aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/watchdog (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-05-19watchdog: bcm281xx: Fix use of uninitialized spinlock.Eric Anholt1-1/+2
The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so initialize it earlier. Fixes a warning at boot with lock debugging enabled. Fixes: 6adb730dc208 ("watchdog: bcm281xx: Watchdog Driver") Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19watchdog: zx2967: remove redundant dev_err call in zx2967_wdt_probe()Wei Yongjun1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19iTCO_wdt: all versions count down twicePaolo Bonzini1-12/+10
The ICH9 is listed as having TCO v2, and indeed the behavior in the datasheet corresponds to v2 (for example the NO_REBOOT flag is accessible via the 16KiB-aligned Root Complex Base Address). However, the TCO counts twice just like in v1; the documentation of the SECOND_TO_STS bit says: "ICH9 sets this bit to 1 to indicate that the TIMEOUT bit had been (or is currently) set and a second timeout occurred before the TCO_RLD register was written. If this bit is set and the NO_REBOOT config bit is 0, then the ICH9 will reboot the system after the second timeout. The same can be found in the BayTrail (Atom E3800) datasheet, and even HOWTOs around the Internet say that it will reboot after _twice_ the specified heartbeat. I did not find the Apollo Lake datasheet, but because v4/v5 has a SECOND_TO_STS bit just like the previous version I'm enabling this for Apollo Lake as well. Cc: linux-watchdog@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: wdt_pci: fix build error if define SOFTWARE_REBOOTShile Zhang1-1/+1
To fix following build error when SOFTWARE_REBOOT is defined: CC [M] driver/watchdog/wdt_pci.o driver/watchdog/wdt_pci.c: In function 'wdtpci_interrupt': driver/watchdog/wdt_pci.c:335:3: error: too many arguments to function 'emergency_restart' emergency_restart(NULL); ^ In file included from driver/watchdog/wdt_pci.c:51:0: include/linux/reboot.h:80:13: note: declared here extern void emergency_restart(void); ^ Signed-off-by: Shile Zhang <shile.zhang@nokia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: cadence_wdt: fix timeout settingTomas Melin1-1/+1
wdt_timeout must not be initialized to CDNS_WDT_DEFAULT_TIMEOUT in order to allow the value to be overriddden by a device tree setting. This way, the default timeout value will be used only in case module_param has not been set, or device tree timeout-sec has not been defined. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: pcwd_usb: fix NULL-deref at probeJohan Hovold1-0/+3
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: sama5d4: fix race conditionAlexandre Belloni1-4/+29
WDT_MR and WDT_CR must not updated within three slow clock periods after the last ping (write to WDT_CR or WDT_MR). Ensure enough time has elapsed before writing those registers. wdt_write() waits for 4 periods to ensure at least 3 edges are seen by the IP. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou.Yang <wenyou.yang@microchip.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: sama5d4: fix WDDIS handlingAlexandre Belloni1-18/+30
The datasheet states: "When setting the WDDIS bit, and while it is set, the fields WDV and WDD must not be modified." Because the whole configuration is already cached inside .mr, wait for the user to enable the watchdog to configure it so it is enabled and configured at the same time (what the IP is actually expecting). When the watchdog is already enabled, it is not an issue to reconfigure it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou.Yang <wenyou.yang@microchip.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: orion: fix compile-test dependenciesArnd Bergmann1-1/+1
I ran into one corner case with the orion watchdog using the atomic_io_modify interface: drivers/watchdog/orion_wdt.o: In function `orion_stop': orion_wdt.c:(.text.orion_stop+0x28): undefined reference to `atomic_io_modify' drivers/watchdog/orion_wdt.o: In function `armada375_stop': orion_wdt.c:(.text.armada375_stop+0x28): undefined reference to `atomic_io_modify' This function is available on all 32-bit ARM builds except for ebsa110, so we have to specifically exclude that from compile-testing. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-10Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds5-7/+7
Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...
2017-05-08drivers/watchdog/hpwdt.c: use set_memory.h headerLaura Abbott1-1/+1
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-10-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-28watchdog: iTCO_wdt: Add PMC specific noreboot update apiKuppuswamy Sathyanarayanan1-7/+18
In some SoCs, setting noreboot bit needs modification to PMC GC registers. But not all PMC drivers allow other drivers to memory map their GC region. This could create mem request conflict in watchdog driver. So this patch adds facility to allow PMC drivers to pass noreboot update function to watchdog drivers via platform data. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-04-28watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functionsKuppuswamy Sathyanarayanan1-33/+50
iTCO_wdt no_reboot_bit set/unset functions has lot of common code between them. So merging these two functions into a single update function would remove these unnecessary code duplications. This patch fixes this issue by creating a no_reboot_bit update function to handle both set/unset functions. Also checking for iTCO version every time you make no_reboot_bit set/unset call is inefficient and makes the code look complex. This can be improved by performing this check once during device probe and selecting the appropriate no_reboot_bit update function. This patch fixes this issue by splitting the update function into multiple helper functions. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-04-20Annotate hardware config module parameters in drivers/watchdog/David Howells5-7/+7
When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/watchdog/. Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> cc: Wim Van Sebroeck <wim@iguana.be> cc: Zwane Mwaikambo <zwanem@gmail.com> cc: linux-watchdog@vger.kernel.org
2017-03-01watchdog: retu: restore MFD dependencyArnd Bergmann1-1/+1
The retu watchdog calls into the respective mfd driver, but fails to link if that is diabled: drivers/watchdog/built-in.o: In function `retu_wdt_set_timeout': ziirave_wdt.c:(.text+0x8c88): undefined reference to `retu_write' ziirave_wdt.c:(.text+0x8c88): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write' drivers/watchdog/built-in.o: In function `retu_wdt_start': ziirave_wdt.c:(.text+0x8cc8): undefined reference to `retu_write' ziirave_wdt.c:(.text+0x8cc8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write' This restores the dependency as it was before Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: db8500: add back prmcu dependencyArnd Bergmann1-1/+1
When the db8500 watchdog is enabled without the PRCMU, we get a lot of warnings about duplicate or missing helper functions: In file included from drivers/watchdog/ux500_wdt.c:21:0: include/linux/mfd/dbx500-prcmu.h:422:19: error: redefinition of 'prcmu_abb_read' static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) This restores the dependency as it was. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: kempld: fix gcc-4.3 buildArnd Bergmann1-1/+8
gcc-4.3 can't decide whether the constant value in kempld_prescaler[PRESCALER_21] is built-time constant or not, and gets confused by the logic in do_div(): drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout': kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod' This adds a call to ACCESS_ONCE() to force it to not consider it to be constant, and leaves the more efficient normal case in place for modern compilers, using an #ifdef to annotate why we do this hack. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: softdog: fire watchdog even if softirqs do not get to runNiklas Cassel1-17/+27
Checking for timer expiration is done from the softirq TIMER_SOFTIRQ. Since commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), pending softirqs are no longer always handled immediately, instead, if there are pending softirqs, and ksoftirqd is in state TASK_RUNNING, the handling of the softirqs are deferred, and are instead supposed to be handled by ksoftirqd, when ksoftirqd gets scheduled. If a user space process with a real-time policy starts to misbehave by never relinquishing the CPU while ksoftirqd is in state TASK_RUNNING, what will happen is that all softirqs will get deferred, while ksoftirqd, which is supposed to handle the deferred softirqs, will never get to run. To make sure that the watchdog is able to fire even when we do not get to run softirqs, replace the timers with hrtimers. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: kempld: revert to full dependencyArnd Bergmann1-1/+1
The kempld watchdog driver requires the respective MFD driver: drivers/watchdog/built-in.o: In function `kempld_wdt_probe': kempld_wdt.c:(.text+0x5c78): undefined reference to `kempld_get_mutex' kempld_wdt.c:(.text+0x5c84): undefined reference to `kempld_read8' kempld_wdt.c:(.text+0x5c8e): undefined reference to `kempld_release_mutex' kempld_wdt.c:(.text+0x5d1c): undefined reference to `kempld_read8' kempld_wdt.c:(.text+0x5d2c): undefined reference to `kempld_write8' This adds the Kconfig dependency back. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: bcm2835: add CONFIG_OF dependencyArnd Bergmann1-1/+1
Without CONFIG_OF, the driver fails to link: drivers/watchdog/built-in.o: In function `bcm2835_power_off': bcm2835_wdt.c:(.text+0x1946): undefined reference to `of_find_device_by_node' This adds a new dependency, to allow the COMPILE_TEST check to succeed. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: sp805: add back AMBA dependencyArnd Bergmann1-1/+1
The driver fails to link if ARM_AMBA is disabled: drivers/watchdog/sp805_wdt.o: In function `sp805_wdt_driver_init': sp805_wdt.c:(.init.text+0x4): undefined reference to `amba_driver_register' It seems that the COMPILE_TEST was added in the wrong place, as there is no architecture dependency, but a bus dependency. This moves the dependency accordingly. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: menf21bmc: add I2C dependencyArnd Bergmann1-0/+1
This driver fails to link when CONFIG_I2C is disabled or a loadable module while the watchdog is built-in: drivers/watchdog/built-in.o: In function `menf21bmc_wdt_shutdown': menf21bmc_wdt.c:(.text+0x9b44): undefined reference to `i2c_smbus_write_word_data' menf21bmc_wdt.c:(.text+0x9b44): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `i2c_smbus_write_word_data' This adds a Kconfig dependency for it, to enforce a valid configuration. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: geode: restore hard CS5535_MFGPT dependencyArnd Bergmann1-1/+1
Wtihout CONFIG_CS5535_MFGPT, the driver does not link right: drivers/watchdog/built-in.o: In function `geodewdt_probe': geodewdt.c:(.init.text+0xca3): undefined reference to `cs5535_mfgpt_alloc_timer' geodewdt.c:(.init.text+0xcd4): undefined reference to `cs5535_mfgpt_write' geodewdt.c:(.init.text+0xcef): undefined reference to `cs5535_mfgpt_toggle_event' This adds back the dependency on this base driver. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: wm831x watchdog really needs mfdArnd Bergmann1-1/+1
The wm831x watchdog driver can now be built without the wm831x mfd driver, which results in a link error: (.text+0x1a95c): undefined reference to `wm831x_set_bits' (.text+0x1a95c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_set_bits' (.text+0x1a968): undefined reference to `wm831x_reg_lock' (.text+0x1a968): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_reg_lock' (.text+0x1a9dc): undefined reference to `wm831x_reg_unlock' (.text+0x1a9dc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `wm831x_reg_unlock' This adds back the dependency that was removed. We can still build test this driver on all architectures by enabling the MFD driver for it first. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-27scripts/spelling.txt: add "partiton" pattern and fix typo instancesMasahiro Yamada1-3/+3
Fix typos and add the following to the scripts/spelling.txt: partiton||partition Link: http://lkml.kernel.org/r/1481573103-11329-7-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24watchdog: s3c2410: Add prefix to local functionKrzysztof Kozlowski1-3/+2
Functions marked static inline might not be inlined so a driver-specific prefix for function name helps when looking through call backtrace. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: s3c2410: Select MFD_SYSCON on all Exynos platformsKrzysztof Kozlowski1-1/+1
Syscon is used not only on Exynos5 SoCs but also on Exynos3250, Exynos4412 and ARMv8 versions (Exynos5433, Exynos7). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: s3c2410: Use dev_dbg instead of pr_infoKrzysztof Kozlowski1-23/+6
Replace the 'debug' module parameter and pr_info() with proper device dynamic debug calls because this is the preferred and flexible way of enabling debugging printks. Also remove some obvious debug printks. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: s3c2410: Fix infinite interrupt in soft modeKrzysztof Kozlowski1-3/+18
In soft (no-reboot) mode, the driver self-pings watchdog upon expiration of an interrupt. However the interrupt itself was not cleared thus on first hit, the system enters infinite interrupt handling loop. On Odroid U3 (Exynos4412), when booted with s3c2410_wdt.soft_noboot=1 argument the console is flooded: # killall -9 watchdog [ 60.523760] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq) [ 60.536744] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq) Fix this by writing something to the WTCLRINT register to clear the interrupt. The register WTCLRINT however appeared in S3C6410 so a new watchdog quirk and flavor are needed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: s3c2410: Remove confusing CONFIG prefix from local definesKrzysztof Kozlowski1-8/+8
The CONFIG prefix from defines in the s3c2410_wdt.c might suggest that these constants come from Kconfig. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: softdog: make pretimeout support a compile optionWolfram Sang2-8/+21
It occurred to me that the panic pretimeout governor will stall the softdog, because it is purely software which simply breaks when the kernel panics. Testing governors with the softdog on the other hand is really useful, so make this feature a compile time option which nees to be enabled explicitly. This also removes the overhead if pretimeout support is not used because it will now be compiled away (saving ~10% on ARM32). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 familyBaoyou Xie3-0/+302
This patch adds watchdog controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: sama5d4: Implement resume hookAlexandre Belloni1-0/+17
When resuming for the deepest state on sama5d2, it is necessary to restore MR as the registers are lost. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: sama5d4: Cache MR instead of a partial configAlexandre Belloni1-26/+19
.config is used to cache a part of WDT_MR at probe time and is not used afterwards. Instead of doing that, actually cache MR and avoid reading it every time it is modified. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: ts72xx_wdt: convert driver to watchdog coreH Hartley Sweeten1-358/+89
Cleanup this driver and convert it to use the watchdog framework API. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> [groeck: Dropped initialization of static variable] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: ep93xx_wdt: cleanup and let the core handle the heartbeatH Hartley Sweeten1-70/+44
Cleanup this driver and remove the 200ms heartbeat timer. The core now has the ability to handle the heartbeat. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> [groeck: Dropped 0-initialization of static variable] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: RDC321X_WDT always depends on PCIGuenter Roeck1-0/+1
Without this dependency, platforms not supporting PCI (such as m68k) report the following build warning when building allmodconfig or allyesconfig. drivers/watchdog/rdc321x_wdt.c: In function 'rdc321x_wdt_ioctl': ./arch/m68k/include/asm/uaccess_mm.h:61:1: warning: 'value' may be used uninitialized in this function Fixes: f4c3de659054 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: add driver for Cortina Gemini watchdogLinus Walleij3-0/+241
This add support for the Cortina systems Gemini (SL3516) SoC watchdog. I have tried to use all the right new kernel interfaces and tested with busybox' "watchdog" command both to kick and get timeouts and reboots. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: constify watchdog_ops structuresBhumika Goyal14-14/+14
Declare watchdog_ops structures as const as they are only stored in the ops field of a watchdog_device structure. This field is of type const, so watchdog_ops structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct watchdog_ops x@p={...}; @ok@ struct watchdog_device w; identifier r.x; position p; @@ w.ops=&x@p; @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct watchdog_ops x; File size details before and after patching. First line of every .o file shows the file size before patching and second line shows the size after patching. text data bss dec hex filename 1340 544 0 1884 75c drivers/watchdog/bcm_kona_wdt.o 1436 440 0 1876 754 drivers/watchdog/bcm_kona_wdt.o 1176 544 4 1724 6bc drivers/watchdog/digicolor_wdt.o 1272 440 4 1716 6b4 drivers/watchdog/digicolor_wdt.o 925 580 89 1594 63a drivers/watchdog/ep93xx_wdt.o 1021 476 89 1586 632 drivers/watchdog/ep93xx_wdt.o 4932 288 17 5237 1475 drivers/watchdog/s3c2410_wdt.o 5028 192 17 5237 1475 drivers/watchdog/s3c2410_wdt.o 1977 292 1 2270 8de drivers/watchdog/sama5d4_wdt.o 2073 196 1 2270 8de drivers/watchdog/sama5d4_wdt.o 1375 484 1 1860 744 drivers/watchdog/sirfsoc_wdt.o 1471 380 1 1852 73c drivers/watchdog/sirfsoc_wdt.o Size remains the same for the files drivers/watchdog/diag288_wdt.o drivers/watchdog/asm9260_wdt.o and drivers/watchdog/atlas7_wdt.o The following .o files did not compile: drivers/watchdog/sun4v_wdt.o, drivers/watchdog/sbsa_gwdt.o, drivers/watchdog/rt2880_wdt.o, drivers/watchdog/booke_wdt.o drivers/watchdog/mt7621_wdt.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: Introduce watchdog_stop_on_unregister helperGuenter Roeck1-0/+5
Many watchdog drivers explicitly stop the watchdog when unregistering it. While it is unclear if this is actually needed (the whatdog should not be running at that time if it can be stopped), introduce a helper to explicitly stop the watchdog in the watchdog core when unregistering it. This helps reducing driver code size while retaining functionality. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: ebc-c384_wdt: Utilize devm_ functions in driver probe callbackWilliam Breathitt Gray1-13/+1
The devm_ resource manager functions allow memory to be automatically released when a device is unbound. This patch takes advantage of the resource manager functions and replaces the watchdog_register_device call with the devm_watchdog_register_device call. In addition, the ebc_c384_wdt_remove function has been removed as no longer necessary due to the use of the relevant devm_ resource manager functions. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: tegra_wdt: Convert to use device managed functionsGuenter Roeck1-3/+1
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Use devm_watchdog_register_driver() to register watchdog device Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: da9063_wdt: Convert to use device managed functionsGuenter Roeck1-17/+1
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Replace 'val = e; return val;' with 'return e;' - Replace 'if (e) return e; return 0;' with 'return e;' - Drop assignments to otherwise unused variables - Drop unused variables - Drop remove function - Drop dev_set_drvdata() - Use devm_watchdog_register_driver() to register watchdog device Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: da9062_wdt: Convert to use device managed functionsGuenter Roeck1-16/+2
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Replace 'val = e; return val;' with 'return e;' - Drop assignments to otherwise unused variables - Drop remove function - Drop dev_set_drvdata() - Use devm_watchdog_register_driver() to register watchdog device Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: da9055_wdt: Convert to use device managed functionsGuenter Roeck1-15/+2
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Replace 'goto l; ... l: return e;' with 'return e;' - Drop assignments to otherwise unused variables - Drop remove function - Drop platform_set_drvdata() - Use devm_watchdog_register_driver() to register watchdog device Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: da9052_wdt: Convert to use device managed functionsGuenter Roeck1-24/+8
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Replace 'goto l; ... l: return e;' with 'return e;' - Replace 'val = e; return val;' with 'return e;' - Drop assignments to otherwise unused variables - Replace 'if (e) { return expr; }' with 'if (e) return expr;' - Drop remove function - Drop platform_set_drvdata() - Use devm_watchdog_register_driver() to register watchdog device Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: bcm2835_wdt: Convert to use device managed functions and other improvementsGuenter Roeck1-19/+8
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Replace of_iomap() with platform_get_resource() followed by devm_ioremap_resource() - Replace &pdev->dev with dev if 'struct device *dev' is a declared variable - Use devm_watchdog_register_driver() to register watchdog device - Replace shutdown function with call to watchdog_stop_on_reboot() Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: mena21_wdt: Convert to use device managed functions and other improvementsGuenter Roeck1-22/+2
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Replace 'goto l; ... l: return e;' with 'return e;' - Drop assignments to otherwise unused variables - Drop remove function - Drop unnecessary mutex_destroy() on allocated data - Use devm_watchdog_register_driver() to register watchdog device Acked-by: Johannes Thumshirn <morbidrsa@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: wm831x_wdt: Convert to use device managed functionsGuenter Roeck1-24/+7
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Replace 'goto l; ... l: return e;' with 'return e;' - Replace 'val = e; return val;' with 'return e;' - Drop assignments to otherwise unused variables - Replace 'if (e) { return expr; }' with 'if (e) return expr;' - Drop remove function - Drop platform_set_drvdata() - Use devm_watchdog_register_driver() to register watchdog device Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24watchdog: digicolor_wdt: Convert to use device managed functions and other improvementsGuenter Roeck1-36/+12
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. Other improvements as listed below. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Replace 'goto l; ... l: return e;' with 'return e;' - Replace 'val = e; return val;' with 'return e;' - Drop assignments to otherwise unused variables - Replace 'if (e) { return expr; }' with 'if (e) return expr;' - Drop remove function - Replace of_iomap() with platform_get_resource() followed by devm_ioremap_resource() - Drop platform_set_drvdata() - Replace &pdev->dev with dev if 'struct device *dev' is a declared variable - Use devm_watchdog_register_driver() to register watchdog device - Replace shutdown function with call to watchdog_stop_on_reboot() Acked-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.