exits() callback is passed. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: composite: added disconnect callbackMichal Nazarewicz1-0/+2
Added a disconnect() callback to composite devices which is called by composite glue when its disconnect callback is called by gadget. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: g_multi: code clean up and refactoringMichal Nazarewicz2-116/+147
The Multifunction Composite Gadget have been cleaned up and refactored so hopefully it looks prettier and works at least as good as before changes. A Kconfig has also been fixed to make it impossible to build FunctionFS gadget with no configurations. With this patch, if RNDIS is not chosen by the user CDC is force-selected. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: f_mass_storage: dead code removedMichal Nazarewicz1-3/+0
The ep0req_name was never used in f_mass_storage hence it may be safely removed from the code. It was a leftover from File Storage Gadget which used it for debug messages. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: f_fs: use usb_string_ids_n()Michal Nazarewicz1-18/+12
Use usb_string_ids_n() function to simplify string ids registeration. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: composite: usb_string_ids_*() functions addedMichal Nazarewicz1-4/+67
usb_string_ids_tab() and usb_string_ids_n() functions added to the composite framework. The first accepts an array of usb_string object and for each registeres a string id and the second registeres a given number of ids and returns the first. This may simplify string ids registration since gadgets and composite functions won't have to call usb_string_id() several times and each time check for errer status -- all this will be done with a single call. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: f_fs: functionfs_add() renamed to functionfs_bind_config()Michal Nazarewicz2-4/+4
FunctionFS had a bit unique name for function used to add it to USB configuration. Renamed as to match naming convention of other functions. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: f_mass_storage: fsg_add() renamed to fsg_bind_config()Michal Nazarewicz3-6/+13
Mass Storage Function had a bit unique name for function used to add it to USB configuration. Renamed as to match naming convention of other functions. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: g_mass_storage: static data instead of dynamic allocationMichal Nazarewicz1-6/+9
This patch changes msg_do_config() function so that it uses a static object for a fsg_common structure instead of dynamically allocated. This is a micro-optimisation. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10usb: gadget: Do not take BKL for gadget->ops->ioctlArnd Bergmann2-6/+2
There is no gadget driver in the tree that actually implements the ioctl operation, so obviously it is not necessary to hold the BKL around the call. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Michał Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: Add a serial number parameter to g_file_storage moduleYann Cantin1-11/+58
This patch add a serial number parameter to the g_file_storage module. There's validity checks against the string passed to comply with the specs. Signed-off-by: Yann Cantin <yann.cantin@laposte.net> Cc: Michał Nazarewicz <m.nazarewicz@samsung.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: langwell_udc.c: printk needs a (unsigned long long) cast for a dma_tJoe Perches1-3/+3
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10usb: throw away custom hex digit methodsAndy Shevchenko1-13/+2
Recent kernel has common method to convert hex digit to its value. Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: Use memdup_userJulia Lawall1-7/+3
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-07Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds2-4/+4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits) ALSA: hda - Add pin-fix for HP dc5750 ALSA: als4000: Fix potentially invalid DMA mode setup ALSA: als4000: enable burst mode ALSA: hda - Fix initial capsrc selection in patch_alc269() ASoC: TWL4030: Capture route runtime DAPM ordering fix ALSA: hda - Add PC-beep whitelist for an Intel board ALSA: hda - More relax for pending period handling ALSA: hda - Define AC_FMT_* constants ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs ALSA: hda - Add support for HDMI HBR passthrough ALSA: hda - Set Stream Type in Stream Format according to AES0 ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF ASoC: wm9081: fix resource reclaim in wm9081_register error path ASoC: wm8978: fix a memory leak if a wm8978_register fail ASoC: wm8974: fix a memory leak if another WM8974 is registered ASoC: wm8961: fix resource reclaim in wm8961_register error path ASoC: wm8955: fix resource reclaim in wm8955_register error path ASoC: wm8940: fix a memory leak if wm8940_register return error ASoC: wm8904: fix resource reclaim in wm8904_register error path ...
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely1-5/+5
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-05Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-0/+1
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits) of/platform: Register of_platform_drivers with an "of:" prefix of/address: Clean up function declarations of/spi: call of_register_spi_devices() from spi core code of: Provide default of_node_to_nid() implementation. of/device: Make of_device_make_bus_id() usable by other code. of/irq: Fix endian issues in parsing interrupt specifiers of: Fix phandle endian issues of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string of: remove of_default_bus_ids of: make of_find_device_by_node generic microblaze: remove references to of_device and to_of_device sparc: remove references to of_device and to_of_device powerpc: remove references to of_device and to_of_device of/device: Replace of_device with platform_device in includes and core code of/device: Protect against binding of_platform_drivers to non-OF devices of: remove asm/of_device.h of: remove asm/of_platform.h of/platform: remove all of_bus_type and of_platform_bus_type references of: Merge of_platform_bus_type with platform_bus_type drivercore/of: Add OF style matching to platform bus ... Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just some obj-y removals by the devicetree branch, while the microblaze updates added a new file.
2010-08-05Merge branch 'topic/misc' into for-linusTakashi Iwai2-4/+4
2010-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds1-2/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits) phy/marvell: add 88ec048 support igb: Program MDICNFG register prior to PHY init e1000e: correct MAC-PHY interconnect register offset for 82579 hso: Add new product ID can: Add driver for esd CAN-USB/2 device l2tp: fix export of header file for userspace can-raw: Fix skb_orphan_try handling Revert "net: remove zap_completion_queue" net: cleanup inclusion phy/marvell: add 88e1121 interface mode support u32: negative offset fix net: Fix a typo from "dev" to "ndev" igb: Use irq_synchronize per vector when using MSI-X ixgbevf: fix null pointer dereference due to filter being set for VLAN 0 e1000e: Fix irq_synchronize in MSI-X case e1000e: register pm_qos request on hardware activation ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice net: Add getsockopt support for TCP thin-streams cxgb4: update driver version cxgb4: add new PCI IDs ... Manually fix up conflicts in: - drivers/net/e1000e/netdev.c: due to pm_qos registration infrastructure changes - drivers/net/phy/marvell.c: conflict between adding 88ec048 support and cleaning up the IDs - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req conflict (registration change vs marking it static)
2010-08-04Merge branch 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds4-407/+21
* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits) V4L/DVB: sms: Convert IR support to use the Remote Controller core V4L/DVB: sms: properly initialize IR phys and IR name V4L/DVB: standardize names at rc-dib0700 tables V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5 V4L/DVB: dib0700: properly implement IR change_protocol V4L/DVB: dib0700: break keytable into NEC and RC-5 variants V4L/DVB: dib0700: avoid bad repeat V4L/DVB: Port dib0700 to rc-core V4L/DVB: Add a keymap file with dib0700 table V4L/DVB: dvb-usb: add support for rc-core mode V4L/DVB: dvb-usb: prepare drivers for using rc-core V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key V4L/DVB: rj54n1cb0c: fix a comment in the driver V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2 V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats V4L/DVB: mediabus: fix ambiguous pixel code names ...
2010-08-02V4L/DVB: uvc: Move constants and structures definitions to linux/usb/video.hLaurent Pinchart4-407/+21
The UVC host and gadget drivers both define constants and structures in private header files. Move all those definitions to linux/usb/video.h where they can be shared by the two drivers (and be available for userspace applications). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01of/address: Clean up function declarationsGrant Likely1-0/+1
This patch moves the declaration of of_get_address(), of_get_pci_address(), and of_pci_address_to_resource() out of arch code and into the common linux/of_address header file. This patch also fixes some of the asm/prom.h ordering issues. It still includes some header files that it ideally shouldn't be, but at least the ordering is consistent now so that of_* overrides work. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-31Merge branch 'devel-stable' into develRussell King1-1/+1
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/kernel/setup.c arch/arm/mm/init.c
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.