aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2013-10-11Merge tag 'keystone-soc-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/socKevin Hilman28-120/+230
From Santosh Shilimkar: SOC updates for Keystone II devices: - Clock tree support - Clock management support using PM core - Keystone config update for EMDA with ack from Vinod - Enable SPI and I2C drivers * tag 'keystone-soc-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: (510 commits) ARM: keystone: Enable I2C and SPI bus support ARM: keystone: Select TI_EDMA to be able to enable SPI driver dma: Allow TI_EDMA selectable for ARCH_KEYSTONE ARM: dts: keystone: Add the SPI nodes ARM: dts: keystone: Add i2c device nodes ARM: keystone: add PM domain support for clock management ARM: keystone: Enable clock drivers ARM: dts: keystone: Add clock phandle to UART nodes ARM: dts: keystone: Add clock tree data to devicetree +Linux 3.12-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-11usb: phy: don't return with NULL from devm_usb_get_phy()Gabor Juhos1-1/+1
The callers are expecting an ERR_PTR value in case of an error. Change he code to return with an encoded -ENOMEM value in the case of a failed devres_alloc call. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: gadget: Make VERBOSE_DEBUG enableable via KconfigAndreas Larsson2-1/+16
Create a way for VERBOSE_DEBUG to be enabled during drivers/usb/gadget/ build. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: musb: start musb on the udc side, tooSebastian Andrzej Siewior4-46/+49
I have am335x-evm with one port running in OTG mode. Since commit fe4cb09 ("usb: musb: gadget: remove hcd initialization") the loaded gadget does non pop up on the host. All I see is |usb 4-5: new high-speed USB device number 52 using ehci-pci |usb 4-5: device descriptor read/64, error -110 Since a later commit 2cc65fe ("usb: musb: add musb_host_setup() and musb_host_cleanup()) the gadget shows up on the host again but only in OTG mode (because we have the host init code running). It does not work in device only mode. If running in OTG mode and the gadget is removed and added back (rmmod followed by modprobe of a gadget) then the same error is pops up on the host side. This patch ensures that the gadget side also executes musb_start() which puts the chip in "connect accept" mode. With this change the device works in OTG & device mode and the gadget can be added & removed multiple times. A device (if musb is in OTG mode acting as a host) is only recognized if it is attached during module load (musb_hdrc module). After the device unplugged and plugged again the host does not recognize it. We get a buch of errors if musb running in OTG mode, attached to a host and no gadget is loaded. Bah. This is one step forward. Host & device only mode should work. I will look at OTG later. I looked at this before commit fe4cb09 and OTG wasn't working there perfectly so I am not sure that it is a regression :) Cc: <stable@vger.kernel.org> # v3.11 Cc: Daniel Mack <zonque@gmail.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: gadget: s3c-hsotg: remove unused labelRobert Baldyga1-1/+0
This patch removes unused label. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: gadget: s3c-hsotg: add multi count supportRobert Baldyga1-6/+28
This patch adds Multi Count support. It adds few modifications: - Fix s3c_hsotg_set_ep_maxpacket() function. Field wMaxPacketSize of endpoint descriptor is now splitted into maximum packet size value and number of additional transaction per microframe. - Modify s3c_hsotg_write_fifo() function. It actually calculates transfer size, taking into account Multi Count value, which indicates number of transactions per microframe. - Fix s3c_hsotg_start_req() function by setting number of packets to Multi Count field in DIEPTSIZ register for isochronous endpoints. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: gadget: s3c-hsotg: add isochronous transfers supportRobert Baldyga1-4/+23
This patch adds isochronous transfer support. It adds few modifications: - Modify s3c_hsotg_epint() function. Some interrupts are ignored for isochronous endpoints, (e.g. INTknTXFEmpMsk) becouse isochronous request is always transfered in single transaction, which ends with XferCompl interrupt. - Add Odd/Even microframe toggle to allow data transfering in each microframe in s3c_hsotg_epint() function. - Fix s3c_hsotg_ep_enable() function by supporting isochronous endpoint type. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-11usb: dwc3: core: use pm_runtime_put_sync() on removeFelipe Balbi1-1/+1
We are going to disable runtime_pm and we're removing the driver, we must disable the device now. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: phy: Add RCAR Gen2 USB phyValentine Barshak3-0/+262
This adds RCAR Gen2 USB phy support. The driver configures USB channels 0/2 which are shared between PCI USB hosts and USBHS/USBSS devices. It also controls internal USBHS phy. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: musb: cancel work on removalSebastian Andrzej Siewior1-0/+1
So I captured this: |WARNING: CPU: 0 PID: 2078 at /home/bigeasy/work/new/TI/linux/lib/debugobjects.c:260 debug_print_object+0x94/0xc4() |ODEBUG: free active (active state 0) object type: work_struct hint: musb_irq_work+0x0/0x38 [musb_hdrc] |CPU: 0 PID: 2078 Comm: rmmod Not tainted 3.12.0-rc4+ #338 |[<c0014d38>] (unwind_backtrace+0x0/0xf4) from [<c001249c>] (show_stack+0x14/0x1c) |[<c001249c>] (show_stack+0x14/0x1c) from [<c0037720>] (warn_slowpath_common+0x64/0x84) |[<c0037720>] (warn_slowpath_common+0x64/0x84) from [<c00377d4>] (warn_slowpath_fmt+0x30/0x40) |[<c00377d4>] (warn_slowpath_fmt+0x30/0x40) from [<c022ae90>] (debug_print_object+0x94/0xc4) |[<c022ae90>] (debug_print_object+0x94/0xc4) from [<c022b7e0>] (debug_check_no_obj_freed+0x1c0/0x228) |[<c022b7e0>] (debug_check_no_obj_freed+0x1c0/0x228) from [<c00f1f38>] (kfree+0xf8/0x228) |[<c00f1f38>] (kfree+0xf8/0x228) from [<c02921c4>] (release_nodes+0x1a8/0x248) |[<c02921c4>] (release_nodes+0x1a8/0x248) from [<c028f70c>] (__device_release_driver+0x98/0xf0) |[<c028f70c>] (__device_release_driver+0x98/0xf0) from [<c028f840>] (device_release_driver+0x24/0x34) |[<c028f840>] (device_release_driver+0x24/0x34) from [<c028ebe8>] (bus_remove_device+0x148/0x15c) |[<c028ebe8>] (bus_remove_device+0x148/0x15c) from [<c028d120>] (device_del+0x104/0x1c0) |[<c028d120>] (device_del+0x104/0x1c0) from [<c02911e4>] (platform_device_del+0x18/0xac) |[<c02911e4>] (platform_device_del+0x18/0xac) from [<c029179c>] (platform_device_unregister+0xc/0x18) |[<c029179c>] (platform_device_unregister+0xc/0x18) from [<bf1902fc>] (dsps_remove+0x20/0x4c [musb_dsps]) |[<bf1902fc>] (dsps_remove+0x20/0x4c [musb_dsps]) from [<c0290d7c>] (platform_drv_remove+0x1c/0x24) |[<c0290d7c>] (platform_drv_remove+0x1c/0x24) from [<c028f704>] (__device_release_driver+0x90/0xf0) |[<c028f704>] (__device_release_driver+0x90/0xf0) from [<c028f818>] (driver_detach+0xb4/0xb8) |[<c028f818>] (driver_detach+0xb4/0xb8) from [<c028e6e8>] (bus_remove_driver+0x98/0xec) |[<c028e6e8>] (bus_remove_driver+0x98/0xec) from [<c008fc70>] (SyS_delete_module+0x1e0/0x24c) |[<c008fc70>] (SyS_delete_module+0x1e0/0x24c) from [<c000e680>] (ret_fast_syscall+0x0/0x48) |---[ end trace d79045419a3e51ec ]--- The workqueue is only scheduled from the ep0 and never canceled in case the musb is removed before the work has a chance to run. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: mass_storage: merge usb_f_mass_storage module with u_ms moduleAndrzej Pietrasiewicz2-10/+1
u_ms.ko is needed only together with usb_f_mass_storage.ko. Merge them. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: remove compatibility layerAndrzej Pietrasiewicz2-152/+19
There are no more old interface users left. Remove it. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: multi: convert to new interface of f_mass_storageAndrzej Pietrasiewicz2-30/+83
Convert the legacy multi gadget to the new interface of f_mass_storage, so that later the compatibility layer in f_mass_storage can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: multi: convert to new interface of f_rndisAndrzej Pietrasiewicz2-24/+52
Convert the legacy multi gadget to the new interface of f_rndis, so that later the compatibility layer in f_rndis can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: multi: convert to new interface of f_ecmAndrzej Pietrasiewicz2-8/+61
Convert the legacy multi gadget to the new interface of f_ecm, so that later the compatibility layer in f_ecm can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: acm_ms: convert to new interface of f_mass_storageAndrzej Pietrasiewicz2-39/+75
Convert the legacy acm_ms gadget to use the new function interface of f_mass_storage, so that later the compatibility layer in f_mass_storage can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: add configfs supportAndrzej Pietrasiewicz3-0/+388
From this commit on f_mass_storage is available through configfs. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: storage_common: add methods to show/store 'cdrom' and 'removable'Andrzej Pietrasiewicz2-0/+47
This will be required by configfs integration. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: storage_common: make attribute operations more genericAndrzej Pietrasiewicz3-41/+38
Show/store methods for sysfs attributes contain code which can be used also by configfs. Make them abstract the source the lun and rw_semaphore are taken from. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: mass_storage: convert to new interface of f_mass_storageAndrzej Pietrasiewicz4-27/+91
Convert old mass_storage gadget to use the new interface of f_mass_storage so that later the compatibility layer in f_mass_storage can be removed. struct fsg_common is not known to mass_storage.c, so a setter method is added to f_mass_storage. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: convert to new function interface with backward compatibilityAndrzej Pietrasiewicz7-22/+179
Converting mass storage to the new function interface requires converting the USB mass storage's function code and its users. This patch converts the f_mass_storage.c to the new function interface. The file is now compiled into a separate usb_f_mass_storage.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: create fsg_common_run_thread for use in fsg_common_initAndrzej Pietrasiewicz2-11/+23
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: create fsg_common_set_inquiry_string for use in fsg_common_initAndrzej Pietrasiewicz2-10/+22
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: create lun creation helpers for use in fsg_common_initAndrzej Pietrasiewicz2-91/+153
fsg_common_init is a lengthy function. Factor portions of it out. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: create fsg_common_set_cdev for use in fsg_common_initAndrzej Pietrasiewicz2-21/+32
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: create lun handling helpers for use in fsg_common_initAndrzej Pietrasiewicz2-17/+71
fsg_common_init is a lengthy function. Factor portions of it out. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: create fsg_common_set_num_buffers for use in fsg_common_initAndrzej Pietrasiewicz2-26/+48
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: create fsg_common_setup for use in fsg_common_initAndrzej Pietrasiewicz1-16/+24
fsg_common_init is a lengthy function. Factor a portion of it out. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: make sysfs interface optionalAndrzej Pietrasiewicz3-14/+59
When configfs is in place, the luns will not be represented in sysfs, so there will be no struct device associated with a lun. In order to maintain compatibility and allow configfs adoption sysfs is made optional in this patch. As a consequence some debug macros need to be adjusted. Two new fields are added to struct fsg_lun: name and name_pfx. The "name" is for storing a string which is presented to the user instead of the dev_name. The "name_pfx", if non-NULL, is prepended to the "name" at printing time. The name_pfx is for a future lun.0, which will be a default group in mass_storage.<name>. By design at USB function configfs group's creation time its name is not known (but instead set a bit later in drivers/usb/gadget/configfs.c:function_make) and it is this name that serves the purpose of the said name prefix. So instead of copying a yet-unknown string a pointer to it is stored in struct fsg_lun. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: f_mass_storage: create _fsg_common_free_buffersAndrzej Pietrasiewicz1-9/+13
When configfs is in place, gadgets will have to be able to free fsg buffers. Add a helper function. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: s3c-hsotg: fix set_ep_maxpacket functionRobert Baldyga1-6/+5
This patch fixes max packet size check in s3c_hsotg_set_ep_maxpacket() function. According USB specification, bits 10..0 of mps specifies maximum packet size, so there is bitwise AND between mps and 0x7ff value. Also added check if maxpacket isn't grater than 1024 which is maximum size od single USB transaction. In s3c_hsotg_ep_enable() function added s3c_hsotg_set_ep_maxpacket() call instead of setting ep.maxpacket value directly. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: gadget: mv_u3d_core: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-10usb: g_ffs: fix compilation warningDavid Cohen1-0/+2
If USB_FUNCTIONFS is selected without USB_FUNCTIONFS_ETH and USB_FUNCTIONFS_RNIS, u_ether.h won't be included and then USB_ETHERNET_MODULE_PARAMAETERS macro won't be available causing the following warning compilation: drivers/usb/gadget/g_ffs.c:81:1: warning: data definition has no type or storage class [enabled by default] drivers/usb/gadget/g_ffs.c:81:1: warning: type defaults to ‘int’ in declaration of ‘USB_ETHERNET_MODULE_PARAMETERS’ [-Wimplicit-int] drivers/usb/gadget/g_ffs.c:81:1: warning: function declaration isn’t a prototype [-Wstrict-prototypes] This patch fixes the warning by making USB_ETHERNET_MODULE_PARAMETERS to be used iff u_ether.h is included, otherwise it is not needed. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-09drivers: clean-up prom.h implicit includesRob Herring4-0/+7
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-10-09xhci: Fix spurious wakeups after S5 on HaswellTakashi Iwai3-0/+25
Haswell LynxPoint and LynxPoint-LP with the recent Intel BIOS show mysterious wakeups after shutdown occasionally. After discussing with BIOS engineers, they explained that the new BIOS expects that the wakeup sources are cleared and set to D3 for all wakeup devices when the system is going to sleep or power off, but the current xhci driver doesn't do this properly (partly intentionally). This patch introduces a new quirk, XHCI_SPURIOUS_WAKEUP, for fixing the spurious wakeups at S5 by calling xhci_reset() in the xhci shutdown ops as done in xhci_stop(), and setting the device to PCI D3 at shutdown and remove ops. The PCI D3 call is based on the initial fix patch by Oliver Neukum. [Note: Sarah changed the quirk name from XHCI_HSW_SPURIOUS_WAKEUP to XHCI_SPURIOUS_WAKEUP, since none of the other quirks have system names in them. Sarah also fixed a collision with a quirk submitted around the same time, by changing the xhci->quirks bit from 17 to 18.] This patch should be backported to kernels as old as 3.0, that contain the commit 1c12443ab8eba71a658fae4572147e56d1f84f66 "xhci: Add Lynx Point to list of Intel switchable hosts." Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2013-10-09xhci: fix write to USB3_PSSEN and XUSB2PRM pci config registersXenia Ragiadakou1-2/+2
The function pci_write_config_dword() sets the appropriate byteordering internally so the value argument should not be converted to little-endian. This bug was found by sparse. This patch is not suitable for stable. Since cpu_to_lei32 is a no-op on little endian systems, this bug would only affect big endian Intel systems with the EHCI to xHCI port switchover, which are non-existent, AFAIK. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09xhci: quirk for extra long delay for S4Oliver Neukum3-1/+15
It has been reported that this chipset really cannot sleep without this extraordinary delay. This patch should be backported, in order to ensure this host functions under stable kernels. The last quirk for Fresco Logic hosts (commit bba18e33f25072ebf70fd8f7f0cdbf8cdb59a746 "xhci: Extend Fresco Logic MSI quirk.") was backported to stable kernels as old as 2.6.36. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2013-10-09xhci: Don't enable/disable RWE on bus suspend/resume.Sarah Sharp1-26/+0
The RWE bit of the USB 2.0 PORTPMSC register is supposed to enable remote wakeup for devices in the lower power link state L1. It has nothing to do with the device suspend remote wakeup from L2. The RWE bit is designed to be set once (when USB 2.0 LPM is enabled for the port) and cleared only when USB 2.0 LPM is disabled for the port. The xHCI bus suspend method was setting the RWE bit erroneously, and the bus resume method was clearing it. The xHCI 1.0 specification with errata up to Aug 12, 2012 says in section 4.23.5.1.1.1 "Hardware Controlled LPM": "While Hardware USB2 LPM is enabled, software shall not modify the HIRDBESL or RWE fields of the USB2 PORTPMSC register..." If we have previously enabled USB 2.0 LPM for a device, that means when the USB 2.0 bus is resumed, we violate the xHCI specification by clearing RWE. It also means that after a bus resume, the host would think remote wakeup is disabled from L1 for ports with USB 2.0 Link PM enabled, which is not what we want. This patch should be backported to kernels as old as 3.2, that contain the commit 65580b4321eb36f16ae8b5987bfa1bb948fc5112 "xHCI: set USB2 hardware LPM". That was the first kernel that supported USB 2.0 Link PM. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2013-10-07USB: cyberjack: fix buggy integer overflow testDan Carpenter1-1/+1
"old_rdtodo" and "size" are short type. They are type promoted to int and the condition is never true. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07USB/host: Bugfix: Return length of copied buffer in uhci_hub_control()Deng-Cheng Zhu1-20/+20
In addition to the error statuses -ETIMEDOUT and -EPIPE, uhci_hub_control() needs to return the length of copied buffer when appropriate, so that the returned status of ->hub_control() in rh_call_control() in the USB core HCD can be properly handled. This patch also removes the OK() macro to make the code more readable. Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07usb: gadget: mv_u3d_core: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07usb: wusbcore: fix string formatting warnings on 64-bit buildsThomas Pugliese1-2/+2
This patch fixes compile warnings on 64-bit builds that were introduced by the recent isoc changes. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07usb: host: uhci-platform: remove deprecated IRQF_DISABLEDMichael Opdenacker1-2/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-06Merge 3.12-rc4 into usb-nextGreg Kroah-Hartman8-13/+29
We want the USB fixes in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05drivers: usb: core: hcd: if-else-braces fixedMatthias Beyer1-2/+2
Put else keyword on same line as closing brace from if statement, added { } braces as the styleguide says. Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05drivers: usb: core: hcd: removed braces for return statementsMatthias Beyer1-4/+4
Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05drivers: usb: core: hcd: replaced C99 // commentsMatthias Beyer1-5/+5
Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05drivers: usb: core: hcd: Whitespace fixesMatthias Beyer1-28/+28
including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05drivers: usb: core: hcd: moved asterix to variableMatthias Beyer1-1/+1
instead of type Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05USB/host: Use existing macros instead of hard-coded values in uhci-debug.cDeng-Cheng Zhu1-8/+8
Now that UHCI IO registers have been defined in uhci-hcd.h, use them. Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.