aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/vfio (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-05-01vfio: Fix runaway interruptible timeoutAlex Williamson1-3/+18
Commit 13060b64b819 ("vfio: Add and use device request op for vfio bus drivers") incorrectly makes use of an interruptible timeout. When interrupted, the signal remains pending resulting in subsequent timeouts occurring instantly. This makes the loop spin at a much higher rate than intended. Instead of making this completely non-interruptible, we can change this into a sort of interruptible-once behavior and use the "once" to log debug information. The driver API doesn't allow us to abort and return an error code. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Fixes: 13060b64b819 Cc: stable@vger.kernel.org # v4.0
2015-05-01vfio-pci: Log device requests more verboselyAlex Williamson1-1/+7
Log some clues indicating whether the user is receiving device request interfaces or not listening. This can help indicate why a driver unbind is blocked or explain why QEMU automatically unplugged a device from the VM. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-08vfio-pci: Fix use after freeAlex Williamson1-0/+1
Reported by 0-day test infrastructure. Fixes: ecaa1f6a0154 ("vfio-pci: Add VGA arbiter client") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Move idle devices to D3hot power stateAlex Williamson1-3/+33
We can save some power by putting devices that are bound to vfio-pci but not in use by the user in the D3hot power state. Devices get woken into D0 when opened by the user. Resets return the device to D0, so we need to re-apply the low power state after a bus reset. It's tempting to try to use D3cold, but we have no reason to inhibit hotplug of idle devices and we might get into a loop of having the device disappear before we have a chance to try to use it. A new module parameter allows this feature to be disabled if there are devices that misbehave as a result of this change. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Remove warning if try-reset failsAlex Williamson1-8/+2
As indicated in the comment, this is not entirely uncommon and causes user concern for no reason. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Allow PCI IDs to be specified as module optionsAlex Williamson1-0/+49
This copies the same support from pci-stub for exactly the same purpose, enabling a set of PCI IDs to be automatically added to the driver's dynamic ID table at module load time. The code here is pretty simple and both vfio-pci and pci-stub are fairly unique in being meta drivers, capable of attaching to any device, so there's no attempt made to generalize the code into pci-core. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Add VGA arbiter clientAlex Williamson1-4/+63
If VFIO VGA access is disabled for the user, either by CONFIG option or module parameter, we can often opt-out of VGA arbitration. We can do this when PCI bridge control of VGA routing is possible. This means that we must have a parent bridge and there must only be a single VGA device below that bridge. Fortunately this is the typical case for discrete GPUs. Doing this allows us to minimize the impact of additional GPUs, in terms of VGA arbitration, when they are only used via vfio-pci for non-VGA applications. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-04-07vfio-pci: Add module option to disable VGA region accessAlex Williamson1-3/+16
Add a module option so that we don't require a CONFIG change and kernel rebuild to disable VGA support. Not only can VGA support be troublesome in itself, but by disabling it we can reduce the impact to host devices by doing a VGA arbitration opt-out. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17vfio: Split virqfd into a separate module for vfio bus driversAlex Williamson6-12/+25
An unintended consequence of commit 42ac9bd18d4f ("vfio: initialize the virqfd workqueue in VFIO generic code") is that the vfio module is renamed to vfio_core so that it can include both vfio and virqfd. That's a user visible change that may break module loading scritps and it imposes eventfd support as a dependency on the core vfio code, which it's really not. virqfd is intended to be provided as a service to vfio bus drivers, so instead of wrapping it into vfio.ko, we can make it a stand-alone module toggled by vfio bus drivers. This has the additional benefit of removing initialization and exit from the core vfio code. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-17vfio: virqfd_lock can be statickbuild test robot1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: put off the allocation of "minor" in vfio_create_groupZhen Lei1-7/+6
The next code fragment "list_for_each_entry" is not depend on "minor". With this patch, the free of "minor" in "list_for_each_entry" can be reduced, and there is no functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: implement IRQ masking/unmasking via an eventfdAntonios Motakis2-4/+45
With this patch the VFIO user will be able to set an eventfd that can be used in order to mask and unmask IRQs of platform devices. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: initialize the virqfd workqueue in VFIO generic codeAntonios Motakis4-11/+12
Now we have finally completely decoupled virqfd from VFIO_PCI. We can initialize it from the VFIO generic code, in order to safely use it from multiple independent VFIO bus drivers. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: move eventfd support code for VFIO_PCI to a separate fileAntonios Motakis4-219/+215
The virqfd functionality that is used by VFIO_PCI to implement interrupt masking and unmasking via an eventfd, is generic enough and can be reused by another driver. Move it to a separate file in order to allow the code to be shared. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: pass an opaque pointer on virqfd initializationAntonios Motakis1-14/+16
VFIO_PCI passes the VFIO device structure *vdev via eventfd to the handler that implements masking/unmasking of IRQs via an eventfd. We can replace it in the virqfd infrastructure with an opaque type so we can make use of the mechanism from other VFIO bus drivers. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: add local lock for virqfd instead of depending on VFIO PCIAntonios Motakis1-15/+16
The Virqfd code needs to keep accesses to any struct *virqfd safe, but this comes into play only when creating or destroying eventfds, so sharing the same spinlock with the VFIO bus driver is not necessary. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: virqfd: rename vfio_pci_virqfd_init and vfio_pci_virqfd_exitAntonios Motakis3-7/+7
The functions vfio_pci_virqfd_init and vfio_pci_virqfd_exit are not really PCI specific, since we plan to reuse the virqfd code with more VFIO drivers in addition to VFIO_PCI. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> [Baptiste Reynal: Move rename vfio_pci_virqfd_init and vfio_pci_virqfd_exit from "vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and export"] Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: add a vfio_ prefix to virqfd_enable and virqfd_disable and exportAntonios Motakis1-14/+16
We want to reuse virqfd functionality in multiple VFIO drivers; before moving these functions to core VFIO, add the vfio_ prefix to the virqfd_enable and virqfd_disable functions, and export them so they can be used from other modules. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: support for level sensitive interruptsAntonios Motakis2-3/+102
Level sensitive interrupts are exposed as maskable and automasked interrupts and are masked and disabled automatically when they fire. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> [Baptiste Reynal: Move masked interrupt initialization from "vfio/platform: trigger an interrupt via eventfd"] Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: trigger an interrupt via eventfdAntonios Motakis2-2/+94
This patch allows to set an eventfd for a platform device's interrupt, and also to trigger the interrupt eventfd from userspace for testing. Level sensitive interrupts are marked as maskable and are handled in a later patch. Edge triggered interrupts are not advertised as maskable and are implemented here using a simple and efficient IRQ handler. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> [Baptiste Reynal: fix masked interrupt initialization] Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: initial interrupts support codeAntonios Motakis3-3/+115
This patch is a skeleton for the VFIO_DEVICE_SET_IRQS IOCTL, around which most IRQ functionality is implemented in VFIO. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: return IRQ infoAntonios Motakis4-5/+89
Return information for the interrupts exposed by the device. This patch extends VFIO_DEVICE_GET_INFO with the number of IRQs and enables VFIO_DEVICE_GET_IRQ_INFO. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: support MMAP of MMIO regionsAntonios Motakis1-0/+65
Allow to memory map the MMIO regions of the device so userspace can directly access them. PIO regions are not being handled at this point. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: read and write support for the device fdAntonios Motakis2-0/+151
VFIO returns a file descriptor which we can use to manipulate the memory regions of the device. Usually, the user will mmap memory regions that are addressable on page boundaries, however for memory regions where this is not the case we cannot provide mmap functionality due to security concerns. For this reason we also allow to use read and write functions to the file descriptor pointing to the memory regions. We implement this functionality only for MMIO regions of platform devices; PIO regions are not being handled at this point. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: return info for device memory mapped IO regionsAntonios Motakis2-4/+124
This patch enables the IOCTLs VFIO_DEVICE_GET_REGION_INFO ioctl call, which allows the user to learn about the available MMIO resources of a device. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: return info for bound deviceAntonios Motakis1-3/+21
A VFIO userspace driver will start by opening the VFIO device that corresponds to an IOMMU group, and will use the ioctl interface to get the basic device info, such as number of memory regions and interrupts, and their properties. This patch enables the VFIO_DEVICE_GET_INFO ioctl call. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> [Baptiste Reynal: added include in vfio_platform_common.c] Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: amba: add the VFIO for AMBA devices module to KconfigAntonios Motakis2-0/+14
Enable building the VFIO AMBA driver. VFIO_AMBA depends on VFIO_PLATFORM, since it is sharing a portion of the code, and it is essentially implemented as a platform device whose resources are discovered via AMBA specific APIs in the kernel. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: amba: VFIO support for AMBA devicesAntonios Motakis1-0/+115
Add support for discovering AMBA devices with VFIO and handle them similarly to Linux platform devices. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: platform: add the VFIO PLATFORM module to KconfigAntonios Motakis4-0/+15
Enable building the VFIO PLATFORM driver that allows to use Linux platform devices with VFIO. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio: platform: probe to devices on the platform busAntonios Motakis1-0/+103
Driver to bind to Linux platform devices, and callbacks to discover their resources to be used by the main VFIO PLATFORM code. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-16vfio/platform: initial skeleton of VFIO support for platform devicesAntonios Motakis2-0/+160
This patch forms the common skeleton code for platform devices support with VFIO. This will include the core functionality of VFIO_PLATFORM, however binding to the device and discovering the device resources will be done with the help of a separate file where any Linux platform bus specific code will reside. This will allow us to implement support for also discovering AMBA devices and their resources, but still reuse a large part of the VFIO_PLATFORM implementation. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> [Baptiste Reynal: added includes in vfio_platform_private.h] Signed-off-by: Baptiste Reynal <b.reynal@virtualopensystems.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-03-12vfio-pci: Add missing break to enable VFIO_PCI_ERR_IRQ_INDEXAlexey Kardashevskiy1-0/+2
This adds a missing break statement to VFIO_DEVICE_SET_IRQS handler without which vfio_pci_set_err_trigger() would never be called. While we are here, add another "break" to VFIO_PCI_REQ_IRQ_INDEX case so if we add more indexes later, we won't miss it. Fixes: 6140a8f56238 ("vfio-pci: Add device request interface") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-10vfio-pci: Add device request interfaceAlex Williamson3-1/+37
Userspace can opt to receive a device request notification, indicating that the device should be released. This is setup the same way as the error IRQ and also supports eventfd signaling. Future support may forcefully remove the device from the user if the request is ignored. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-10vfio-pci: Generalize setup of simple eventfdsAlex Williamson1-15/+29
We want another single vector IRQ index to support signaling of the device request to userspace. Generalize the error reporting IRQ index to avoid code duplication. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-10vfio: Add and use device request op for vfio bus driversAlex Williamson1-2/+22
When a request is made to unbind a device from a vfio bus driver, we need to wait for the device to become unused, ie. for userspace to release the device. However, we have a long standing TODO in the code to do something proactive to make that happen. To enable this, we add a request callback on the vfio bus driver struct, which is intended to signal the user through the vfio device interface to release the device. Instead of passively waiting for the device to become unused, we can now pester the user to give it up. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06vfio: Tie IOMMU group reference to vfio groupAlex Williamson1-8/+11
Move the iommu_group reference from the device to the vfio_group. This ensures that the iommu_group persists as long as the vfio_group remains. This can be important if all of the device from an iommu_group are removed, but we still have an outstanding vfio_group reference; we can still walk the empty list of devices. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06vfio: Add device tracking during unbindAlex Williamson1-5/+71
There's a small window between the vfio bus driver calling vfio_del_group_dev() and the device being completely unbound where the vfio group appears to be non-viable. This creates a race for users like QEMU/KVM where the kvm-vfio module tries to get an external reference to the group in order to match and release an existing reference, while the device is potentially being removed from the vfio bus driver. If the group is momentarily non-viable, kvm-vfio may not be able to release the group reference until VM shutdown, making the group unusable until that point. Bridge the gap between device removal from the group and completion of the driver unbind by tracking it in a list. The device is added to the list before the bus driver reference is released and removed using the existing unbind notifier. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06vfio/type1: Add conditional reschedulingAlex Williamson1-1/+7
IOMMU operations can be expensive and it's not very difficult for a user to give us a lot of work to do for a map or unmap operation. Killing a large VM will vfio assigned devices can result in soft lockups and IOMMU tracing shows that we can easily spend 80% of our time with need-resched set. A sprinkling of conf_resched() calls after map and unmap calls has a very tiny affect on performance while resulting in traces with <1% of calls overflowing into needs- resched. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06vfio/type1: Chunk contiguous reserved/invalid page mappingsAlex Williamson1-7/+11
We currently map invalid and reserved pages, such as often occur from mapping MMIO regions of a VM through the IOMMU, using single pages. There's really no reason we can't instead follow the methodology we use for normal pages and find the largest possible physically contiguous chunk for mapping. The only difference is that we don't do locked memory accounting for these since they're not back by RAM. In most applications this will be a very minor improvement, but when graphics and GPGPU devices are in play, MMIO BARs become non-trivial. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-02-06vfio/type1: DMA unmap chunkingAlex Williamson1-3/+51
When unmapping DMA entries we try to rely on the IOMMU API behavior that allows the IOMMU to unmap a larger area than requested, up to the size of the original mapping. This works great when the IOMMU supports superpages *and* they're in use. Otherwise, each PAGE_SIZE increment is unmapped separately, resulting in poor performance. Instead we can use the IOVA-to-physical-address translation provided by the IOMMU API and unmap using the largest contiguous physical memory chunk available, which is also how vfio/type1 would have mapped the region. For a synthetic 1TB guest VM mapping and shutdown test on Intel VT-d (2M IOMMU pagesize support), this achieves about a 30% overall improvement mapping standard 4K pages, regardless of IOMMU superpage enabling, and about a 40% improvement mapping 2M hugetlbfs pages when IOMMU superpages are not available. Hugetlbfs with IOMMU superpages enabled is effectively unchanged. Unfortunately the same algorithm does not work well on IOMMUs with fine-grained superpages, like AMD-Vi, costing about 25% extra since the IOMMU will automatically unmap any power-of-two contiguous mapping we've provided it. We add a routine and a domain flag to detect this feature, leaving AMD-Vi unaffected by this unmap optimization. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-01-07vfio-pci: Fix the check on pci device type in vfio_pci_probe()Wei Yang1-3/+1
Current vfio-pci just supports normal pci device, so vfio_pci_probe() will return if the pci device is not a normal device. While current code makes a mistake. PCI_HEADER_TYPE is the offset in configuration space of the device type, but we use this value to mask the type value. This patch fixs this by do the check directly on the pci_dev->hdr_type. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org # v3.6+
2014-12-17Merge tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds4-3/+19
Pull VFIO updates from Alex Williamson: - s390 support (Frank Blaschka) - Enable iommu-type1 for ARM SMMU (Will Deacon) * tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio: drivers/vfio: allow type-1 IOMMU instantiation on top of an ARM SMMU vfio: make vfio run on s390
2014-11-23PCI/MSI: Rename write_msi_msg() to pci_write_msi_msg()Jiang Liu1-1/+1
Rename write_msi_msg() to pci_write_msi_msg() to mark it as PCI specific. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14drivers/vfio: allow type-1 IOMMU instantiation on top of an ARM SMMUWill Deacon1-1/+1
The ARM SMMU driver is compatible with the notion of a type-1 IOMMU in VFIO. This patch allows VFIO_IOMMU_TYPE1 to be selected if ARM_SMMU=y. Signed-off-by: Will Deacon <will.deacon@arm.com> [aw: update for existing S390 patch] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-11-07vfio: make vfio run on s390Frank Blaschka4-3/+19
add Kconfig switch to hide INTx add Kconfig switch to let vfio announce PCI BARs are not mapable Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-10-15Merge tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-2/+2
Pull IOMMU updates from Joerg Roedel: "This pull-request includes: - change in the IOMMU-API to convert the former iommu_domain_capable function to just iommu_capable - various fixes in handling RMRR ranges for the VT-d driver (one fix requires a device driver core change which was acked by Greg KH) - the AMD IOMMU driver now assigns and deassigns complete alias groups to fix issues with devices using the wrong PCI request-id - MMU-401 support for the ARM SMMU driver - multi-master IOMMU group support for the ARM SMMU driver - various other small fixes all over the place" * tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/vt-d: Work around broken RMRR firmware entries iommu/vt-d: Store bus information in RMRR PCI device path iommu/vt-d: Only remove domain when device is removed driver core: Add BUS_NOTIFY_REMOVED_DEVICE event iommu/amd: Fix devid mapping for ivrs_ioapic override iommu/irq_remapping: Fix the regression of hpet irq remapping iommu: Fix bus notifier breakage iommu/amd: Split init_iommu_group() from iommu_init_device() iommu: Rework iommu_group_get_for_pci_dev() iommu: Make of_device_id array const amd_iommu: do not dereference a NULL pointer address. iommu/omap: Remove omap_iommu unused owner field iommu: Remove iommu_domain_has_cap() API function IB/usnic: Convert to use new iommu_capable() API function vfio: Convert to use new iommu_capable() API function kvm: iommu: Convert to use new iommu_capable() API function iommu/tegra: Convert to iommu_capable() API function iommu/msm: Convert to iommu_capable() API function iommu/vt-d: Convert to iommu_capable() API function iommu/fsl: Convert to iommu_capable() API function ...
2014-10-11Merge tag 'vfio-v3.18-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds4-85/+98
Pull VFIO updates from Alex Williamson: - Nested IOMMU extension to type1 (Will Deacon) - Restore MSIx message before enabling (Gavin Shan) - Fix remove path locking (Alex Williamson) * tag 'vfio-v3.18-rc1' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix remove path locking drivers/vfio: Export vfio_spapr_iommu_eeh_ioctl() with GPL vfio/pci: Restore MSIx message prior to enabling PCI: Export MSI message relevant functions vfio/iommu_type1: add new VFIO_TYPE1_NESTING_IOMMU IOMMU type iommu: introduce domain attribute for nesting IOMMUs
2014-09-29vfio-pci: Fix remove path lockingAlex Williamson1-79/+57
Locking both the remove() and release() path results in a deadlock that should have been obvious. To fix this we can get and hold the vfio_device reference as we evaluate whether to do a bus/slot reset. This will automatically block any remove() calls, allowing us to remove the explict lock. Fixes 61d792562b53. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org [3.17]
2014-09-29drivers/vfio: Export vfio_spapr_iommu_eeh_ioctl() with GPLGavin Shan1-1/+1
The function should have been exported with EXPORT_SYMBOL_GPL() as part of commit 92d18a6851fb ("drivers/vfio: Fix EEH build error"). Suggested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-09-29vfio/pci: Restore MSIx message prior to enablingGavin Shan1-0/+15
The MSIx vector table lives in device memory, which may be cleared as part of a backdoor device reset. This is the case on the IBM IPR HBA when the BIST is run on the device. When assigned to a QEMU guest, the guest driver does a pci_save_state(), issues a BIST, then does a pci_restore_state(). The BIST clears the MSIx vector table, but due to the way interrupts are configured the pci_restore_state() does not restore the vector table as expected. Eventually this results in an EEH error on Power platforms when the device attempts to signal an interrupt with the zero'd table entry. Fix the problem by restoring the host cached MSI message prior to enabling each vector. Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.