aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-10-30USB: fsl_udc_core: Fix kernel oops on module removalAnton Vorontsov1-1/+1
fsl_udc_release() calls dma_free_coherent() with an inappropriate device passed to it, and since the device has no dma_ops, the following oops pops up: Kernel BUG at d103ce9c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [d103ce9c] fsl_udc_release+0x50/0x80 [fsl_usb2_udc] LR [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] Call Trace: [cfbc7dc0] [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] [cfbc7dd0] [c01a35c4] device_release+0x2c/0x90 [cfbc7de0] [c016b480] kobject_cleanup+0x58/0x98 [cfbc7e00] [c016c52c] kref_put+0x54/0x6c [cfbc7e10] [c016b360] kobject_put+0x34/0x64 [cfbc7e20] [c01a1d0c] put_device+0x1c/0x2c [cfbc7e30] [d103dbfc] fsl_udc_remove+0xc0/0x1e4 [fsl_usb2_udc] ... This patch fixes the issue by passing dev->parent, which points to a correct device. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Li Yang <leoli@freescale.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: option: TLAYTECH TUE800 supportBryan Wu1-0/+4
Add ID for Tlaytech TUE800 CDMA modem to the option driver. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-By: Matthias Urlichs <matthias@urlichs.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is setYoshihiro Shimoda1-10/+13
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: serial: sierra driver autopm fixesElina Pasheva1-6/+8
This patch presents fixes for the autosuspend feature implementation in sierra usb serial driver in functions sierra_open(), sierra_close() and stop_read_write_urbs(). The patch "sierra_close() must resume the device before it notifies it of a closure" submitted by Oliver Neukum on Wed, October 14 has been merged as fix in sierra_close() function. The bug fix in sierra_open() function restores the autopm interface state on error condition. The bug fix in in stop_read_write_urbs() function assures that both receive and interrupt urbs are recycled. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30USB: serial: sierra driver send_setup() autopm fixElina Pasheva1-10/+14
This patch presents a fix for the autosuspend feature implementation in sierra usb serial driver for function sierra_send_setup(). Because it is possible to call sierra_send_setup() before sierra_open() or after sierra_close() we added a get/put interface activity to assure that the usb control can happen even when the device is autosuspended. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Tested-by: Matthew Safar <msafar@sierrawireless.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-21ARM: Fix lubbock defconfig buildRussell King1-0/+1
drivers/built-in.o: In function `pxa25x_udc_probe': drivers/usb/gadget/pxa25x_udc.c:2195: undefined reference to `otg_get_transceiver' drivers/usb/gadget/pxa25x_udc.c:2300: undefined reference to `otg_put_transceiver' pxa25x_udc.c unconditionally uses these two functions, so we need to ensure that the object providing them is also built. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-14USB: gadget: Fix EEM driver comments and VID/PIDBrian Niebuhr1-7/+2
Remove expository comments and fix USB VID and PID Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14usb-storage: Workaround devices with bogus sense sizeBenjamin Herrenschmidt1-1/+16
usb-storage: Workaround devices with bogus sense size Some devices, such as Huawei E169, advertise more than the standard amount of sense data, causing us to set US_FL_SANE_SENSE, assuming they support it. However, they subsequently fail the request sense with that size. This works around it generically. When a sense request fails due to a device returning an error, US_FL_SANE_SENSE was set, and that sense request used a larger sense size, we retry with a smaller size before giving up. Based on an original patch by Ben Efros <ben@pc-doctor.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: ehci: Fix IST boundary checking interval math.Sarah Sharp1-6/+6
When the EHCI driver falls behind in its scheduling, the active stream's first empty microframe may be in the past with respect to the current microframe. The code attempts to move the starting microframe ("start") N number of microframes forward, where N is the interval of endpoint. However, stream->interval is a copy of the endpoint's bInterval, which is designated in frames for FS devices, and microframes for HS devices. Convert stream->interval to microframes before using it to move the starting microframe forward. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: option: Support for AIRPLUS MCD650 DatacardHuzaifa Sidhpurwala1-0/+4
Here is a patch for Airplus MCD 650 card Note: This device is with Victor V Kudlak, and he confirmed that this device works with the patch. Signed-off-by: Huzaifa Sidhpurwala <sidhpurwala.huzaifa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: whci-hcd: always do an update after processing a halted qTDDavid Vrabel2-0/+8
A halted qTD always triggers a hardware list update because the qset was either removed or reactivated. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: whci-hcd: handle early deletion of endpointsDavid Vrabel2-14/+25
If an endpoint is deleted before it's been fully added to the hardware list, the associated qset will not be fully initialized and an oops will occur when complete(&qset->remove_complete) is called. This can happen if a queued URB is cancelled. Fix this by only removing the qset from the hardware list if the cancelled URB had qTDs. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-14USB: wusb: don't use the stack to read security descriptorStefano Panella1-22/+19
An urb's transfer buffer must be kmalloc'd memory and not point to the stack or a DMA API warning results. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-12USB: musb: invert arch depend stringMike Frysinger1-1/+1
The MUSB code relies on platform implementations that currently only exists for Arm and Blackfin processors, so have the MUSB Kconfig depend upon those arches. This should prevent other arches from building MUSB via randconfig. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-11Revert "USB: Work around BIOS bugs by quiescing USB controllers earlier"Linus Torvalds1-1/+1
This reverts commit db8be50c4307dac2b37305fc59c8dc0f978d09ea, as per http://bugzilla.kernel.org/show_bug.cgi?id=14374 http://marc.info/?l=linux-kernel&m=125446885705223&w=4 We simply can't do the USB handoff at FIXUP_HEADER time, since it will often require us to have valid IO mappings etc. But that in turn requires a whole different approach, not this trivial one-liner. Maybe we could teach all the USB quirk handoff handlers to only do the quirk if the device has all its registers set up (since if it isn't initialized, it's unlikely to be active), but regardless that will need a whole lot more code than just saying "let's do it really early". The proper fix is almost certainly to just leave the legacy IOMMU mappings active until after all devices have been initialized. Reported-by: Nick Piggin <npiggin@suse.de> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds34-412/+315
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (32 commits) USB: serial: no unnecessary GFP_ATOMIC in oti6858 USB: serial: fix race between unthrottle and completion handler in visor USB: serial: fix assumption that throttle/unthrottle cannot sleep USB: serial: fix race between unthrottle and completion handler in symbolserial USB: serial: fix race between unthrottle and completion handler in opticon USB: ehci: Fix isoc scheduling boundary checking. USB: storage: When a device returns no sense data, call it a Hardware Error USB: small fix in error case of suspend in generic usbserial code USB: visor: fix trivial accounting bug in visor driver USB: Fix throttling in generic usbserial driver USB: cp210x: Add support for the DW700 UART USB: ipaq: fix oops when device is plugged in USB: isp1362: fix build warnings on 64-bit systems USB: gadget: imx_udc: Use resource size USB: storage: iRiver P7 UNUSUAL_DEV patch USB: musb: make HAVE_CLK support optional USB: xhci: Fix dropping endpoints from the xHC schedule. USB: xhci: Don't wait for a disable slot cmd when HC dies. USB: xhci: Handle canceled URBs when HC dies. USB: xhci: Stop debugging polling loop when HC dies. ...
2009-10-09USB: serial: no unnecessary GFP_ATOMIC in oti6858Oliver Neukum1-3/+3
GFP_ATOMIC without good cause is evil. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: serial: fix race between unthrottle and completion handler in visorOliver Neukum1-6/+9
usb:usbserial:visor: fix race between unthrottle and completion handler visor_unthrottle() mustn't resubmit the URB unconditionally as the URB may still be running. the same bug as opticon. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: serial: fix assumption that throttle/unthrottle cannot sleepOliver Neukum10-51/+37
many serial subdrivers are clearly written as if throttle/unthrottle cannot sleep. This leads to unneeded atomic submissions. This patch converts affected drivers in a way to makes very clear that throttle/unthrottle can sleep. Thus future misdesigns can be avoided and efficiency and reliability improved. This removes any such assumption using GFP_KERNEL and spin_lock_irq() Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: serial: fix race between unthrottle and completion handler in symbolserialOliver Neukum1-4/+8
usb:usbserial:symbolserial: fix race between unthrottle and completion handler symbol_unthrottle() mustn't resubmit the URB unconditionally as the URB may still be running. the same bug as opticon. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: serial: fix race between unthrottle and completion handler in opticonOliver Neukum1-5/+8
usb:usbserial:opticon: fix race between unthrottle and completion handler opticon_unthrottle() mustn't resubmit the URB unconditionally as the URB may still be running. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: ehci: Fix isoc scheduling boundary checking.Sarah Sharp1-0/+1
The EHCI driver does some bounds checking when it's scheduling an iTD for an active endpoint. It sets the local variable start to stream->next_uframe and moves that variable further in the schedule if necessary. However, the driver fails to do anything with start before jumping to the ready label and setting the URB's starting frame to stream->next_uframe. Alan Stern confirms the EHCI driver should set stream->next_uframe to start before jumping. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: storage: When a device returns no sense data, call it a Hardware ErrorAlan Stern1-7/+22
This patch (as1294) fixes a problem that has plagued users for several kernel releases. Some USB mass-storage devices don't return any sense data when they encounter certain kinds of errors. The SCSI layer interprets this to mean that the operation should be retried, and the same thing happens -- over and over again with no limit. In some circumstances (such as when a bus reset occurs) that is the right thing to do, but not here. The patch checks for this condition (a transport failure with no sense data) and changes the result code to DID_ERROR and the sense code to Hardware Error. This does get only a limited number of retries, and so the command will fail relatively quickly instead of getting stuck in an infinite loop. This fixes a large part of Bugzilla #14118. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Mantas Mikulenas <grawity@gmail.com> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: small fix in error case of suspend in generic usbserial codeOliver Neukum1-1/+3
usb:usbserial: fix flags in error case of suspension suspended flag must be reset in error case Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: visor: fix trivial accounting bug in visor driverOliver Neukum1-1/+2
usb:usbserial:visor: fix accounting in error case data not pushed to the tty layer due to an error mustn't be counted Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: Fix throttling in generic usbserial driverJoris van Rantwijk1-1/+1
The generic usbserial driver in Linux 2.6.31 halts its receiving channel in response to throttle requests from the line discipline. Unfortunately it drops the contents of the first URB received after throttling takes effect. This patch corrects that problem. Signed-off-by: Joris van Rantwijk <jorispubl@xs4all.nl> Acked-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: cp210x: Add support for the DW700 UARTÉric Piel1-0/+1
In the Dell inspiron mini 10, the GPS is connected via a cp2102. This patch adds detection of this USB device. (I haven't managed to use the GPS under Linux yet, though) Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: ipaq: fix oops when device is plugged inAlan Stern1-0/+9
This patch (as1293) fixes a problem with the ipaq serial driver. It tries to bind to all the interfaces, even those that don't have enough endpoints. The symptom is an invalid memory reference and oops when the device is plugged in. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: stable <stable@kernel.org> Tested-by: Matthias Geissert <geissert@mathematik.tu-darmstadt.de> Tested-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: isp1362: fix build warnings on 64-bit systemsMike Frysinger2-15/+15
A bunch of places assumed pointers were 32-bits in size (bit checking and debug output), but none of these affected runtime functionality. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: gadget: imx_udc: Use resource sizeTobias Klauser1-4/+4
Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: storage: iRiver P7 UNUSUAL_DEV patchSergey Pinaev1-0/+7
Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: musb: make HAVE_CLK support optionalMike Frysinger4-11/+8
The Blackfin port doesn't support HAVE_CLK and the musb driver works fine with support stubbed out, so take the existing Blackfin clk stubs and move them to common musb code so we can drop the Kconfig dependency. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: xhci: Fix dropping endpoints from the xHC schedule.Sarah Sharp1-1/+1
When an endpoint is to be dropped from the hardware bandwidth schedule, we want to clear its add flag. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: xhci: Don't wait for a disable slot cmd when HC dies.Sarah Sharp1-0/+9
When the host controller dies or is removed while a device is plugged in, the USB core will attempt to deallocate the struct usb_device. That will call into xhci_free_dev(). This function used to attempt to submit a disable slot command to the host controller and clean up the device structures when that command returned. Change xhci_free_dev() to skip the command submission and just free the memory if the host controller died. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: xhci: Handle canceled URBs when HC dies.Sarah Sharp1-0/+12
When the host controller dies (e.g. it is removed from a PCI card slot), the xHCI driver cannot expect commands to complete. The buggy code this patch fixes would mark an URB as canceled and then expect the URB to be completed when the stop endpoint command completed. That would never happen if the host controller was dead, so the USB core would just hang in the disconnect code. If the host controller died, and the driver asks to cancel an URB, free any structures associated with that URB and immediately give it back. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: xhci: Stop debugging polling loop when HC dies.Sarah Sharp1-0/+6
If the host controller card is removed from the system, stop the timer function to debug the xHCI rings. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: usbtmc: fix timeout increaseGergely Imreh1-1/+1
The current 10ms timeout is too short for some normal USBTMC device operation, increase it to a value which was tested with previously affected Tektronix oscilloscopes. Signed-off-by: Gergely Imreh <imrehg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: option: Patch for Huawei Mobile Broadband E270+ ModemRonnie Furuskog1-0/+2
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: option: Toshiba G450 device idPeter Magdina1-0/+2
Signed-off-by: Peter Magdina <peter@magdina.sk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: usblcd, fix memory leakJiri Slaby1-1/+2
Stanse found a memory leak in lcd_probe. Instead of returning without releasing the memory, jump to the error label which frees it. http://stanse.fi.muni.cz/ Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: serial: sierra driver version change to 1.3.8Elina Pasheva1-1/+1
Updated sierra driver version from 1.3.7 to 1.3.8 now that the autosuspend capabilities were added to the driver. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: serial: don't call release without attachAlan Stern1-1/+5
This patch (as1295) fixes a recently-added bug in the USB serial core. If certain kinds of errors occur during probing, the core may call a serial driver's release method without previously calling the attach method. This causes some drivers (io_ti in particular) to perform an invalid memory access. The patch adds a new flag to keep track of whether or not attach has been called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: digi_acceleport: Fix broken unthrottle.Johan Hovold1-4/+4
This patch fixes a regression introduced in 39892da44b21b5362eb848ca424d73a25ccc488f. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: pl2303: fix error characters not being reported to ldiscJohan Hovold1-3/+5
Fix regression introduced by commit d4fc4a7bfc2dee626f4fec1e209e58eaa4312de6 (tty: Fix the PL2303 private methods for sysrq). Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: ftdi_sio: re-implement read processingJohan Hovold1-252/+131
- Re-structure read processing. - Kill obsolete work queue and always push to tty in completion handler. - Use tty_insert_flip_string instead of per character push when possible. - Fix stalled-read regression in 2.6.31 by using urb status to determine when port is closed rather than port count. - Fix race with open/close by checking ASYNCB_INITIALIZED in unthrottle. - Kill private rx_flag and lock and use throttle flags in usb_serial_port instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: ftdi_sio: clean up read completion handlerJohan Hovold1-27/+1
Remove superfluous error checks in completion handler: - No need to check private data and urb pointers as we check urb-status before dereferencing priv (which is not freed until urb has been killed on close). - No need to check tty as it is checked again when processing. - No need to check urb->number_of_packets on bulk urb. Note that both private data and tty are checked again before processing (possibly from work queue which also is cancelled on close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: ftdi_sio: remove unused rx_byte counterJohan Hovold1-13/+0
Remove unused rx_byte counter which is never exposed as noted by Alan Cox. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09USB: ftdi_sio: remove tty->low_latencyJohan Hovold1-4/+0
Fixes tty_flip_buffer_push being called from hard interrupt context with low_latency set. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-09Merge branch 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds1-43/+62
* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Don't allocate smaller sized mappings on every iteration sh: Try PMB mapping based on physical address, not mapping size sh: Plug PMB alloc memory leak sh: Sprinkle __uses_jump_to_uncached sh: enable sleep state LEDs on Ecovec24 usb: r8a66597-udc unaligned fifo fix sh: mach-ecovec24: Document DS2 switch settings. sh: Build fix: export __movmem sh: Disable unaligned kernel access printks by default. sh: mach-ecovec24: modify 1st MTD area to read only sh: mach-ecovec24: Add TouchScreen support sh: magicpanelr2 and dreamcast can use the generic I/O base. sh: Don't enable interrupts in the page fault path sh: Set the default I/O port base to P2SEG. sh: Handle ioport_map() cases for >= P1SEG addresses.
2009-10-06usb: r8a66597-udc unaligned fifo fixMagnus Damm1-43/+62
Rework the r8a66597-udc fifo code to avoid unaligned accesses. Without this patch unaligned exceptions will degrade the USB performance. The exceptions come from the fact that the usb fifo data buffers may be misaligned. This patch updates the fifo access code to only use insl()/outsl() and insw()/outsw() in the case of properly aligned data buffers. The fallback case is that inl()/inw() are used for misaligned buffer reads together with outb() that is used for misaligned buffer writes. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.