aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/uwb (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-03-24IB/rxe: double free on errorDan Carpenter1-1/+1
"goto err;" has it's own kfree_skb() call so it's a double free. We only need to free on the "goto exit;" path. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-24RDMA/vmw_pvrdma: Activate device on ethernet link upAditya Sarwade2-3/+12
Restore device state when ethernet link changes to active. Acked-by: George Zhang <georgezhang@vmware.com> Acked-by: Jorgen Hansen <jhansen@vmware.com> Acked-by: Bryan Tan <bryantan@vmware.com> Signed-off-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-24RDMA/vmw_pvrdma: Dont hardcode QP header pageAdit Ranadive2-4/+6
Moved the header page count to a macro. Reported-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Aditya Sarwade <asarwade@vmware.com> Tested-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-24RDMA/vmw_pvrdma: Cleanup unused variablesAdit Ranadive3-22/+17
Removed the unused nreq and redundant index variables. Moved hardcoded async and cq ring pages number to macro. Reported-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Aditya Sarwade <asarwade@vmware.com> Tested-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-24infiniband: Fix alignment of mmap cookies to support VIPT cachingJason Gunthorpe2-4/+4
When vmalloc_user is used to create memory that is supposed to be mmap'd to user space, it is necessary for the mmap cookie (eg the offset) to be aligned to SHMLBA. This creates a situation where all virtual mappings of the same physical page share the same virtual cache index and guarantees VIPT coherence. Otherwise the cache is non-coherent and the kernel will not see writes by userspace when reading the shared page (or vice-versa). Reported-by: Josh Beavers <josh.beavers@gmail.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-24IB/core: Protect against self-requeue of a cq work itemSagi Grimberg1-1/+1
We need to make sure that the cq work item does not run when we are destroying the cq. Unlike flush_work, cancel_work_sync protects against self-requeue of the work item (which we can do in ib_cq_poll_work). Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>-- Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-24i40iw: Receive netdev events post INET_NOTIFIER stateShiraz Saleem1-0/+8
Netdev notification events are de-registered only when all client iwdev instances are removed. If a single client is closed and re-opened, netdev events could arrive even before the Control Queue-Pair (CQP) is created, causing a NULL pointer dereference crash in i40iw_get_cqp_request. Fix this by allowing netdev event notification only after we have reached the INET_NOTIFIER state with respect to device initialization. Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-19Linux 4.11-rc3Linus Torvalds1-1/+1
2017-03-19mm/swap: don't BUG_ON() due to uninitialized swap slot cacheLinus Torvalds1-1/+1
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-18qla2xxx: Update driver version to 9.00.00.00-kHimanshu Madhani1-3/+3
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix delayed response to command for loop mode/direct connect.Quinn Tran6-20/+81
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Change scsi host lookup method.Quinn Tran7-40/+100
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add DebugFS node to display Port DatabaseHimanshu Madhani2-4/+90
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Use IOCB interface to submit non-critical MBX.Quinn Tran6-65/+279
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add async new target notificationQuinn Tran2-3/+4
Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Export DIF stats via debugfsAnil Gurumurthy2-0/+27
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Improve T10-DIF/PI handling in driver.Quinn Tran7-251/+406
Add routines to support T10 DIF tag. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow relogin to proceed if remote login did not finishQuinn Tran4-8/+32
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix sess_lock & hardware_lock lock order problem.Quinn Tran1-23/+18
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix inadequate lock protection for ABTS.Quinn Tran1-2/+10
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix request queue corruption.Quinn Tran1-3/+9
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix memory leak for abts processingQuinn Tran1-0/+2
Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow vref count to timeout on vport delete.Joe Carnuccio5-10/+16
Cc: <stable@vger.kernel.org> Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: Convert cmd_time_out into backend device attributeNicholas Bellinger1-26/+68
Instead of putting cmd_time_out under ../target/core/user_0/foo/control, which has historically been used by parameters needed for initial backend device configuration, go ahead and move cmd_time_out into a backend device attribute. In order to do this, tcmu_module_init() has been updated to create a local struct configfs_attribute **tcmu_attrs, that is based upon the existing passthrough_attrib_attrs along with the new cmd_time_out attribute. Once **tcm_attrs has been setup, go ahead and point it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core. Also following MNC's previous change, ->cmd_time_out is stored in milliseconds but exposed via configfs in seconds. Also, note this patch restricts the modification of ->cmd_time_out to before + after the TCMU device has been configured, but not while it has active fabric exports. Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: make cmd timeout configurableMike Christie1-6/+35
A single daemon could implement multiple types of devices using multuple types of real devices that may not support restarting from crashes and/or handling tcmu timeouts. This makes the cmd timeout configurable, so handlers that do not support it can turn if off for now. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: add helper to check if dev was configuredMike Christie1-2/+6
This adds a helper to check if the dev was configured. It will be used in the next patch to prevent updates to some config settings after the device has been setup. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fix race during implicit transition work flushesMike Christie1-9/+1
This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow userspace to set state to transitioningMike Christie1-15/+22
Userspace target_core_user handlers like tcmu-runner may want to set the ALUA state to transitioning while it does implicit transitions. This patch allows that state when set from configfs. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fix ALUA transition timeout handlingMike Christie2-16/+9
The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: Use system workqueue for ALUA transitionsMike Christie1-5/+3
If tcmu-runner is processing a STPG and needs to change the kernel's ALUA state then we cannot use the same work queue for task management requests and ALUA transitions, because we could deadlock. The problem occurs when a STPG times out before tcmu-runner is able to call into target_tg_pt_gp_alua_access_state_store-> core_alua_do_port_transition -> core_alua_do_transition_tg_pt -> queue_work. In this case, the tmr is on the work queue waiting for the STPG to complete, but the STPG transition is now queued behind the waiting tmr. Note: This bug will also be fixed by this patch: http://www.spinics.net/lists/target-devel/msg14560.html which switches the tmr code to use the system workqueues. For both, I am not sure if we need a dedicated workqueue since it is not a performance path and I do not think we need WQ_MEM_RECLAIM to make forward progress to free up memory like the block layer does. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fail ALUA transitions for pscsiMike Christie1-0/+3
We do not setup the LU group for pscsi devices, so if you write a state to alua_access_state that will cause a transition you will get a NULL pointer dereference. This patch will fail attempts to try and transition the path for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA flag. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow ALUA setup for some passthrough backendsMike Christie4-7/+15
This patch allows passthrough backends to use the core/base LIO ALUA setup and state checks, but still handle the execution of commands. This will allow the target_core_user module to execute STPG and RTPG in userspace, and not have to duplicate the ALUA state checks, path information (needed so we can check if command is executable on specific paths) and setup (rtslib sets/updates the configfs ALUA interface like it does for iblock or file). For STPG, the target_core_user userspace daemon, tcmu-runner will still execute the STPG, and to update the core/base LIO state it will use the existing configfs interface. For RTPG, tcmu-runner will loop over configfs and/or cache the state. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: return on first Opt parse failureMike Christie1-0/+3
We only were returing failure if the last opt to be parsed failed. This has a return failure when we first detect a failure. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: allow hw_max_sectors greater than 128Mike Christie1-19/+35
tcmu hard codes the hw_max_sectors to 128 which is a litle small. Userspace uses the max_sectors to report the optimal IO size and some initiators perform better with larger IOs (open-iscsi seems to do better with 256 to 512 depending on the test). (Fix do not display hw max sectors twice - MNC) Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: Drop pointless tfo->check_stop_free checkNicholas Bellinger2-2/+5
All in-tree fabric drivers provide a tfo->check_stop_free(), so there is no need to do the extra check within existing transport_cmd_check_stop_to_fabric() code. Just to be sure, add a check in target_fabric_tf_ops_check() to notify any out-of-tree drivers that might be missing it. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18parisc: Fix system shutdown haltHelge Deller1-0/+2
On those parisc machines which don't provide a software power off function, the system currently kills the init process at the end of a shutdown and unexpectedly restarts insteads of halting. Fix it by adding a loop which will not return. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.9+
2017-03-18parisc: perf: Fix potential NULL pointer dereferenceArvind Yadav1-45/+49
Fix potential NULL pointer dereference and clean up coding style errors (code indent, trailing whitespaces). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-17pNFS/flexfiles: never nfs4_mark_deviceid_unavailableWeston Andros Adamson4-10/+31
The flexfiles layout should never mark a device unavailable. Move nfs4_mark_deviceid_unavailable out of nfs4_pnfs_ds_connect and call directly from files layout where it's still needed. The flexfiles driver still handles marked devices in error paths, but will now print a rate limited warning. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17pNFS: return status from nfs4_pnfs_ds_connectWeston Andros Adamson6-6/+48
The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it can wait on another context to reach the same failure. This checks that the rpc_create succeeded and returns the error to the caller. When an error is returned, both the files and flexfiles layouts will return NULL from _prepare_ds(). The flexfiles layout will also return the layout with the error NFS4ERR_NXIO. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17NFSv4.1 respect server's max size in CREATE_SESSIONOlga Kornievskaia1-2/+2
Currently client doesn't respect max sizes server returns in CREATE_SESSION. nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0 so they never get set to the sizes returned by the server. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17NFS prevent double free in async nfs4_exchange_idOlga Kornievskaia1-5/+4
Since rpc_task is async, the release function should be called which will free the impl_id, scope, and owner. Trond pointed at 2 more problems: -- use of client pointer after free in the nfs4_exchangeid_release() function -- cl_count mismatch if rpc_run_task() isn't run Fixes: 8d89bd70bc9 ("NFS setup async exchange_id") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Cc: stable@vger.kernel.org # 4.9 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17nfs: make nfs4_cb_sv_ops staticJason Yan1-2/+2
Fixes the following sparse warning: fs/nfs/callback.c:235:21: warning: symbol 'nfs4_cb_sv_ops' was not declared. Should it be static? Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17xprtrdma: Squelch kbuild sparse complaintChuck Lever1-1/+2
New complaint from kbuild for 4.9.y: net/sunrpc/xprtrdma/verbs.c:489:19: sparse: incompatible types in comparison expression (different type sizes) verbs.c: 489 max_sge = min(ia->ri_device->attrs.max_sge, RPCRDMA_MAX_SEND_SGES); I can't reproduce this running sparse here. Likewise, "make W=1 net/sunrpc/xprtrdma/verbs.o" never indicated any issue. A little poking suggests that because the range of its values is small, gcc can make the actual width of RPCRDMA_MAX_SEND_SGES smaller than the width of an unsigned integer. Fixes: 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@kernel.org Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17NFS: fix the fault nrequests decreasing for nfs_inode COPYKinglong Mee1-2/+4
The nfs_commit_file for NFSv4.2's COPY operation goes through the commit path for normal WRITE, but without increase nrequests, so, the nrequests decreased in nfs_commit_release_pages is fault. After that, the nrequests will be wrong. [ 5670.299881] ------------[ cut here ]------------ [ 5670.300295] WARNING: CPU: 0 PID: 27656 at fs/nfs/inode.c:127 nfs_clear_inode+0x66/0x90 [nfs] [ 5670.300558] Modules linked in: nfsv4(E) nfs(E) fscache(E) tun bridge stp llc fuse ip_set nfnetlink vmw_vsock_vmci_transport vsock snd_seq_midi snd_seq_midi_event ppdev f2fs coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_ens1371 intel_rapl_perf gameport snd_ac97_codec vmw_balloon ac97_bus snd_seq snd_pcm joydev snd_rawmidi snd_timer snd_seq_device snd soundcore nfit parport_pc parport acpi_cpufreq tpm_tis tpm_tis_core tpm i2c_piix4 vmw_vmci shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c vmwgfx drm_kms_helper ttm drm e1000 crc32c_intel mptspi scsi_transport_spi serio_raw mptscsih mptbase ata_generic pata_acpi fjes [last unloaded: fscache] [ 5670.302925] CPU: 0 PID: 27656 Comm: umount.nfs4 Tainted: G W E 4.11.0-rc1+ #519 [ 5670.303292] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 5670.304094] Call Trace: [ 5670.304510] dump_stack+0x63/0x86 [ 5670.304917] __warn+0xcb/0xf0 [ 5670.305276] warn_slowpath_null+0x1d/0x20 [ 5670.305661] nfs_clear_inode+0x66/0x90 [nfs] [ 5670.306093] nfs4_evict_inode+0x61/0x70 [nfsv4] [ 5670.306480] evict+0xbb/0x1c0 [ 5670.306888] dispose_list+0x4d/0x70 [ 5670.307233] evict_inodes+0x178/0x1a0 [ 5670.307579] generic_shutdown_super+0x44/0xf0 [ 5670.307985] nfs_kill_super+0x21/0x40 [nfs] [ 5670.308325] deactivate_locked_super+0x43/0x70 [ 5670.308698] deactivate_super+0x5a/0x60 [ 5670.309036] cleanup_mnt+0x3f/0x90 [ 5670.309407] __cleanup_mnt+0x12/0x20 [ 5670.309837] task_work_run+0x80/0xa0 [ 5670.310162] exit_to_usermode_loop+0x89/0x90 [ 5670.310497] syscall_return_slowpath+0xaa/0xb0 [ 5670.310875] entry_SYSCALL_64_fastpath+0xa7/0xa9 [ 5670.311197] RIP: 0033:0x7f1bb3617fe7 [ 5670.311545] RSP: 002b:00007ffecbabb828 EFLAGS: 00000206 ORIG_RAX: 00000000000000a6 [ 5670.311906] RAX: 0000000000000000 RBX: 0000000001dca1f0 RCX: 00007f1bb3617fe7 [ 5670.312239] RDX: 000000000000000c RSI: 0000000000000001 RDI: 0000000001dc83c0 [ 5670.312653] RBP: 0000000001dc83c0 R08: 0000000000000001 R09: 0000000000000000 [ 5670.312998] R10: 0000000000000755 R11: 0000000000000206 R12: 00007ffecbabc66a [ 5670.313335] R13: 0000000001dc83a0 R14: 0000000000000000 R15: 0000000000000000 [ 5670.313758] ---[ end trace bf4bfe7764e4eb40 ]--- Cc: linux-kernel@vger.kernel.org Fixes: 67911c8f18 ("NFS: Add nfs_commit_file()") Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-03-17perf symbols: Fix symbols__fixup_end heuristic for corner casesDaniel Borkmann1-1/+1
The current symbols__fixup_end() heuristic for the last entry in the rb tree is suboptimal as it leads to not being able to recognize the symbol in the call graph in a couple of corner cases, for example: i) If the symbol has a start address (f.e. exposed via kallsyms) that is at a page boundary, then the roundup(curr->start, 4096) for the last entry will result in curr->start == curr->end with a symbol length of zero. ii) If the symbol has a start address that is shortly before a page boundary, then also here, curr->end - curr->start will just be very few bytes, where it's unrealistic that we could perform a match against. Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so that we can catch such corner cases and have a better chance to find that specific symbol. It's still just best effort as the real end of the symbol is unknown to us (and could even be at a larger offset than the current range), but better than the current situation. Alexei reported that he recently run into case i) with a JITed eBPF program (these are all page aligned) as the last symbol which wasn't properly shown in the call graph (while other eBPF program symbols in the rb tree were displayed correctly). Since this is a generic issue, lets try to improve the heuristic a bit. Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup") Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17x86/perf: Clarify why x86_pmu_event_mapped() isn't racyAndy Lutomirski1-0/+12
Naively, it looks racy, but ->mmap_sem saves it. Add a comment and a lockdep assertion. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/03a1e629063899168dfc4707f3bb6e581e21f5c6.1489694270.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-17x86/perf: Fix CR4.PCE propagation to use active_mm instead of mmAndy Lutomirski1-2/+2
If one thread mmaps a perf event while another thread in the same mm is in some context where active_mm != mm (which can happen in the scheduler, for example), refresh_pce() would write the wrong value to CR4.PCE. This broke some PAPI tests. Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 7911d3f7af14 ("perf/x86: Only allow rdpmc if a perf_event is mapped") Link: http://lkml.kernel.org/r/0c5b38a76ea50e405f9abe07a13dfaef87c173a1.1489694270.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-17powerpc/pseries: Don't give a warning when HPT resizing isn't availableMichael Ellerman1-1/+3
As of commit 438cc81a41e8 ("powerpc/pseries: Automatically resize HPT for memory hot add/remove"), when running on the pseries platform, we always attempt to use the PAPR extension to resize the hashed page table (HPT) when we add or remove memory. This is fine, but when the extension is not available we'll give a harmless, but scary warning. Instead check if the firmware supports HPT resizing before populating the mmu_hash_ops.resize_hpt pointer. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-16drivers core: remove assert_held_device_hotplug()Heiko Carstens2-6/+0
The last caller of assert_held_device_hotplug() is gone, so remove it again. Link: http://lkml.kernel.org/r/20170314125226.16779-3-heiko.carstens@de.ibm.com Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-16mm: add private lock to serialize memory hotplug operationsHeiko Carstens2-5/+5
Commit bfc8c90139eb ("mem-hotplug: implement get/put_online_mems") introduced new functions get/put_online_mems() and mem_hotplug_begin/end() in order to allow similar semantics for memory hotplug like for cpu hotplug. The corresponding functions for cpu hotplug are get/put_online_cpus() and cpu_hotplug_begin/done() for cpu hotplug. The commit however missed to introduce functions that would serialize memory hotplug operations like they are done for cpu hotplug with cpu_maps_update_begin/done(). This basically leaves mem_hotplug.active_writer unprotected and allows concurrent writers to modify it, which may lead to problems as outlined by commit f931ab479dd2 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}"). That commit was extended again with commit b5d24fda9c3d ("mm, devm_memremap_pages: hold device_hotplug lock over mem_hotplug_{begin, done}") which serializes memory hotplug operations for some call sites by using the device_hotplug lock. In addition with commit 3fc21924100b ("mm: validate device_hotplug is held for memory hotplug") a sanity check was added to mem_hotplug_begin() to verify that the device_hotplug lock is held. This in turn triggers the following warning on s390: WARNING: CPU: 6 PID: 1 at drivers/base/core.c:643 assert_held_device_hotplug+0x4a/0x58 Call Trace: assert_held_device_hotplug+0x40/0x58) mem_hotplug_begin+0x34/0xc8 add_memory_resource+0x7e/0x1f8 add_memory+0xda/0x130 add_memory_merged+0x15c/0x178 sclp_detect_standby_memory+0x2ae/0x2f8 do_one_initcall+0xa2/0x150 kernel_init_freeable+0x228/0x2d8 kernel_init+0x2a/0x140 kernel_thread_starter+0x6/0xc One possible fix would be to add more lock_device_hotplug() and unlock_device_hotplug() calls around each call site of mem_hotplug_begin/end(). But that would give the device_hotplug lock additional semantics it better should not have (serialize memory hotplug operations). Instead add a new memory_add_remove_lock which has the similar semantics like cpu_add_remove_lock for cpu hotplug. To keep things hopefully a bit easier the lock will be locked and unlocked within the mem_hotplug_begin/end() functions. Link: http://lkml.kernel.org/r/20170314125226.16779-2-heiko.carstens@de.ibm.com Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.