aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/wusbcore (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-01wusb: Remove unnecessary static function ckhdid_printfJoe Perches4-20/+8
This static inline is unnecessary and can be removed by using the vsprintf %ph extension. This reduces overall object size by more than 2K. Reported-by: Louis Taylor <louis@kragniz.eu> Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Louis Taylor <louis@kragniz.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19usb: wusbcore: wa-xfer: use struct_size() helperGustavo A. R. Silva1-8/+7
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, change the following form: sizeof(*packet_desc) + (sizeof(packet_desc->PacketLength[0]) * seg->isoc_frame_count) to : struct_size(packet_status, PacketStatus, seg->isoc_frame_count); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22USB: add missing SPDX lines to Kconfig and MakefilesGreg Kroah-Hartman1-0/+1
There are a few remaining drivers/usb/ files that do not have SPDX identifiers in them, all of these are either Kconfig or Makefiles. Add the correct GPL-2.0 identifier to them to make scanning tools happy. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-20crypto: drop mask=CRYPTO_ALG_ASYNC from 'cipher' tfm allocationsEric Biggers1-1/+1
'cipher' algorithms (single block ciphers) are always synchronous, so passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no effect. Many users therefore already don't pass it, but some still do. This inconsistency can cause confusion, especially since the way the 'mask' argument works is somewhat counterintuitive. Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-26Merge tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds1-4/+2
Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
2018-09-28wusb: Remove VLA usage of skcipherKees Cook1-8/+8
In the quest to remove all stack VLA usage from the kernel[1], this replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(), which uses a fixed stack size. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Johan Hovold <johan@kernel.org> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-10USB: wusbcore: Switch to bitmap_zalloc()Andy Shevchenko1-4/+2
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02usb: wusbcore: security: cast sizeof to int for comparisonJulia Lawall1-1/+1
Comparing an int to a size, which is unsigned, causes the int to become unsigned, giving the wrong result. usb_get_descriptor can return a negative error code. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ int x; expression e,e1; identifier f; @@ *x = f(...); ... when != x = e1 when != if (x < 0 || ...) { ... return ...; } *x < sizeof(e) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-28usb: wusbcore: remove excessive irqsaveJohn Ogness1-4/+4
wa_urb_dequeue() locks multiple spinlocks while disabling interrupts: spin_lock_irqsave(&lock1, flags); spin_lock_irqsave(&lock2, flags2); Obviously there is no need for the second irqsave and "flags2" variable since interrupts are disabled at that point. Remove the second irqsave: spin_lock_irqsave(&lock1, flags); spin_lock(&lock2); and eliminate the flags2 variable. Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-16USB: wusbcore: crypto: Remove VLA usageGustavo A. R. Silva1-2/+6
In preparation to enabling -Wvla, remove VLA and replace it with dynamic memory allocation instead. The use of stack Variable Length Arrays needs to be avoided, as they can be a vector for stack exhaustion, which can be both a runtime bug or a security flaw. Also, in general, as code evolves it is easy to lose track of how big a VLA can get. Thus, we can end up having runtime failures that are hard to debug. Also, fixed as part of the directive to remove all VLAs from the kernel: https://lkml.org/lkml/2018/3/7/621 Notice that in this particular case, an alternative to kzalloc is kcalloc, in which case the code would look as follows instead: iv = kcalloc(crypto_skcipher_ivsize(tfm_cbc), sizeof(*iv), GFP_KERNEL); but if the data type of _iv_ never changes, or the type size is always one byte, kzalloc is good enough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-09USB: wusbcore: remove redundant re-assignment to pointer 'dev'Colin Ian King1-1/+0
Pointer dev is initialized and then re-assigned with the same value a little later, hence the second assignment is redundant and can be removed. Cleans up clang warning: drivers/usb/wusbcore/wa-nep.c:88:17: warning: Value stored to 'dev' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-13Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds16-239/+21
Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
2017-11-07USB: wusbcore: Remove redundant license textGreg Kroah-Hartman16-234/+0
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Johan Hovold <johan@kernel.org> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman16-0/+16
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01usb: wusbcore: Use put_unaligned_le32Himanshu Jha1-5/+4
Use put_unaligned_le32 rather than using byte ordering function and memcpy which makes code clear. Also, add the header file where it is declared. Done using Coccinelle and semantic patch used is : @ rule1 @ identifier tmp; expression ptr,x; type T; @@ - tmp = cpu_to_le32(x); <+... when != tmp - memcpy(ptr, (T)&tmp, ...); + put_unaligned_le32(x,ptr); ...+> @ depends on rule1 @ type j; identifier tmp; @@ - j tmp; ...when != tmp Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01usb: wusbcore: wa-xfer: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10usb: wusbcore: dev-sysfs: constify attribute_group structures.Arvind Yadav1-1/+1
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10usb: wusbcore: wusbhc: constify attribute_group structures.Arvind Yadav1-1/+1
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10usb: wusbcore: cbaf: constify attribute_group structures.Arvind Yadav1-1/+1
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14USB: wusbcore: fix NULL-deref at probeJohan Hovold1-0/+3
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. This specifically fixes the NULL-pointer dereference when probing HWA HC devices. Fixes: df3654236e31 ("wusb: add the Wire Adapter (WA) core") Cc: stable <stable@vger.kernel.org> # 2.6.28 Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-10wusbcore: Fix one more crypto-on-the-stack bugAndy Lutomirski1-2/+1
The driver put a constant buffer of all zeros on the stack and pointed a scatterlist entry at it. This doesn't work with virtual stacks. Use ZERO_PAGE instead. Cc: stable@vger.kernel.org # 4.9 only Reported-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29usb: fix improper return value when kzalloc failsPan Bian1-0/+1
The comment says function wa_nep_queue() should return 0 if ok, and <0 errno code on error. However, its implementation always returns 0, even if the call to kzalloc() fails. As a result, the return value may be inconsistent with the execution status, which may mislead the callers. This patch fixes the bug, returning -ENOMEM when the call to kzalloc() fails. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29usb: return correct errno on failuresPan Bian1-0/+1
In function __wa_xfer_setup_segs(), variable result takes the return value. Its value should be a negative errno on failures. Because result may be reassigned in a loop, and its value is guaranteed to be not less than 0 during the following repeats of the loop. So when the call to kmalloc() or usb_alloc_urb() fails in the loop, the value of variable result may be 0 (indicates no error), which is inconsistent with the execution status. This patch fixes the bug, initializing variable result with -ENOMEM in the loop. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29usb: return correct errno code when krealloc failsPan Bian1-0/+1
In function wusb_dev_sec_add(), variable result takes the return value. Its value should be negative on failures. When function krealloc() is called, an earlier check of variable result guarantees that the value of result must not be less than "sizeof(*secd)", and result is not reassigned when krealloc() returns a NULL pointer. As a result, a positive value may be returned, which makes it impossible for the caller of wusb_dev_sec_add() to detect the error. This patch fixes the bug by assigning -ENOMEM to result when krealloc() returns NULL. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07wusbcore: wusbhc: use permission-specific DEVICE_ATTR variantsJulia Lawall1-8/+5
Use DEVICE_ATTR_RW for read-write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @rw@ declarer name DEVICE_ATTR; identifier x,x_show,x_store; @@ DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); @script:ocaml@ x << rw.x; x_show << rw.x_show; x_store << rw.x_store; @@ if not (x^"_show" = x_show && x^"_store" = x_store) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RW; identifier rw.x,rw.x_show,rw.x_store; @@ - DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); + DEVICE_ATTR_RW(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07wusbcore: dev-sysfs: use permission-specific DEVICE_ATTR variantsJulia Lawall1-3/+3
Use DEVICE_ATTR_WO for write ony attributes and DEVICE_ATTR_RO for read only attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The semantic patch for the RO case is as follows: (http://coccinelle.lip6.fr/) // <smpl> @ro@ declarer name DEVICE_ATTR; identifier x,x_show; @@ DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL); @script:ocaml@ x << ro.x; x_show << ro.x_show; @@ if not (x^"_show" = x_show) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RO; identifier ro.x,ro.x_show; @@ - DEVICE_ATTR(x, \(0444\|S_IRUGO\), x_show, NULL); + DEVICE_ATTR_RO(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-19wusb: fix error return code in wusb_prf()Wei Yongjun1-1/+3
Fix to return error code -ENOMEM from the kmalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: a19b882c07a6 ("wusb: Stop using the stack for sg crypto scratch space") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-17wusb: Stop using the stack for sg crypto scratch spaceAndy Lutomirski1-22/+37
Pointing an sg list at the stack is verboten and, with CONFIG_VMAP_STACK=y, will malfunction. Use kmalloc for the wusb crypto stack space instead. Untested -- I'm not entirely convinced that this hardware exists in the wild. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13USB: wusbcore: add in missing white space in error message textColin Ian King1-2/+1
A dev_err message spans two lines and the literal string is missing a white space between words. Add the white space and reformat the message to not span multiple lines. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: wusbcore: wa-nep: don't print on ENOMEMWolfram Sang1-4/+1
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: wusbcore: security: don't print on ENOMEMWolfram Sang1-3/+1
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30usb: wusbcore: crypto: don't print on ENOMEMWolfram Sang1-3/+1
All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15usb: wusbcore: wa-xfer: don't print error when allocating urb failsWolfram Sang1-3/+1
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-15usb: wusbcore: wa-nep: don't print error when allocating urb failsWolfram Sang1-3/+1
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09usb: wusbcore: Do not initialise statics to 0.Sandhya Bankar1-1/+1
Do not initialise statics to 0. This patch is found by checkpatch.pl script. Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09usb: wusbcore: Remove space before ',' and '(' .Sandhya Bankar1-2/+2
Remove space before ',' and '(' . This patch is detected by checkpatch.pl Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-19usb: wusbcore: remove unreachable codeSudip Mukherjee1-1/+0
The call to wusb_dev_sysfs_rm() which is just after return will never be executed. On checking the code, wusb_dev_sysfs_add() is the last one to be executed so even if that fails we do not need wusb_dev_sysfs_rm() in the error path. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-17Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds1-1/+1
Pull USB updates from Greg KH: "Here is the big USB patchset for 4.6-rc1. The normal mess is here, gadget and xhci fixes and updates, and lots of other driver updates and cleanups as well. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits) USB: core: let USB device know device node usb: devio: Add ioctl to disallow detaching kernel USB drivers. usb: gadget: f_acm: Fix configfs attr name usb: udc: lpc32xx: remove USB PLL and USB OTG clock management usb: udc: lpc32xx: remove direct access to clock controller registers usb: udc: lpc32xx: switch to clock prepare/unprepare model usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable() usb: gadget: renesas_usb3: Use ARCH_RENESAS usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma() usb: dwc2: Add support for Lantiq ARX and XRX SoCs usb: phy: generic: Handle late registration of gadget usb: gadget: bdc_udc: fix race condition in bdc_udc_exit() usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config usb: dwc2: Move host-specific core functions into hcd.c usb: dwc2: Move register save and restore functions usb: dwc2: Use kmem_cache_free() usb: dwc2: host: If using uframe scheduler, end splits better usb: dwc2: host: Totally redo the microframe scheduler usb: dwc2: host: Properly set even/odd frame usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call ...
2016-01-27wusb: Use skcipherHerbert Xu1-14/+16
This patch replaces uses of blkcipher with skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-24USB: core, wusbcore: use bus_to_hcdGeliang Tang1-1/+1
Use bus_to_hcd() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-03wusbcore: rh: use USB_DT_HUBSergei Shtylyov1-1/+1
Fix using the bare number to set the 'bDescriptorType' field of the Hub Descriptor while the value is #define'd in <linux/usb/ch11.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-15Merge tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds1-2/+2
Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ...
2015-02-13usb: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo3-11/+6
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. * drivers/uwb/drp.c::uwb_drp_handle_alien_drp() was formatting mas.bm into a buffer but never used it. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-25wusbcore: rh: use HUB_CHAR_*Sergei Shtylyov1-2/+2
Fix using the bare numbers to set the 'wHubCharacteristics' field of the Hub Descriptor while the values are #define'd in <linux/usb/ch11.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02wusb: replace memset by memzero_explicitJulia Lawall2-5/+5
Memset on a local variable may be removed when it is called just before the variable goes out of scope. Using memzero_explicit defeats this optimization. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; type T; @@ { ... when any T x[...]; ... when any when exists - memset + memzero_explicit (x, -0, ...) ... when != x when strict } // </smpl> This change was suggested by Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23usb: hub: rename khubd to hub_wq in documentation and commentsPetr Mladek2-4/+4
USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23usb: wusbcore: fix device disconnect on rekey timeoutThomas Pugliese2-1/+19
If three or more wireless devices are connected and two of them disconnect between 1-3 seconds apart, it can cause the HWA to disconnect the remaining devices due to failing to see a DN_Alive message from them. This happens because when the HWA detects that the first device is gone, it will attempt to rekey the remaining devices. If one of the devices is not responding because it has also been disconnected but not yet timed out, the synchronous rekey operation running on the wusbd workqueue can block for up to 5 seconds. This will prevent the KEEPALIVE timer from running and DN_Alive messages from being processed because they are processed by the same workqueue. This patch moves the rekey operation to a separate workqueue since it is the only wusb work item that needs to communicate directly with wireless devices. The rest of the WUSB work items either perform no device IO or communicate directly with the host controller and should not be blocked out by a non-responding wireless device. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23usb: wusbcore: skip done segs before completing aborted transferThomas Pugliese1-3/+14
When completing an aborted transfer, skip done segs before calling wa_complete_remaining_xfer_segs to avoid a runtime warning. The warning is harmless in this case but avoiding it prevents false error reports. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.