aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/watchdog (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-03-09drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20Hawking Zhang1-2/+23
The ROMC_INDEX/DATA offset was changed to e4/e5 since from smuio_v11 (vega20/arcturus). Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Tested-by: Candice Li <Candice.Li@amd.com> Reviewed-by: Candice Li <Candice.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-09drm/amd/display: update soc bb for nv14Martin Leung1-0/+114
[why] nv14 previously inherited soc bb from generic dcn 2, did not match watermark values according to memory team [how] add nv14 specific soc bb: copy nv2 generic that it was using from before, but changed num channels to 8 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-06vgacon: Fix a UAF in vgacon_invert_regionZhang Xiaoxu1-0/+3
When syzkaller tests, there is a UAF: BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr ffff880000100000 Read of size 2 by task syz-executor.1/16489 page:ffffea0000004000 count:0 mapcount:-127 mapping: (null) index:0x0 page flags: 0xfffff00000000() page dumped because: kasan: bad access detected CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: [<ffffffffb119f309>] dump_stack+0x1e/0x20 [<ffffffffb04af957>] kasan_report+0x577/0x950 [<ffffffffb04ae652>] __asan_load2+0x62/0x80 [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110 [<ffffffffb0a39d95>] invert_screen+0xe5/0x470 [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0 [<ffffffffb0a3bfae>] tioclinux+0xee/0x490 [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670 [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10 [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40 [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170 [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27 Memory state around the buggy address: ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff It can be reproduce in the linux mainline by the program: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <linux/vt.h> struct tiocl_selection { unsigned short xs; /* X start */ unsigned short ys; /* Y start */ unsigned short xe; /* X end */ unsigned short ye; /* Y end */ unsigned short sel_mode; /* selection mode */ }; #define TIOCL_SETSEL 2 struct tiocl { unsigned char type; unsigned char pad; struct tiocl_selection sel; }; int main() { int fd = 0; const char *dev = "/dev/char/4:1"; struct vt_consize v = {0}; struct tiocl tioc = {0}; fd = open(dev, O_RDWR, 0); v.v_rows = 3346; ioctl(fd, VT_RESIZEX, &v); tioc.type = TIOCL_SETSEL; ioctl(fd, TIOCLINUX, &tioc); return 0; } When resize the screen, update the 'vc->vc_size_row' to the new_row_size, but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base' for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc the offset, it maybe larger than the vga_vram_size in vgacon driver, then bad access. Also, if set an larger screenbuf firstly, then set an more larger screenbuf, when copy old_origin to new_origin, a bad access may happen. So, If the screen size larger than vga_vram, resize screen should be failed. This alse fix CVE-2020-8649 and CVE-2020-8647. Linus pointed out that overflow checking seems absent. We're saved by the existing bounds checks in vc_do_resize() with rather strict limits: if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW) return -EINVAL; Fixes: 0aec4867dca14 ("[PATCH] SVGATextMode fix") Reference: CVE-2020-8647 and CVE-2020-8649 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> [danvet: augment commit message to point out overflow safety] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangxiaoxu5@huawei.com
2020-03-05drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2)Hersen Wu1-0/+69
This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation. For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3. boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu: smu_set_watermarks_for_clock_ranges smu_set_watermarks_table navi10_set_watermarks_table smu_write_watermarks_table For Renoir, clock settings of dcn watermark are also fixed values. dc has implemented different flow for window driver: dc_hardware_init / dc_set_power_state dcn10_init_hw notify_wm_ranges set_wm_ranges For Linux smu_set_watermarks_for_clock_ranges renoir_set_watermarks_table smu_write_watermarks_table dc_hardware_init -> amdgpu_dm_init dc_set_power_state --> dm_resume therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir. v2: add missing unlock in error case Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS casePrike Liang1-3/+3
When hit COMBINATIONAL_BYPASS the mclk will be bypass and can export fclk frequency to user usage. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-03-05drm/amd/powerplay: fix pre-check condition for setting clock rangePrike Liang2-4/+1
This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse dpm clock layout and a zero frequency dpm level as following case. cat pp_dpm_mclk 0: 1200Mhz 1: 1200Mhz 2: 800Mhz 3: 0Mhz Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-03-05drm/amd/display: fix dcc swath size calculations on dcn1Josip Pavic1-2/+2
[Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amd/display: Clear link settings on MST disable connectorBhawanpreet Lakha1-0/+1
[Why] If we have a single MST display and we disconnect it, we dont disable that link. This causes the old link settings to still exist Now on a replug for MST we think its a link loss and will try to reallocate mst payload which will fail, throwing warning below. [ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0 [ 129.374206] ------------[ cut here ]------------ [ 129.374284] WARNING: CPU: 14 PID: 1710 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153 dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci gpio_amdpt wmi gpio_generic [ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480 [ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017 [ 129.374397] Workqueue: events dm_irq_work_func [amdgpu] [ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00 00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7 [ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246 [ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000 [ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004 [ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000 [ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00 [ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006 [ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000 [ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0 [ 129.374479] Call Trace: [ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu] [ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu] [ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu] [ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu] [ 129.374774] process_one_work+0x1fd/0x3f0 [ 129.374776] worker_thread+0x255/0x410 [ 129.374778] kthread+0x121/0x140 [ 129.374780] ? process_one_work+0x3f0/0x3f0 [ 129.374781] ? kthread_park+0x90/0x90 [ 129.374785] ret_from_fork+0x22/0x40 [How] when we disable MST we should clear the cur link settings (lane_count=0 is good enough). This will cause us to not reallocate payloads earlier than expected and not throw the warning Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amdgpu: disable 3D pipe 1 on Navi1xTianci.Yin1-46/+51
[why] CP firmware decide to skip setting the state for 3D pipe 1 for Navi1x as there is no use case. [how] Disable 3D pipe 1 on Navi1x. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Tianci.Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-03-05drm/amdgpu: clean wptr on wb when gpu recoveryYintian Tao2-0/+2
The TDR will be randomly failed due to compute ring test failure. If the compute ring wptr & 0x7ff(ring_buf_mask) is 0x100 then after map mqd the compute ring rptr will be synced with 0x100. And the ring test packet size is also 0x100. Then after invocation of amdgpu_ring_commit, the cp will not really handle the packet on the ring buffer because rptr is equal to wptr. Signed-off-by: Yintian Tao <yttao@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-04drm: kirin: Revert "Fix for hikey620 display offset problem"John Stultz2-21/+0
This reverts commit ff57c6513820efe945b61863cf4a51b79f18b592. With the commit ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") we added support for handling LDI overflows by resetting the hardware. However, its been observed that when we do hit the LDI overflow condition, the irq seems to be screaming, and we do nothing but stream: [drm:ade_irq_handler [kirin_drm]] *ERROR* LDI underflow! over and over to the screen I've tried a few appraoches to avoid this, but none has yet been successful and the cure here is worse then the original disease, so revert this for now. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel <dri-devel@lists.freedesktop.org> Fixes: ff57c6513820 ("drm: kirin: Fix for hikey620 display offset problem") Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200303163228.52741-1-john.stultz@linaro.org
2020-03-04drm/i915/gt: Drop the timeline->mutex as we wait for retirementChris Wilson1-3/+11
As we have pinned the timeline (using tl->active_count), we can safely drop the tl->mutex as we wait for what we believe to be the final request on that timeline. This is useful for ensuring that we do not block the engine heartbeat by hogging the kernel_context's timeline on a dead GPU. References: https://gitlab.freedesktop.org/drm/intel/issues/1364 Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats") Fixes: f33a8a51602c ("drm/i915: Merge wait_for_timelines with retire_request") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200303140009.1494819-1-chris@chris-wilson.co.uk (cherry picked from commit 82126e596d8519baac416aee83cad938f1d23cf8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-04drm/i915/perf: Reintroduce wait on OA configuration completionChris Wilson2-18/+43
We still need to wait for the initial OA configuration to happen before we enable OA report writes to the OA buffer. Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 15d0ace1f876 ("drm/i915/perf: execute OA configuration from command stream") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1356 Testcase: igt/perf/stream-open-close Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302085812.4172450-7-chris@chris-wilson.co.uk (cherry picked from commit 4b4e973d5eb89244b67d3223b60f752d0479f253) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-03drm/sun4i: Fix DE2 VI layer format supportJernej Skrabec2-11/+67
DE2 VI layer doesn't support blending which means alpha channel is ignored. Replace all formats with alpha with "don't care" (X) channel. Fixes: 7480ba4d7571 ("drm/sun4i: Add support for DE2 VI planes") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-4-jernej.skrabec@siol.net
2020-03-03drm/sun4i: Add separate DE3 VI layer formatsJernej Skrabec3-3/+102
DE3 VI layers support alpha blending, but DE2 VI layers do not. Additionally, DE3 VI layers support 10-bit RGB and YUV formats. Make a separate list for DE3. Fixes: c50519e6db4d ("drm/sun4i: Add basic support for DE3") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-3-jernej.skrabec@siol.net
2020-03-03drm/sun4i: de2/de3: Remove unsupported VI layer formatsJernej Skrabec2-14/+0
YUV444 and YVU444 are planar formats, but HW format RGB888 is packed. This means that those two mappings were never correct. Remove them. Fixes: 60a3dcf96aa8 ("drm/sun4i: Add DE2 definitions for YUV formats") Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200224173901.174016-2-jernej.skrabec@siol.net
2020-03-02drm/i915/selftests: Fix return in assert_mmap_offset()Dan Carpenter1-1/+1
The assert_mmap_offset() returns type bool so if we return an error pointer that is "return true;" or success. If we have an error, then we should return false. Fixes: 3d81d589d6e3 ("drm/i915: Test exhaustion of the mmap space") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200228141413.qfjf4abr323drlo4@kili.mountain (cherry picked from commit efbf928824820f2738f41271934f6ec2c6ebd587) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/i915: Protect i915_request_await_start from early waitsChris Wilson1-13/+28
We need to be extremely careful inside i915_request_await_start() as it needs to walk the list of requests in the foreign timeline with very little protection. As we hold our own timeline mutex, we can not nest inside the signaler's timeline mutex, so all that remains is our RCU protection. However, to be safe we need to tell the compiler that we may be traversing the list only under RCU protection, and furthermore we need to start declaring requests as elements of the timeline from their construction. Fixes: 9ddc8ec027a3 ("drm/i915: Eliminate the trylock for awaiting an earlier request") Fixes: 6a79d848403d ("drm/i915: Lock signaler timeline while navigating") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200227085723.1961649-11-chris@chris-wilson.co.uk (cherry picked from commit d22d2d073ef859b346bc32cb25299262e3973769) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/i915/tgl: Add Wa_1608008084Lucas De Marchi1-12/+7
Wa_1608008084 is an additional WA that applies to writes on FF_MODE2 register. We can't read it back either from CPU or GPU. Since the other bits should be 0, recommendation to handle Wa_1604555607 is to actually just write the timer value. Do a write only and don't try to read it, neither before or after the WA is applied. Fixes: ff690b2111ba ("drm/i915/tgl: Implement Wa_1604555607") Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200224191258.15668-1-lucas.demarchi@intel.com (cherry picked from commit e94bda14325ccf1a519ffb516738d1201457f97f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/i915/tgl: Add Wa_22010178259:tglMatt Roper2-0/+14
We need to explicitly set the TLB Request Timer initial value in the BW_BUDDY registers to 0x8 rather than relying on the hardware default. v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct bits during the rmw. (Jose) Bspec: 52890 Bspec: 50044 Fixes: 3fa01d642fa7 ("drm/i915/tgl: Program BW_BUDDY registers during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219215655.2923650-1-matthew.d.roper@intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 87e04f75928bb5d357ef7df4eedc1a7e2761a833) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-2-matthew.d.roper@intel.com
2020-03-02drm/i915: Program MBUS with rmw during initializationMatt Roper1-5/+11
It wasn't terribly clear from the bspec's wording, but after discussion with the hardware folks, it turns out that we need to preserve the pre-existing contents of the MBUS ABOX control register when initializing a few specific bits. Bspec: 49213 Bspec: 50096 Fixes: 4cb4585e5a7f ("drm/i915/icl: initialize MBus during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200204011032.582737-1-matthew.d.roper@intel.com Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> (cherry picked from commit 837b63e6087838d0f1e612d448405419199d8033) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200228004320.127142-1-matthew.d.roper@intel.com
2020-03-02drm/i915/psr: Force PSR probe only after full initializationJosé Roberto de Souza4-5/+26
Commit 60c6a14b489b ("drm/i915/display: Force the state compute phase once to enable PSR") was forcing the state compute too earlier causing errors because not everything was initialized, so here moving to the end of i915_driver_modeset_probe() when the display is all initialized. Also fixing the place where it disarm the force probe as during the atomic check phase errors could happen like the ones due locking and it would cause PSR to never be enabled if that happens. Leaving the disarm to the atomic commit phase, intel_psr_enable() or intel_psr_update() will be called even if the current state do not allow PSR to be enabled. v2: Check if intel_dp is null in intel_psr_force_mode_changed_set() v3: Check intel_dp before get dev_priv v4: - renamed intel_psr_force_mode_changed_set() to intel_psr_set_force_mode_changed() - removed the set parameter from intel_psr_set_force_mode_changed() - not calling intel_psr_set_force_mode_changed() from intel_psr_enable/update(), directly setting it after the same checks that intel_psr_set_force_mode_changed() does - moved intel_psr_set_force_mode_changed() arm call to i915_driver_modeset_probe() as it is a better for a PSR call, all the functions calls happening between the old and the new function call will cause issue [backported to v5.6-rc3] Fixes: 60c6a14b489b ("drm/i915/display: Force the state compute phase once to enable PSR") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1151 Tested-by: Ross Zwisler <zwisler@google.com> Reported-by: Ross Zwisler <zwisler@google.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221212635.11614-1-jose.souza@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20200227205540.126135-1-jose.souza@intel.com (cherry picked from commit df1a5bfc16f3275a74f77d73375e69bc62c45c4b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/i915/gem: Break up long lists of object reclaimChris Wilson1-0/+1
Call cond_resched() between each freed object in case we have a really, really long list, and we don't want to block normal processes. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221100953.2587176-1-chris@chris-wilson.co.uk (cherry picked from commit deeee411a97559096523f97655ff16da34cf0573) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-03-02drm/shmem: drop pgprot_decrypted()Gerd Hoffmann1-1/+0
Was added by commit 95cf9264d5f3 ("x86, drm, fbdev: Do not specify encrypted memory for video mappings"), then it was kept through various changes. While vram actually needs decrypted mappings this is not correct for shmem gem objects which live in main memory not io memory, so remove the call. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200228104723.18757-1-kraxel@redhat.com
2020-03-02drm/exynos: hdmi: don't leak enable HDMI_EN regulator if probe failsMarek Szyprowski1-10/+12
Move enabling and disabling HDMI_EN optional regulator to probe() function to keep track on the regulator status. This fixes following warning if probe() fails (for example when I2C DDC adapter cannot be yet gathered due to the missing driver). This fixes following warning observed on Arndale5250 board with multi_v7_defconfig: [drm] Failed to get ddc i2c adapter by node ------------[ cut here ]------------ WARNING: CPU: 0 PID: 214 at drivers/regulator/core.c:2051 _regulator_put+0x16c/0x184 Modules linked in: ... CPU: 0 PID: 214 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219-00040-g38af1dfafdbb #7570 Hardware name: Samsung Exynos (Flattened Device Tree) [<c0312258>] (unwind_backtrace) from [<c030cc10>] (show_stack+0x10/0x14) [<c030cc10>] (show_stack) from [<c0f0d3a0>] (dump_stack+0xcc/0xe0) [<c0f0d3a0>] (dump_stack) from [<c0346a58>] (__warn+0xe0/0xf8) [<c0346a58>] (__warn) from [<c0346b20>] (warn_slowpath_fmt+0xb0/0xb8) [<c0346b20>] (warn_slowpath_fmt) from [<c0893f58>] (_regulator_put+0x16c/0x184) [<c0893f58>] (_regulator_put) from [<c0893f8c>] (regulator_put+0x1c/0x2c) [<c0893f8c>] (regulator_put) from [<c09b2664>] (release_nodes+0x17c/0x200) [<c09b2664>] (release_nodes) from [<c09aebe8>] (really_probe+0x10c/0x350) [<c09aebe8>] (really_probe) from [<c09aefa8>] (driver_probe_device+0x60/0x1a0) [<c09aefa8>] (driver_probe_device) from [<c09af288>] (device_driver_attach+0x58/0x60) [<c09af288>] (device_driver_attach) from [<c09af310>] (__driver_attach+0x80/0xbc) [<c09af310>] (__driver_attach) from [<c09ace34>] (bus_for_each_dev+0x68/0xb4) [<c09ace34>] (bus_for_each_dev) from [<c09ae00c>] (bus_add_driver+0x130/0x1e8) [<c09ae00c>] (bus_add_driver) from [<c09afd98>] (driver_register+0x78/0x110) [<c09afd98>] (driver_register) from [<bf139558>] (exynos_drm_init+0xe8/0x11c [exynosdrm]) [<bf139558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220) [<c0302fa8>] (do_one_initcall) from [<c03dc02c>] (do_init_module+0x60/0x210) [<c03dc02c>] (do_init_module) from [<c03daf44>] (load_module+0x1c0c/0x2310) [<c03daf44>] (load_module) from [<c03db85c>] (sys_finit_module+0xac/0xbc) [<c03db85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xecca3fa8 to 0xecca3ff0) ... ---[ end trace 276c91214635905c ]--- Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-03-02drm/exynos: dsi: fix workaround for the legacy clock nameMarek Szyprowski1-3/+4
Writing to the built-in strings arrays doesn't work if driver is loaded as kernel module. This is also considered as a bad pattern. Fix this by adding a call to clk_get() with legacy clock name. This fixes following kernel oops if driver is loaded as module: Unable to handle kernel paging request at virtual address bf047978 pgd = (ptrval) [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f Internal error: Oops: 80f [#1] SMP ARM Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326 videodev: Linux video capture interface: v2.00 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm] LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm] ... Process systemd-udevd (pid: 212, stack limit = 0x(ptrval)) ... [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4) [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350) [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0) [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60) [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc) [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4) [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8) [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110) [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm]) [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220) [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210) [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310) [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc) [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xd979bfa8 to 0xd979bff0) ... ---[ end trace db16efe05faab470 ]--- Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-03-02drm/exynos: dsi: propagate error value and silence meaningless warningMarek Szyprowski1-2/+3
Properly propagate error value from devm_regulator_bulk_get() and don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-03-01Linux 5.6-rc4Linus Torvalds1-1/+1
2020-03-01KVM: VMX: check descriptor table exits on instruction emulationOliver Upton1-0/+15
KVM emulates UMIP on hardware that doesn't support it by setting the 'descriptor table exiting' VM-execution control and performing instruction emulation. When running nested, this emulation is broken as KVM refuses to emulate L2 instructions by default. Correct this regression by allowing the emulation of descriptor table instructions if L1 hasn't requested 'descriptor table exiting'. Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode") Reported-by: Jan Kiszka <jan.kiszka@web.de> Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Oliver Upton <oupton@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-29ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()Dan Carpenter1-3/+3
If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes. Fixes: 7c990728b99e ("ext4: fix potential race between s_flex_groups online resizing and access") Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountain Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-29macintosh: therm_windtunnel: fix regression when instantiating devicesWolfram Sang1-21/+31
Removing attach_adapter from this driver caused a regression for at least some machines. Those machines had the sensors described in their DT, too, so they didn't need manual creation of the sensor devices. The old code worked, though, because manual creation came first. Creation of DT devices then failed later and caused error logs, but the sensors worked nonetheless because of the manually created devices. When removing attach_adaper, manual creation now comes later and loses the race. The sensor devices were already registered via DT, yet with another binding, so the driver could not be bound to it. This fix refactors the code to remove the race and only manually creates devices if there are no DT nodes present. Also, the DT binding is updated to match both, the DT and manually created devices. Because we don't know which device creation will be used at runtime, the code to start the kthread is moved to do_probe() which will be called by both methods. Fixes: 3e7bed52719d ("macintosh: therm_windtunnel: drop using attach_adapter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723 Reported-by: Erhard Furtner <erhard_f@mailbox.org> Tested-by: Erhard Furtner <erhard_f@mailbox.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org # v4.19+
2020-02-29jbd2: fix data races at struct journal_headQian Cai1-4/+4
journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pw Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-02-28kvm: x86: Limit the number of "kvm: disabled by bios" messagesErwan Velu1-2/+2
In older version of systemd(219), at boot time, udevadm is called with : /usr/bin/udevadm trigger --type=devices --action=add" This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent, leading to the "kvm: disabled by bios" message in case of your Bios disabled the virtualization extensions. On a modern system running up to 256 CPU threads, this pollutes the Kernel logs. This patch offers to ratelimit this message to avoid any userspace program triggering this uevent printing this message too often. This patch is only a workaround but greatly reduce the pollution without breaking the current behavior of printing a message if some try to instantiate KVM on a system that doesn't support it. Note that recent versions of systemd (>239) do not have trigger this behavior. This patch will be useful at least for some using older systemd with recent Kernels. Signed-off-by: Erwan Velu <e.velu@criteo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: x86: avoid useless copy of cpufreq policyPaolo Bonzini1-5/+5
struct cpufreq_policy is quite big and it is not a good idea to allocate one on the stack. Just use cpufreq_cpu_get and cpufreq_cpu_put which is even simpler. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: allow disabling -WerrorPaolo Bonzini2-1/+14
Restrict -Werror to well-tested configurations and allow disabling it via Kconfig. Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: x86: allow compiling as non-module with W=1Valdis Klētnieks2-0/+4
Compile error with CONFIG_KVM_INTEL=y and W=1: CC arch/x86/kvm/vmx/vmx.o arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=] 68 | static const struct x86_cpu_id vmx_cpu_id[] = { | ^~~~~~~~~~ cc1: all warnings being treated as errors When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a reference to the structure (or any code at all). This makes W=1 compiles unhappy. Wrap both in a #ifdef to avoid the issue. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> [Do the same for CONFIG_KVM_AMD. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipisWanpeng Li1-12/+21
Nick Desaulniers Reported: When building with: $ make CC=clang arch/x86/ CFLAGS=-Wframe-larger-than=1000 The following warning is observed: arch/x86/kernel/kvm.c:494:13: warning: stack frame size of 1064 bytes in function 'kvm_send_ipi_mask_allbutself' [-Wframe-larger-than=] static void kvm_send_ipi_mask_allbutself(const struct cpumask *mask, int vector) ^ Debugging with: https://github.com/ClangBuiltLinux/frame-larger-than via: $ python3 frame_larger_than.py arch/x86/kernel/kvm.o \ kvm_send_ipi_mask_allbutself points to the stack allocated `struct cpumask newmask` in `kvm_send_ipi_mask_allbutself`. The size of a `struct cpumask` is potentially large, as it's CONFIG_NR_CPUS divided by BITS_PER_LONG for the target architecture. CONFIG_NR_CPUS for X86_64 can be as high as 8192, making a single instance of a `struct cpumask` 1024 B. This patch fixes it by pre-allocate 1 cpumask variable per cpu and use it for both pv tlb and pv ipis.. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: Introduce pv check helpersWanpeng Li1-10/+24
Introduce some pv check helpers for consistency. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: let declaration of kvm_get_running_vcpus match implementationChristian Borntraeger1-1/+1
Sparse notices that declaration and implementation do not match: arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: warning: incorrect type in return expression (different address spaces) arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: expected struct kvm_vcpu [noderef] <asn:3> ** arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: got struct kvm_vcpu *[noderef] <asn:3> * Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-28KVM: SVM: allocate AVIC data structures based on kvm_amd module parameterPaolo Bonzini1-1/+2
Even if APICv is disabled at startup, the backing page and ir_list need to be initialized in case they are needed later. The only case in which this can be skipped is for userspace irqchip, and that must be done because avic_init_backing_page dereferences vcpu->arch.apic (which is NULL for userspace irqchip). Tested-by: rmuncrief@humanavance.com Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206579 Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-27MAINTAINERS: Correct Cadence PCI driver pathLukas Bulwahn1-1/+1
de80f95ccb9c ("PCI: cadence: Move all files to per-device cadence directory") moved files of the PCI cadence drivers, but did not update the MAINTAINERS entry. Since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches F: drivers/pci/controller/pcie-cadence* Repair the MAINTAINERS entry. Link: https://lore.kernel.org/r/20200221185402.4703-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-02-27io_uring: fix 32-bit compatability with sendmsg/recvmsgJens Axboe1-0/+10
We must set MSG_CMSG_COMPAT if we're in compatability mode, otherwise the iovec import for these commands will not do the right thing and fail the command with -EINVAL. Found by running the test suite compiled as 32-bit. Cc: stable@vger.kernel.org Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()") Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-27net: dsa: mv88e6xxx: Fix masking of egress portAndrew Lunn1-2/+2
Add missing ~ to the usage of the mask. Reported-by: Kevin Benson <Kevin.Benson@zii.aero> Reported-by: Chris Healy <Chris.Healy@zii.aero> Fixes: 5c74c54ce6ff ("net: dsa: mv88e6xxx: Split monitor port configuration") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27mlxsw: pci: Wait longer before accessing the device after resetAmit Cohen1-1/+1
During initialization the driver issues a reset to the device and waits for 100ms before checking if the firmware is ready. The waiting is necessary because before that the device is irresponsive and the first read can result in a completion timeout. While 100ms is sufficient for Spectrum-1 and Spectrum-2, it is insufficient for Spectrum-3. Fix this by increasing the timeout to 200ms. Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27sfc: fix timestamp reconstruction at 16-bit rollover pointsAlex Maftei (amaftei)1-3/+35
We can't just use the top bits of the last sync event as they could be off-by-one every 65,536 seconds, giving an error in reconstruction of 65,536 seconds. This patch uses the difference in the bottom 16 bits (mod 2^16) to calculate an offset that needs to be applied to the last sync event to get to the current time. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Acked-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27vsock: fix potential deadlock in transport->release()Stefano Garzarella3-13/+12
Some transports (hyperv, virtio) acquire the sock lock during the .release() callback. In the vsock_stream_connect() we call vsock_assign_transport(); if the socket was previously assigned to another transport, the vsk->transport->release() is called, but the sock lock is already held in the vsock_stream_connect(), causing a deadlock reported by syzbot: INFO: task syz-executor280:9768 blocked for more than 143 seconds. Not tainted 5.6.0-rc1-syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. syz-executor280 D27912 9768 9766 0x00000000 Call Trace: context_switch kernel/sched/core.c:3386 [inline] __schedule+0x934/0x1f90 kernel/sched/core.c:4082 schedule+0xdc/0x2b0 kernel/sched/core.c:4156 __lock_sock+0x165/0x290 net/core/sock.c:2413 lock_sock_nested+0xfe/0x120 net/core/sock.c:2938 virtio_transport_release+0xc4/0xd60 net/vmw_vsock/virtio_transport_common.c:832 vsock_assign_transport+0xf3/0x3b0 net/vmw_vsock/af_vsock.c:454 vsock_stream_connect+0x2b3/0xc70 net/vmw_vsock/af_vsock.c:1288 __sys_connect_file+0x161/0x1c0 net/socket.c:1857 __sys_connect+0x174/0x1b0 net/socket.c:1874 __do_sys_connect net/socket.c:1885 [inline] __se_sys_connect net/socket.c:1882 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1882 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe To avoid this issue, this patch remove the lock acquiring in the .release() callback of hyperv and virtio transports, and it holds the lock when we call vsk->transport->release() in the vsock core. Reported-by: syzbot+731710996d79d0d58fbc@syzkaller.appspotmail.com Fixes: 408624af4c89 ("vsock: use local transport when it is loaded") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27unix: It's CONFIG_PROC_FS not CONFIG_PROCFSDavid S. Miller1-1/+1
Fixes: 3a12500ed5dd ("unix: define and set show_fdinfo only if procfs is enabled") Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: fix packet forwarding in rmnet bridge modeTaehee Yoo1-0/+3
Packet forwarding is not working in rmnet bridge mode. Because when a packet is forwarded, skb_push() for an ethernet header is needed. But it doesn't call skb_push(). So, the ethernet header will be lost. Test commands: modprobe rmnet ip netns add nst ip netns add nst2 ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst2 ip link add rmnet0 link veth0 type rmnet mux_id 1 ip link set veth2 master rmnet0 ip link set veth0 up ip link set veth2 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ip netns exec nst ip link set veth1 up ip netns exec nst ip a a 192.168.100.2/24 dev veth1 ip netns exec nst2 ip link set veth3 up ip netns exec nst2 ip a a 192.168.100.3/24 dev veth3 ip netns exec nst2 ping 192.168.100.2 Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: fix bridge mode bugsTaehee Yoo4-77/+64
In order to attach a bridge interface to the rmnet interface, "master" operation is used. (e.g. ip link set dummy1 master rmnet0) But, in the rmnet_add_bridge(), which is a callback of ->ndo_add_slave() doesn't register lower interface. So, ->ndo_del_slave() doesn't work. There are other problems too. 1. It couldn't detect circular upper/lower interface relationship. 2. It couldn't prevent stack overflow because of too deep depth of upper/lower interface 3. It doesn't check the number of lower interfaces. 4. Panics because of several reasons. The root problem of these issues is actually the same. So, in this patch, these all problems will be fixed. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link add dummy1 master rmnet0 type dummy ip link add dummy2 master rmnet0 type dummy ip link del rmnet0 ip link del dummy2 ip link del dummy1 Splat looks like: [ 41.867595][ T1164] general protection fault, probably for non-canonical address 0xdffffc0000000101I [ 41.869993][ T1164] KASAN: null-ptr-deref in range [0x0000000000000808-0x000000000000080f] [ 41.872950][ T1164] CPU: 0 PID: 1164 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 41.873915][ T1164] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 41.875161][ T1164] RIP: 0010:rmnet_unregister_bridge.isra.6+0x71/0xf0 [rmnet] [ 41.876178][ T1164] Code: 48 89 ef 48 89 c6 5b 5d e9 fc fe ff ff e8 f7 f3 ff ff 48 8d b8 08 08 00 00 48 ba 00 7 [ 41.878925][ T1164] RSP: 0018:ffff8880c4d0f188 EFLAGS: 00010202 [ 41.879774][ T1164] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000101 [ 41.887689][ T1164] RDX: dffffc0000000000 RSI: ffffffffb8cf64f0 RDI: 0000000000000808 [ 41.888727][ T1164] RBP: ffff8880c40e4000 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 41.889749][ T1164] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 1ffff110189a1e3c [ 41.890783][ T1164] R13: ffff8880c4d0f200 R14: ffffffffb8d56160 R15: ffff8880ccc2c000 [ 41.891794][ T1164] FS: 00007f4300edc0c0(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 41.892953][ T1164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.893800][ T1164] CR2: 00007f43003bc8c0 CR3: 00000000ca53e001 CR4: 00000000000606f0 [ 41.894824][ T1164] Call Trace: [ 41.895274][ T1164] ? rcu_is_watching+0x2c/0x80 [ 41.895895][ T1164] rmnet_config_notify_cb+0x1f7/0x590 [rmnet] [ 41.896687][ T1164] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 41.897611][ T1164] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 41.898508][ T1164] ? __module_text_address+0x13/0x140 [ 41.899162][ T1164] notifier_call_chain+0x90/0x160 [ 41.899814][ T1164] rollback_registered_many+0x660/0xcf0 [ 41.900544][ T1164] ? netif_set_real_num_tx_queues+0x780/0x780 [ 41.901316][ T1164] ? __lock_acquire+0xdfe/0x3de0 [ 41.901958][ T1164] ? memset+0x1f/0x40 [ 41.902468][ T1164] ? __nla_validate_parse+0x98/0x1ab0 [ 41.903166][ T1164] unregister_netdevice_many.part.133+0x13/0x1b0 [ 41.903988][ T1164] rtnl_delete_link+0xbc/0x100 [ ... ] Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: use upper/lower device infrastructureTaehee Yoo1-19/+16
netdev_upper_dev_link() is useful to manage lower/upper interfaces. And this function internally validates looping, maximum depth. All or most virtual interfaces that could have a real interface (e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet1 link dummy0 type rmnet mux_id 1 for i in {2..100} do let A=$i-1 ip link add rmnet$i link rmnet$A type rmnet mux_id $i done ip link del dummy0 The purpose of the test commands is to make stack overflow. Splat looks like: [ 52.411438][ T1395] BUG: KASAN: slab-out-of-bounds in find_busiest_group+0x27e/0x2c00 [ 52.413218][ T1395] Write of size 64 at addr ffff8880c774bde0 by task ip/1395 [ 52.414841][ T1395] [ 52.430720][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 52.496511][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 52.513597][ T1395] Call Trace: [ 52.546516][ T1395] [ 52.558773][ T1395] Allocated by task 3171537984: [ 52.588290][ T1395] BUG: unable to handle page fault for address: ffffffffb999e260 [ 52.589311][ T1395] #PF: supervisor read access in kernel mode [ 52.590529][ T1395] #PF: error_code(0x0000) - not-present page [ 52.591374][ T1395] PGD d6818067 P4D d6818067 PUD d6819063 PMD 0 [ 52.592288][ T1395] Thread overran stack, or stack corrupted [ 52.604980][ T1395] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 52.605856][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 52.611764][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 52.621520][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30 [ 52.622296][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0 [ 52.627887][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006 [ 52.628735][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000 [ 52.631773][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0 [ 52.649584][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403 [ 52.674857][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0 [ 52.678257][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000 [ 52.694541][ T1395] FS: 00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 52.764039][ T1395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 52.815008][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0 [ 52.862312][ T1395] Call Trace: [ 52.887133][ T1395] Modules linked in: dummy rmnet veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_dex [ 52.936749][ T1395] CR2: ffffffffb999e260 [ 52.965695][ T1395] ---[ end trace 7e32ca99482dbb31 ]--- [ 52.966556][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30 [ 52.971083][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0 [ 53.003650][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006 [ 53.043183][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000 [ 53.076480][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0 [ 53.093858][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403 [ 53.112795][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0 [ 53.139837][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000 [ 53.141500][ T1395] FS: 00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 53.143343][ T1395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.152007][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0 [ 53.156459][ T1395] Kernel panic - not syncing: Fatal exception [ 54.213570][ T1395] Shutting down cpus with NMI [ 54.354112][ T1395] Kernel Offset: 0x33000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0x) [ 54.355687][ T1395] Rebooting in 5 seconds.. Fixes: b37f78f234bf ("net: qualcomm: rmnet: Fix crash on real dev unregistration") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.