aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
AgeCommit message (Collapse)AuthorFilesLines
2012-09-18USB: serial: kobil_sct: switch 4 remaining printk() calls to use dev_dbgGreg Kroah-Hartman1-5/+4
These somehow got missed previously (as they weren't calling dbg(), but rather printk() directly), so move over to using dev_dbg() as we never want to see startup messages unless debugging is enabled. Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: serial: ir-usb: remove startup noiseGreg Kroah-Hartman1-11/+1
Don't be telling the syslog that the driver was loaded, the majority of the usb-serial drivers do not, so this one shouldn't either. Also remove the pointless driver version information. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: serial: io_ti: remove some remaining printk() callsGreg Kroah-Hartman1-4/+4
Use dev_err() like the rest of that function does, and the rest of the driver does, to properly show what device and driver caused the problem. Cc: Johan Hovold <jhovold@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: serial: ftdi_sio: remove startup messageGreg Kroah-Hartman1-11/+1
No one needs to know that the driver is loaded (almost all other USB serial drivers are now quiet), so just load quietly. Also remove unused, and unneeded version information from the driver, that was pointless. Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: serial: ezusb: remove last printk() callGreg Kroah-Hartman1-4/+1
This code shouldn't be calling printk(), no one needs to know this debug message, the return code is good enough. Cc: "René Bürgel" <rene.buergel@sohard.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: usb-serial: remove debug module parameterGreg Kroah-Hartman3-15/+4
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: omninet: Fix compiler warning.Greg Kroah-Hartman1-1/+0
I forgot to remove an unused variable. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: whiteheat.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Support Department <support@connecttech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: visor.c: remove debug module parameterGreg Kroah-Hartman1-6/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: ti_usb_3410_5052.c: remove debug module parameterGreg Kroah-Hartman1-4/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Adhir Ramjiawan <adhirramjiawan0@gmail.com> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: symbolserial.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Johan Hovold <jhovold@gmail.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: sierra.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Alan Stern <stern@rowland.harvard.edu> CC: "Bjørn Mork" <bjorn@mork.no> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: pl2303.c: remove debug module parameterGreg Kroah-Hartman1-6/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Wang YanQing <Udknight@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: opticon.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: omninet.c: remove debug module parameterGreg Kroah-Hartman1-16/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: navman.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: mos7840.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Mark Ferrell <mferrell@uplogix.com> CC: Donald Lee <donald@asix.com.tw> CC: Tony Zelenoff <antonz@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: mos7720.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: mct_u232.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: kobil_sct.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: keyspan.c: remove debug module parameterGreg Kroah-Hartman1-6/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: iuu_phoenix.c: remove debug module parameterGreg Kroah-Hartman1-9/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Johan Hovold <jhovold@gmail.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: io_ti.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: "Eric W. Biederman" <ebiederm@xmission.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: io_edgeport.c: remove debug module parameterGreg Kroah-Hartman1-6/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: garmin_gps.c: remove debug module parameterGreg Kroah-Hartman1-14/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: f81232.c: remove debug module parameterGreg Kroah-Hartman1-6/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: cypress_m8.c: remove debug module parameterGreg Kroah-Hartman1-3/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Lonnie Mendez <dignome@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: cyberjack.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: ch341.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Johan Hovold <jhovold@gmail.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: belkin_sa.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: Serial: ark3116.c: remove debug module parameterGreg Kroah-Hartman1-4/+0
Now that all usb-serial modules are only using dev_dbg() the debug module parameter does not do anything at all, so remove it to reduce any confusion if someone were to try to use it. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Bart Hartgers <bart.hartgers@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: serial: remove debug parameter from usb_serial_debug_data()Greg Kroah-Hartman23-84/+58
We should use dev_dbg() for usb_serial_debug_data() like all of the rest of the usb-serial drivers use, so remove the debug parameter as it's not needed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18USB: serial: io_edgeport.c: remove dbg() usageGreg Kroah-Hartman1-324/+277
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17USB: serial: add vizzini driverGreg Kroah-Hartman3-0/+1372
Here's a driver for the Vizzini USB to serial device. It looks to be copied from cdc-acm, and probably can be cleaned up a lot more. Also, there's some odd "try to grab another interface" that is probably wrong. And, if this really is a cdc-acm device, it probably should just be a quirk of the cdc-acm device, but I can't figure that out, and people have been using this driver for a long time now. So merge it to let people use their hardware and clean it up over time. Driver written by Rob Duncan but cleaned up and forward ported to the latest kernel tree by me. Cc: Rob Duncan <rob.duncan@exar.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16Merge 3.6-rc6 into usb-nextGreg Kroah-Hartman3-5/+52
This resolves the merge problems with: drivers/usb/dwc3/gadget.c drivers/usb/musb/tusb6010.c that had been seen in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16Merge 3.6-rc6 into tty-nextGreg Kroah-Hartman3-5/+52
This pulls in the fixes in 3.6-rc6 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: io_ti.c: remove dbg() usageGreg Kroah-Hartman1-221/+162
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: "Eric W. Biederman" <ebiederm@xmission.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: keyspan: fix up some compiler warningsGreg Kroah-Hartman1-4/+2
I accidentally caused some compiler warnings, that were correct in pointing out problems, so fix them up now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: keyspan: remove dbg() usageGreg Kroah-Hartman2-148/+159
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the keyspan driver and uses dev_dbg() instead. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: mos7840.c: remove dbg() usageGreg Kroah-Hartman1-290/+183
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Mark Ferrell <mferrell@uplogix.com> CC: Donald Lee <donald@asix.com.tw> CC: Tony Zelenoff <antonz@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: ti_usb_3410_5052.c: remove dbg() usageGreg Kroah-Hartman1-65/+64
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Adhir Ramjiawan <adhirramjiawan0@gmail.com> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: mos7720.c: remove dbg() usageGreg Kroah-Hartman1-141/+79
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: mct_u232.c: remove dbg() usageGreg Kroah-Hartman1-53/+43
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: iuu_phoenix.c: remove dbg() usageGreg Kroah-Hartman1-67/+58
dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Johan Hovold <jhovold@gmail.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: usb_wwan.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: "Bjørn Mork" <bjorn@mork.no> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: ssu100.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: Alan Stern <stern@rowland.harvard.edu> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: spcp8x5.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: safe_serial.c: remove debug module parameterGreg Kroah-Hartman1-4/+0
Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: Rusty Russell <rusty@rustcorp.com.au> CC: Alan Stern <stern@rowland.harvard.edu> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: quatech2.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14USB: serial: qcserial.c: remove debug module parameterGreg Kroah-Hartman1-5/+0
Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: "Bjørn Mork" <bjorn@mork.no> CC: Dan Williams <dcbw@redhat.com> CC: Thomas Tuttle <ttuttle@chromium.org> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.