aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-01-02usb: dwc2: fix flags for DMA descriptor allocation in dwc2_hsotg_ep_enableMarek Szyprowski1-1/+1
dwc2_hsotg_ep_enable can be called from interrupt context, so all allocations should be done with GFP_ATOMIC flags. This fixes following issue on ARM architecture: [<c010d830>] (unwind_backtrace) from [<c010a51c>] (show_stack+0x10/0x14) [<c010a51c>] (show_stack) from [<c032930c>] (dump_stack+0x74/0x94) [<c032930c>] (dump_stack) from [<c011cd30>] (__warn+0xd4/0x100) [<c011cd30>] (__warn) from [<c011cd7c>] (warn_slowpath_null+0x20/0x28) [<c011cd7c>] (warn_slowpath_null) from [<c0187e04>] (smp_call_function_many+0xcc/0x2a4) [<c0187e04>] (smp_call_function_many) from [<c0188014>] (on_each_cpu_mask+0x38/0xa8) [<c0188014>] (on_each_cpu_mask) from [<c01ddfe0>] (start_isolate_page_range+0x134/0x1b8) [<c01ddfe0>] (start_isolate_page_range) from [<c01a3c14>] (alloc_contig_range+0xac/0x2f8) [<c01a3c14>] (alloc_contig_range) from [<c01de3e4>] (cma_alloc+0xe0/0x1a8) [<c01de3e4>] (cma_alloc) from [<c0110acc>] (__alloc_from_contiguous+0x38/0xe0) [<c0110acc>] (__alloc_from_contiguous) from [<c0110ba4>] (cma_allocator_alloc+0x30/0x38) [<c0110ba4>] (cma_allocator_alloc) from [<c0111034>] (__dma_alloc+0x1c0/0x2c8) [<c0111034>] (__dma_alloc) from [<c01111b4>] (arm_dma_alloc+0x3c/0x48) [<c01111b4>] (arm_dma_alloc) from [<c04ad800>] (dwc2_hsotg_ep_enable+0xec/0x46c) [<c04ad800>] (dwc2_hsotg_ep_enable) from [<c04da610>] (usb_ep_enable+0x2c/0x3c) [<c04da610>] (usb_ep_enable) from [<c04dc0c0>] (ecm_set_alt+0xa8/0x154) [<c04dc0c0>] (ecm_set_alt) from [<c04d678c>] (composite_setup+0xd74/0x1540) [<c04d678c>] (composite_setup) from [<c04ae048>] (dwc2_hsotg_complete_setup+0xb8/0x370) [<c04ae048>] (dwc2_hsotg_complete_setup) from [<c04d987c>] (usb_gadget_giveback_request+0xc/0x10) [<c04d987c>] (usb_gadget_giveback_request) from [<c04acafc>] (dwc2_hsotg_complete_request+0x78/0x128) [<c04acafc>] (dwc2_hsotg_complete_request) from [<c04aed28>] (dwc2_hsotg_epint+0x69c/0x81c) [<c04aed28>] (dwc2_hsotg_epint) from [<c04af6c4>] (dwc2_hsotg_irq+0xfc/0x748) [<c04af6c4>] (dwc2_hsotg_irq) from [<c0163264>] (__handle_irq_event_percpu+0x58/0x140) [<c0163264>] (__handle_irq_event_percpu) from [<c0163368>] (handle_irq_event_percpu+0x1c/0x58) [<c0163368>] (handle_irq_event_percpu) from [<c01633dc>] (handle_irq_event+0x38/0x5c) [<c01633dc>] (handle_irq_event) from [<c01666e4>] (handle_fasteoi_irq+0xc4/0x19c) [<c01666e4>] (handle_fasteoi_irq) from [<c0162a2c>] (generic_handle_irq+0x18/0x28) [<c0162a2c>] (generic_handle_irq) from [<c0162b40>] (__handle_domain_irq+0x6c/0xe4) [<c0162b40>] (__handle_domain_irq) from [<c0101470>] (gic_handle_irq+0x50/0x9c) [<c0101470>] (gic_handle_irq) from [<c010b00c>] (__irq_svc+0x6c/0xa8) Fixes: 5f54c54b0ba83 ("usb: dwc2: gadget: Add DDMA chain pointers to dwc2_hsotg_ep structure") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc3: pci: Add "linux,sysdev_is_parent" propertyJohn Youn1-10/+3
Calling platform_device_add_properties() replaces existing properties so the "linux,sysdev_is_parent" property doesn't get set. Add this property to each platform. Fixes: d64ff406e51e ("usb: dwc3: use bus->sysdev for DMA configuration") Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc3: omap: fix race of pm runtime with irq handler in probeGrygorii Strashko1-2/+4
Now races can happen between interrupt handler execution and PM runtime in error handling code path in probe and in dwc3_omap_remove() which will lead to system crash: in probe: ... err1: pm_runtime_put_sync(dev); ^^ PM runtime can race with IRQ handler when deferred probing happening due to extcon pm_runtime_disable(dev); return ret; in dwc3_omap_remove: ... dwc3_omap_disable_irqs(omap); ^^ IRQs are disabled in HW, but handler may still run of_platform_depopulate(omap->dev); pm_runtime_put_sync(&pdev->dev); ^^ PM runtime can race with IRQ handler pm_runtime_disable(&pdev->dev); return 0; So, OMAP DWC3 IRQ need to be disabled before calling pm_runtime_put() in probe and in dwc3_omap_remove(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02USB: gadgetfs: remove unnecessary assignmentAlan Stern1-1/+0
The dev_config() routine in gadgetfs has a check that dev->dev->bNumConfigurations is equal to 1, and then contains a redundant line of code setting the value to 1. This patch removes the unnecessary assignment. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02USB: gadgetfs: fix checks of wTotalLength in config descriptorsAlan Stern1-3/+7
Andrey Konovalov's fuzz testing of gadgetfs showed that we should improve the driver's checks for valid configuration descriptors passed in by the user. In particular, the driver needs to verify that the wTotalLength value in the descriptor is not too short (smaller than USB_DT_CONFIG_SIZE). And the check for whether wTotalLength is too large has to be changed, because the driver assumes there is always enough room remaining in the buffer to hold a device descriptor (at least USB_DT_DEVICE_SIZE bytes). This patch adds the additional check and fixes the existing check. It may do a little more than strictly necessary, but one extra check won't hurt. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02USB: gadgetfs: fix use-after-free bugAlan Stern1-0/+2
Andrey Konovalov reports that fuzz testing with syzkaller causes a KASAN use-after-free bug report in gadgetfs: BUG: KASAN: use-after-free in gadgetfs_setup+0x208a/0x20e0 at addr ffff88003dfe5bf2 Read of size 2 by task syz-executor0/22994 CPU: 3 PID: 22994 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006df06a18 ffffffff81f96aba ffffffffe0528500 1ffff1000dbe0cd6 ffffed000dbe0cce ffff88006df068f0 0000000041b58ab3 ffffffff8598b4c8 ffffffff81f96828 1ffff1000dbe0ccd ffff88006df06708 ffff88006df06748 Call Trace: <IRQ> [ 201.343209] [< inline >] __dump_stack lib/dump_stack.c:15 <IRQ> [ 201.343209] [<ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159 [< inline >] print_address_description mm/kasan/report.c:197 [<ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286 [< inline >] kasan_report mm/kasan/report.c:306 [<ffffffff817e562a>] __asan_report_load_n_noabort+0x3a/0x40 mm/kasan/report.c:337 [< inline >] config_buf drivers/usb/gadget/legacy/inode.c:1298 [<ffffffff8322c8fa>] gadgetfs_setup+0x208a/0x20e0 drivers/usb/gadget/legacy/inode.c:1368 [<ffffffff830fdcd0>] dummy_timer+0x11f0/0x36d0 drivers/usb/gadget/udc/dummy_hcd.c:1858 [<ffffffff814807c1>] call_timer_fn+0x241/0x800 kernel/time/timer.c:1308 [< inline >] expire_timers kernel/time/timer.c:1348 [<ffffffff81482de6>] __run_timers+0xa06/0xec0 kernel/time/timer.c:1641 [<ffffffff814832c1>] run_timer_softirq+0x21/0x80 kernel/time/timer.c:1654 [<ffffffff84f4af8b>] __do_softirq+0x2fb/0xb63 kernel/softirq.c:284 The cause of the bug is subtle. The dev_config() routine gets called twice by the fuzzer. The first time, the user data contains both a full-speed configuration descriptor and a high-speed config descriptor, causing dev->hs_config to be set. But it also contains an invalid device descriptor, so the buffer containing the descriptors is deallocated and dev_config() returns an error. The second time dev_config() is called, the user data contains only a full-speed config descriptor. But dev->hs_config still has the stale pointer remaining from the first call, causing the routine to think that there is a valid high-speed config. Later on, when the driver dereferences the stale pointer to copy that descriptor, we get a use-after-free access. The fix is simple: Clear dev->hs_config if the passed-in data does not contain a high-speed config descriptor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02USB: gadgetfs: fix unbounded memory allocation bugAlan Stern1-1/+1
Andrey Konovalov reports that fuzz testing with syzkaller causes a KASAN warning in gadgetfs: BUG: KASAN: slab-out-of-bounds in dev_config+0x86f/0x1190 at addr ffff88003c47e160 Write of size 65537 by task syz-executor0/6356 CPU: 3 PID: 6356 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88003c107ad8 ffffffff81f96aba ffffffff3dc11ef0 1ffff10007820eee ffffed0007820ee6 ffff88003dc11f00 0000000041b58ab3 ffffffff8598b4c8 ffffffff81f96828 ffffffff813fb4a0 ffff88003b6eadc0 ffff88003c107738 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96aba>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff817e4dec>] kasan_object_err+0x1c/0x70 mm/kasan/report.c:159 [< inline >] print_address_description mm/kasan/report.c:197 [<ffffffff817e5080>] kasan_report_error+0x1f0/0x4e0 mm/kasan/report.c:286 [<ffffffff817e5705>] kasan_report+0x35/0x40 mm/kasan/report.c:306 [< inline >] check_memory_region_inline mm/kasan/kasan.c:308 [<ffffffff817e3fb9>] check_memory_region+0x139/0x190 mm/kasan/kasan.c:315 [<ffffffff817e4044>] kasan_check_write+0x14/0x20 mm/kasan/kasan.c:326 [< inline >] copy_from_user arch/x86/include/asm/uaccess.h:689 [< inline >] ep0_write drivers/usb/gadget/legacy/inode.c:1135 [<ffffffff83228caf>] dev_config+0x86f/0x1190 drivers/usb/gadget/legacy/inode.c:1759 [<ffffffff817fdd55>] __vfs_write+0x5d5/0x760 fs/read_write.c:510 [<ffffffff817ff650>] vfs_write+0x170/0x4e0 fs/read_write.c:560 [< inline >] SYSC_write fs/read_write.c:607 [<ffffffff81803a5b>] SyS_write+0xfb/0x230 fs/read_write.c:599 [<ffffffff84f47ec1>] entry_SYSCALL_64_fastpath+0x1f/0xc2 Indeed, there is a comment saying that the value of len is restricted to a 16-bit integer, but the code doesn't actually do this. This patch fixes the warning. It replaces the comment with a computation that forces the amount of data copied from the user in ep0_write() to be no larger than the wLength size for the control transfer, which is a 16-bit quantity. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: gadget: f_fs: Fix possibe deadlockBaolin Wang1-2/+6
When system try to close /dev/usb-ffs/adb/ep0 on one core, at the same time another core try to attach new UDC, which will cause deadlock as below scenario. Thus we should release ffs lock before issuing unregister_gadget_item(). [ 52.642225] c1 ====================================================== [ 52.642228] c1 [ INFO: possible circular locking dependency detected ] [ 52.642236] c1 4.4.6+ #1 Tainted: G W O [ 52.642241] c1 ------------------------------------------------------- [ 52.642245] c1 usb ffs open/2808 is trying to acquire lock: [ 52.642270] c0 (udc_lock){+.+.+.}, at: [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642272] c1 but task is already holding lock: [ 52.642283] c0 (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>] ffs_data_clear+0x30/0x140 [ 52.642285] c1 which lock already depends on the new lock. [ 52.642287] c1 the existing dependency chain (in reverse order) is: [ 52.642295] c0 -> #1 (ffs_lock){+.+.+.}: [ 52.642307] c0 [<ffffffc00012340c>] __lock_acquire+0x20f0/0x2238 [ 52.642314] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642322] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642328] c0 [<ffffffc00066f7bc>] ffs_func_bind+0x504/0x6e8 [ 52.642334] c0 [<ffffffc000654004>] usb_add_function+0x84/0x184 [ 52.642340] c0 [<ffffffc000658ca4>] configfs_composite_bind+0x264/0x39c [ 52.642346] c0 [<ffffffc00065b348>] udc_bind_to_driver+0x58/0x11c [ 52.642352] c0 [<ffffffc00065b49c>] usb_udc_attach_driver+0x90/0xc8 [ 52.642358] c0 [<ffffffc0006598e0>] gadget_dev_desc_UDC_store+0xd4/0x128 [ 52.642369] c0 [<ffffffc0002c14e8>] configfs_write_file+0xd0/0x13c [ 52.642376] c0 [<ffffffc00023c054>] vfs_write+0xb8/0x214 [ 52.642381] c0 [<ffffffc00023cad4>] SyS_write+0x54/0xb0 [ 52.642388] c0 [<ffffffc000085ff0>] el0_svc_naked+0x24/0x28 [ 52.642395] c0 -> #0 (udc_lock){+.+.+.}: [ 52.642401] c0 [<ffffffc00011e3d0>] print_circular_bug+0x84/0x2e4 [ 52.642407] c0 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238 [ 52.642412] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642420] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642427] c0 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642432] c0 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44 [ 52.642439] c0 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140 [ 52.642444] c0 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c [ 52.642450] c0 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c [ 52.642454] c0 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c [ 52.642460] c0 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4 [ 52.642466] c0 [<ffffffc00023dd9c>] ____fput+0x20/0x2c [ 52.642473] c0 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8 [ 52.642482] c0 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c [ 52.642487] c0 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0 [ 52.642494] c0 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c [ 52.642501] c0 [<ffffffc00008a8f0>] do_signal+0x154/0x518 [ 52.642507] c0 [<ffffffc00008af00>] do_notify_resume+0x70/0x78 [ 52.642512] c0 [<ffffffc000085ee8>] work_pending+0x1c/0x20 [ 52.642514] c1 other info that might help us debug this: [ 52.642517] c1 Possible unsafe locking scenario: [ 52.642518] c1 CPU0 CPU1 [ 52.642520] c1 ---- ---- [ 52.642525] c0 lock(ffs_lock); [ 52.642529] c0 lock(udc_lock); [ 52.642533] c0 lock(ffs_lock); [ 52.642537] c0 lock(udc_lock); [ 52.642539] c1 *** DEADLOCK *** [ 52.642543] c1 1 lock held by usb ffs open/2808: [ 52.642555] c0 #0: (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>] ffs_data_clear+0x30/0x140 [ 52.642557] c1 stack backtrace: [ 52.642563] c1 CPU: 1 PID: 2808 Comm: usb ffs open Tainted: G [ 52.642565] c1 Hardware name: Spreadtrum SP9860g Board (DT) [ 52.642568] c1 Call trace: [ 52.642573] c1 [<ffffffc00008b430>] dump_backtrace+0x0/0x170 [ 52.642577] c1 [<ffffffc00008b5c0>] show_stack+0x20/0x28 [ 52.642583] c1 [<ffffffc000422694>] dump_stack+0xa8/0xe0 [ 52.642587] c1 [<ffffffc00011e548>] print_circular_bug+0x1fc/0x2e4 [ 52.642591] c1 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238 [ 52.642595] c1 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642599] c1 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642604] c1 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642608] c1 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44 [ 52.642613] c1 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140 [ 52.642618] c1 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c [ 52.642621] c1 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c [ 52.642625] c1 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c [ 52.642629] c1 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4 [ 52.642633] c1 [<ffffffc00023dd9c>] ____fput+0x20/0x2c [ 52.642636] c1 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8 [ 52.642640] c1 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c [ 52.642644] c1 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0 [ 52.642647] c1 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c [ 52.642651] c1 [<ffffffc00008a8f0>] do_signal+0x154/0x518 [ 52.642656] c1 [<ffffffc00008af00>] do_notify_resume+0x70/0x78 [ 52.642659] c1 [<ffffffc000085ee8>] work_pending+0x1c/0x20 Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc3: skip interrupt when ep disabledJanusz Dziedzic1-3/+8
In case EP disabled pass only EPCPLT command to be handled. In other case we could hit Bug like below. BUG: unable to handle kernel NULL pointer dereference at 0000000000000003 IP: [<ffffffff81673428>] dwc3_thread_interrupt+0x11c8/0x1790 while dep->endpoint.desc is NULL. Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: gadgetfs: restrict upper bound on device configuration sizeGreg Kroah-Hartman1-1/+2
Andrey Konovalov reported that we were not properly checking the upper limit before of a device configuration size before calling memdup_user(), which could cause some problems. So set the upper limit to PAGE_SIZE * 4, which should be good enough for all devices. Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02USB: dummy-hcd: fix bug in stop_activity (handle ep0)Alan Stern1-3/+3
The stop_activity() routine in dummy-hcd is supposed to unlink all active requests for every endpoint, among other things. But it doesn't handle ep0. As a result, fuzz testing can generate a WARNING like the following: WARNING: CPU: 0 PID: 4410 at drivers/usb/gadget/udc/dummy_hcd.c:672 dummy_free_request+0x153/0x170 Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor Not tainted 4.9.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006a64ed10 ffffffff81f96b8a ffffffff41b58ab3 1ffff1000d4c9d35 ffffed000d4c9d2d ffff880065f8ac00 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 0000000041b58ab3 ffffffff859410e0 ffffffff813f0590 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550 [<ffffffff812b831c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [<ffffffff830fcb13>] dummy_free_request+0x153/0x170 drivers/usb/gadget/udc/dummy_hcd.c:672 [<ffffffff830ed1b0>] usb_ep_free_request+0xc0/0x420 drivers/usb/gadget/udc/core.c:195 [<ffffffff83225031>] gadgetfs_unbind+0x131/0x190 drivers/usb/gadget/legacy/inode.c:1612 [<ffffffff830ebd8f>] usb_gadget_remove_driver+0x10f/0x2b0 drivers/usb/gadget/udc/core.c:1228 [<ffffffff830ec084>] usb_gadget_unregister_driver+0x154/0x240 drivers/usb/gadget/udc/core.c:1357 This patch fixes the problem by iterating over all the endpoints in the driver's ep array instead of iterating over the gadget's ep_list, which explicitly leaves out ep0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: gadget: f_fs: Fix ExtCompat descriptor validationVincent Pelletier1-1/+1
Reserved1 is documented as expected to be set to 0, but this test fails when it it set to 0. Reverse the condition. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: gadget: f_fs: Document eventfd effect on descriptor format.Vincent Pelletier1-2/+2
When FUNCTIONFS_EVENTFD flag is set, __ffs_data_got_descs reads a 32bits, little-endian value right after the fixed structure header, and passes it to eventfd_ctx_fdget. Document this. Also, rephrase a comment to be affirmative about the role of string descriptor at index 0. Ref: USB 2.0 spec paragraph "9.6.7 String", and also checked to still be current in USB 3.0 spec paragraph "9.6.9 String". Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: gadget: composite: Test get_alt() presence instead of set_alt()Krzysztof Opasiak1-4/+8
By convention (according to doc) if function does not provide get_alt() callback composite framework should assume that it has only altsetting 0 and should respond with error if host tries to set other one. After commit dd4dff8b035f ("USB: composite: Fix bug: should test set_alt function pointer before use it") we started checking set_alt() callback instead of get_alt(). This check is useless as we check if set_alt() is set inside usb_add_function() and fail if it's NULL. Let's fix this check and move comment about why we check the get method instead of set a little bit closer to prevent future false fixes. Fixes: dd4dff8b035f ("USB: composite: Fix bug: should test set_alt function pointer before use it") Cc: stable <stable@vger.kernel.org> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc3: pci: Fix dr_mode misspellingHans de Goede1-1/+1
usb_get_dr_mode() expects the device-property to be spelled "dr_mode" not "dr-mode". Spelling it properly fixes the following warning showing up in dmesg: [ 8704.500545] dwc3 dwc3.2.auto: Configuration mismatch. dr_mode forced to gadget Signed-off-by: Hans de Goede <hdegoede@redhat.com Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc3: core: avoid Overflow eventsFelipe Balbi1-3/+1
Now that we're handling so many transfers at a time and for some dwc3 revisions LPM events *must* be enabled, we can fall into a situation where too many events fire and we start receiving Overflow events. Let's do what XHCI does and allocate a full page for the Event Ring, this will avoid any future issues. Cc: <stable@vger.kernel.org> # v4.9 Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc3: gadget: always unmap EP0 requestsFelipe Balbi1-4/+4
commit 0416e494ce7d ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") introduced a bug where we would leak DMA resources which would cause us to starve the system of them resulting in failing DMA transfers. Fix the bug by making sure that we always unmap EP0 requests since those are *always* mapped. Fixes: 0416e494ce7d ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") Cc: <stable@vger.kernel.org> Tested-by: Tomasz Medrek <tomaszx.medrek@intel.com> Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc3: ep0: explicitly call dwc3_ep0_prepare_one_trb()Felipe Balbi1-13/+15
Let's call dwc3_ep0_prepare_one_trb() explicitly because there are occasions where we will need more than one TRB to handle an EP0 transfer. A follow-up patch will fix one bug related to multiple-TRB Data Phases when it comes to mapping/unmapping requests for DMA. Cc: <stable@vger.kernel.org> Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc3: ep0: add dwc3_ep0_prepare_one_trb()Felipe Balbi1-10/+16
For now this is just a cleanup patch, no functional changes. We will be using the new function to fix a bug introduced long ago by commit 0416e494ce7d ("usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced") and further worsened by commit c0bd5456a470 ("usb: dwc3: ep0: handle non maxpacket aligned transfers > 512") Cc: <stable@vger.kernel.org> Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc2: gadget: fix default value for gadget-dma-descStefan Wahren1-1/+1
The current default for gadget DMA descriptor results on bcm2835 in a unnecessary error message: Invalid value 1 for param gadget-dma-desc So fix this by using hw->dma_desc_enable as default value. Fixes: dec4b55677e ("usb: dwc2: gadget: Add descriptor DMA parameter") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc2: fix default value for DMA supportStefan Wahren1-2/+2
The current defaults for DMA results on a non-DMA platform in a unnecessary error message: Invalid value 0 for param gadget-dma So fix this by using dma_capable as default value. Fixes: 9962b62f1be ("usb: dwc2: Deprecate g-use-dma binding") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc2: fix dwc2_get_device_property for u8 and u16Stefan Wahren1-12/+0
According to the Devicetree ePAPR [1] the datatypes u8 and u16 are not defined. So using device_property_read_u16() would result in a partial read of a 32-bit big-endian integer which is not intended. So we better read the complete 32-bit value. This fixes a regression on bcm2835 where the values for g-rx-fifo-size and g-np-tx-fifo-size always read as zero: Invalid value 0 for param g-rx-fifo-size Invalid value 0 for param g-np-tx-fifo-size [1] - http://elinux.org/images/c/cf/Power_ePAPR_APPROVED_v1.1.pdf Fixes: 05ee799f202 ("usb: dwc2: Move gadget settings into core_params") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-02usb: dwc2: Do not set host parameter in peripheral modeStefan Wahren1-6/+6
Since commit "usb: dwc2: Improve handling of host and device hwparams" the host mode specific hardware parameter aren't initialized in peripheral mode from the register settings anymore. So we better do not set them in this case which avoids the following warnings on bcm2835: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration. 512 invalid for host_perio_tx_fifo_size. Check HW configuration. Fixes: 55e1040e424b ("usb: dwc2: Improve handling of host and device hwparams") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner4-11/+7
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25ktime: Get rid of the unionThomas Gleixner3-9/+9
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds12-12/+12
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-21Merge branch 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linuxLinus Torvalds1-1/+1
Pull scsi target cleanups from Bart Van Assche: "The changes here are: - a few small bug fixes for the iSCSI and user space target drivers. - minimize the target build time by about 30% by rearranging #include directives - fix the second argument passed to percpu_ida_alloc() - reduce the number of false positive warnings reported by sparse These patches pass Wu Fengguang's build bot tests and also the linux-next tests" * 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux: iscsi-target: Return error if unable to add network portal target: Fix spelling mistake and unwrap multi-line text target/iscsi: Fix double free in lio_target_tiqn_addtpg() target/user: Fix use-after-free of tcmu_cmds if they are expired target: Minimize #include directives target/user: Add an #include directive cxgbit: Add an #include directive ibmvscsi_tgt: Add two #include directives sbp-target: Add an #include directive qla2xxx: Add an #include directive configfs: Minimize #include directives usb: gadget: Fix second argument of percpu_ida_alloc() sbp-target: Fix second argument of percpu_ida_alloc() target/user: Fix a data type in tcmu_queue_cmd() target: Use NULL instead of 0 to represent a pointer
2016-12-16Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-2/+2
Pull vfs updates from Al Viro: - more ->d_init() stuff (work.dcache) - pathname resolution cleanups (work.namei) - a few missing iov_iter primitives - copy_from_iter_full() and friends. Either copy the full requested amount, advance the iterator and return true, or fail, return false and do _not_ advance the iterator. Quite a few open-coded callers converted (and became more readable and harder to fuck up that way) (work.iov_iter) - several assorted patches, the big one being logfs removal * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: logfs: remove from tree vfs: fix put_compat_statfs64() does not handle errors namei: fold should_follow_link() with the step into not-followed link namei: pass both WALK_GET and WALK_MORE to should_follow_link() namei: invert WALK_PUT logics namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link() namei: saner calling conventions for mountpoint_last() namei.c: get rid of user_path_parent() switch getfrag callbacks to ..._full() primitives make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success [iov_iter] new primitives - copy_from_iter_full() and friends don't open-code file_inode() ceph: switch to use of ->d_init() ceph: unify dentry_operations instances lustre: switch to use of ->d_init()
2016-12-15Merge tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-0/+4
Pull PCI updates from Bjorn Helgaas: "PCI changes: - add support for PCI on ARM64 boxes with ACPI. We already had this for theoretical spec-compliant hardware; now we're adding quirks for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene) - add runtime PM support for hotplug ports - enable runtime suspend for Intel UHCI that uses platform-specific wakeup signaling - add yet another host bridge registration interface. We hope this is extensible enough to subsume the others - expose device revision in sysfs for DRM - to avoid device conflicts, make sure any VF BAR updates are done before enabling the VF - avoid unnecessary link retrains for ASPM - allow INTx masking on Mellanox devices that support it - allow access to non-standard VPD for Chelsio devices - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA, etc - update Rockchip support for max-link-speed - add NVIDIA Tegra210 support - add Layerscape LS1046a support - update R-Car compatibility strings - add Qualcomm MSM8996 support - remove some uninformative bootup messages" * tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits) PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h x86/platform/intel-mid: Constify mid_pci_platform_pm PCI/ASPM: Don't retrain link if ASPM not possible PCI: iproc: Skip check for legacy IRQ on PAXC buses PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar PCI: rcar: Use gen2 fallback compatibility last PCI: rcar-gen2: Use gen2 fallback compatibility last PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() ..
2016-12-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-6/+6
Merge more updates from Andrew Morton: - a few misc things - kexec updates - DMA-mapping updates to better support networking DMA operations - IPC updates - various MM changes to improve DAX fault handling - lots of radix-tree changes, mainly to the test suite. All leading up to reimplementing the IDA/IDR code to be a wrapper layer over the radix-tree. However the final trigger-pulling patch is held off for 4.11. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) radix tree test suite: delete unused rcupdate.c radix tree test suite: add new tag check radix-tree: ensure counts are initialised radix tree test suite: cache recently freed objects radix tree test suite: add some more functionality idr: reduce the number of bits per level from 8 to 6 rxrpc: abstract away knowledge of IDR internals tpm: use idr_find(), not idr_find_slowpath() idr: add ida_is_empty radix tree test suite: check multiorder iteration radix-tree: fix replacement for multiorder entries radix-tree: add radix_tree_split_preload() radix-tree: add radix_tree_split radix-tree: add radix_tree_join radix-tree: delete radix_tree_range_tag_if_tagged() radix-tree: delete radix_tree_locate_item() radix-tree: improve multiorder iterators btrfs: fix race in btrfs_free_dummy_fs_info() radix-tree: improve dump output radix-tree: make radix_tree_find_next_bit more useful ...
2016-12-14idr: add ida_is_emptyMatthew Wilcox2-6/+6
Two of the USB Gadgets were poking around in the internals of struct ida in order to determine if it is empty. Add the appropriate abstraction. Link: http://lkml.kernel.org/r/1480369871-5271-63-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-1/+1
Pull trivial updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: NTB: correct ntb_spad_count comment typo misc: ibmasm: fix typo in error message Remove references to dead make variable LINUX_INCLUDE Remove last traces of ikconfig.h treewide: Fix printk() message errors Documentation/device-mapper: s/getsize/getsz/
2016-12-14Merge tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfsLinus Torvalds2-25/+8
Pull configfs update from Christoph Hellwig: "Just one simple change from Andrzej to drop the pointless return value from the ->drop_link method" * tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfs: fs: configfs: don't return anything from drop_link
2016-12-14treewide: Fix printk() message errorsMasanari Iida1-1/+1
This patch fix spelling typos in printk and kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-13Merge tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds1-43/+12
Pull tty/serial updates from Greg KH: "Here's the tty/serial patchset for 4.10-rc1. It's been a quiet kernel cycle for this subsystem, just a small number of changes. A few new serial drivers, and some cleanups to the old vgacon logic, and other minor serial driver changes as well. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits) serial: 8250_mid fix calltrace when hotplug 8250 serial controller console: Move userspace I/O out of console_lock to fix lockdep warning tty: nozomi: avoid sprintf buffer overflow serial: 8250_pci: Detach low-level driver during PCI error recovery serial: core: don't check port twice in a row mxs-auart: count FIFO overrun errors serial: 8250_dw: Add support for IrDA SIR mode serial: 8250: Expose set_ldisc function serial: 8250: Add IrDA to UART capabilities serial: 8250_dma: power off device after TX is done serial: 8250_port: export serial8250_rpm_{get|put}_tx() serial: sunsu: Free memory when probe fails serial: sunhv: Free memory when remove() is called vt: fix Scroll Lock LED trigger name tty: typo in comments in drivers/tty/vt/keyboard.c tty: amba-pl011: Add earlycon support for SBSA UART tty: nozomi: use permission-specific DEVICE_ATTR variants tty: serial: Make the STM32 serial port depend on it's arch serial: ifx6x60: Free memory when probe fails serial: ioc4_serial: Free memory when kzalloc fails during probe ...
2016-12-13Merge tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds171-3988/+12575
Pull USB/PHY updates from Greg KH: "Here's the big set of USB/PHY patches for 4.10-rc1. A number of new drivers are here in this set of changes. We have a new USB controller type "mtu3", a new usb-serial driver, and the usual churn in the gadget subsystem and the xhci host controller driver, along with a few other new small drivers added. And lots of little other changes all over the USB and PHY driver tree. Full details are in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits) USB: serial: option: add dlink dwm-158 USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 USB: OHCI: nxp: fix code warnings USB: OHCI: nxp: remove useless extern declaration USB: OHCI: at91: remove useless extern declaration usb: misc: rio500: fix result type for error message usb: mtu3: fix U3 port link issue usb: mtu3: enable auto switch from U3 to U2 usbip: fix warning in vhci_hcd_probe/lockdep_init_map usb: core: usbport: Use proper LED API to fix potential crash usbip: add missing compile time generated files to .gitignore usb: hcd.h: construct hub class request constants from simpler constants USB: OHCI: ohci-pxa27x: remove useless functions USB: OHCI: omap: remove useless extern declaration USB: OHCI: ohci-omap: remove useless functions USB: OHCI: ohci-s3c2410: remove useless functions USB: cdc-acm: add device id for GW Instek AFG-125 fsl/usb: Workarourd for USB erratum-A005697 usb: hub: Wait for connection to be reestablished after port reset usbip: vudc: Refactor init_vudc_hw() to be more obvious ...
2016-12-09usb: gadget: Fix second argument of percpu_ida_alloc()Bart Van Assche1-1/+1
Pass a task state as second argument to percpu_ida_alloc(). Fixes: commit 71e7ae8e1fb2 ("usb-gadget/tcm: Conversion to percpu_ida tag pre-allocation") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-12-09USB: serial: option: add dlink dwm-158Giuseppe Lippolis1-0/+1
Adding registration for 3G modem DWM-158 in usb-serial-option Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-09USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041Daniele Palmas1-0/+6
This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A. Since the interface positions are the same than the ones used for other Telit compositions, previous defined blacklists are used. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-08USB: OHCI: nxp: fix code warningsManjunath Goudar1-2/+3
This patch will fix the checkpatch.pl following warnings: WARNING: Missing a blank line after declarations WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-08USB: OHCI: nxp: remove useless extern declarationManjunath Goudar1-2/+0
Remove usb_disabled() extern declaration as it is already declared as extern in include/linux/usb.h. Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-08USB: OHCI: at91: remove useless extern declarationManjunath Goudar1-2/+0
Remove usb_disabled() extern declaration as it is already declared as extern in include/linux/usb.h. Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-08usb: misc: rio500: fix result type for error messageKim Jae Joong1-1/+1
Fix variable type for dev_err about usb_bulk_msg() Signed-off-by: Kim Jae Joong <climbbb.kim@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-07usb: mtu3: fix U3 port link issueChunfeng Yun1-8/+10
the issue is introduced when @is_u3_ip is used in mtu3_device_enabe() before initialized in mtu3_mem_alloc(), so get global IP information at first before used by following functins. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-07usb: mtu3: enable auto switch from U3 to U2Chunfeng Yun1-0/+2
inform mac2 to build U2 link automatically after U3 detect fail without software setting soft_connect. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06usbip: fix warning in vhci_hcd_probe/lockdep_init_mapShuah Khan1-0/+1
vhci_hcd calls sysfs_create_group() with dynamically allocated sysfs attributes triggering the lock-class key not persistent warning. Call sysfs_attr_init() for dynamically allocated sysfs attributes to fix it. vhci_hcd vhci_hcd: USB/IP Virtual Host Controller vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 2 BUG: key ffff88006a7e8d18 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3131 lockdep_init_map+0x60c/0x770 DEBUG_LOCKS_WARN_ON(1)[ 1.567044] Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc7+ #58 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006bce6eb8 ffffffff81f96c8a ffffffff00000a02 1ffff1000d79cd6a ffffed000d79cd62 000000046bce6ed8 0000000041b58ab3 ffffffff8598af40 ffffffff81f969f8 0000000000000000 0000000041b58ab3 0000000000000200 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96c8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff813f3efc>] lockdep_init_map+0x60c/0x770 kernel/locking/lockdep.c:3131 [<ffffffff819e43d4>] __kernfs_create_file+0x114/0x2a0 fs/kernfs/file.c:954 [<ffffffff819e68f5>] sysfs_add_file_mode_ns+0x225/0x520 fs/sysfs/file.c:305 [< inline >] create_files fs/sysfs/group.c:64 [<ffffffff819e8a89>] internal_create_group+0x239/0x8f0 fs/sysfs/group.c:134 [<ffffffff819e915f>] sysfs_create_group+0x1f/0x30 fs/sysfs/group.c:156 [<ffffffff8323de24>] vhci_start+0x5b4/0x7a0 drivers/usb/usbip/vhci_hcd.c:978 [<ffffffff82c907ca>] usb_add_hcd+0x8da/0x1c60 drivers/usb/core/hcd.c:2867 [<ffffffff8323bc57>] vhci_hcd_probe+0x97/0x130 drivers/usb/usbip/vhci_hcd.c:1103 --- --- ---[ end trace c33c7b202cf3aac8 ]--- Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06usb: core: usbport: Use proper LED API to fix potential crashRafał Miłecki1-4/+3
Calling brightness_set manually isn't safe as some LED drivers don't implement this callback. The best idea is to just use a proper helper which will fallback to the brightness_set_blocking callback if needed. This fixes: [ 1461.761528] Unable to handle kernel NULL pointer dereference at virtual address 00000000 (...) [ 1462.117049] Backtrace: [ 1462.119521] [<bf228164>] (usbport_trig_port_store [ledtrig_usbport]) from [<c023f758>] (dev_attr_store+0x20/0x2c) [ 1462.129826] r7:dcabc7c0 r6:dee0ff80 r5:00000002 r4:bf228164 [ 1462.135511] [<c023f738>] (dev_attr_store) from [<c0169310>] (sysfs_kf_write+0x48/0x4c) [ 1462.143459] r5:00000002 r4:c023f738 [ 1462.147049] [<c01692c8>] (sysfs_kf_write) from [<c0168ab8>] (kernfs_fop_write+0xf8/0x1f8) [ 1462.155258] r5:00000002 r4:df4a1000 [ 1462.158850] [<c01689c0>] (kernfs_fop_write) from [<c0100c78>] (__vfs_write+0x34/0x120) [ 1462.166800] r10:00000000 r9:dee0e000 r8:c000fc24 r7:00000002 r6:dee0ff80 r5:c01689c0 [ 1462.174660] r4:df727a80 [ 1462.177204] [<c0100c44>] (__vfs_write) from [<c0101ae4>] (vfs_write+0xac/0x170) [ 1462.184543] r9:dee0e000 r8:c000fc24 r7:dee0ff80 r6:b6f092d0 r5:df727a80 r4:00000002 [ 1462.192319] [<c0101a38>] (vfs_write) from [<c01028dc>] (SyS_write+0x4c/0xa8) [ 1462.199396] r9:dee0e000 r8:c000fc24 r7:00000002 r6:b6f092d0 r5:df727a80 r4:df727a80 [ 1462.207174] [<c0102890>] (SyS_write) from [<c000fa60>] (ret_fast_syscall+0x0/0x3c) [ 1462.214774] r7:00000004 r6:ffffffff r5:00000000 r4:00000000 [ 1462.220456] Code: bad PC value [ 1462.223560] ---[ end trace 676638a3a12c7a56 ]--- Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 0f247626cbb ("usb: core: Introduce a USB port LED trigger") Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-05[iov_iter] new primitives - copy_from_iter_full() and friendsAl Viro2-2/+2
copy_from_iter_full(), copy_from_iter_full_nocache() and csum_and_copy_from_iter_full() - counterparts of copy_from_iter() et.al., advancing iterator only in case of successful full copy and returning whether it had been successful or not. Convert some obvious users. *NOTE* - do not blindly assume that something is a good candidate for those unless you are sure that not advancing iov_iter in failure case is the right thing in this case. Anything that does short read/short write kind of stuff (or is in a loop, etc.) is unlikely to be a good one. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-12-05USB: OHCI: ohci-pxa27x: remove useless functionsManjunath Goudar1-26/+10
The ohci_hcd_pxa27x_drv_probe function is not doing anything other than calling usb_hcd_pxa27x_probe function so ohci_hcd_pxa27x_drv_probe function is useless that is why removed ohci_hcd_pxa27x_drv_probe function and renamed usb_hcd_pxa27x_probe function to ohci_hcd_pxa27x_drv_probe for proper naming. The ohci_hcd_pxa27x_remove function is also not doing anything other than calling usb_hcd_pxa27x_remove that is why removed ohci_hcd_pxa27x_remove function and renamed usb_hcd_pxa27x_remove to ohci_hcd_pxa27x_remove for proper naming. Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-05USB: OHCI: omap: remove useless extern declarationManjunath Goudar1-3/+0
Remove usb_disabled() and ocpi_enable() extern declaration as it is already declared as EXPORT_SYMBOL_GPL declaration. Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.