aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/video/sh_mobile_lcdcfb.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-09-15video: sh_mobile_lcdcfb: use both register sets for display panningPhil Edworthy1-3/+44
Switch to using both register sets - side A and side B for display panning. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-15video: sh_mobile_lcdcfb: implement display panningPhil Edworthy1-10/+66
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23video: Runtime PM for SuperH Mobile LCDCMagnus Damm1-46/+110
This patch modifies the SuperH Mobile LCDC framebuffer driver to support Runtime PM. The driver is using the functions - pm_runtime_get_sync() - pm_runtime_put_sync() to inform the bus code if the hardware is idle or not. If the hardware is idle then the bus code may call the runtime dev_pm_ops callbacks to save and restore state. pm_runtime_resume() is used to allow the driver to access the hardware from probe(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15Merge branch 'sh/stable-updates'Paul Mundt1-0/+5
2009-08-15sh: skip disabled LCDC channelsMagnus Damm1-0/+5
This patch updates the SuperH Mobile LCDC driver to skip over disabled channels. Without this patch suspend-to-ram operation will crash if deferred io is enabled. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07sh: 18-bit SYS panel fix for SuperH Mobile LCDCMagnus Damm1-1/+1
Fix the SuperH Mobile LCDC driver to make use of the full 18-bit DRD field in the LDDRDR register. Without this patch only 16-bit register access is possible. Needed by 18-bit SYS panels such as the one used on kfr2r09. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-07sh: LCDC SYS bus access wait fixMagnus Damm1-0/+3
Update the SuperH Mobile LCDC driver to wait for SYS bus to become idle after reading or writing. This is needed by the kfr2r09 board, but also fixes potential problems on other boards making use of the LCDC in a SYS configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11Merge branches 'sh/ftrace' and 'sh/stable-updates'Paul Mundt1-16/+24
2009-07-07video: sh_mobile_lcdcfb: Convert to framebuffer_alloc().Paul Mundt1-16/+24
All fb_info structures need to be allocated with framebuffer_alloc() due to special initialization. Switch over to it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-07video: sh_mobile_lcdcfb: depends on HAVE_CLK.Paul Mundt1-15/+1
This deifdefs the driver and adds an explicit HAVE_CLK dependency. Given that all SH platforms provide it, there is no reason to keep this as an ifdef. Other architectures that implement support for this driver will already have to provide clock framework support for timers and so on already, so adding this as an additional dependency is not terribly probematic. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-02sh: LCDC dcache flush for deferred ioPaul Mundt1-8/+45
Since writenotify on uncached vmas is unsupported in 2.6.31, live with cached framebuffer memory in the deferred io case for now and flush the dcache before forcing refresh. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Magnus damm <damm@igel.co.jp>
2009-05-22video: stop sh_mobile_lcdcfb only if startedMagnus Damm1-1/+6
This patch fixes the LCDC driver to avoid calling the function sh_mobile_lcdc_start_stop(priv, 0) unless the same function has been called before to start the LCDC hardware. Triggered when sh_mobile_lcdcfb.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits) Dynamic debug: fix pr_fmt() build error Dynamic debug: allow simple quoting of words dynamic debug: update docs dynamic debug: combine dprintk and dynamic printk sysfs: fix some bin_vm_ops errors kobject: don't block for each kobject_uevent sysfs: only allow one scheduled removal callback per kobj Driver core: Fix device_move() vs. dpm list ordering, v2 Driver core: some cleanup on drivers/base/sys.c Driver core: implement uevent suppress in kobject vcs: hook sysfs devices into object lifetime instead of "binding" driver core: fix passing platform_data driver core: move platform_data into platform_device sysfs: don't block indefinitely for unmapped files. driver core: move knode_bus into private structure driver core: move knode_driver into private structure driver core: move klist_children into private structure driver core: create a private portion of struct device driver core: remove polling for driver_probe_done(v5) sysfs: reference sysfs_dirent from sysfs inodes ... Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-24video: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-1/+1
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-16video: sh_mobile_lcdcfb suspend/resume supportMagnus Damm1-7/+59
This patch adds suspend/resume support to the LCDC driver for SuperH Mobile - sh_mobile_lcdcfb. We simply stop hardware on suspend and start it again on resume. For RGB panels this is trivial, but for SYS panels in deferred io mode this becomes a bit more difficult - we need to wait for a frame end interrupt to make sure the clocks are balanced before stopping the actual hardware. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-10video: deferred io cleanup fix for sh_mobile_lcdcfbMagnus Damm1-4/+2
Fix deferred io cleanup patch in the sh_mobile_lcdcfb driver. If probe() fails early the sh_mobile_lcdc_stop() function will be called to clean up deferred io. This patch modifies the code to only call fb_deferred_io_cleanup() after deferred io has been initialized. With this patch applied we no longer hit BUG_ON() inside fb_deferred_io_cleanup(). Triggers on a Migo-R with the SYS QVGA panel board unmounted. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22video: sh_mobile_lcdcfb deferred io supportMagnus Damm1-22/+148
This patch adds sh_mobile_lcdcfb deferred io support for SYS panels. The LCDC hardware block managed by the sh_mobile_lcdcfb driver supports RGB or SYS panel configurations. SYS panels come with an external display controller that is resposible for refreshing the actual LCD panel. RGB panels are controlled directly by the LCDC and they need to be refreshed by the LCDC hardware. In the case of SYS panels we can save some power by configuring the LCDC hardware block in one-shot mode. In this one-shot mode panel refresh is managed by software. This works well together with deferred io since it allows us to stop clocks for most of the time and only enable clocks when we actually want to trigger an update. When there is no fbdev activity the clocks are kept stopped which allows us to deep sleep. The refresh rate in deferred io mode is set using platform data. The same platform data can also be used to disable deferred io mode. As with other deferred io frame buffers user space code should use fsync() on the frame buffer device to trigger an update. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFBMagnus Damm1-3/+5
Since the sh_mobile_lcdc hardware has the framebuffer(s) in system RAM, use FB_SYS instead of FB_CFB. Also hook in read and write helpers. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: sh_mobile lcdc clock framework supportMagnus Damm1-13/+33
Add clock framework support to the lcdc driver and adjust the board specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20video: add sh_mobile_lcdc platform flagsMagnus Damm1-0/+5
Add platform data flags for detailed lcd display configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20video: remove unused sh_mobile_lcdc platform dataMagnus Damm1-1/+0
Remove lddckr from the platform data, these days we calculate the register value from clock source and clock dividers anyway. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01video: sh_mobile_lcdcfb: Support HAVE_CLK=n configurations.Paul Mundt1-1/+7
This provides a workaround for users of sh_mobile_lcdcfb that don't define HAVE_CLK and have otherwise sane clock initialization. At the same time, move the sh_mobile_lcdc.h header to include/video/. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-11video: export sh_mobile_lcdc panel sizeMagnus Damm1-0/+2
Export the LCD panel size for sh_mobile_lcdc boards. This allows us to perform dpi and screen aspect ratio calculations in user space. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-24fbdev: SuperH Mobile LCDC DriverMagnus Damm1-0/+725
This is the SuperH Mobile LCDC frame buffer driver V2, adding support for the LCDC block found in SuperH Mobile processors. The hardware supports up to two LCD panels per LCDC block, and both RGB and SYS interfaces can be used to hook up LCD panels/modules. The device driver is a regular platform driver, so LCD configuration and board specific hooks are passed to the driver using platform data. LCD modules using SYS interface often require special configuration using the SYS bus, and to solve this cleanly the driver provides SYS interface operations to the board code. Tested on sh7723 and sh7722 processors with a SYS16A QVGA panel and WVGA panels using RGB16 and RGB18 interfaces. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Paul Mundt <lethal@linux-sh.org> Reviewed-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.