aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2014-04-24usb: phy: otg-fsm: export symbol of otg_statemachineLi Jun1-0/+1
This patch exports symbol of otg_statemachine for kernel module can use it. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: core: Add missing module owner fieldAlexander Shiyan1-0/+1
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: add proper delay for waiting correct PHY statusPeter Chen1-13/+13
After the PHY has powered and initialized, it needs some delay for controller to reflect PHY's status. Some status and values for id, vbus, dp/dm are only stable after this delay. The current code tries to clear id/vbus status without enough delay, it causes the status are not cleared properly. This patch add 2ms delay after phy has initialized, and clear the unexpected status after that. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: debug: add debug file for controller registers dumpLi Jun1-0/+51
This patch adds below registers dump for debug: - USBINTR - USBSTS - USBMODE - USBCMD - PORTSC - OTGSC Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: export interrupt enable and status register read functionsLi Jun3-20/+24
This patch moves usb interrupt enable and status register read functions from udc driver to core driver to use them in all ci drivers. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: operate on otgsc register in a general wayLi Jun4-40/+46
Use a more general way to read and write otgsc register. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: coordinate usb phy initialization for different phy typePeter Chen1-3/+34
For internal PHY (like UTMI), the phy clock may from internal pll, it is on/off on the fly, the access PORTSC.PTS will hang without phy clock. So, the usb_phy_init which will open phy clock needs to be called before hw_phymode_configure. See: http://marc.info/?l=linux-arm-kernel&m=139350618732108&w=2 For external PHY (like ulpi), it needs to configure portsc.pts before visit viewport, or the viewport can't be visited. so phy_phymode_configure needs to be called before usb_phy_init. See: cd0b42c2a6d2a74244f0053f8960f5dad5842278 It may not the best solution, but it can work for all situations. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk> Cc: shc_work@mail.ru Cc: denis@eukrea.com Cc: festevam@gmail.com Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: usbmisc: Add USB support for i.MX25/i.MX35 CPUsDenis Carikli1-0/+58
This adds the i.MX25 and the i.MX35 support in the ChipIdea usbmisc driver. The i.MX25 and i.MX35 usb controllers are similar enough to be able to use the same code. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24USB: serial: fix sysfs-attribute removal deadlockJohan Hovold1-1/+3
Fix driver new_id sysfs-attribute removal deadlock by making sure to not hold any locks that the attribute operations grab when removing the attribute. Specifically, usb_serial_deregister holds the table mutex when deregistering the driver, which includes removing the new_id attribute. This can lead to a deadlock as writing to new_id increments the attribute's active count before trying to grab the same mutex in usb_serial_probe. The deadlock can easily be triggered by inserting a sleep in usb_serial_deregister and writing the id of an unbound device to new_id during module unload. As the table mutex (in this case) is used to prevent subdriver unload during probe, it should be sufficient to only hold the lock while manipulating the usb-serial driver list during deregister. A racing probe will then either fail to find a matching subdriver or fail to get the corresponding module reference. Since v3.15-rc1 this also triggers the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc2 #123 Tainted: G W ------------------------------------------------------- modprobe/190 is trying to acquire lock: (s_active#4){++++.+}, at: [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 but task is already holding lock: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (table_lock){+.+.+.}: [<c0075f84>] __lock_acquire+0x1694/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c03af3cc>] _raw_spin_lock+0x4c/0x5c [<c02bbc24>] usb_store_new_id+0x14c/0x1ac [<bf007eb4>] new_id_store+0x68/0x70 [usbserial] [<c025f568>] drv_attr_store+0x30/0x3c [<c01690e0>] sysfs_kf_write+0x5c/0x60 [<c01682c0>] kernfs_fop_write+0xd4/0x194 [<c010881c>] vfs_write+0xbc/0x198 [<c0108e4c>] SyS_write+0x4c/0xa0 [<c000f880>] ret_fast_syscall+0x0/0x48 -> #0 (s_active#4){++++.+}: [<c03a7a28>] print_circular_bug+0x68/0x2f8 [<c0076218>] __lock_acquire+0x1928/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c0166b70>] __kernfs_remove+0x254/0x310 [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 [<c0169fb8>] remove_files.isra.1+0x48/0x84 [<c016a2fc>] sysfs_remove_group+0x58/0xac [<c016a414>] sysfs_remove_groups+0x34/0x44 [<c02623b8>] driver_remove_groups+0x1c/0x20 [<c0260e9c>] bus_remove_driver+0x3c/0xe4 [<c026235c>] driver_unregister+0x38/0x58 [<bf007fb4>] usb_serial_bus_deregister+0x84/0x88 [usbserial] [<bf004db4>] usb_serial_deregister+0x6c/0x78 [usbserial] [<bf005330>] usb_serial_deregister_drivers+0x2c/0x4c [usbserial] [<bf016618>] usb_serial_module_exit+0x14/0x1c [sierra] [<c009d6cc>] SyS_delete_module+0x184/0x210 [<c000f880>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(table_lock); lock(s_active#4); lock(table_lock); lock(s_active#4); *** DEADLOCK *** 1 lock held by modprobe/190: #0: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] stack backtrace: CPU: 0 PID: 190 Comm: modprobe Tainted: G W 3.15.0-rc2 #123 [<c0015e10>] (unwind_backtrace) from [<c0013728>] (show_stack+0x20/0x24) [<c0013728>] (show_stack) from [<c03a9a54>] (dump_stack+0x24/0x28) [<c03a9a54>] (dump_stack) from [<c03a7cac>] (print_circular_bug+0x2ec/0x2f8) [<c03a7cac>] (print_circular_bug) from [<c0076218>] (__lock_acquire+0x1928/0x1ce4) [<c0076218>] (__lock_acquire) from [<c0076de8>] (lock_acquire+0xb4/0x154) [<c0076de8>] (lock_acquire) from [<c0166b70>] (__kernfs_remove+0x254/0x310) [<c0166b70>] (__kernfs_remove) from [<c0167aa0>] (kernfs_remove_by_name_ns+0x4c/0x94) [<c0167aa0>] (kernfs_remove_by_name_ns) from [<c0169fb8>] (remove_files.isra.1+0x48/0x84) [<c0169fb8>] (remove_files.isra.1) from [<c016a2fc>] (sysfs_remove_group+0x58/0xac) [<c016a2fc>] (sysfs_remove_group) from [<c016a414>] (sysfs_remove_groups+0x34/0x44) [<c016a414>] (sysfs_remove_groups) from [<c02623b8>] (driver_remove_groups+0x1c/0x20) [<c02623b8>] (driver_remove_groups) from [<c0260e9c>] (bus_remove_driver+0x3c/0xe4) [<c0260e9c>] (bus_remove_driver) from [<c026235c>] (driver_unregister+0x38/0x58) [<c026235c>] (driver_unregister) from [<bf007fb4>] (usb_serial_bus_deregister+0x84/0x88 [usbserial]) [<bf007fb4>] (usb_serial_bus_deregister [usbserial]) from [<bf004db4>] (usb_serial_deregister+0x6c/0x78 [usbserial]) [<bf004db4>] (usb_serial_deregister [usbserial]) from [<bf005330>] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial]) [<bf005330>] (usb_serial_deregister_drivers [usbserial]) from [<bf016618>] (usb_serial_module_exit+0x14/0x1c [sierra]) [<bf016618>] (usb_serial_module_exit [sierra]) from [<c009d6cc>] (SyS_delete_module+0x184/0x210) [<c009d6cc>] (SyS_delete_module) from [<c000f880>] (ret_fast_syscall+0x0/0x48) Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: wusbcore: fix panic in wusbhc_chid_setThomas Pugliese1-1/+1
If no valid CHID value has previously been set on an HWA, writing a value of all zeros will cause a kernel panic in uwb_radio_stop because wusbhc->uwb_rc has not been set. This patch skips the call to uwb_radio_stop if wusbhc->uwb_rc has not been initialized. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irqThomas Pugliese1-2/+2
Nesting a spin_lock_irq/unlock_irq inside a lock that has already disabled interrupts will enable interrupts before we are ready when spin_unlock_irq is called. This patch converts the inner lock to use spin_lock and spin_unlock instead. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24usb: chipidea: coordinate usb phy initialization for different phy typePeter Chen1-3/+34
For internal PHY (like UTMI), the phy clock may from internal pll, it is on/off on the fly, the access PORTSC.PTS will hang without phy clock. So, the usb_phy_init which will open phy clock needs to be called before hw_phymode_configure. See: http://marc.info/?l=linux-arm-kernel&m=139350618732108&w=2 For external PHY (like ulpi), it needs to configure portsc.pts before visit viewport, or the viewport can't be visited. so phy_phymode_configure needs to be called before usb_phy_init. See: cd0b42c2a6d2a74244f0053f8960f5dad5842278 It may not the best solution, but it can work for all situations. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Chris Ruehl <chris.ruehl@gtsys.com.hk> Cc: shc_work@mail.ru Cc: denis@eukrea.com Cc: festevam@gmail.com Cc: stable <stable@vger.kernel.org> # 3.14 Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24Merge tag 'fixes-for-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linusGreg Kroah-Hartman13-81/+78
Felipe writes: usb: fixes for v3.15-rc3 Quite a few fixes this time since I lost v3.15-rc2 window. Most fixes are MUSB which learned to remove its debugfs directories properly, got a fix for PHY handling and now knows that it should make sure its clocks aren't gated before trying to access registers. ffs got a race fix between ffs_epfile_io() and ffs_func_eps_disable(). dwc3 got a fix for system suspend/resume and now only iterates over valid endpoints when trying to resize TX fifos. usb_get_phy() now will properly return an error if try_module_get() fails. We also have a revert for a NAPI conversion on the ethernet gadget which was causing a kernel BUG. Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-04-24usb: phy: fsm: change "|" to "||" for condition OTG_STATE_A_WAIT_BCON at statemachinePeter Chen1-1/+1
We should be using logical "or" not bitwise "or". Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-24usb: phy: fsm: update OTG HNP state transitionLi Jun1-3/+4
According to:"On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification July 27, 2012 Revision 2.0 version 1.1a" - add a_wait_vrise to a_wait_vfall - update condition from a_wait_vrise to a_wait_bcon Signed-off-by: Li Jun <b47624@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: dwc3: exynos: Make provision for vdd regulatorsVivek Gautam1-2/+49
Facilitate getting required 3.3V and 1.0V VDD supply for DWC3 controller on Exynos. With patches for regulators' nodes merged in 3.15: c8c253f ARM: dts: Add regulator entries to smdk5420 275dcd2 ARM: dts: add max77686 pmic node for smdk5250, certain perripherals will now need to ensure that, they request VDD regulators in their drivers, and enable them so as to make them working. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: musb: dsps: compile suspend/resume only with PM_SLEEPWolfram Sang1-1/+1
Depending on PM is not enough, because only PM_RUNTIME could be selected. Fixes: drivers/usb/musb/musb_dsps.c:703:12: warning: 'dsps_suspend' defined but not used [-Wunused-function] drivers/usb/musb/musb_dsps.c:721:12: warning: 'dsps_resume' defined but not used [-Wunused-function] Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: f_subset: replace PTR_RET with PTR_ERR_OR_ZERODuan Jiong1-1/+1
PTR_RET is deprecated. Do not recommend its usage anymore. Use PTR_ERR_OR_ZERO instead. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: dwc3: add glue layer dependenciesJean Delvare1-1/+3
Glue layers for the DWC3 driver only make sense on specific platforms. Add dependencies so that they are not built where they aren't needed. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: musb: dsps: handle babble interruptsDaniel Mack1-1/+24
When the dsps isr sees a babble error, pass it down to the core for fixup. Also, provide a .reset hook so the core can call us back. A babble interrupt error occured when a USB mass storage device ("CHIPSBNK v3.3.9.1", 1e3d:2093) was disconnected from a AM33xx host. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Thomas Mellenthin <mellenthin@teufel.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: musb: add a work_struct to recover from babble errorsDaniel Mack2-0/+36
Handle BABBLE interrupt error conditions from a work struct handler. This indirection is necessary as we can't be certain that the phy functions don't sleep. Platform layer implementation may pass a babble error down to the core in order to handle it. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: musb: add reset hook to platform opsDaniel Mack1-0/+7
Babble interrupts require us to reset the DSPS glue layer. In order to handle all other recovery tasks independently, add a new hook for platform-specific implementations of the actual reset. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: gr_udc: Use GFP_ATOMIC when allocating under held spinlockAndreas Larsson1-2/+2
As gr_ep_init must be called with dev->lock held, GFP_KERNEL must not be used. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: gr_udc: Return error code when trying to set ep.maxpacket > ep.maxpacket_limitAndreas Larsson1-0/+4
Make gr_ep_enable fail properly when a call requests a larger ep.maxpacket than ep.maxpacket_limit. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: gr_udc: Add ep.maxpacket_limit to debugfs informationAndreas Larsson1-0/+1
Add information on ep.maxpacket_limit for each endpoint in the debugfs information. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: gr_udc: Use of_property_read_u32_index to access arraysAndreas Larsson1-8/+4
Use an appropriate accessor function for property arrays to make the code nicer and make the code correct if it would ever run on little endian architectures. Suggested by Mark Rutland. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: gr_udc: Use platform_get_irq instead of irq_of_parse_and_mapAndreas Larsson1-6/+8
Use platform_get_irq as no mapping needs to be done. No functional difference for SPARC which is the typical environment for the driver though. Suggested by Mark Rutland. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: gr_udc: improve platform_device variable nameAndreas Larsson1-9/+9
Rename struct platform_device pointers from ofdev to pdev for clarity, while at that, also use platform_set/get_drvdata() helpers. Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: phy: generic: allow multiples calls to usb_phy_generic_register()Felipe Balbi5-23/+35
it's now very easy to return a platform_device pointer and have the caller pass it as argument when calling usb_phy_generic_unregister(). Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: musb: move usb_phy_generic_{un,}register calls to probe()/remove()Felipe Balbi5-12/+11
This patch is in preparation to supporting calling those functions multiple times. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>Felipe Balbi12-12/+12
now that all functions match the driver name, the only missing piece is to rename the header file itself. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: phy: rename usb_nop_xceiv to usb_phy_genericFelipe Balbi11-48/+48
no functional changes, just renaming the function in order to make it slightly clearer what it should be used for, also matching the driver name. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: only GPL drivers in the gadget and phy frameworkFelipe Balbi8-64/+64
We only support GPL drivers in the USB Gadget Framework, it sounds correct to make all exported symbols GPL too. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: dwc3: core: refactor mode initialization to its own functionFelipe Balbi1-66/+67
Move mode (Host, Peripheral, OTG) initialization to its own function in order to decrease the size of our probe() routine. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: phy: mv-u3d: switch over to writel/readlFelipe Balbi1-10/+10
by removing the _relaxed suffix, we can build this driver in other architectures. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: phy: am335x-control: wait 1ms after power-up transitionsDaniel Mack1-0/+9
Tests have shown that when a power-up transition is followed by other PHY operations too quickly, the USB port appears dead. Waiting 1ms fixes this problem. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: stable@vger.kernel.org [3.14] Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21usb: gadget: f_rndis: reduce NETTX irq caused by free skb headerMacpaul Lin1-1/+1
This patch reduce unecessary NETTX softirq call caused by free skb header. You will see this softirq comes twice while there is only one TX packet to be transmitted. So using dev_kfree_skb() instead of dev_kfree_skb_any() to avoid this problem. Cc: David S. Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Macpaul Lin <macpaul@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-21Revert "usb: gadget: u_ether: move hardware transmit to RX NAPI"Felipe Balbi1-66/+35
This reverts commit 716fb91dfe1777bd6d5e598f3d3572214b3ed296. That commit caused a regression which would end up in a kernel BUG() as below: [ 101.554300] g_ether gadget: full-speed config #1: CDC Subset/SAFE [ 101.585186] ------------[ cut here ]------------ [ 101.600587] kernel BUG at include/linux/netdevice.h:495! [ 101.615850] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM [ 101.645539] Modules linked in: [ 101.660483] CPU: 0 PID: 0 Comm: swapper Not tainted 3.15.0-rc1+ #104 [ 101.690175] task: c05dc5c8 ti: c05d2000 task.ti: c05d2000 [ 101.705579] PC is at eth_start+0x64/0x8c [ 101.720981] LR is at __netif_schedule+0x7c/0x90 [ 101.736455] pc : [<c0299174>] lr : [<c036a134>] psr: 60000093 [ 101.736455] sp : c05d3d18 ip : c05d3cf8 fp : c05d3d2c [ 101.782340] r10: 00000000 r9 : c196c1f0 r8 : c196c1a0 [ 101.797823] r7 : 00000000 r6 : 00000002 r5 : c1976400 r4 : c1976400 [ 101.828058] r3 : 00000000 r2 : c05d3ce8 r1 : 00000001 r0 : 00000002 [ 101.858722] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Reported-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra2-3/+3
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17usb: gadget: fsl driver pullup fixSuresh Gupta1-0/+4
This fix the fsl usb gadget driver in a way that the usb device will be only "pulled up" on requests only when vbus is powered Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-04-16uas: fix deadlocky memory allocationsOliver Neukum1-2/+2
There are also two allocations with GFP_KERNEL in the pre-/post_reset code paths. That is no good because that is a part of the SCSI error handler. Signed-off-by: Oliver Neukum <oliver@neukum.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16uas: fix error handling during scsi_scan()Oliver Neukum1-1/+2
intfdata is set only after scsi_scan(). uas_pre_reset() however needs intfdata to be valid and will follow the NULL pointer killing khubd. intfdata must be preemptively set before the host is registered and undone in the error case. Signed-off-by: Oliver Neukum <oliver@neukum.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16uas: fix GFP_NOIO under spinlockOliver Neukum1-3/+3
Quote Dan: The patch e36e64930cff: "uas: Use GFP_NOIO rather then GFP_ATOMIC where possible" from Nov 7, 2013, leads to the following static checker warning: drivers/usb/storage/uas.c:806 uas_eh_task_mgmt() error: scheduling with locks held: 'spin_lock:lock' Some other allocations under spinlock are not caught. The fix essentially reverts e36e64930cffd94e1c37fdb82f35989384aa946b Signed-off-by: Oliver Neukum <oliver@neukum.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: cdc-acm: Remove Motorola/Telit H24 serial interfaces from ACM driverMichael Ulbricht1-7/+21
By specifying NO_UNION_NORMAL the ACM driver does only use the first two USB interfaces (modem data & control). The AT Port, Diagnostic and NMEA interfaces are left to the USB serial driver. Signed-off-by: Michael Ulbricht <michael.ulbricht@systec-electronic.com> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: ohci-jz4740: FEAT_POWER is a port feature, not a hub featureLaurent Pinchart1-2/+2
Power control of hub ports target the CLEAR_FEATURE and SET_FEATURE requests to ports, not to the hub. Fix the hub control function to detect the request correctly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: ohci-jz4740: Fix uninitialized variable warningLaurent Pinchart1-1/+1
The ret variable is not initialized in all code paths of the ohci_jz4740_hub_control function. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: EHCI: tegra: set txfill_tuningStephen Warren1-0/+23
To avoid memory fetch underflows with larger USB transfers, Tegra SoCs need txfill_tuning's txfifothresh register field set to a non-default value. Add a custom reset override in order to set this up. These values are recommended practice for all Tegra chips. However, I've only noticed practical problems when not setting them this way on systems using Tegra124. Hence, CC: stable only for recent kernels which actually support Tegra124. Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16usb: ehci-platform: Return immediately from suspend if ehci_suspend failsVivek Gautam1-0/+2
Patch 'b8efdaf USB: EHCI: add check for wakeup/suspend race' adds a check for possible race between suspend and wakeup interrupt, and thereby it returns -EBUSY as error code if there's a wakeup interrupt. So the platform host controller should not proceed further with its suspend callback, rather should return immediately to avoid powering down the essential things, like phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16usb: ehci-exynos: Return immediately from suspend if ehci_suspend failsVivek Gautam1-0/+2
Patch 'b8efdaf USB: EHCI: add check for wakeup/suspend race' adds a check for possible race between suspend and wakeup interrupt, and thereby it returns -EBUSY as error code if there's a wakeup interrupt. So the platform host controller should not proceed further with its suspend callback, rather should return immediately to avoid powering down the essential things, like phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16USB: fix crash during hotplug of PCI USB controller cardAlan Stern1-1/+1
The code in hcd-pci.c that matches up EHCI controllers with their companion UHCI or OHCI controllers assumes that the private drvdata fields don't get set too early. However, it turns out that this field gets set by usb_create_hcd(), before hcd-pci expects it, and this can result in a crash when two controllers are probed in parallel (as can happen when a new controller card is hotplugged). The companions_rwsem lock was supposed to prevent this sort of thing, but usb_create_hcd() is called outside the scope of the rwsem. A simple solution is to check that the root-hub pointer has been initialized as well as the drvdata field. This doesn't happen until usb_add_hcd() is called; that call and the check are both protected by the rwsem. This patch should be applied to stable kernels from 3.10 onward. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Stefani Seibold <stefani@seibold.net> Tested-by: Stefani Seibold <stefani@seibold.net> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.