| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
|
|
Pull watchdog updates from Wim Van Sebroeck:
- Add Toshiba Visconti watchdog driver
- it87_wdt: add IT8772 + IT8784
- several fixes and improvements
* tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add Toshiba Visconti watchdog driver
watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device
watchdog: it87_wdt: add IT8784 ID
watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled
watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3
watchdog: renesas_wdt: support handover from bootloader
watchdog: imx7ulp: Watchdog should continue running for wait/stop mode
watchdog: rti: Simplify with dev_err_probe()
watchdog: davinci: Simplify with dev_err_probe()
watchdog: cadence: Simplify with dev_err_probe()
watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h>
watchdog: Use put_device on error
watchdog: Fix memleak in watchdog_cdev_register
watchdog: imx7ulp: Strictly follow the sequence for wdog operations
watchdog: it87_wdt: add IT8772 ID
watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed
drivers: watchdog: rdc321x_wdt: Fix race condition bugs
|
|
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for initialising shared (between children) Regmaps
- Add support for Kontron SL28CPLD
- Add support for ENE KB3930 Embedded Controller
- Add support for Intel FPGA PAC MAX 10 BMC
New Device Support:
- Add support for Power to Ricoh RN5T618
- Add support for UART to Intel Lakefield
- Add support for LP87524_Q1 to Texas Instruments LP87565
New Functionality:
- Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
- Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
- Use new GPIOD API; dm355evm_msp
- Add wake-up capability; sprd-sc27xx-spi
- Add ACPI support; kempld-core
Fix-ups:
- Trivial (spelling/whitespace); Kconfig, ab8500
- Fix for unused variables; khadas-mcu, kempld-core
- Remove unused header file(s); mt6360-core
- Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
- Add COMPILE_TEST support; asic3, tmio_core
- Add dependency on I2C; SL28CPLD
Bug Fixes:
- Fix memory leak(s); sm501
- Do not free regmap_config's 'name' until exit; syscon"
* tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits)
mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI
mfd: sl28cpld: Depend on I2C
mfd: asic3: Build if COMPILE_TEST=y
dt-bindings: mfd: Correct interrupt flags in examples
mfd: Add ACPI support to Kontron PLD driver
mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC
mfd: lp87565: Add LP87524-Q1 variant
dt-bindings: mfd: Add LP87524-Q1
dt-bindings: mfd: lp87565: Convert to yaml
mfd: mt6360: Remove unused include <linux/version.h>
mfd: sm501: Fix leaks in probe()
mfd: syscon: Don't free allocated name for regmap_config
dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles
dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings
dt-bindings: mfd: ab8500: Remove weird Unicode characters
mfd: sprd: Add wakeup capability for PMIC IRQ
mfd: intel-lpss: Add device IDs for UART ports for Lakefield
mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
mfd: wcd934x: Simplify with dev_err_probe()
mfd: stmfx: Simplify with dev_err_probe()
...
|
|
Add the watchdog driver for Toshiba Visconti series.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005023012.603026-3-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
IT8784 watchdog works as in IT878x
Tested on SHAREVDY K10 board.
Signed-off-by: Hanspeter Portner <dev@open-music-kontrollers.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200904211639.18787-2-dev@open-music-kontrollers.ch
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
On Family 17h (Ryzen) devices, the WatchdogTmrEn bit of PmDecodeEn not only
enables watchdog memory decoding at 0xfeb00000, it also enables the
watchdog hardware itself. Use this information to enable the watchdog if
it is not already enabled.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20200910163109.235136-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
EFCH_PM_DECODEEN3 is supposed to access DECODEEN register bits 24..31,
in other words the register at byte offset 3.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: 887d2ec51e34b ("watchdog: sp5100_tco: Add support for recent FCH versions")
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20200910163109.235136-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Support an already running watchdog by checking its enable bit and set
up the status accordingly before registering the device.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200908095615.31376-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
When kernel idle, system will enter wait/stop mode, wdog should continue
running in this scenario, and the refresh thread can wake up system from
wait/stop mode.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1596150213-31638-2-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200901153141.18960-3-krzk@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200901153141.18960-2-krzk@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200901153141.18960-1-krzk@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
There has been no reference to "struct sched_param" since
commit 94beddacb53c ("sched,watchdog: Convert to sched_set_fifo()"), so
there's no need to include <uapi/linux/sched/types.h> any more, delete
it.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200827062154.1847-1-thunder.leizhen@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
We should use put_device() instead of freeing device
directly after device_initialize().
Fixes: cb36e29bb0e4b ("watchdog: initialize device before misc_register")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200824031230.31050-1-dinghao.liu@zju.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
When watchdog_kworker is NULL, we should free wd_data
before the function returns to prevent memleak.
Fixes: 664a39236e718 ("watchdog: Introduce hardware maximum heartbeat in watchdog core")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200824024001.25474-1-dinghao.liu@zju.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
According to reference manual, the i.MX7ULP WDOG's operations except
refresh should follow below sequence:
1. disable global interrupts;
2. unlock the wdog and wait unlock bit set;
3. reconfigure the wdog and wait for reconfiguration bit set;
4. enabel global interrupts.
Strictly follow the recommended sequence can make it more robust.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1596150213-31638-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
IT8772 watchdog works as in IT872x
Tested on SHAREVDI K6-F12 board.
Signed-off-by: Hanspeter Portner <dev@open-music-kontrollers.ch>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200827105940.2835910-1-hanspeter.portner@livesystems.ch
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
There is no need to use GFP_ATOMIC here. It is a probe function, no
spinlock is taken and GFP_KERNEL is used just before and just after this
'usb_alloc_coherent()' call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200809071912.742836-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In rdc321x_wdt_probe(), rdc321x_wdt_device.queue is initialized
after misc_register(), hence if ioctl is called before its
initialization which can call rdc321x_wdt_start() function,
it will see an uninitialized value of rdc321x_wdt_device.queue,
hence initialize it before misc_register().
Also, rdc321x_wdt_device.default_ticks is accessed in reset()
function called from write callback, thus initialize it before
misc_register().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200807112902.28764-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add support for the watchdog of the sl28cpld board management
controller. This is part of a multi-function device driver.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Samsung S3C24xx and S3C64xx machine code cleanup for v5.10
Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos. This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.
The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform. The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory. However this is step forward for multiplatform or at least
to keep this code still maintainable.
This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.
* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
ARM: s3c: Cleanup from old plat-samsung include
ARM: s3c: make headers local if possible
ARM: s3c: move into a common directory
ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
cpufreq: s3c24xx: move low-level clk reg access into platform code
cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
ARM: s3c: remove cpufreq header dependencies
cpufreq: s3c24xx: split out registers
fbdev: s3c2410fb: remove mach header dependency
ARM: s3c24xx: bast: avoid irq_desc array usage
ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
ARM: s3c24xx: include mach/irqs.h where needed
ARM: s3c24xx: move s3cmci pinctrl handling into board files
ARM: s3c24xx: move iis pinctrl config into boards
ARM: s3c24xx: move spi fiq handler into platform
ARM: s3c: adc: move header to linux/soc/samsung
ARM: s3c24xx: move irqchip driver back into platform
ARM: s3c24xx: move regs-spi.h into spi driver
ARM: s3c64xx: remove mach/hardware.h
...
Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
A separate Kconfig option HAVE_S3C2410_WATCHDOG for Samsung SoCs is not
really needed and the s3c24xx watchdog driver can depend on Samsung ARM
architectures instead.
The "HAVE_xxx_WATCHDOG" pattern of dependency is not popular and Samsung
platforms are here exceptions. All others just depend on
CONFIG_ARCH_xxx.
This makes the code slightly smaller without any change in
functionality.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
|
|
Pull watchdog updates from Wim Van Sebroeck:
- f71808e_wdt imporvements
- dw_wdt improvements
- mlx-wdt: support new watchdog type with longer timeout period
- fallthrough pseudo-keyword replacements
- overall small fixes and improvements
* tag 'linux-watchdog-5.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: (35 commits)
watchdog: rti-wdt: balance pm runtime enable calls
watchdog: rti-wdt: attach to running watchdog during probe
watchdog: add support for adjusting last known HW keepalive time
watchdog: use __watchdog_ping in startup
watchdog: softdog: Add options 'soft_reboot_cmd' and 'soft_active_on_boot'
watchdog: pcwd_usb: remove needless check before usb_free_coherent()
watchdog: Replace HTTP links with HTTPS ones
dt-bindings: watchdog: renesas,wdt: Document r8a774e1 support
watchdog: initialize device before misc_register
watchdog: booke_wdt: Add common nowayout parameter driver
watchdog: scx200_wdt: Use fallthrough pseudo-keyword
watchdog: Use fallthrough pseudo-keyword
watchdog: f71808e_wdt: do stricter parameter validation
watchdog: f71808e_wdt: clear watchdog timeout occurred flag
watchdog: f71808e_wdt: remove use of wrong watchdog_info option
watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options
docs: watchdog: codify ident.options as superset of possible status flags
dt-bindings: watchdog: Add compatible for QCS404, SC7180, SDM845, SM8150
dt-bindings: watchdog: Convert QCOM watchdog timer bindings to YAML
watchdog: dw_wdt: Add DebugFS files
...
|
|
PM runtime should be disabled in the fail path of probe and when
the driver is removed.
Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200717132958.14304-5-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
If the RTI watchdog is running already during probe, the driver must
configure itself to match the HW. Window size and timeout is probed from
hardware, and the last keepalive ping is adjusted to match it also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200717132958.14304-4-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Certain watchdogs require the watchdog only to be pinged within a
specific time window, pinging too early or too late cause the watchdog
to fire. In cases where this sort of watchdog has been started before
kernel comes up, we must adjust the watchdog keepalive window to match
the actually running timer, so add a new driver API for this purpose.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200717132958.14304-3-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Current watchdog startup functionality does not respect the minimum hw
heartbeat setup and the last watchdog ping timeframe when watchdog is
already running and userspace process attaches to it. Fix this by using
the __watchdog_ping from the startup also. For this code path, we can
also let the __watchdog_ping handle the bookkeeping for the worker and
last keepalive times.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200717132958.14304-2-t-kristo@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add module parameters 'soft_reboot_cmd' and 'soft_active_on_boot' for
customizing softdog configuration; config reboot command by assigning
soft_reboot_cmd, and set soft_active_on_boot to start up softdog
timer at module initialization stage.
Signed-off-by: Woody Lin <woodylin@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200708083218.3157213-1-woodylin@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
usb_free_coherent() is safe with NULL usb_pcwd->intr_buffer and
this check is not required.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200713055348.21620-1-vulab@iscas.ac.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200713205821.38223-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
When watchdog device is being registered, it calls misc_register that
makes watchdog available for systemd to open. This is a data race
scenario, because when device is open it may still have device struct
not initialized - this in turn causes a crash. This patch moves
device initialization before misc_register call and it solves the
problem printed below.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54
kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called.
Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6
CPU: 3 PID: 1 Comm: systemd Tainted: G O 4.19.113-g2579778-fsm4_k2 #1
Hardware name: Keystone
[<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c)
[<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8)
[<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114)
[<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74)
[<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54)
[<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24)
[<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0)
[<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c)
[<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8)
[<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc)
[<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148)
[<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec)
[<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4)
[<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd2ceffa8 to 0xd2cefff0)
ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000
ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78
ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6
---[ end trace 7b16eb105513974f ]---
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54
refcount_t: increment on 0; use-after-free.
Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6
CPU: 3 PID: 1 Comm: systemd Tainted: G W O 4.19.113-g2579778-fsm4_k2 #1
Hardware name: Keystone
[<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c)
[<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8)
[<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114)
[<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74)
[<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54)
[<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24)
[<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0)
[<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c)
[<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8)
[<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc)
[<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148)
[<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec)
[<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4)
[<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd2ceffa8 to 0xd2cefff0)
ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000
ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78
ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6
---[ end trace 7b16eb1055139750 ]---
Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Krzysztof Sobota <krzysztof.sobota@nokia.com>
Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add the common "nowayout" parameter to booke_wdt to make this behavior
selectable at runtime and to make the implementation more consistent with
many other watchdog drivers.
Signed-off-by: Timothy Myers <timothy.myers@adtran.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
[groeck: Dropped version data, cleaned up subject line]
Link: https://lore.kernel.org/r/CH2PR19MB359059AA5C8917D8D24633FF9D690@CH2PR19MB3590.namprd19.prod.outlook.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].
[1] https://www.kernel.org/doc/html/v5.7-rc7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200717164059.GA26947@embeddedor
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200707171121.GA13472@embeddedor
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
We check the f71862fg_pin module parameter every time a watchdog device
for the f71862fg is opened, but the parameter can't change at runtime.
If we move the check to the start of init:
- We catch userspace passing invalid, but unused, values
- We check the condition only once
- We simplify the code
Do so.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-6-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The flag indicating a watchdog timeout having occurred normally persists
till Power-On Reset of the Fintek Super I/O chip. The user can clear it
by writing a `1' to the bit.
The driver doesn't offer a restart method, so regular system reboot
might not reset the Super I/O and if the watchdog isn't enabled, we
won't touch the register containing the bit on the next boot.
In this case all subsequent regular reboots will be wrongly flagged
by the driver as being caused by the watchdog.
Fix this by having the flag cleared after read. This is also done by
other drivers like those for the i6300esb and mpc8xxx_wdt.
Fixes: b97cb21a4634 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-5-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The flags that should be or-ed into the watchdog_info.options by drivers
all start with WDIOF_, e.g. WDIOF_SETTIMEOUT, which indicates that the
driver's watchdog_ops has a usable set_timeout.
WDIOC_SETTIMEOUT was used instead, which expands to 0xc0045706, which
equals:
WDIOF_FANFAULT | WDIOF_EXTERN1 | WDIOF_PRETIMEOUT | WDIOF_ALARMONLY |
WDIOF_MAGICCLOSE | 0xc0045000
These were so far indicated to userspace on WDIOC_GETSUPPORT.
As the driver has not yet been migrated to the new watchdog kernel API,
the constant can just be dropped without substitute.
Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-4-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The driver supports populating bootstatus with WDIOF_CARDRESET, but so
far userspace couldn't portably determine whether absence of this flag
meant no watchdog reset or no driver support. Or-in the bit to fix this.
Fixes: b97cb21a4634 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200611191750.28096-3-a.fatoum@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
For the sake of the easier device-driver debug procedure, we added a
DebugFS file with the controller registers state. It's available only if
kernel is configured with DebugFS support.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200530073557.22661-8-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
DW Watchdog can rise an interrupt in case if IRQ request mode is enabled
and timer reaches the zero value. In this case the IRQ lane is left
pending until either the next watchdog kick event (watchdog restart) or
until the WDT_EOI register is read or the device/system reset. This
interface can be used to implement the pre-timeout functionality
optionally provided by the Linux kernel watchdog devices.
IRQ mode provides a two stages timeout interface. It means the IRQ is
raised when the counter reaches zero, while the system reset occurs only
after subsequent timeout if the timer restart is not performed. Due to
this peculiarity the pre-timeout value is actually set to the achieved
hardware timeout, while the real watchdog timeout is considered to be
twice as much of it. This applies a significant limitation on the
pre-timeout values, so current implementation supports either zero value,
which disables the pre-timeout events, or non-zero values, which imply
the pre-timeout to be at least half of the current watchdog timeout.
Note that we ask the interrupt controller to detect the rising-edge
pre-timeout interrupts to prevent the high-level-IRQs flood, since
if the pre-timeout happens, the IRQ lane will be left pending until
it's cleared by the timer restart.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200530073557.22661-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
DW Watchdog IP core can be synthesised with asynchronous timer/APB
clocks support (WDT_ASYNC_CLK_MODE_ENABLE == 1). In this case
separate clock signals are supposed to be used to feed watchdog timer
and APB interface of the device. Currently the driver supports
the synchronous mode only. Since there is no way to determine which
mode was actually activated for device from its registers, we have to
rely on the platform device configuration data. If optional "pclk"
clock source is supplied, we consider the device working in asynchronous
mode, otherwise the driver falls back to the synchronous configuration.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200530073557.22661-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
In case if the DW Watchdog IP core is synthesised with
WDT_USE_FIX_TOP == false, the TOP interval indexes make the device
to load a custom periods to the counter. These periods are hardwired
at the IP synthesis stage and can be within [2^8, 2^(WDT_CNT_WIDTH - 1)].
Alas their values can't be detected at runtime and must be somehow
supplied to the driver so one could properly determine the watchdog
timeout intervals. For this purpose we suggest to have a vendor-
specific dts property "snps,watchdog-tops" utilized, which would
provide an array of sixteen counter values. At device probe stage they
will be used to initialize the watchdog device timeouts determined
from the array values and current clocks source rate.
In order to have custom TOP values supported the driver must be
altered in the following way. First of all the fixed-top values
ready-to-use array must be determined for compatibility with currently
supported devices, which were synthesised with WDT_USE_FIX_TOP == true.
It will be used if either fixed TOP feature is detected being enabled or
no custom TOPs are fetched from the device dt node. Secondly at the probe
stage we must initialize an array of the watchdog timeouts corresponding
to the detected TOPs list and the reference clock rate. For generality the
procedure of initialization is designed in a way to support the TOPs array
with no limitations on the items order or value. Finally the watchdog
period search methods should be altered to support the new timeouts data
structure.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200530073557.22661-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use kobj_to_dev() API instead of container_of().
Signed-off-by: Wang Qing <wangqing@vivo.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1591945384-14587-1-git-send-email-wangqing@vivo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1590391864-308-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
sunxi_wdt_probe() should return -ENOMEM when devm_kzalloc() fails.
Signed-off-by: Martin Wu <wuyan@allwinnertech.com>
Signed-off-by: Frank Lee <frank@allwinnertech.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200529094514.26374-1-frank@allwinnertech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Use the dedicated function watchdog_active()
instead of the generic test_bit() function.
It is done using the following Coccinelle script:
@@
identifier wdd;
@@
- test_bit(WDOG_ACTIVE, &wdd->status)
+ watchdog_active(wdd)
Signed-off-by: Bumsik Kim <k.bumsik@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200529012428.84684-1-k.bumsik@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
New programmable logic device can have watchdog type 3 implementation.
It's same as Type 2 with extended maximum timeout period.
Maximum timeout is up-to 65535 sec.
Type 3 HW watchdog implementation can exist on all Mellanox systems.
It is differentiated by WD capability bit.
Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Reviewed-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200504141427.17685-4-michaelsh@mellanox.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Because SCHED_FIFO is a broken scheduler model (see previous patches)
take away the priority field, the kernel can't possibly make an
informed decision.
Effectively changes prio from 99 to 50.
Cc: wim@linux-watchdog.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
Linus Torvalds
Nobuhiro Iwamatsu
Hanspeter Portner
Guenter Roeck
Wolfram Sang
Anson Huang
Krzysztof Kozlowski
Zhen Lei
Dinghao Liu
Hanspeter Portner
Christophe JAILLET
Madhuparna Bhowmik
Michael Walle
Olof Johansson
Gustavo A. R. Silva
Tero Kristo
Woody Lin
Xu Wang
Alexander A. Klimov
Krzysztof Sobota
Timothy Myers
Ahmad Fatoum
Serge Semin
Wang Qing
Tiezhu Yang
Martin Wu
Bumsik Kim
Michael Shych
Peter Zijlstra
Masahiro Yamada