aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/mtu3/mtu3_hw_regs.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-26usb: mtu3: add debugfs interface filesChunfeng Yun1-0/+11
This adds more debugfs consumers. The debugfs entries read some important registers, fifo status, QMU ring, endpoint status, and IPPC probe interface to get internal status. With these entries, users can check the registers, endpoint and GPD used during run time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: supports new QMU formatChunfeng Yun1-0/+1
In order to support U3gen2 ISOC transfer upto 96DPs, extend the data buffer length. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix transfer error of USB3 Gen2 isocChunfeng Yun1-4/+32
To support USB3 Gen2 ISOC, the registers of TXCSR1 and RXCSR1 are adjusted to support greater maxpkt and mult value, this patch fix this issue Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS modeChunfeng Yun1-0/+5
When the controller supports SS mode, but works as HS mode, the SOFTCONN will not be cleared automatically when clear USB3_EN by default, this cause an issue that can't disconnect from host, so clear SOFTCONN when clear USB3_EN when the class driver want to disable the D+ pullup. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb: mtu3: enable SETUPENDISR interruptChunfeng Yun1-0/+1
If the controller receives a new SETUP during SETUP data stage, and will generate SETUPENDISR interrupt, the driver should abort the current SETUP command and process the new one. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05usb: mtu3: fix error of xhci port id when enable U3 dual roleChunfeng Yun1-0/+1
If dual role mode is enabled, when switch u3port0 to device mode, it will affect port id calculation of host(xHCI), specially when host supports multi U2 ports or U3 ports, so need enable its dual role mode, and fix it here. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: mtu3: Remove redundant license textGreg Kroah-Hartman1-10/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19usb: mtu3: add support for usb3.1 IPChunfeng Yun1-0/+1
Support SuperSpeedPlus for usb3.1 device IP Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: use FORCE/RG_IDDIG to implement manual DRD switchChunfeng Yun1-0/+2
In order to keep manual DRD switch independent on IDDIG interrupt, make use of FORCE/RG_IDDIG instead of IDDIG EINT interrupt to implement manual DRD switch function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: support 36-bit DMA addressChunfeng Yun1-0/+10
add support for 36-bit DMA address [ Felipe Balbi: fix printk format for dma_addr_t ] Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-07-30usb: mtu3: fix ip sleep auto-exit issue when enable DRD modeChunfeng Yun1-1/+3
Ip sleep will auto exit if vbus comparison circuit of u2 phy is disabled when system tries to enter suspend mode, so get vbus-valid status from mac but not from u2 phy when enable DRD mode to fix the issue. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: Super-Speed Peripheral mode supportChunfeng Yun1-0/+33
add super-speed funtion for peripheral mode Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: Add MediaTek USB3 DRD driverChunfeng Yun1-0/+440
This patch adds support for the MediaTek USB3 controller integrated into MT8173. It currently supports High-Speed Peripheral Only mode. Super-Speed Peripheral, Dual-Role Device and Host Only (xHCI) modes will be added in the next patchs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.