aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/vhost (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) ICE, E1000, IGB, IXGBE, and I40E bug fixes from the Intel folks. 2) Better fix for AB-BA deadlock in packet scheduler code, from Cong Wang. 3) bpf sockmap fixes (zero sized key handling, etc.) from Daniel Borkmann. 4) Send zero IPID in TCP resets and SYN-RECV state ACKs, to prevent attackers using it as a side-channel. From Eric Dumazet. 5) Memory leak in mediatek bluetooth driver, from Gustavo A. R. Silva. 6) Hook up rt->dst.input of ipv6 anycast routes properly, from Hangbin Liu. 7) hns and hns3 bug fixes from Huazhong Tan. 8) Fix RIF leak in mlxsw driver, from Ido Schimmel. 9) iova range check fix in vhost, from Jason Wang. 10) Fix hang in do_tcp_sendpages() with tls, from John Fastabend. 11) More r8152 chips need to disable RX aggregation, from Kai-Heng Feng. 12) Memory exposure in TCA_U32_SEL handling, from Kees Cook. 13) TCP BBR congestion control fixes from Kevin Yang. 14) hv_netvsc, ignore non-PCI devices, from Stephen Hemminger. 15) qed driver fixes from Tomer Tayar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: sched: Fix memory exposure from short TCA_U32_SEL qed: fix spelling mistake "comparsion" -> "comparison" vhost: correctly check the iova range when waking virtqueue qlge: Fix netdev features configuration. net: macb: do not disable MDIO bus at open/close time Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency" net: macb: Fix regression breaking non-MDIO fixed-link PHYs mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge i40e: fix condition of WARN_ONCE for stat strings i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled ixgbe: fix driver behaviour after issuing VFLR ixgbe: Prevent unsupported configurations with XDP ixgbe: Replace GFP_ATOMIC with GFP_KERNEL igb: Replace mdelay() with msleep() in igb_integrated_phy_loopback() igb: Replace GFP_ATOMIC with GFP_KERNEL in igb_sw_init() igb: Use an advanced ctx descriptor for launchtime e1000: ensure to free old tx/rx rings in set_ringparam() e1000: check on netif_running() before calling e1000_up() ixgb: use dma_zalloc_coherent instead of allocator/memset ice: Trivial formatting fixes ...
2018-08-25vhost: correctly check the iova range when waking virtqueueJason Wang1-1/+1
We don't wakeup the virtqueue if the first byte of pending iova range is the last byte of the range we just got updated. This will lead a virtqueue to wait for IOTLB updating forever. Fixing by correct the check and wake up the virtqueue in this case. Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Reported-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-24Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2-2/+2
Pull virtio updates from Michael Tsirkin: "virtio, vhost: fixes, tweaks No new features but a bunch of tweaks such as switching balloon from oom notifier to shrinker" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost/scsi: increase VHOST_SCSI_PREALLOC_PROT_SGLS to 2048 vhost: allow vhost-scsi driver to be built-in virtio: pci-legacy: Validate queue pfn virtio: mmio-v1: Validate queue PFN virtio_balloon: replace oom notifier with shrinker virtio-balloon: kzalloc the vb struct virtio-balloon: remove BUG() in init_vqs
2018-08-22vhost/scsi: increase VHOST_SCSI_PREALLOC_PROT_SGLS to 2048Greg Edwards1-1/+1
The current value of VHOST_SCSI_PREALLOC_PROT_SGLS is too small to accommodate larger I/Os, e.g. 16-32 MiB, when the VIRTIO_SCSI_F_T10_PI feature bit is negotiated and the backing store supports T10 PI. vhost-scsi rejects the command with errors like: [ 59.581317] vhost_scsi_calc_sgls: requested sgl_count: 1820 exceeds pre-allocated max_sgls: 512 Signed-off-by: Greg Edwards <gedwards@ddn.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-22vhost: allow vhost-scsi driver to be built-inGreg Edwards1-1/+1
It's useful to allow vhost-scsi to be built-in when testing vhost in L1 + L2 VMs and booting L1 VM with QEMU '-kernel' option. Signed-off-by: Greg Edwards <gedwards@ddn.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-9/+7
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-08-09Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+6
Overlapping changes in RXRPC, changing to ktime_get_seconds() whilst adding some tracepoints. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08vhost: reset metadata cache when initializing new IOTLBJason Wang1-3/+6
We need to reset metadata cache during new IOTLB initialization, otherwise the stale pointers to previous IOTLB may be still accessed which will lead a use after free. Reported-by: syzbot+c51e6736a1bf614b3272@syzkaller.appspotmail.com Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06vhost: switch to use new message formatJason Wang3-19/+93
We use to have message like: struct vhost_msg { int type; union { struct vhost_iotlb_msg iotlb; __u8 padding[64]; }; }; Unfortunately, there will be a hole of 32bit in 64bit machine because of the alignment. This leads a different formats between 32bit API and 64bit API. What's more it will break 32bit program running on 64bit machine. So fixing this by introducing a new message type with an explicit 32bit reserved field after type like: struct vhost_msg_v2 { __u32 type; __u32 reserved; union { struct vhost_iotlb_msg iotlb; __u8 padding[64]; }; }; We will have a consistent ABI after switching to use this. To enable this capability, introduce a new ioctl (VHOST_SET_BAKCEND_FEATURE) for userspace to enable this feature (VHOST_BACKEND_F_IOTLB_V2). Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02scsi: target: loop, usb, vhost, xen: use target_remove_sessionMike Christie1-1/+1
This converts drivers that were only calling transport_deregister_session to use target_remove_session. The calling of transport_deregister_session_configfs via target_remove_session for these types of drivers is ok, because they were not exporting info from fields like sess_acl_list, sess->se_tpg and sess->fabric_sess_ptr from configfs accessible functions, so they will see no difference. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: target: rename target_alloc_sessionMike Christie1-1/+1
Rename target_alloc_session to target_setup_session to avoid confusion with the other transport session allocation function that only allocates the session and because the target_alloc_session does so much more. It allocates the session, sets up the nacl and registers the session. The next patch will then add a remove function to match the setup in this one, so it should make sense for all drivers, except iscsi, to just call those 2 functions to setup and remove a session. iscsi will continue to be the odd driver. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Chris Boot <bootc@bootc.net> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: Johannes Thumshirn <jth@kernel.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Juergen Gross <jgross@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-22vhost_net: batch update used ring for datacopy TXJason Wang1-15/+25
Like commit e2b3b35eb989 ("vhost_net: batch used ring update in rx"), this patches implements batch used ring update for datacopy TX (zerocopy has already done some kind of batching). Testpmd transmission from guest to host (XDP_DROP on tap) shows 25.8% improvement (from ~3.1Mpps to ~3.9Mpps) on Broadwell i7-5600U CPU @ 2.60GHz machine. Netperf TCP tests does not show obvious differences. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22vhost_net: rename VHOST_RX_BATCH to VHOST_NET_BATCHJason Wang1-4/+4
A more generic name which could be used for TX as well. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22vhost_net: rename vhost_rx_signal_used() to vhost_net_signal_used()Jason Wang1-4/+4
Rename for reusing this for TX. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22vhost_net: split out datacopy logicJason Wang1-20/+90
Instead of mixing zerocopy and datacopy logics, this patch tries to split datacopy logic out. This results for a more compact code and ad-hoc optimization could be done on top more easily. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22vhost_net: introduce tx_can_batch()Jason Wang1-2/+7
Introduce tx_can_batch() to determine whether TX could be batched. This will help to reduce the code duplication in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22vhost_net: introduce get_tx_bufs()Jason Wang1-17/+32
Factor out logic of getting tx buffer and iov iter initialization. This will be used for reducing codes duplication in the future. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22vhost_net: introduce vhost_exceeds_weight()Jason Wang1-5/+8
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22vhost_net: introduce helper to initialize tx iov iterJason Wang1-9/+17
Introduce init_iov_iter() in order to be reused by future patch. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22vhost_net: drop unnecessary parameterJason Wang1-4/+2
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04vhost_net: Avoid rx vring kicks during busyloopToshiaki Makita1-3/+7
We may run out of avail rx ring descriptor under heavy load but busypoll did not detect it so busypoll may have exited prematurely. Avoid this by checking rx ring full during busypoll. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04vhost_net: Avoid rx queue wake-ups during busypollToshiaki Makita1-7/+19
We may run handle_rx() while rx work is queued. For example a packet can push the rx work during the window before handle_rx calls vhost_net_disable_vq(). In that case busypoll immediately exits due to vhost_has_work() condition and enables vq again. This can lead to another unnecessary rx wake-ups, so poll rx work instead of enabling the vq. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04vhost_net: Avoid tx vring kicks during busyloopToshiaki Makita1-13/+22
Under heavy load vhost busypoll may run without suppressing notification. For example tx zerocopy callback can push tx work while handle_tx() is running, then busyloop exits due to vhost_has_work() condition and enables notification but immediately reenters handle_tx() because the pushed work was tx. In this case handle_tx() tries to disable notification again, but when using event_idx it by design cannot. Then busyloop will run without suppressing notification. Another example is the case where handle_tx() tries to enable notification but avail idx is advanced so disables it again. This case also leads to the same situation with event_idx. The problem is that once we enter this situation busyloop does not work under heavy load for considerable amount of time, because notification is likely to happen during busyloop and handle_tx() immediately enables notification after notification happens. Specifically busyloop detects notification by vhost_has_work() and then handle_tx() calls vhost_enable_notify(). Because the detected work was the tx work, it enters handle_tx(), and enters busyloop without suppression again. This is likely to be repeated, so with event_idx we are almost not able to suppress notification in this case. To fix this, poll the work instead of enabling notification when busypoll is interrupted by something. IMHO vhost_has_work() is kind of interruption rather than a signal to completely cancel the busypoll, so let's run busypoll after the necessary work is done. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04vhost_net: Rename local variables in vhost_net_rx_peek_head_lenToshiaki Makita1-17/+17
So we can easily see which variable is for which, tx or rx. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02scsi: target: Remove second argument from fabric_make_tpg()Bart Van Assche1-3/+1
Since most target drivers do not use the second fabric_make_tpg() argument ("group") and since it is trivial to derive the group pointer from the wwn pointer, do not pass the group pointer to fabric_make_tpg(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-23vhost_net: validate sock before trying to put its fdJason Wang1-1/+2
Sock will be NULL if we pass -1 to vhost_net_set_backend(), but when we meet errors during ubuf allocation, the code does not check for NULL before calling sockfd_put(), this will lead NULL dereferencing. Fixing by checking sock pointer before. Fixes: bab632d69ee4 ("vhost: vhost TX zero-copy support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-19scsi: target: Convert target drivers to use sbitmapMatthew Wilcox1-3/+3
The sbitmap and the percpu_ida perform essentially the same task, allocating tags for commands. The sbitmap outperforms the percpu_ida as documented here: https://lkml.org/lkml/2014/4/22/553 The sbitmap interface is a little harder to use, but being able to remove the percpu_ida code and getting better performance justifies the additional complexity. Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> # f_tcm Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: target: Abstract tag freeingMatthew Wilcox1-1/+1
Introduce target_free_tag() and convert all drivers to use it. Signed-off-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-0/+3
Pull virtio updates from Michael Tsirkin: "virtio, vhost: features, fixes - PCI virtual function support for virtio - DMA barriers for virtio strong barriers - bugfixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: update the comments for transport features virtio_pci: support enabling VFs vhost: fix info leak due to uninitialized memory virtio_ring: switch to dma_XX barriers for rpmsg
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-6/+9
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook5-10/+15
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Convert vhost to struct_sizeMatthew Wilcox1-1/+2
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12vhost: fix info leak due to uninitialized memoryMichael S. Tsirkin1-0/+3
struct vhost_msg within struct vhost_msg_node is copied to userspace. Unfortunately it turns out on 64 bit systems vhost_msg has padding after type which gcc doesn't initialize, leaking 4 uninitialized bytes to userspace. This padding also unfortunately means 32 bit users of this interface are broken on a 64 bit kernel which will need to be fixed separately. Fixes: CVE-2018-1118 Cc: stable@vger.kernel.org Reported-by: Kevin Easton <kevin@guarana.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: syzbot+87cfa083e727a224754b@syzkaller.appspotmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-7/+12
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-04Merge branch 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull aio updates from Al Viro: "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly. The only thing I'm holding back for a day or so is Adam's aio ioprio - his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case), but let it sit in -next for decency sake..." * 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) aio: sanitize the limit checking in io_submit(2) aio: fold do_io_submit() into callers aio: shift copyin of iocb into io_submit_one() aio_read_events_ring(): make a bit more readable aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way aio: take list removal to (some) callers of aio_complete() aio: add missing break for the IOCB_CMD_FDSYNC case random: convert to ->poll_mask timerfd: convert to ->poll_mask eventfd: switch to ->poll_mask pipe: convert to ->poll_mask crypto: af_alg: convert to ->poll_mask net/rxrpc: convert to ->poll_mask net/iucv: convert to ->poll_mask net/phonet: convert to ->poll_mask net/nfc: convert to ->poll_mask net/caif: convert to ->poll_mask net/bluetooth: convert to ->poll_mask net/sctp: convert to ->poll_mask net/tipc: convert to ->poll_mask ...
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-13/+24
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30vhost_net: flush batched heads before trying to busy pollingJason Wang1-13/+24
After commit e2b3b35eb989 ("vhost_net: batch used ring update in rx"), we tend to batch updating used heads. But it doesn't flush batched heads before trying to do busy polling, this will cause vhost to wait for guest TX which waits for the used RX. Fixing by flush batched heads before busy loop. 1 byte TCP_RR performance recovers from 13107.83 to 50402.65. Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-26fs: add new vfs_poll and file_can_poll helpersChristoph Hellwig1-1/+1
These abstract out calls to the poll method in preparation for changes in how we poll. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-24vhost: synchronize IOTLB message with dev cleanupJason Wang1-0/+3
DaeRyong Jeong reports a race between vhost_dev_cleanup() and vhost_process_iotlb_msg(): Thread interleaving: CPU0 (vhost_process_iotlb_msg) CPU1 (vhost_dev_cleanup) (In the case of both VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE) ===== ===== vhost_umem_clean(dev->iotlb); if (!dev->iotlb) { ret = -EFAULT; break; } dev->iotlb = NULL; The reason is we don't synchronize between them, fixing by protecting vhost_process_iotlb_msg() with dev mutex. Reported-by: DaeRyong Jeong <threeearcat@gmail.com> Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24vhost_net: use packet weight for rx handler, tooPaolo Abeni1-4/+8
Similar to commit a2ac99905f1e ("vhost-net: set packet weight of tx polling to 2 * vq size"), we need a packet-based limit for handler_rx, too - elsewhere, under rx flood with small packets, tx can be delayed for a very long time, even without busypolling. The pkt limit applied to handle_rx must be the same applied by handle_tx, or we will get unfair scheduling between rx and tx. Tying such limit to the queue length makes it less effective for large queue length values and can introduce large process scheduler latencies, so a constant valued is used - likewise the existing bytes limit. The selected limit has been validated with PVP[1] performance test with different queue sizes: queue size 256 512 1024 baseline 366 354 362 weight 128 715 723 670 weight 256 740 745 733 weight 512 600 460 583 weight 1024 423 427 418 A packet weight of 256 gives peek performances in under all the tested scenarios. No measurable regression in unidirectional performance tests has been detected. [1] https://developers.redhat.com/blog/2017/06/05/measuring-and-comparing-open-vswitch-performance/ Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17tun: convert to use generic xdp_frame and xdp_return_frame APIJesper Dangaard Brouer1-3/+4
The tuntap driver invented it's own driver specific way of queuing XDP packets, by storing the xdp_buff information in the top of the XDP frame data. Convert it over to use the more generic xdp_frame structure. The main problem with the in-driver method is that the xdp_rxq_info pointer cannot be trused/used when dequeueing the frame. V3: Remove check based on feedback from Jason Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11vhost: return bool from *_access_ok() functionsStefan Hajnoczi2-35/+35
Currently vhost *_access_ok() functions return int. This is error-prone because there are two popular conventions: 1. 0 means failure, 1 means success 2. -errno means failure, 0 means success Although vhost mostly uses #1, it does not do so consistently. umem_access_ok() uses #2. This patch changes the return type from int to bool so that false means failure and true means success. This eliminates a potential source of errors. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11vhost: fix vhost_vq_access_ok() log checkStefan Hajnoczi1-3/+5
Commit d65026c6c62e7d9616c8ceb5a53b68bcdc050525 ("vhost: validate log when IOTLB is enabled") introduced a regression. The logic was originally: if (vq->iotlb) return 1; return A && B; After the patch the short-circuit logic for A was inverted: if (A || vq->iotlb) return A; return B; This patch fixes the regression by rewriting the checks in the obvious way, no longer returning A when vq->iotlb is non-NULL (which is hard to understand). Reported-by: syzbot+65a84dde0214b0387ccd@syzkaller.appspotmail.com Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-11vhost: Fix vhost_copy_to_user()Eric Auger1-1/+1
vhost_copy_to_user is used to copy vring used elements to userspace. We should use VHOST_ADDR_USED instead of VHOST_ADDR_DESC. Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache") Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+7
Pull networking fixes from David Miller: 1) The sockmap code has to free socket memory on close if there is corked data, from John Fastabend. 2) Tunnel names coming from userspace need to be length validated. From Eric Dumazet. 3) arp_filter() has to take VRFs properly into account, from Miguel Fadon Perlines. 4) Fix oops in error path of tcf_bpf_init(), from Davide Caratti. 5) Missing idr_remove() in u32_delete_key(), from Cong Wang. 6) More syzbot stuff. Several use of uninitialized value fixes all over, from Eric Dumazet. 7) Do not leak kernel memory to userspace in sctp, also from Eric Dumazet. 8) Discard frames from unused ports in DSA, from Andrew Lunn. 9) Fix DMA mapping and reset/failover problems in ibmvnic, from Thomas Falcon. 10) Do not access dp83640 PHY registers prematurely after reset, from Esben Haabendal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vhost-net: set packet weight of tx polling to 2 * vq size net: thunderx: rework mac addresses list to u64 array inetpeer: fix uninit-value in inet_getpeer dp83640: Ensure against premature access to PHY registers after reset devlink: convert occ_get op to separate registration ARM: dts: ls1021a: Specify TBIPA register address net/fsl_pq_mdio: Allow explicit speficition of TBIPA address ibmvnic: Do not reset CRQ for Mobility driver resets ibmvnic: Fix failover case for non-redundant configuration ibmvnic: Fix reset scheduler error handling ibmvnic: Zero used TX descriptor counter on reset ibmvnic: Fix DMA mapping mistakes tipc: use the right skb in tipc_sk_fill_sock_diag() sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6 net: dsa: Discard frames from unused ports sctp: do not leak kernel memory to user space soreuseport: initialise timewait reuseport field ipv4: fix uninit-value in ip_route_output_key_hash_rcu() dccp: initialize ireq->ir_mark net: fix uninit-value in __hw_addr_add_ex() ...
2018-04-09vhost-net: set packet weight of tx polling to 2 * vq sizehaibinzhang(张海斌)1-1/+7
handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy polling udp packets with small length(e.g. 1byte udp payload), because setting VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length. Ping-Latencies shown below were tested between two Virtual Machines using netperf (UDP_STREAM, len=1), and then another machine pinged the client: vq size=256 Packet-Weight Ping-Latencies(millisecond) min avg max Origin 3.319 18.489 57.303 64 1.643 2.021 2.552 128 1.825 2.600 3.224 256 1.997 2.710 4.295 512 1.860 3.171 4.631 1024 2.002 4.173 9.056 2048 2.257 5.650 9.688 4096 2.093 8.508 15.943 vq size=512 Packet-Weight Ping-Latencies(millisecond) min avg max Origin 6.537 29.177 66.245 64 2.798 3.614 4.403 128 2.861 3.820 4.775 256 3.008 4.018 4.807 512 3.254 4.523 5.824 1024 3.079 5.335 7.747 2048 3.944 8.201 12.762 4096 4.158 11.057 19.985 Seems pretty consistent, a small dip at 2 VQ sizes. Ring size is a hint from device about a burst size it can tolerate. Based on benchmarks, set the weight to 2 * vq size. To evaluate this change, another tests were done using netperf(RR, TX) between two machines with Intel(R) Xeon(R) Gold 6133 CPU @ 2.50GHz, and vq size was tweaked through qemu. Results shown below does not show obvious changes. vq size=256 TCP_RR vq size=512 TCP_RR size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 1/ 1/ -7%/ -2% 1/ 1/ 0%/ -2% 1/ 4/ +1%/ 0% 1/ 4/ +1%/ 0% 1/ 8/ +1%/ -2% 1/ 8/ 0%/ +1% 64/ 1/ -6%/ 0% 64/ 1/ +7%/ +3% 64/ 4/ 0%/ +2% 64/ 4/ -1%/ +1% 64/ 8/ 0%/ 0% 64/ 8/ -1%/ -2% 256/ 1/ -3%/ -4% 256/ 1/ -4%/ -2% 256/ 4/ +3%/ +4% 256/ 4/ +1%/ +2% 256/ 8/ +2%/ 0% 256/ 8/ +1%/ -1% vq size=256 UDP_RR vq size=512 UDP_RR size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 1/ 1/ -5%/ +1% 1/ 1/ -3%/ -2% 1/ 4/ +4%/ +1% 1/ 4/ -2%/ +2% 1/ 8/ -1%/ -1% 1/ 8/ -1%/ 0% 64/ 1/ -2%/ -3% 64/ 1/ +1%/ +1% 64/ 4/ -5%/ -1% 64/ 4/ +2%/ 0% 64/ 8/ 0%/ -1% 64/ 8/ -2%/ +1% 256/ 1/ +7%/ +1% 256/ 1/ -7%/ 0% 256/ 4/ +1%/ +1% 256/ 4/ -3%/ -4% 256/ 8/ +2%/ +2% 256/ 8/ +1%/ +1% vq size=256 TCP_STREAM vq size=512 TCP_STREAM size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize% 64/ 1/ 0%/ -3% 64/ 1/ 0%/ 0% 64/ 4/ +3%/ -1% 64/ 4/ -2%/ +4% 64/ 8/ +9%/ -4% 64/ 8/ -1%/ +2% 256/ 1/ +1%/ -4% 256/ 1/ +1%/ +1% 256/ 4/ -1%/ -1% 256/ 4/ -3%/ 0% 256/ 8/ +7%/ +5% 256/ 8/ -3%/ 0% 512/ 1/ +1%/ 0% 512/ 1/ -1%/ -1% 512/ 4/ +1%/ -1% 512/ 4/ 0%/ 0% 512/ 8/ +7%/ -5% 512/ 8/ +6%/ -1% 1024/ 1/ 0%/ -1% 1024/ 1/ 0%/ +1% 1024/ 4/ +3%/ 0% 1024/ 4/ +1%/ 0% 1024/ 8/ +8%/ +5% 1024/ 8/ -1%/ 0% 2048/ 1/ +2%/ +2% 2048/ 1/ -1%/ 0% 2048/ 4/ +1%/ 0% 2048/ 4/ 0%/ -1% 2048/ 8/ -2%/ 0% 2048/ 8/ 5%/ -1% 4096/ 1/ -2%/ 0% 4096/ 1/ -2%/ 0% 4096/ 4/ +2%/ 0% 4096/ 4/ 0%/ 0% 4096/ 8/ +9%/ -2% 4096/ 8/ -5%/ -1% Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Haibin Zhang <haibinzhang@tencent.com> Signed-off-by: Yunfang Tai <yunfangtai@tencent.com> Signed-off-by: Lidong Chen <lidongchen@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-06Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-3/+14
Pull fw_cfg, vhost updates from Michael Tsirkin: "This cleans up the qemu fw cfg device driver. On top of this, vmcore is dumped there on crash to help debugging with kASLR enabled. Also included are some fixes in vhost" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: add vsock compat ioctl vhost: fix vhost ioctl signature to build with clang fw_cfg: write vmcoreinfo details crash: export paddr_vmcoreinfo_note() fw_cfg: add DMA register fw_cfg: add a public uapi header fw_cfg: handle fw_cfg_read_blob() error fw_cfg: remove inline from fw_cfg_read_blob() fw_cfg: fix sparse warnings around FW_CFG_FILE_DIR read fw_cfg: fix sparse warning reading FW_CFG_ID fw_cfg: fix sparse warnings with fw_cfg_file fw_cfg: fix sparse warnings in fw_cfg_sel_endianness() ptr_ring: fix build
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-12/+9
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29vhost: validate log when IOTLB is enabledJason Wang1-8/+6
Vq log_base is the userspace address of bitmap which has nothing to do with IOTLB. So it needs to be validated unconditionally otherwise we may try use 0 as log_base which may lead to pin pages that will lead unexpected result (e.g trigger BUG_ON() in set_bit_to_user()). Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.