aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/Kconfig (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-13watchdog: Add support for Armada 37xx CPU watchdogMarek Behún1-0/+11
This adds support for the CPU watchdog found on Marvell Armada 37xx SoCs. There are 4 counters which can be set as CPU watchdog counters. This driver uses the second counter (ID 1, counting from 0) as watchdog counter, and first counter (ID 0) to implement pinging on the second counter without the need to disable it. Since counters IDs 2 and 3 are enabled already before even U-Boot starts, this driver does not use them at all, for example by adding a device tree property for counter selection. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-10-02watchdog: lantiq: Convert to watchdog_deviceHauke Mehrtens1-0/+1
Instead of doing the ioctl handling manually just use register a watchdog_device and let the watchdog framework do the ioctl handling. This also removes the ltq_wdt_bootstatus_set typedef and replaces it with a structure providing the chip specific functions pointer. The watchdog_init_timeout() function is now used and the initial timeout can be provided in device tree. If the watchdog was already activated it will not be stopped any more, but the settings from the driver will be used and the watchdog subsystem will take care. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-06watchdog: fix dependencies of menz69_wdt.oJohannes Thumshirn1-1/+1
Currently menz69_wdt.ko has a dependency on MCB or COMPILE_TEST. But it actually needs symbols exported by MCB so the || COMPILE_TEST is wrong. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-08-02watchdog: add driver for the MEN 16z069 IP-CoreJohannes Thumshirn1-0/+10
Add a driver for the MEN 16z069 Watchdog and Reset Controller IP-Core. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Michael Moese <mmoese@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2018-04-13Merge tag 'linux-watchdog-4.17-rc1' of git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-0/+12
Pull watchdog updates from Wim Van Sebroeck: - Add Nuvoton NPCM watchdog driver - renesas_wdt: Add R-Car Gen2 support - renesas_wdt: add suspend/resume and restart handler support - hpwdt: convert to watchdog core and improve NMI - improve timeout setting/handling in various drivers - coh901327: make license text and module licence match - fix error handling in asm9260_wdt, sprd_wdt and davinci_wdt - aspeed imrovements - dw improvements (for control register & suspend/resume) - add SPDX identifiers for watchdog subsystem * tag 'linux-watchdog-4.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits) watchdog: davinci_wdt: fix error handling in davinci_wdt_probe() watchdog: add SPDX identifiers for watchdog subsystem watchdog: aspeed: Allow configuring for alternate boot watchdog: Add Nuvoton NPCM watchdog driver dt-bindings: watchdog: Add Nuvoton NPCM description watchdog: dw: save/restore control and timeout across suspend/resume watchdog: dw: RMW the control register watchdog: sprd_wdt: Fix error handling in sprd_wdt_enable() watchdog: aspeed: Fix translation of reset mode to ctrl register watchdog: renesas_wdt: Add restart handler watchdog: renesas_wdt: Add R-Car Gen2 support watchdog: renesas_wdt: Add suspend/resume support watchdog: f71808e_wdt: Fix WD_EN register read watchdog: hpwdt: Update driver version. watchdog: hpwdt: Add dynamic debug watchdog: hpwdt: Programable Pretimeout NMI watchdog: hpwdt: remove allow_kdump module parameter. watchdog: hpwdt: condition early return of NMI handler on iLO5 watchdog: hpwdt: Modify to use watchdog core. watchdog: hpwdt: Update nmi_panic message. ...
2018-04-05Merge tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds1-1/+2
Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.17 kernel cycle: New drivers: - Nintendo Wii GameCube GPIO, known as "Hollywood" - Raspberry Pi mailbox service GPIO expander - Spreadtrum main SC9860 SoC and IEC GPIO controllers. Improvements: - Implemented .get_multiple() callback for most of the high-performance industrial GPIO cards for the ISA bus. - ISA GPIO drivers now select the ISA_BUS_API instead of depending on it. This is merged with the same pattern for all the ISA drivers and some other Kconfig cleanups related to this. Cleanup: - Delete the TZ1090 GPIO drivers following the deletion of this SoC from the ARM tree. - Move the documentation over to driver-api to conform with the rest of the kernel documentation build. - Continue to make the GPIO drivers include only <linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we want to get rid of. - Managed to remove VLA allocation from two drivers pending more fixes in this area for the next merge window. - Misc janitorial fixes" * tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits) gpio: Add Spreadtrum PMIC EIC driver support gpio: Add Spreadtrum EIC driver support dt-bindings: gpio: Add Spreadtrum EIC controller documentation gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe() pinctrl: qcom: Don't allow protected pins to be requested gpiolib: Support 'gpio-reserved-ranges' property gpiolib: Change bitmap allocation to kmalloc_array gpiolib: Extract mask allocation into subroutine dt-bindings: gpio: Add a gpio-reserved-ranges property gpio: mockup: fix a potential crash when creating debugfs entries gpio: pca953x: add compatibility for pcal6524 and pcal9555a gpio: dwapb: Add support for a bus clock gpio: Remove VLA from xra1403 driver gpio: Remove VLA from MAX3191X driver gpio: ws16c48: Implement get_multiple callback gpio: gpio-mm: Implement get_multiple callback gpio: 104-idi-48: Implement get_multiple callback gpio: 104-dio-48e: Implement get_multiple callback gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks gpio: pci-idio-16: Implement get_multiple callback ...
2018-03-26watchdog: remove bfin_wdt driverArnd Bergmann1-13/+0
The blackfin architecture is getting removed, so this driver has become obsolete. Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26treewide: simplify Kconfig dependencies for removed archsArnd Bergmann1-6/+0
A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-24watchdog: Add Nuvoton NPCM watchdog driverJoel Stanley1-0/+11
The Nuvoton NPCM750 has a watchdog implemented as a single register inside the timer peripheral. This driver exposes that watchdog as a standard watchdog device with coarse timeout intervals, limited by the combination of prescaler and counter that is provided by the hardware. The calculation is taken from the Nuvoton vendor tree. The watchdog is left running if a bootloader had it going. The rate is the one specified in the device tree, or the default value (obtained from the datasheet). There is a pre-timeout IRQ that is wired up. This timeout always occurs 1024 clocks before the timeout. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-18Merge tag 'v4.16-rc5' into develLinus Walleij1-0/+4
Linux 4.16-rc5 merged into the GPIO devel branch to resolve a nasty conflict between fixes and devel in the RCAR driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-07Merge tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag into asm-genericArnd Bergmann1-1/+1
Remove metag architecture These patches remove the metag architecture and tightly dependent drivers from the kernel. With the 4.16 kernel the ancient gcc 4.2.4 based metag toolchain we have been using is hitting compiler bugs, so now seems a good time to drop it altogether. * tag 'metag_remove_2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: i2c: img-scb: Drop METAG dependency media: img-ir: Drop METAG dependency watchdog: imgpdc: Drop METAG dependency MAINTAINERS/CREDITS: Drop METAG ARCHITECTURE tty: Remove metag DA TTY and console driver clocksource: Remove metag generic timer driver irqchip: Remove metag irqchip drivers Drop a bunch of metag references docs: Remove remaining references to metag docs: Remove metag docs metag: Remove arch/metag/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-05watchdog: imgpdc: Drop METAG dependencyJames Hogan1-1/+1
Now that arch/metag/ has been removed, remove the METAG dependency from the IMG IR device driver. The hardware is also present on MIPS SoCs so the driver still has value. Signed-off-by: James Hogan <jhogan@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-metag@vger.kernel.org
2018-03-03watchdog: hpwdt: Modify to use watchdog core.Jerry Hoemann1-0/+1
Follow Documentation/watchdog/convert_drivers_to_kernel_api.txt to convert hpwdt from legacy watchdog driver to use the watchdog core. Removed functions: hpwdt_open, hpwdt_release, hpwdt_write, hpwdt_ioctl Removed data structures: hpwdt_fops, hpwdt_miscdev, watchdog_device Modified functions: hpwdt_start, hpwdt_stop, hpwdt_ping, hpwdt_gettimeleft Added functions: hpwdt_settimeout Added structures: watchdog_device Update Kconfig file to show that hpwdt now selects WATCHDOG_CORE. Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-02-22watchdog: Change ISA_BUS_API dependency to selectionWilliam Breathitt Gray1-1/+2
The ISA_BUS_API Kconfig option enables the compilation of the ISA bus driver. The ISA bus driver does not perform any hardware interaction, and is instead just a thin layer of software abstraction to eliminate boilerplate code common to ISA-style device drivers. Since ISA_BUS_API has no dependencies and does not jeopardize the integrity of the system when enabled, drivers should select it when the ISA bus driver functionality is needed. Cc: Wim Van Sebroeck <wim@iguana.be> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-19watchdog: sp5100_tco.c: fix potential build failureWim Van Sebroeck1-0/+1
isp5100_tco.c uses watchdog core functions (from watchdog_core.c) and, when compiled without CONFIG_WATCHDOG_CORE being set, it produces the following build error: ERROR: "devm_watchdog_register_device" [drivers/watchdog/sp5100_tco.ko] undefined! ERROR: "watchdog_init_timeout" [drivers/watchdog/sp5100_tco.ko] undefined! Fix this by selecting CONFIG_WATCHDOG_CORE. Fixes: 7cd9d5fff792 ("watchdog: sp5100_tco: Convert to use watchdog subsystem") Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-02-19watchdog: xen_wdt: fix potential build failureRadu Rendec1-0/+1
xen_wdt uses watchdog core functions (from watchdog_core.c) and, when compiled without CONFIG_WATCHDOG_CORE being set, it produces the following build error: ERROR: "devm_watchdog_register_device" [drivers/watchdog/xen_wdt.ko] undefined! ERROR: "watchdog_init_timeout" [drivers/watchdog/xen_wdt.ko] undefined! Fix this by selecting CONFIG_WATCHDOG_CORE when CONFIG_XEN_WDT is set. Fixes: 18cffd68e0c4 ("watchdog: xen_wdt: use the watchdog subsystem") Signed-off-by: Radu Rendec <radu.rendec@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-02-19watchdog: i6300esb: fix build failureMatteo Croce1-0/+1
i6300esb uses fuctions defined in watchdog_core.c, and when CONFIG_WATCHDOG_CORE is not set we have this build error: drivers/watchdog/i6300esb.o: In function `esb_remove': i6300esb.c:(.text+0xcc): undefined reference to `watchdog_unregister_device' drivers/watchdog/i6300esb.o: In function `esb_probe': i6300esb.c:(.text+0x2a1): undefined reference to `watchdog_init_timeout' i6300esb.c:(.text+0x388): undefined reference to `watchdog_register_device' make: *** [Makefile:1029: vmlinux] Error 1 Fix this by selecting CONFIG_WATCHDOG_CORE when I6300ESB_WDT is set. Fixes: 7af4ac8772a8f ("watchdog: i6300esb: use the watchdog subsystem") Signed-off-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-02-19watchdog: rave-sp: add NVMEM dependencyArnd Bergmann1-0/+1
We can build this driver with or without NVMEM, but not built-in when NVMEM is a loadable module: drivers/watchdog/rave-sp-wdt.o: In function `rave_sp_wdt_probe': rave-sp-wdt.c:(.text+0x27c): undefined reference to `nvmem_cell_get' rave-sp-wdt.c:(.text+0x290): undefined reference to `nvmem_cell_read' rave-sp-wdt.c:(.text+0x2c4): undefined reference to `nvmem_cell_put' This adds a Kconfig dependency to enforce that. Fixes: c3bb33345721 ("watchdog: Add RAVE SP watchdog driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-02-07Merge tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-15/+26
Pull watchdog updates from Wim Van Sebroeck: - new watchdog device drivers for Realtek RTD1295 and Spreadtrum SC9860 platform - add support for the following devices: jz4780 SoC, AST25xx series SoC and r8a77970 SoC - convert to watchdog framework: i6300esb_wdt, xen_wdt and sp5100_tco - several fixes for watchdog core - remove at32ap700x and obsolete documentation - gpio: Convert to use GPIO descriptors - rename gemini into FTWDT010 as this IP block is generc from Faraday Technology - various clean-ups and small bugfixes - add Guenter Roeck as co-maintainer - change maintainers e-mail address * tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits) documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt documentation: watchdog: remove documentation for ixp2000 documentation: watchdog: remove documentation of at32ap700x_wdt watchdog: remove at32ap700x_wdt watchdog: sp5100_tco: Add support for recent FCH versions watchdog: sp5100-tco: Abort if watchdog is disabled by hardware watchdog: sp5100_tco: Use bit operations watchdog: sp5100_tco: Convert to use watchdog subsystem watchdog: sp5100_tco: Clean up function and variable names watchdog: sp5100_tco: Use dev_ print functions where possible watchdog: sp5100_tco: Match PCI device early watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice watchdog: sp5100_tco: Use standard error codes watchdog: sp5100_tco: Use request_muxed_region where possible watchdog: sp5100_tco: Fix watchdog disable bit watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG} watchdog: core: make sure the watchdog_worker is not deferred watchdog: mt7621: switch to using managed devm_watchdog_register_device() watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate watchdog: imx2_wdt: restore previous timeout after suspend+resume ...
2018-01-21watchdog: remove at32ap700x_wdtCorentin Labbe1-9/+0
Since AVR32 is gone, this driver is useless. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-01-08watchdog: Add RAVE SP watchdog driverAndrey Smirnov1-0/+7
This driver provides access to RAVE SP watchdog functionality. Acked-by: Philippe Ombredanne <pombredanne@nexb.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-12-28watchdog: Add Spreadtrum watchdog driverEric Long1-0/+8
This patch adds the watchdog driver for Spreadtrum SC9860 platform. Signed-off-by: Eric Long <eric.long@spreadtrum.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-12-28watchdog: gemini/ftwdt010: rename driver and symbolsLinus Walleij1-6/+8
This renames all the driver files and symbols for the Gemini watchdog to FTWDT010 as it has been revealed that this IP block is a generic watchdog timer from Faraday Technology used in several SoC designs. Select this driver by default for the Gemini, it is a sensible driver to always have enabled. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-12-28watchdog: aspeed: Remove specific reference to AST2400 in KconfigAndrew Jeffery1-1/+1
The driver also supports the watchdog in the AST25xx series, and may work on earlier SoCs as well. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-12-28watchdog: aspeed: Fix 'Apseed' typo in KconfigAndrew Jeffery1-1/+1
Apseed sounds like a good name for a web/mobile start-up incubator, but isn't a reflection of Aspeed themselves. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-12-28watchdog: Add Realtek RTD1295Andreas Färber1-0/+10
Add a watchdog driver for the Realtek RTD1295 SoC. Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_watchdog.c code and mach-rtk119x/driver/dc2vo/fpga/include/iso_reg.h register defines. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-12-17watchdog: indydog: Add dependency on SGI_HAS_INDYDOGMatt Redfearn1-1/+1
Commit da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") enabled building the Indy watchdog driver when COMPILE_TEST is enabled. However, the driver makes reference to symbols that are only defined for certain platforms are selected in the config. These platforms select SGI_HAS_INDYDOG. Without this, link time errors result, for example when building a MIPS allyesconfig. drivers/watchdog/indydog.o: In function `indydog_write': indydog.c:(.text+0x18): undefined reference to `sgimc' indydog.c:(.text+0x1c): undefined reference to `sgimc' drivers/watchdog/indydog.o: In function `indydog_start': indydog.c:(.text+0x54): undefined reference to `sgimc' indydog.c:(.text+0x58): undefined reference to `sgimc' drivers/watchdog/indydog.o: In function `indydog_stop': indydog.c:(.text+0xa4): undefined reference to `sgimc' drivers/watchdog/indydog.o:indydog.c:(.text+0xa8): more undefined references to `sgimc' follow make: *** [Makefile:1005: vmlinux] Error 1 Fix this by ensuring that CONFIG_INDIDOG can only be selected when the necessary dependent platform symbols are built in. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Matt Redfearn <matt.redfearn@mips.com> Cc: <stable@vger.kernel.org> # 4.11 + Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Suggested-by: James Hogan <james.hogan@mips.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-11-09watchdog: jz4780: Allow selection of jz4740-wdt driverMathieu Malaterre1-1/+1
This driver works for jz4740 & jz4780. Suggested-by: Maarten ter Huurne <maarten@treewalker.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17251/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-07-11Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-9/+52
Pull watchdog updates from Wim Van Sebroeck: - Add Renesas RZ/A WDT Watchdog driver - STM32 Independent WatchDoG (IWDG) support - UniPhier watchdog support - Add F71868 support - Add support for NCT6793D and NCT6795D - dw_wdt: add reset lines support - core: add option to avoid early handling of watchdog - core: introduce watchdog_worker_should_ping helper - Cleanups and improvements for sama5d4, intel-mid_wdt, s3c2410_wdt, orion_wdt, gpio_wdt, it87_wdt, meson_wdt, davinci_wdt, bcm47xx_wdt, zx2967_wdt, cadence_wdt * git://www.linux-watchdog.org/linux-watchdog: (32 commits) watchdog: introduce watchdog_worker_should_ping helper watchdog: uniphier: add UniPhier watchdog driver dt-bindings: watchdog: add description for UniPhier WDT controller watchdog: cadence_wdt: make of_device_ids const. watchdog: zx2967: constify zx2967_wdt_ops. watchdog: bcm47xx_wdt: constify bcm47xx_wdt_hard_ops and bcm47xx_wdt_soft_ops watchdog: davinci: Add missing clk_disable_unprepare(). watchdog: davinci: Handle return value of clk_prepare_enable watchdog: meson: Handle return value of clk_prepare_enable watchdog: it87: Add support for various Super-IO chips watchdog: it87: Use infrastructure to stop watchdog on reboot watchdog: it87: Drop support for resetting watchdog though CIR and Game port watchdog: it87: Convert to use watchdog core infrastructure watchdog: it87: Drop FSF mailing address watchdog: dw_wdt: get reset lines from dt watchdog: bindings: dw_wdt: add reset lines watchdog: w83627hf: Add support for NCT6793D and NCT6795D watchdog: core: add option to avoid early handling of watchdog watchdog: f71808e_wdt: Add F71868 support watchdog: Add STM32 IWDG driver ...
2017-07-03watchdog: uniphier: add UniPhier watchdog driverKeiji Hayashibara1-0/+12
Add a watchdog driver for Socionext UniPhier series SoC. Note that the timeout value for this device must be a power of 2 because of the specification. Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: it87: Add support for various Super-IO chipsGuenter Roeck1-3/+4
Add support for IT8607, IT8622, IT8625, IT8628, IT8655, IT8665, and IT8686. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: it87: Drop support for resetting watchdog though CIR and Game portGuenter Roeck1-3/+0
Resetting the watchdog timer on CIR interrupts or on game port interrupts is not not supported on recent chips, and doesn't really tell if the system is stable. On top of that, at least the bit to enable resetting the watchdog through the game port is used differently on recent chips. Drop resetting the watchdog on CIR or game port interrupts to simplify the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: it87: Convert to use watchdog core infrastructureGuenter Roeck1-0/+1
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-15drivers/watchdog/Kconfig: Update CONFIG_WATCHDOG_RTAS dependenciesMurilo Opsfelder Araujo1-1/+1
drivers/watchdog/wdrtas.c uses symbols defined in arch/powerpc/kernel/rtas.c, which are exported iff CONFIG_PPC_RTAS is selected. Building wdrtas.c without setting CONFIG_PPC_RTAS throws the following errors: ERROR: ".rtas_token" [drivers/watchdog/wdrtas.ko] undefined! ERROR: "rtas_data_buf" [drivers/watchdog/wdrtas.ko] undefined! ERROR: "rtas_data_buf_lock" [drivers/watchdog/wdrtas.ko] undefined! ERROR: ".rtas_get_sensor" [drivers/watchdog/wdrtas.ko] undefined! ERROR: ".rtas_call" [drivers/watchdog/wdrtas.ko] undefined! This was identified during a randconfig build where CONFIG_WATCHDOG_RTAS=m and CONFIG_PPC_RTAS was not set. Logs are here: http://kisskb.ellerman.id.au/kisskb/buildresult/12982152/ This patch fixes the issue by updating CONFIG_WATCHDOG_RTAS to depend on just CONFIG_PPC_RTAS, removing COMPILE_TEST entirely. Signed-off-by: Murilo Opsfelder Araujo <mopsfelder@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-05watchdog: core: add option to avoid early handling of watchdogSebastian Reichel1-0/+11
On some systems its desirable to have watchdog reboot the system when it does not come up fast enough. This adds a kernel parameter to disable the auto-update of watchdog before userspace takes over and a kernel option to set the default. The info messages were added to shorten error searching on misconfigured systems. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: f71808e_wdt: Add F71868 supportMaciej S. Szmigiero1-3/+4
This adds support for watchdog part of Fintek F71868 Super I/O chip to f71808e_wdt driver. The F71868 chip is, in general, very similar to a F71869, however it has slightly different set of available reset pulse widths. Tested on MSI A55M-P33 motherboard. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: Add STM32 IWDG driverYannick Fertre1-0/+12
This patch adds IWDG (Independent WatchDoG) support for STM32 platform. Signed-off-by: Yannick FERTRE <yannick.fertre@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: add rza_wdt driverChris Brandt1-0/+8
Adds a watchdog timer driver for the Renesas RZ/A Series SoCs. A reset handler is also included since a WDT overflow is the only method for restarting an RZ/A SoC. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: orion: fix compile-test dependenciesArnd Bergmann1-1/+1
I ran into one corner case with the orion watchdog using the atomic_io_modify interface: drivers/watchdog/orion_wdt.o: In function `orion_stop': orion_wdt.c:(.text.orion_stop+0x28): undefined reference to `atomic_io_modify' drivers/watchdog/orion_wdt.o: In function `armada375_stop': orion_wdt.c:(.text.armada375_stop+0x28): undefined reference to `atomic_io_modify' This function is available on all 32-bit ARM builds except for ebsa110, so we have to specifically exclude that from compile-testing. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-03-01watchdog: retu: restore MFD dependencyArnd Bergmann1-1/+1
The retu watchdog calls into the respective mfd driver, but fails to link if that is diabled: drivers/watchdog/built-in.o: In function `retu_wdt_set_timeout': ziirave_wdt.c:(.text+0x8c88): undefined reference to `retu_write' ziirave_wdt.c:(.text+0x8c88): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write' drivers/watchdog/built-in.o: In function `retu_wdt_start': ziirave_wdt.c:(.text+0x8cc8): undefined reference to `retu_write' ziirave_wdt.c:(.text+0x8cc8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write' This restores the dependency as it was before Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: db8500: add back prmcu dependencyArnd Bergmann1-1/+1
When the db8500 watchdog is enabled without the PRCMU, we get a lot of warnings about duplicate or missing helper functions: In file included from drivers/watchdog/ux500_wdt.c:21:0: include/linux/mfd/dbx500-prcmu.h:422:19: error: redefinition of 'prcmu_abb_read' static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) This restores the dependency as it was. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: kempld: revert to full dependencyArnd Bergmann1-1/+1
The kempld watchdog driver requires the respective MFD driver: drivers/watchdog/built-in.o: In function `kempld_wdt_probe': kempld_wdt.c:(.text+0x5c78): undefined reference to `kempld_get_mutex' kempld_wdt.c:(.text+0x5c84): undefined reference to `kempld_read8' kempld_wdt.c:(.text+0x5c8e): undefined reference to `kempld_release_mutex' kempld_wdt.c:(.text+0x5d1c): undefined reference to `kempld_read8' kempld_wdt.c:(.text+0x5d2c): undefined reference to `kempld_write8' This adds the Kconfig dependency back. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: bcm2835: add CONFIG_OF dependencyArnd Bergmann1-1/+1
Without CONFIG_OF, the driver fails to link: drivers/watchdog/built-in.o: In function `bcm2835_power_off': bcm2835_wdt.c:(.text+0x1946): undefined reference to `of_find_device_by_node' This adds a new dependency, to allow the COMPILE_TEST check to succeed. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: sp805: add back AMBA dependencyArnd Bergmann1-1/+1
The driver fails to link if ARM_AMBA is disabled: drivers/watchdog/sp805_wdt.o: In function `sp805_wdt_driver_init': sp805_wdt.c:(.init.text+0x4): undefined reference to `amba_driver_register' It seems that the COMPILE_TEST was added in the wrong place, as there is no architecture dependency, but a bus dependency. This moves the dependency accordingly. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: menf21bmc: add I2C dependencyArnd Bergmann1-0/+1
This driver fails to link when CONFIG_I2C is disabled or a loadable module while the watchdog is built-in: drivers/watchdog/built-in.o: In function `menf21bmc_wdt_shutdown': menf21bmc_wdt.c:(.text+0x9b44): undefined reference to `i2c_smbus_write_word_data' menf21bmc_wdt.c:(.text+0x9b44): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `i2c_smbus_write_word_data' This adds a Kconfig dependency for it, to enforce a valid configuration. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: geode: restore hard CS5535_MFGPT dependencyArnd Bergmann1-1/+1
Wtihout CONFIG_CS5535_MFGPT, the driver does not link right: drivers/watchdog/built-in.o: In function `geodewdt_probe': geodewdt.c:(.init.text+0xca3): undefined reference to `cs5535_mfgpt_alloc_timer' geodewdt.c:(.init.text+0xcd4): undefined reference to `cs5535_mfgpt_write' geodewdt.c:(.init.text+0xcef): undefined reference to `cs5535_mfgpt_toggle_event' This adds back the dependency on this base driver. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: wm831x watchdog really needs mfdArnd Bergmann1-1/+1
The wm831x watchdog driver can now be built without the wm831x mfd driver, which results in a link error: (.text+0x1a95c): undefined reference to `wm831x_set_bits' (.text+0x1a95c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_set_bits' (.text+0x1a968): undefined reference to `wm831x_reg_lock' (.text+0x1a968): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_reg_lock' (.text+0x1a9dc): undefined reference to `wm831x_reg_unlock' (.text+0x1a9dc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_reg_unlock' This adds back the dependency that was removed. We can still build test this driver on all architectures by enabling the MFD driver for it first. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: s3c2410: Select MFD_SYSCON on all Exynos platformsKrzysztof Kozlowski1-1/+1
Syscon is used not only on Exynos5 SoCs but also on Exynos3250, Exynos4412 and ARMv8 versions (Exynos5433, Exynos7). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: softdog: make pretimeout support a compile optionWolfram Sang1-0/+8
It occurred to me that the panic pretimeout governor will stall the softdog, because it is purely software which simply breaks when the kernel panics. Testing governors with the softdog on the other hand is really useful, so make this feature a compile time option which nees to be enabled explicitly. This also removes the overhead if pretimeout support is not used because it will now be compiled away (saving ~10% on ARM32). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 familyBaoyou Xie1-0/+10
This patch adds watchdog controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.