aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/vme (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-05-09i40iw: Fix memory leak in error path of create QPMustafa Ismail1-1/+1
If i40iw_allocate_dma_mem fails when creating a QP, the memory allocated for the QP structure using kzalloc is not freed because iwqp->allocated_buffer is used to free the memory and it is not setup until later. Fix this by setting iwqp->allocated_buffer before allocating the dma memory. Fixes: d37498417947 ("i40iw: add files for iwarp interface") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09RDMA/mlx5: Use proper spec flow label typeDaria Velikovsky1-1/+1
Flow label is defined as u32 in the in ipv6 flow spec, but used internally in the flow specs parsing as u8. That was causing loss of part of flow_label value. Fixes: 2d1e697e9b716 ('IB/mlx5: Add support to match inner packet fields') Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Daria Velikovsky <daria@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09RDMA/mlx5: Don't assume that medium blueFlame register existsYishai Hadas1-7/+11
User can leave system without medium BlueFlames registers, however the code assumed that at least one such register exists. This patch fixes that assumption. Fixes: c1be5232d21d ("IB/mlx5: Fix micro UAR allocator") Reported-by: Rohit Zambre <rzambre@uci.edu> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09IB/hfi1: Use after free race condition in send context error pathMichael J. Ruhl1-0/+4
A pio send egress error can occur when the PSM library attempts to to send a bad packet. That issue is still being investigated. The pio error interrupt handler then attempts to progress the recovery of the errored pio send context. Code inspection reveals that the handling lacks the necessary locking if that recovery interleaves with a PSM close of the "context" object contains the pio send context. The lack of the locking can cause the recovery to access the already freed pio send context object and incorrectly deduce that the pio send context is actually a kernel pio send context as shown by the NULL deref stack below: [<ffffffff8143d78c>] _dev_info+0x6c/0x90 [<ffffffffc0613230>] sc_restart+0x70/0x1f0 [hfi1] [<ffffffff816ab124>] ? __schedule+0x424/0x9b0 [<ffffffffc06133c5>] sc_halted+0x15/0x20 [hfi1] [<ffffffff810aa3ba>] process_one_work+0x17a/0x440 [<ffffffff810ab086>] worker_thread+0x126/0x3c0 [<ffffffff810aaf60>] ? manage_workers.isra.24+0x2a0/0x2a0 [<ffffffff810b252f>] kthread+0xcf/0xe0 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 [<ffffffff816b8798>] ret_from_fork+0x58/0x90 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 This is the best case scenario and other scenarios can corrupt the already freed memory. Fix by adding the necessary locking in the pio send context error handler. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09MAINTAINERS: Remove bouncing @mellanox.com addressesLeon Romanovsky1-6/+0
Delete non-existent @mellanox.com addresses from MAINTAINERS file. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-09IB: remove redundant INFINIBAND kconfig dependenciesGreg Thelen8-8/+8
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND. Remove the unnecessary INFINIBAND depends. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03RDMA/cma: Do not query GID during QP state transition to RTRParav Pandit1-7/+0
When commit [1] was added, SGID was queried to derive the SMAC address. Then, later on during a refactor [2], SMAC was no longer needed. However, the now useless GID query remained. Then during additional code changes later on, the GID query was being done in such a way that it caused iWARP queries to start breaking. Remove the useless GID query and resolve the iWARP breakage at the same time. This is discussed in [3]. [1] commit dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") [2] commit 5c266b2304fb ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av") [3] https://www.spinics.net/lists/linux-rdma/msg63951.html Suggested-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/mlx4: Fix integer overflow when calculating optimal MTT sizeJack Morgenstein1-1/+1
When the kernel was compiled using the UBSAN option, we saw the following stack trace: [ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27 [ 1184.828114] signed integer overflow: [ 1184.828247] -2147483648 - 1 cannot be represented in type 'int' The problem was caused by calling round_up in procedure mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack trace) with the second parameter (1 << block_shift) (which is an int). The second parameter should have been (1ULL << block_shift) (which is an unsigned long long). (1 << block_shift) is treated by the compiler as an int (because 1 is an integer). Now, local variable block_shift is initialized to 31. If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-214748368. This is the most negative int value. Inside the round_up macro, there is a cast applied to ((1 << 31) - 1). However, this cast is applied AFTER ((1 << 31) - 1) is calculated. Since (1 << 31) is treated as an int, we get the negative overflow identified by UBSAN in the process of calculating ((1 << 31) - 1). The fix is to change (1 << block_shift) to (1ULL << block_shift) on line 349. Fixes: 9901abf58368 ("IB/mlx4: Use optimal numbers of MTT entries") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1: Fix memory leak in exception path in get_irq_affinity()Sebastian Sanchez1-6/+5
When IRQ affinity is set and the interrupt type is unknown, a cpu mask allocated within the function is never freed. Fix this memory leak by allocating memory within the scope where it is used. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failureSebastian Sanchez3-10/+30
When allocating device data, if there's an allocation failure, the already allocated memory won't be freed such as per-cpu counters. Fix memory leaks in exception path by creating a common reentrant clean up function hfi1_clean_devdata() to be used at driver unload time and device data allocation failure. To accomplish this, free_platform_config() and clean_up_i2c() are changed to be reentrant to remove dependencies when they are called in different order. This helps avoid NULL pointer dereferences introduced by this patch if those two functions weren't reentrant. In addition, set dd->int_counter, dd->rcv_limit, dd->send_schedule and dd->tx_opstats to NULL after they're freed in hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1: Fix NULL pointer dereference when invalid num_vls is usedSebastian Sanchez2-3/+2
When an invalid num_vls is used as a module parameter, the code execution follows an exception path where the macro dd_dev_err() expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This causes a NULL pointer dereference. Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev earlier in the code. If a dd exists, then dd->pcidev and dd->pcidev->dev always exists. BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0 IP: __dev_printk+0x15/0x90 Workqueue: events work_for_cpu_fn RIP: 0010:__dev_printk+0x15/0x90 Call Trace: dev_err+0x6c/0x90 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1] hfi1_init_dd+0xdd/0x2530 [hfi1] ? pci_conf1_read+0xb2/0xf0 ? pci_read_config_word.part.9+0x64/0x80 ? pci_conf1_write+0xb0/0xf0 ? pcie_capability_clear_and_set_word+0x57/0x80 init_one+0x141/0x490 [hfi1] local_pci_probe+0x3f/0xa0 work_for_cpu_fn+0x10/0x20 process_one_work+0x152/0x350 worker_thread+0x1cf/0x3e0 kthread+0xf5/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ? do_syscall_64+0x6e/0x1a0 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1: Fix loss of BECN with AHGMike Marciniszyn1-10/+40
AHG may be armed to use the stored header, which by design is limited to edits in the PSN/A 32 bit word (bth2). When the code is trying to send a BECN, the use of the stored header will lose the BECN bit. Fix by avoiding AHG when getting ready to send a BECN. This is accomplished by always claiming the packet is not a middle packet which is an AHG precursor. BECNs are not a normal case and this should not hurt AHG optimizations. Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1 Use correct type for num_user_contextMichael J. Ruhl1-2/+2
The module parameter num_user_context is defined as 'int' and defaults to -1. The module_param_named() says that it is uint. Correct module_param_named() type information and update the modinfo text to reflect the default value. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-03IB/hfi1: Fix handling of FECN marked multicast packetMike Marciniszyn3-10/+21
The code for handling a marked UD packet unconditionally returns the dlid in the header of the FECN marked packet. This is not correct for multicast packets where the DLID is in the multicast range. The subsequent attempt to send the CNP with the multicast lid will cause the chip to halt the ack send context because the source lid doesn't match the chip programming. The send context will be halted and flush any other pending packets in the pio ring causing the CNP to not be sent. A part of investigating the fix, it was determined that the 16B work broke the FECN routine badly with inconsistent use of 16 bit and 32 bits types for lids and pkeys. Since the port's source lid was correctly 32 bits the type mixmatches need to be dealt with at the same time as fixing the CNP header issue. Fix these issues by: - Using the ports lid for as the SLID for responding to FECN marked UD packets - Insure pkey is always 16 bit in this and subordinate routines - Insure lids are 32 bits in this and subordinate routines Cc: <stable@vger.kernel.org> # 4.14.x Fixes: 88733e3b8450 ("IB/hfi1: Add 16B UD support") Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-30IB/core: Make ib_mad_client_id atomicHåkon Bugge1-2/+2
Currently, the kernel protects access to the agent ID allocator on a per port basis using a spinlock, so it is impossible for two apps/threads on the same port to get the same TID, but it is entirely possible for two threads on different ports to end up with the same TID. As this can be confusing (regardless of it being legal according to the IB Spec 1.3, C13-18.1.1, in section 13.4.6.4 - TransactionID usage), and as the rdma-core user space API for /dev/umad devices implies unique TIDs even across ports, make the TID an atomic type so that no two allocations, regardless of port number, will be the same. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27iw_cxgb4: Atomically flush per QP HW CQEsBharat Potnuri3-4/+13
When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire corresponding QP lock before moving the CQEs into its corresponding SW queue and accessing the SQ contents for completing a WR. Ignore CQEs if corresponding QP is already flushed. Cc: stable@vger.kernel.org Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/uverbs: Fix kernel crash during MR deregistration flowAriel Levkovich2-0/+2
This patch fixes a crash that happens due to access to an uninitialized DM pointer within the MR object. The change makes sure the DM pointer in the MR object is set to NULL during a non-DM MR creation to prevent a false indication that this MR is related to a DM in the dereg flow. Fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support") Reported-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/uverbs: Prevent reregistration of DM_MR to regular MRAriel Levkovich1-0/+5
This patch adds a check in the ib_uverbs_rereg_mr flow to make sure there's no attempt to rereg a device memory MR to regular MR. In such case the command will fail with -EINVAL status. fixes: be934cca9e98 ("IB/uverbs: Add device memory registration ioctl support") Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/mlx4: Add missed RSS hash inner header flagLeon Romanovsky1-1/+2
Despite being advertised to user space application, the RSS inner header flag was filtered by checks at the beginning of QP creation routine. Cc: <stable@vger.kernel.org> # 4.15 Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions") Fixes: 07d84f7b6adf ("IB/mlx4: Add support to RSS hash for inner headers") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Fix a couple misspellingsoulijun2-2/+2
This patch fixes two spelling errors. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Submit bad wroulijun1-1/+2
When generated bad work reqeust, it needs to report to user. This patch mainly fixes it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Update assignment method for owner field of send wqeoulijun1-1/+2
When posting a work reqeust, it need to update the owner bit of send wqe. This patch mainly fix the bug when posting multiply work request. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Adjust the order of cleanup hem tableoulijun1-2/+2
This patch update the order of cleaning hem table for trrl_table and irrl_table as well as mtt_cqe_table and mtt_table. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is setoulijun1-8/+12
Only when the IB_QP_PATH_DEST_QPN flag of attr_mask is set is it valid to assign the dqpn field of qp context Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Remove some unnecessary attr_mask judgementoulijun1-7/+4
This patch deletes some unnecessary attr_mask if condition in hip08 according to the IB protocol. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is setoulijun1-1/+1
Only when the IB_QP_PATH_MTU flag of attr_mask is set it is valid to assign the mtu field of qp context when qp type is not GSI and UD. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Fix the qp context state diagramoulijun1-1/+2
According to RoCE protocol, it is possible to transition from error to error state for modifying qp in hip08. This patch fix it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Intercept illegal RDMA operation when use inline dataoulijun1-0/+5
RDMA read operation is not supported inline data. If user cofigures issue a RDMA read and use inline data, it will happen a hardware error. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/hns: Bugfix for init hem tableoulijun1-4/+4
During init hem table, type should be used instead of table->type which is finally initializaed with type. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/rxe: avoid double kfree_skbZhu Yanjun2-6/+1
When skb is sent, it will pass the following functions in soft roce. rxe_send [rdma_rxe] ip_local_out __ip_local_out ip_output ip_finish_output ip_finish_output2 dev_queue_xmit __dev_queue_xmit dev_hard_start_xmit In the above functions, if error occurs in the above functions or iptables rules drop skb after ip_local_out, kfree_skb will be called. So it is not necessary to call kfree_skb in soft roce module again. Or else crash will occur. The steps to reproduce: server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512 The kernel configs CONFIG_DEBUG_KMEMLEAK and CONFIG_DEBUG_OBJECTS are enabled on both server and client. When rping runs, run the following command in server: iptables -I OUTPUT -p udp --dport 4791 -j DROP Without this patch, crash will occur. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/rxe: add RXE_START_MASK for rxe_opcode IB_OPCODE_RC_SEND_ONLY_INVJianchao Wang1-1/+1
w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV will not be updated in update_wqe_psn, and the corresponding wqe will not be acked in rxe_completer due to its last_psn is zero. Finally, the other wqe will also not be able to be acked, because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0 is still there. This causes large amount of io timeout when nvmeof is over rxe. Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/iwpm: fix memory leak on map_infoColin Ian King1-1/+4
In the cases where iwpm_hash_bucket is NULL and where function get_mapinfo_hash_bucket returns NULL then the map_info is never added to hash_bucket_head and hence there is a leak of map_info. Fix this by nullifying hash_bucket_head and if that is null we know that that map_info was not added to hash_bucket_head and hence map_info should be free'd. Detected by CoverityScan, CID#1222481 ("Resource Leak") Fixes: 30dc5e63d6a5 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/ipoib: fix ipoib_start_xmit()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/nes: fix nes_netdev_start_xmit()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/cma: Fix use after destroy access to net namespace for IPoIBParav Pandit1-10/+43
There are few issues with validation of netdevice and listen id lookup for IB (IPoIB) while processing incoming CM request as below. 1. While performing lookup of bind_list in cma_ps_find(), net namespace of the netdevice can get deleted in cma_exit_net(), resulting in use after free access of idr and/or net namespace structures. This lookup occurs from the workqueue context (and not userspace context where net namespace is always valid). CPU0 CPU1 ==== ==== bind_list = cma_ps_find(); move netdevice to new namespace delete net namespace cma_exit_net() idr_destroy(idr); [..] cma_find_listener(bind_list, ..); 2. While netdevice is validated for IP address in given net namespace, netdevice's net namespace and/or ifindex can change in cma_get_net_dev() and cma_match_net_dev(). Above issues are overcome by using rcu lock along with netdevice UP/DOWN state as described below. When a net namespace is getting deleted, netdevice is closed and shutdown before moving it back to init_net namespace. change_net_namespace() synchronizes with any existing use of netdevice before changing the netdev properties such as net or ifindex. Once netdevice IFF_UP flags is cleared, such fields are not guaranteed to be valid. Therefore, rcu lock along with netdevice state check ensures that, while route lookup and cm_id lookup is in progress, netdevice of interest won't migrate to any other net namespace. This ensures that associated net namespace of netdevice won't get deleted while rcu lock is held for netdevice which is in IFF_UP state. Fixes: fa20105e09e9 ("IB/cma: Add support for network namespaces") Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces") Fixes: f887f2ac87c2 ("IB/cma: Validate routing of incoming requests") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/uverbs: Fix validating mandatory attributesMatan Barak1-0/+9
Previously, if a method contained mandatory attributes in a namespace that wasn't given by the user, these attributes weren't validated. Fixing this by iterating over all specification namespaces. Fixes: fac9658cabb9 ("IB/core: Add new ioctl interface") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/cxgb4: release hw resources on device removalRaju Rangoju3-3/+36
The c4iw_rdev_close() logic was not releasing all the hw resources (PBL and RQT memory) during the device removal event (driver unload / system reboot). This can cause panic in gen_pool_destroy(). The module remove function will wait for all the hw resources to be released during the device removal event. Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref) Signed-off-by: Raju Rangoju <rajur@chelsio.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB: make INFINIBAND_ADDR_TRANS configurableGreg Thelen1-1/+4
Allow INFINIBAND without INFINIBAND_ADDR_TRANS because fuzzing has been finding fair number of CM bugs. So provide option to disable it. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27ib_srp: depend on INFINIBAND_ADDR_TRANSGreg Thelen1-1/+1
INFINIBAND_SRP code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27cifs: smbd: depend on INFINIBAND_ADDR_TRANSGreg Thelen1-1/+1
CIFS_SMB_DIRECT code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27ib_srpt: depend on INFINIBAND_ADDR_TRANSGreg Thelen1-1/+1
INFINIBAND_SRPT code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27nvmet-rdma: depend on INFINIBAND_ADDR_TRANSGreg Thelen1-1/+1
NVME_TARGET_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27nvme: depend on INFINIBAND_ADDR_TRANSGreg Thelen1-1/+1
NVME_RDMA code depends on INFINIBAND_ADDR_TRANS provided symbols. So declare the kconfig dependency. This is necessary to allow for enabling INFINIBAND without INFINIBAND_ADDR_TRANS. Signed-off-by: Greg Thelen <gthelen@google.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/mlx5: Properly check return value of mlx5_get_uars_pageLeon Romanovsky1-3/+1
Starting from commit 72f36be06138 ("net/mlx5: Fix mlx5_get_uars_page to return error code") the mlx5_get_uars_page() call returns error in case of failure, but it was mistakenly overlooked in the merge commit. Fixes: e7996a9a77fc ("Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git") Reported-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/mlx5: Fix represent correct netdevice in dual port RoCEParav Pandit1-1/+1
In commit bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode") incorrectly mapped primary device's netdevice to 2nd port netdevice. It always represented primary port's netdevice for 2nd port netdevice when ib representors were not used. This results into failing to process CM request arriving on 2nd port due to incorrect mapping of netdevice. This fix corrects it by considering the right mdev. Cc: <stable@vger.kernel.org> # 4.16 Fixes: bcf87f1dbbec ("IB/mlx5: Listen to netdev register/unresiter events in switchdev mode") Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/mlx5: Use unlimited rate when static rate is not supportedDanit Goldberg1-9/+9
Before the change, if the user passed a static rate value different than zero and the FW doesn't support static rate, it would end up configuring rate of 2.5 GBps. Fix this by using rate 0; unlimited, in cases where FW doesn't support static rate configuration. Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/mlx5: Protect from shift operand overflowLeon Romanovsky1-0/+4
Ensure that user didn't supply values too large that can cause overflow. UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23 shift exponent -2147483648 is negative CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ubsan_epilogue+0xe/0x81 set_rq_size+0x7c2/0xa90 create_qp_common+0xc18/0x43c0 mlx5_ib_create_qp+0x379/0x1ca0 create_qp.isra.5+0xc94/0x2260 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0xc2c/0x1010 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 do_syscall_64+0x1aa/0x740 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x433569 RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569 RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003 RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006 Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <syzkaller@googlegroups.com> Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27RDMA/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flowLeon Romanovsky1-9/+23
Failure in rereg MR releases UMEM but leaves the MR to be destroyed by the user. As a result the following scenario may happen: "create MR -> rereg MR with failure -> call to rereg MR again" and hit "NULL-ptr deref or user memory access" errors. Ensure that rereg MR is only performed on a non-dead MR. Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.5 Fixes: 395a8e4c32ea ("IB/mlx5: Refactoring register MR code") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23IB/core: Fix deleting default GIDs when changing mac adddressParav Pandit2-25/+29
Before [1], When MAC address of the netdevice is changed, default GID is supposed to get deleted and added back which affects the node and/or port GUID in below sequence. netdevice_event() -> NETDEV_CHANGEADDR default_del_cmd() del_netdev_default_ips() bond_delete_netdev_default_gids() ib_cache_gid_set_default_gid() ib_cache_gid_del() add_cmd() [..] However, ib_cache_gid_del() was not getting invoked in non bonding scenarios because event_ndev and rdma_ndev are same. Therefore, fix such condition to ignore checking upper device when event ndev and rdma_dev are same; similar to bond_set_netdev_default_gids(). Which this fix ib_cache_gid_del() is invoked correctly; however ib_cache_gid_del() doesn't find the default GID for deletion because find_gid() was given default_gid = false with GID_ATTR_FIND_MASK_DEFAULT set. But it was getting overwritten by ib_cache_gid_set_default_gid() later on as part of add_cmd(). Therefore, mac address change used to work for default GID. With refactor series [1], this incorrect behavior is detected. Therefore, when deleting default GID, set default_gid and set MASK flag. when deleting IP based GID, clear default_gid and set MASK flag. [1] https://patchwork.kernel.org/patch/10319151/ Fixes: 238fdf48f2b5 ("IB/core: Add RoCE table bonding support") Fixes: 598ff6bae689 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-23IB/core: Fix to avoid deleting IPv6 look alike default GIDsParav Pandit1-4/+13
When IPv6 link local address is removed, if it matches with the default GID, default GID(s)s gets removed which may not be a desired behavior. This behavior is introduced by refactor work in Fixes tag. When IPv6 link address is removed, removing its equivalent RoCEv2 GID which exactly matches with default RoCEv2 GID, is right thing to do. However achieving it correctly requires lot more changes, likely in roce_gid_mgmt.c and core/cache.c. This should be done as independent patch. Therefore, this patch preserves behavior of not deleteing default GIDs. This is done by providing explicit hint to consider default GID property using mask and default_gid; similar to add_gid(). Fixes: 598ff6bae68 ("IB/core: Refactor GID modify code for RoCE") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.