aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-29Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds9-128/+437
Pull USB/Thunderbolt/PHY driver updates from Greg KH: "Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1. With the advent of USB4, "Thunderbolt" has really become USB4, so the renaming of the Kconfig option and starting to share subsystem code has begun, hence both subsystems coming in through the same tree here. PHY driver updates also touched USB drivers, so that is coming in through here as well. Major stuff included in here are: - USB 4 initial support added (i.e. Thunderbolt) - musb driver updates - USB gadget driver updates - PHY driver updates - USB PHY driver updates - lots of USB serial stuff fixed up - USB typec updates - USB-IP fixes - lots of other smaller USB driver updates All of these have been in linux-next for a while now (the usb-serial tree is already tested in linux-next on its own before merged into here), with no reported issues" [ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA that causes configuration warnings - Linus ] * tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) Doc: ABI: add usb charger uevent usb: phy: show USB charger type for user usb: cdns3: fix spelling mistake and rework grammar in text usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors USB: serial: cyberjack: fix spelling mistake "To" -> "Too" USB: serial: ir-usb: simplify endpoint check USB: serial: ir-usb: make set_termios synchronous USB: serial: ir-usb: fix IrLAP framing USB: serial: ir-usb: fix link-speed handling USB: serial: ir-usb: add missing endpoint sanity check usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW usb: typec: wcove: fix "op-sink-microwatt" default that was in mW usb: dwc3: pci: add ID for the Intel Comet Lake -V variant usb: typec: tcpci: mask event interrupts when remove driver usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186 usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined usb: chipidea: handle single role for usb role class usb: musb: fix spelling mistake: "periperal" -> "peripheral" phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS USB: usbfs: Always unlink URBs in reverse order ...
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds2-4/+4
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-22usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186Peter Robinson1-0/+1
Set the MODULE_FIRMWARE for tegra186, it's registered for 124/210 and ensures the firmware is available at the appropriate time such as in the initrd, else if the firmware is unavailable the driver fails with the following errors: tegra-xusb 3530000.usb: Direct firmware load for nvidia/tegra186/xusb.bin failed with error -2 tegra-xusb 3530000.usb: failed to request firmware: -2 tegra-xusb 3530000.usb: failed to load firmware: -2 tegra-xusb: probe of 3530000.usb failed with error -2 Fixes: 5f9be5f3f899 ("usb: host: xhci-tegra: Add Tegra186 XUSB support") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200120141910.116097-1-pbrobinson@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-13Merge 5.5-rc6 into usb-nextGreg Kroah-Hartman1-2/+6
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09usb: host: ehci-tegra: Remove unused fields from tegra_ehci_hcdDmitry Osipenko1-2/+0
There are few stale fields in tegra_ehci_hcd structure, let's remove them. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200106013416.9604-21-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09usb: host: ehci-tegra: Stop managing PHY's powerDmitry Osipenko1-6/+0
There is no need to use usb_phy_set_suspend during of driver's probe because now PHY driver enables hardware during of PHY's initialization. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200106013416.9604-20-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09usb: host: ehci-tegra: Correct teardown order of driver's removalDmitry Osipenko1-7/+1
I found that PHY's enable refcounting was broken and after fixing it I also found that machine started to hang after EHCI driver module removal. Turned out that the teardown order is incorrect because HCD must be unregistered *before* PHY's disabling. Note that it is also not correct to assert the shared reset during of driver's removal because PHY takes care of resetting shared pads and thus it's better to remove that part from the EHCI driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200106013416.9604-3-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09usb: exynos: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski3-5/+5
Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200104152107.11407-9-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-08usb: ehci-mv: Fix missing iomem in castKrzysztof Kozlowski1-1/+1
Fix missing __iomem in cast to struct ehci_caps. This fixes the Sparse warning visible on x86_64 compile test: drivers/usb/host/ehci-mv.c:167:23: warning: cast removes address space '<asn:2>' of expression drivers/usb/host/ehci-mv.c:167:20: warning: incorrect type in assignment (different address spaces) drivers/usb/host/ehci-mv.c:167:20: expected struct ehci_caps [noderef] <asn:2> *caps drivers/usb/host/ehci-mv.c:167:20: got struct ehci_caps * Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200103164031.4089-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-08usb: ohci-da8xx: ensure error return on variable error is setColin Ian King1-2/+6
Currently when an error occurs when calling devm_gpiod_get_optional or calling gpiod_to_irq it causes an uninitialized error return in variable 'error' to be returned. Fix this by ensuring the error variable is set from da8xx_ohci->oc_gpio and oc_irq. Thanks to Dan Carpenter for spotting the uninitialized error in the gpiod_to_irq failure case. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: d193abf1c913 ("usb: ohci-da8xx: add vbus and overcurrent gpios") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200107123901.101190-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-08usb: host: oxu210hp-hcd: fix gcc warningArnd Bergmann1-5/+9
gcc -O3 warns about correct code: inlined from 'oxu_hub_control.constprop' at drivers/usb/host/oxu210hp-hcd.c:3652:3: include/linux/string.h:411:9: error: argument 1 null where non-null expected [-Werror=nonnull] return __builtin_memset(p, c, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/usb/host/oxu210hp-hcd.c: In function 'oxu_hub_control.constprop': include/linux/string.h:411:9: note: in a call to built-in function '__builtin_memset' Expand the code slightly to let gcc better understand it and not warn any more. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200107214354.1008937-1-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig2-4/+4
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-31usb: host: Do not compile test deprecated USB_OCTEON_EHCIKrzysztof Kozlowski1-1/+1
The USB_OCTEON_EHCI is deprecated and only selects proper driver so there is no need to compile test it. Since it selects USB_EHCI_BIG_ENDIAN_MMIO it causes compilation failures on certain big endian architectures (e.g. m68k): In file included from drivers/usb/host/ehci-mxc.c:19:0: drivers/usb/host/ehci.h: In function ‘ehci_readl’: drivers/usb/host/ehci.h:743:3: error: implicit declaration of function ‘readl_be’ [-Werror=implicit-function-declaration] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1577778392-570-1-git-send-email-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: host: Enable compile testing for some of driversKrzysztof Kozlowski1-27/+27
Some of the USB host drivers can be compile tested to increase build coverage. Add 'if' conditional to 'default y' so they will not get enabled by default on all other architectures. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191230172215.17370-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30usb: mtk-xhci: Do not explicitly set the DMA maskTomasz Figa1-5/+0
The mtk-xhci platform glue sets the DMA mask to 32 bits on its own, which was needed before commit fda182d80a0b ("usb: xhci: configure 32-bit DMA if the controller does not support 64-bit DMA"), but now it has no effect, because xhci_gen_setup() sets it up for us according to hardware capabilities. Remove the useless code. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20191219093954.163417-1-tfiga@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30USB: EHCI: ehci-mv: add HSIC supportLubomir Rintel1-0/+11
Some special dance is needed to initialize the HSIC port. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20191221065008.266445-2-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30USB: EHCI: ehci-mv: drop pxa_ehci_type and some device IDsLubomir Rintel1-4/+2
This is merely a cleanup. None of these is used anywhere. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20191221065008.266445-4-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-30USB: EHCI: ehci-mv: make the PHY optionalLubomir Rintel1-1/+1
We may be using a NOP transceiver and those are treated specially by the USB core and return -ENODEV with devm_phy_get(). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20191221065008.266445-3-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-23Merge 5.5-rc3 into usb-nextGreg Kroah-Hartman2-2/+13
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18usb: xhci: Fix build warning seen with CONFIG_PM=nGuenter Roeck1-1/+1
The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin <henryl@nvidia.com> Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17USB: EHCI: Do not return -EPIPE when hub is disconnectedErkka Talvitie1-1/+12
When disconnecting a USB hub that has some child device(s) connected to it (such as a USB mouse), then the stack tries to clear halt and reset device(s) which are _already_ physically disconnected. The issue has been reproduced with: CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE. SW: U-Boot 2019.07 and kernel 4.19.40. CPU: HP Proliant Microserver Gen8. SW: Linux version 4.2.3-300.fc23.x86_64 In this situation there will be error bit for MMF active yet the CERR equals EHCI_TUNE_CERR + halt. Existing implementation interprets this as a stall [1] (chapter 8.4.5). The possible conditions when the MMF will be active + halt can be found from [2] (Table 4-13). Fix for the issue is to check whether MMF is active and PID Code is IN before checking for the stall. If these conditions are true then it is not a stall. What happens after the fix is that when disconnecting a hub with attached device(s) the situation is not interpret as a stall. [1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf] [2] [https://www.intel.com/content/dam/www/public/us/en/documents/ technical-specifications/ehci-specification-for-usb.pdf] Signed-off-by: Erkka Talvitie <erkka.talvitie@vincit.fi> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-16Merge 5.5-rc2 into usb-nextGreg Kroah-Hartman6-15/+40
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: make sure interrupts are restored to correct stateMathias Nyman1-6/+6
spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour.Mathias Nyman1-1/+2
xhci driver claims it needs XHCI_TRUST_TX_LENGTH quirk for both Broadcom/Cavium and a Renesas xHC controllers. The quirk was inteded for handling false "success" complete event for transfers that had data left untransferred. These transfers should complete with "short packet" events instead. In these two new cases the false "success" completion is reported after a "short packet" if the TD consists of several TRBs. xHCI specs 4.10.1.1.2 say remaining TRBs should report "short packet" as well after the first short packet in a TD, but this issue seems so common it doesn't make sense to add the quirk for all vendors. Turn these events into short packets automatically instead. This gets rid of the "The WARN Successful completion on short TX for slot 1 ep 1: needs XHCI_TRUST_TX_LENGTH quirk" warning in many cases. Cc: <stable@vger.kernel.org> Reported-by: Eli Billauer <eli.billauer@gmail.com> Reported-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Eli Billauer <eli.billauer@gmail.com> Tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Increase STS_HALT timeout in xhci_suspend()Kai-Heng Feng1-1/+1
I've recently observed failed xHCI suspend attempt on AMD Raven Ridge system: kernel: xhci_hcd 0000:04:00.4: WARN: xHC CMD_RUN timeout kernel: PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 returns -110 kernel: PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -110 kernel: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 kernel: PM: Device 0000:04:00.4 failed to suspend async: error -110 Similar to commit ac343366846a ("xhci: Increase STS_SAVE timeout in xhci_suspend()") we also need to increase the HALT timeout to make it be able to suspend again. Cc: <stable@vger.kernel.org> # 5.2+ Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11usb: xhci: only set D3hot for pci deviceHenry Lin3-5/+16
Xhci driver cannot call pci_set_power_state() on non-pci xhci host controllers. For example, NVIDIA Tegra XHCI host controller which acts as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform hits this issue during shutdown. Cc: <stable@vger.kernel.org> Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell") Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: fix USB3 device initiated resume race with roothub autosuspendMathias Nyman2-2/+11
A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: <stable@vger.kernel.org> Cc: Lee, Hou-hsun <hou-hsun.lee@intel.com> Reported-by: Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-11xhci: Fix memory leak in xhci_add_in_port()Mika Westerberg1-0/+4
When xHCI is part of Alpine or Titan Ridge Thunderbolt controller and the xHCI device is hot-removed as a result of unplugging a dock for example, the driver leaks memory it allocates for xhci->usb3_rhub.psi and xhci->usb2_rhub.psi in xhci_add_in_port() as reported by kmemleak: unreferenced object 0xffff922c24ef42f0 (size 16): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 16 bytes): 21 00 0c 00 12 00 dc 05 23 00 e0 01 00 00 00 00 !.......#....... backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 unreferenced object 0xffff922c24ef3318 (size 8): comm "kworker/u16:2", pid 178, jiffies 4294711640 (age 956.620s) hex dump (first 8 bytes): 34 01 05 00 35 41 0a 00 4...5A.. backtrace: [<000000007ac80914>] xhci_mem_init+0xcf8/0xeb7 [<0000000001b6d775>] xhci_init+0x7c/0x160 [<00000000db443fe3>] xhci_gen_setup+0x214/0x340 [<00000000fdffd320>] xhci_pci_setup+0x48/0x110 [<00000000541e1e03>] usb_add_hcd.cold+0x265/0x747 [<00000000ca47a56b>] usb_hcd_pci_probe+0x219/0x3b4 [<0000000021043861>] xhci_pci_probe+0x24/0x1c0 [<00000000b9231f25>] local_pci_probe+0x3d/0x70 [<000000006385c9d7>] pci_device_probe+0xd0/0x150 [<0000000070241068>] really_probe+0xf5/0x3c0 [<0000000061f35c0a>] driver_probe_device+0x58/0x100 [<000000009da11198>] bus_for_each_drv+0x79/0xc0 [<000000009ce45f69>] __device_attach+0xda/0x160 [<00000000df201aaf>] pci_bus_add_device+0x46/0x70 [<0000000088a1bc48>] pci_bus_add_devices+0x27/0x60 [<00000000ad9ee708>] pci_bus_add_devices+0x52/0x60 Fix this by calling kfree() for the both psi objects in xhci_mem_cleanup(). Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191211142007.8847-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Implement basic ELPG supportThierry Reding1-8/+119
This implements basic engine-level powergate support which allows the XUSB controller to be put into a low power mode on system sleep and get it out of that low power mode again on resume. Based on work by JC Kuo <jckuo@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-11-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Add XUSB controller contextThierry Reding1-11/+69
Define the offsets of the registers that need to be saved on suspend and restored on resume for the various NVIDIA Tegra generations supported by the XUSB driver. Based on work by JC Kuo <jckuo@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-10-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Add support for XUSB context save/restoreThierry Reding1-2/+100
The XUSB controller contains registers that need to be saved on suspend and restored on resume in addition to the XHCI specific registers. Add support for saving and restoring the XUSB specific context. Based on work by JC Kuo <jckuo@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-9-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Enable runtime PM as late as possibleThierry Reding1-16/+17
A number of things can currently go wrong after the XUSB controller has been enabled, which means that it might need to be disabled again before it has ever been used. Avoid this by delaying runtime PM enablement until it's really required right before registers are accessed for the first time. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-8-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Reuse stored register base addressThierry Reding1-8/+8
The base address of the XUSB controller's registers is already stored in the HCD. Move assignment to the HCD fields to an earlier point so that they can be reused in the tegra_xusb_config() function. This avoids the need to pass the base address as an extra parameter, which in turn comes in handy in subsequent patches that need to call this function from the suspend/resume paths where these values are no longer readily available. Based on work by JC Kuo <jckuo@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-7-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Extract firmware enable helperThierry Reding1-12/+29
Extract a helper that enables message generation from the firmware. This removes clutter from tegra_xusb_probe() and will also come in useful for subsequent patches that introduce suspend/resume support. Based on work by JC Kuo <jckuo@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-6-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Use CNR as firmware ready indicatorThierry Reding1-12/+15
The Falcon CPU state is a suboptimal indicator for firmware readiness, since the Falcon can be in a running state if the firmware is handling port state changes or running other tasks. Instead, the driver should check the STS_CNR bit to determine whether or not the firmware has been successfully loaded and is ready for XHCI operation. Based on work by JC Kuo <jckuo@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-5-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Avoid a fixed duration sleepThierry Reding1-1/+14
Do not use a fixed duration sleep to wait for the DMA controller to become ready. Instead, poll the L2IMEMOP_RESULT register for the VLD flag to determine when the XUSB controller's DMA master is ready. Based on work by JC Kuo <jckuo@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-4-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Separate firmware request and loadThierry Reding1-10/+30
Subsequent patches for system suspend/resume support will need to reload the firmware on resume. Since the firmware remains in system memory, the driver doesn't need to reload it from the filesystem. However, the XUSB controller will be reset across suspend/resume, so it needs to load the firmware into its microcontroller on resume. Split the firmware request and the firmware load code into two separate functions so that the driver can reuse the firmware in system memory to reload the microcontroller on resume. Based on work by JC Kuo <jckuo@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-3-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: xhci-tegra: Fix "tega" -> "tegra" typoThierry Reding1-2/+2
The tegra_xusb_mbox_regs structure was misspelled tega_xusb_mbox_regs. Fortunately this was done consistently so it didn't cause any issues. Reviewed-by: JC Kuo <jckuo@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20191206140653.2085561-2-thierry.reding@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-10usb: host: ehci-sh: Remove unused platform data supportGeert Uytterhoeven1-7/+0
ehci_sh_platdata was never used, remove it. It can be resurrected from git history when needed. This basically reverts commit 3e0c70d050c7ed6d ("usb: ehci-sh: Add PHY init function with platform data"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20191206132849.29406-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-03Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+1
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas1-1/+1
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-21usb: host: Fix Kconfig indentationKrzysztof Kozlowski1-25/+25
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191121132910.29310-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-18usb: host: xhci-tegra: Correct phy enable sequenceNagarjuna Kristam1-12/+13
XUSB phy needs to be enabled before un-powergating the power partitions. However in the current sequence, it happens opposite. Correct the phy enable and powergating partition sequence to avoid any boot hangs. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Jui Chang Kuo <jckuo@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1572859470-7823-1-git-send-email-nkristam@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-16xhci-pci: Allow host runtime PM as default also for Intel Ice Lake xHCIMika Westerberg1-1/+3
Intel Ice Lake has two xHCI controllers one on PCH and the other as part of the CPU itself. The latter is also part of the so called Type C Subsystem (TCSS) sharing ACPI power resources with the PCIe root ports and the Thunderbolt controllers. In order to put the whole TCSS block into D3cold the xHCI needs to be runtime suspended as well when idle. For this reason allow runtime PM as default for Ice Lake TCSS xHCI controller. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1573836603-10871-5-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-16usb: host: xhci: Support running urb giveback in tasklet contextSuwan Kim2-3/+2
Patch "USB: HCD: support giveback of URB in tasklet context"[1] introduced giveback of urb in tasklet context. [1] This patch was applied to ehci but not xhci. [2] This patch significantly reduces the hard irq time of xhci. Especially for uvc driver, the hard irq including the uvc completion function runs quite long but applying this patch reduces the hard irq time of xhci. I have tested four SS devices to check if performance degradation occurs when urb completion functions run in the tasklet context. As a result of the test, all devices works well and shows very similar performance with the upstream kernel. Moreover, usb ethernet adapter show better performance than the upstream kernel about 5% for RX and 2% for TX. Four SS devices is as follows. SS devices for test 1. WD My Passport 2TB (external hard drive) 2. Sandisk Ultra Flair USB 3.0 32GB 3. Logitech Brio webcam 4. Iptime 1gigabit ethernet adapter (Mediatek RTL8153) Test description 1. Mass storage (hard drive) performance test - run below command 10 times and compute the average performance dd if=/dev/sdN iflag=direct of=/dev/null bs=1G count=1 2. Mass storage (flash memory) performance test - run below command 10 times and compute the average performance dd if=/dev/sdN iflag=direct of=/dev/null bs=1G count=1 3. Webcam streaming performance test - run simple capture program and get the average frame rate per second - capture 1500 frames - program link https://github.com/asfaca/Webcam-performance-analyzing-tool - video resolution : 4096 X 2160 (4K) at 30 or 24 fps - device (Logitech Brio) spec url for the highest resolution and fps https://support.logitech.com/en_gb/product/brio-stream/specs 4. USB Ethernet adapter performance test - directly connect two linux machines with ethernet cable - run pktgen of linux kernel and send 1500 bytes packets - run vnstat to measure the network bandwidth for 180 seconds Test machine - CPU : Intel i5-7600 @ 3.5GHz Test results 1. Mass storage (hard drive) performance test WD My Passport 2TB (external hard drive) -------------------------------------------------------------------- xhci without tasklet | xhci with tasklet -------------------------------------------------------------------- 103.667MB/s | 103.692MB/s -------------------------------------------------------------------- 2. Mass storage (flash memory) performance test Sandisk Ultra Flair USB 3.0 32GB -------------------------------------------------------------------- xhci without tasklet | xhci with tasklet -------------------------------------------------------------------- 129.727MB/s | 130.2MB/s -------------------------------------------------------------------- 3. Webcam streaming performance test Logitech Brio webcam -------------------------------------------------------------------- xhci without tasklet | xhci with tasklet -------------------------------------------------------------------- 26.4451 fps | 26.3949 fps -------------------------------------------------------------------- 4. USB Ethernet adapter performance test Iptime 1gigabit ethernet adapter (Mediatek RTL8153) -------------------------------------------------------------------- xhci without tasklet | xhci with tasklet -------------------------------------------------------------------- RX 933.86 Mbit/s | 983.86 Mbit/s -------------------------------------------------------------------- TX 830.18 Mbit/s | 882.75 Mbit/s -------------------------------------------------------------------- [1], https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=94dfd7edfd5c9b605caf7b562de7a813d216e011 [2], https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=428aac8a81058e2303677a8fbf26670229e51d3a Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1573836603-10871-4-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-16xhci: Add tracing for xhci doorbell register writesMathias Nyman3-0/+61
Trace when a register in the doorbell array is written, both for host controller command doorbell and device doorbells, including for which endpoint and stream Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1573836603-10871-3-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-16usb: host: xhci: update event ring dequeue pointer on purposePeter Chen1-17/+43
On some situations, the software handles TRB events slower than adding TRBs, then xhci_handle_event can't return zero long time, the xHC will consider the event ring is full, and trigger "Event Ring Full" error, but in fact, the software has already finished lots of events, just no chance to update ERDP (event ring dequeue pointer). In this commit, we force update ERDP if half of TRBS_PER_SEGMENT events have handled to avoid "Event Ring Full" error. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1573836603-10871-2-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-14usb: host: imx21: create debugfs directory under usb rootChunfeng Yun1-1/+1
Move it's directory from the root of the debugfs filesystem into the root of usb Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1573541519-28488-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: host: fotg210: add missed clk_put callsChuhong Yuan1-2/+6
The driver forgets to call clk_put when probe fails and remove. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191102062245.4014-1-hslester96@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04usb: host: oxu210hp-hcd: fix __iomem annotationsBen Dooks (Codethink)1-7/+7
There are a number of places in the driver where it fails to maintain __iomem on pointers used to access registers so fixup the warnings by adding these in the appropriate places. Examples of the sparse warnings fixed: drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:681:16: warning: incorrect type in argument 1 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:681:16: expected void const volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:681:16: got void * Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191017171934.8771-1-ben.dooks@codethink.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.