aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/watchdog (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-06-21Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds3-2/+322
Pull s390 patches from Martin Schwidefsky: "A couple of bug fixes, a debug change for qdio, an update for the default config, and one small extension. The watchdog module based on diagnose 0x288 is converted to the watchdog API and it now works under LPAR as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ccwgroup: use ccwgroup_ungroup wrapper s390/ccwgroup: fix an uninitialized return code s390/ccwgroup: obtain extra reference for asynchronous processing qdio: Keep device-specific dbf entries s390/compat: correct ucontext layout for high gprs s390/cio: set device name as early as possible s390: update default configuration s390: avoid format strings leaking into names s390/airq: silence lockdep warning s390/watchdog: add support for LPAR operation (diag288) s390/watchdog: use watchdog API s390/sclp_vt220: Enable ASCII console per default s390/qdio: replace shift loop by ilog2 s390/cio: silence lockdep warning s390/uaccess: always load the kernel ASCE after task switch s390/ap_bus: Make modules parameters visible in sysfs
2014-06-10watchdog: add Intel MID watchdog driver supportDavid Cohen3-0/+198
Add initial Intel MID watchdog driver support. This driver is an initial implementation of generic Intel MID watchdog driver. Currently it supports Intel Merrifield platform. Signed-off-by: Eric Ernst <eric.ernst@intel.com> Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()Viresh Kumar1-3/+1
Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct watchdog_device' passed to it. sp805 was rather setting this in a local variable. Fix it. Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: <stable@vger.kernel.org> # 2.6.36+
2014-06-10booke/watchdog: refine and clean up the codesTang Yuantian1-18/+33
Basically, this patch does the following: 1. Move the codes of parsing boot parameters from setup-common.c to driver. In this way, code reader can know directly that there are boot parameters that can change the timeout. 2. Make boot parameter 'booke_wdt_period' effective. currently, when driver is loaded, default timeout is always being used in stead of booke_wdt_period. 3. Wrap up the watchdog timeout in device struct and clean up unnecessary codes. Signed-off-by: Tang Yuantian <yuantian.tang@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Li Yang <leoli@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: iop_wdt only builds for mach-iop13xxArnd Bergmann1-1/+1
All three iop variants we support in Linux (iop32x, iop33x and iop13xx) seem to have support for the watchdog hardware, but this driver fails to build for the first two of these because it uses the IOP13XX_WDTCR_IB_RESET macro that is only defined for iop13xx. This clarifies the dependency in Kconfig to avoid randconfig build errors. It is unlikely that anyone will ever miss support for this driver on the ancient iop3xx platforms, so we don't need to bother trying to fix it properly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2014-06-10watchdog: Remove drivers for W83697HF and W83697UGGuenter Roeck4-889/+0
Since both chips are now supported by the w83627hf watchdog driver, the chip specific drivers are no longer needed and can be removed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: w83627hf_wdt: Add early_disable module parameterGuenter Roeck1-3/+12
Add early_disable module parameter to match functionality previously available in the w83697hf_wdt driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Add Armada 375/380 SoC supportEzequiel Garcia1-0/+103
This commit adds support for the Armada 375 and Armada 380 SoCs. This SoC variant has a second RSTOUT register, in addition to the already existent, which is shared with the system-controller. To handle this RSTOUT, we introduce a new MMIO register 'rstout_mask' to be required on 'armada-{375,380}-watchdog' new compatible string. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce per-SoC enabled() functionEzequiel Garcia1-2/+13
In order to support other SoCs, it's needed to have a different enabled() implementation for each SoC. This commit adds no functionality, and it consists of preparation work. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce per-SoC stop() functionEzequiel Garcia1-1/+28
In order to support other SoCs, it's needed to have a different stop() implementation for each SoC. This commit adds no functionality, and it consists of preparation work. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Remove unneeded atomic accessEzequiel Garcia1-2/+5
The RSTOUT register on the Armada 370 SoC variant is a dedicated register (not shared across orthogonal subsystems) and so it's not needed to write it atomically. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Introduce a SoC-specific RSTOUT mappingEzequiel Garcia1-7/+20
Separate the RSTOUT register mapping for the different compatible strings supported by the driver. This allows to use devm_ioremap on SoC variants that share the RSTOUT register, and devm_ioremap_resource (which requests the MMIO region) on SoCs that have a dedicated RSTOUT register. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: orion: Move the register ioremap'ing to its own functionEzequiel Garcia1-14/+24
Follow-up patches will extend the registers ioremap and request to handle SoC-specific quirks on the RSTOUT register. Therefore, in order to keep the code readable, this commit introduces a special function for this. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: xilinx: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: convert to watchdog core apiAnatolij Gustschin2-170/+123
Convert the imx2_wdt driver to the new watchdog core api. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: convert to use regmap API.Xiubo Li2-18/+33
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ IMX2+ LE LE Vybird LE LE LS1 LE BE LS2 LE LE Other possible SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ Soc1 BE BE Soc2 BE LE And also the watchdog's registers will be 32-bits for some versions, and though it is 16-bits in IMX2+, Vybird and LS+. Using the regmap APIs, could be more easy to support different endianness and also more easy to support 32-bits version... Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: Sort the header files alphabeticallyXiubo Li1-6/+6
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: ath79_wdt: switch to clk_prepare/clk_disableGabor Juhos1-3/+3
Replace clk_enable() and clk_disable() calls with clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: ath79_wdt: avoid spurious restarts on AR934xGabor Juhos1-0/+10
On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: <stable@vger.kernel.org>
2014-06-10watchdog: shwdt: Remove unused platform_set_drvdata()Alexander Shiyan1-2/+0
This patch removes platform_set_drvdata() which is not used in the driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: kempld-wdt: Use the correct value when configuring the prescaler with the watchdoggundberg1-1/+1
Use the prescaler index, rather than its value, to configure the watchdog. This will prevent a mismatch with the prescaler used to calculate the cycles. Signed-off-by: Per Gundberg <per.gundberg@icomera.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Michael Brunner <michael.brunner@kontron.com> Tested-by: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
2014-06-10watchdog: sunxi: Fix compilation with C=2Emilio López1-11/+11
When compiling sunxi_defconfig while using C=2, the following error causes the compilation to fail: drivers/watchdog/sunxi_wdt.c:60:15: error: constant 0b0001 is not a valid number Fix it by using hex notation instead of the non-standard binary one Signed-off-by: Emilio Lopez <emilio@elopez.com.ar> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: via_wdt: replace del_timer by del_timer_syncJulia Lawall1-1/+1
Use del_timer_sync to ensure that the timer is stopped on all CPUs before the driver exits. This change was suggested by Thomas Gleixner. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier i,t,ex; @@ struct t i = { .remove = ex, }; @@ identifier r.ex; @@ ex(...) { <... - del_timer + del_timer_sync (...) ...> } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: Fix SBC8360 dependenciesJean Delvare1-1/+1
According to its Kconfig help text, the sbc8360 watchdog driver is only used on the Axiomtek SBC8360 single-board computer. This piece of hardware is 32-bit x86 so the driver is useless beyond X86_32. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10s390/watchdog: add support for LPAR operation (diag288)Philipp Hachtmann2-4/+35
Add the LPAR variant of the diag 288 watchdog to the driver. The only available action on timeout for LPAR is a PSW restart. Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10s390/watchdog: use watchdog APIPhilipp Hachtmann3-2/+291
Converted the vmwatchdog driver to use the kernel's watchdog API. Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-07Merge tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-2/+9
Pull CPU hotplug notifiers registration fixes from Rafael Wysocki: "The purpose of this single series of commits from Srivatsa S Bhat (with a small piece from Gautham R Shenoy) touching multiple subsystems that use CPU hotplug notifiers is to provide a way to register them that will not lead to deadlocks with CPU online/offline operations as described in the changelog of commit 93ae4f978ca7f ("CPU hotplug: Provide lockless versions of callback registration functions"). The first three commits in the series introduce the API and document it and the rest simply goes through the users of CPU hotplug notifiers and converts them to using the new method" * tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) net/iucv/iucv.c: Fix CPU hotplug callback registration net/core/flow.c: Fix CPU hotplug callback registration mm, zswap: Fix CPU hotplug callback registration mm, vmstat: Fix CPU hotplug callback registration profile: Fix CPU hotplug callback registration trace, ring-buffer: Fix CPU hotplug callback registration xen, balloon: Fix CPU hotplug callback registration hwmon, via-cputemp: Fix CPU hotplug callback registration hwmon, coretemp: Fix CPU hotplug callback registration thermal, x86-pkg-temp: Fix CPU hotplug callback registration octeon, watchdog: Fix CPU hotplug callback registration oprofile, nmi-timer: Fix CPU hotplug callback registration intel-idle: Fix CPU hotplug callback registration clocksource, dummy-timer: Fix CPU hotplug callback registration drivers/base/topology.c: Fix CPU hotplug callback registration acpi-cpufreq: Fix CPU hotplug callback registration zsmalloc: Fix CPU hotplug callback registration scsi, fcoe: Fix CPU hotplug callback registration scsi, bnx2fc: Fix CPU hotplug callback registration scsi, bnx2i: Fix CPU hotplug callback registration ...
2014-04-07Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds1-55/+82
Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...
2014-04-05Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-80/+303
Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-02Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds1-8/+0
Pull main powerpc updates from Ben Herrenschmidt: "This time around, the powerpc merges are going to be a little bit more complicated than usual. This is the main pull request with most of the work for this merge window. I will describe it a bit more further down. There is some additional cpuidle driver work, however I haven't included it in this tree as it depends on some work in tip/timer-core which Thomas accidentally forgot to put in a topic branch. Since I didn't want to carry all of that tip timer stuff in powerpc -next, I setup a separate branch on top of Thomas tree with just that cpuidle driver in it, and Stephen has been carrying that in next separately for a while now. I'll send a separate pull request for it. Additionally, two new pieces in this tree add users for a sysfs API that Tejun and Greg have been deprecating in drivers-core-next. Thankfully Greg reverted the patch that removes the old API so this merge can happen cleanly, but once merged, I will send a patch adjusting our new code to the new API so that Greg can send you the removal patch. Now as for the content of this branch, we have a lot of perf work for power8 new counters including support for our new "nest" counters (also called 24x7) under pHyp (not natively yet). We have new functionality when running under the OPAL firmware (non-virtualized or KVM host), such as access to the firmware error logs and service processor dumps, system parameters and sensors, along with a hwmon driver for the latter. There's also a bunch of bug fixes accross the board, some LE fixes, and a nice set of selftests for validating our various types of copy loops. On the Freescale side, we see mostly new chip/board revisions, some clock updates, better support for machine checks and debug exceptions, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits) powerpc/book3s: Fix CFAR clobbering issue in machine check handler. powerpc/compat: 32-bit little endian machine name is ppcle, not ppc powerpc/le: Big endian arguments for ppc_rtas() powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) powerpc/defconfigs: Enable THP in pseries defconfig powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split powerpc: Rate-limit users spamming kernel log buffer powerpc/perf: Fix handling of L3 events with bank == 1 powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes powerpc/perf: Add kconfig option for hypervisor provided counters powerpc/perf: Add support for the hv 24x7 interface powerpc/perf: Add support for the hv gpci (get performance counter info) interface powerpc/perf: Add macros for defining event fields & formats powerpc/perf: Add a shared interface to get gpci version and capabilities powerpc/perf: Add 24x7 interface headers powerpc/perf: Add hv_gpci interface header powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info) sysfs: create bin_attributes under the requested group powerpc/perf: Enable BHRB access for EBB events powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB ...
2014-03-31watchdog: Fix Elan SC520 dependenciesJean Delvare1-1/+1
Anyone using a system based on an AMD Elan SC520 processor would be building a dedicated kernel for it, so we can make the sc520_wdt driver depend on MELAN. SC520_CPUFREQ already depends on MELAN so it makes things more consistent. It also makes kernel configuration for every other x86 user easier. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: ib700wdt: Use platform_driver_probeJean Delvare1-12/+9
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: geodewdt: Use platform_driver_probeJean Delvare1-10/+7
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: advantechwdt: Use platform_driver_probeJean Delvare1-12/+9
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: acquirewdt: Use platform_driver_probeJean Delvare1-12/+9
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: iTCO_wdt: Fix the parent deviceJean Delvare1-1/+1
The watchdog's parent is iTCO_wdt (the platform device) not lpc_ich (the PCI device.) Setting the parent right makes it much easier for the user to figure out which driver/module is handling the watchdog device node. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: it87_wdt: Work around non-working CIR interruptsMarc van der Wal1-10/+31
On some hardware platforms, the it87_wdt watchdog resets the machine despite the watchdog daemon running and writing to /dev/watchdog. This is due to Consumer IR buffer underrun interrupts being used as triggers to reset the timer. On some buggy hardware implementations such as the iEi AFL-12A-N270 single-board computer, this method does not work. However, resetting the timer by writing its original timeout value in its configuration register over and over again suppresses the unwanted reboots. Add a module option (nocir), 0 by default in order not to break existing setups. Setting it to 1 enables the workaround. Fixes bug #42801 <https://bugzilla.kernel.org/show_bug.cgi?id=42801>. Tested primarily on Linux 3.5.7, applies cleanly on Linux 3.13.5. Signed-off-by: Marc van der Wal <x0r+kernel@x0r.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: bcm281xx: Fix Kconfig dependencyMarkus Mayer1-1/+1
Use more the applicable ARCH_BCM_MOBILE option instead of ARCH_BCM as dependency for bcm_kona_wdt.c. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: s3c2410_wdt: Check return value of clk_prepare_enableSachin Kamat1-1/+5
clk_prepare_enable can fail. Check its return value. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: s3c2410_wdt: Remove unneeded initializationSachin Kamat1-2/+0
Initializing clk to NULL as a reset/error condition does not help as NULL is not an invalid condition w.r.t clk. Remove this initialization altogether as there is no state retention. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: sunxi: Change compatiblesMaxime Ripard1-1/+1
The Allwinner A10 and A31 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Change the compatibles to match the other pattern in the watchdog controller driver for consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: orion: prepare new Dove DT Kconfig variableSebastian Hesselbarth1-1/+1
DT-enabled Dove will move over from ARCH_DOVE in mach-dove to MACH_DOVE in mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new DT-only MACH_DOVE Kconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: fix checkpatch warnings and errorJingoo Han6-14/+13
Fix the following checkpatch warnings and error: WARNING: quoted string split across lines WARNING: braces {} are not necessary for single statement blocks WARNING: __initdata should be placed after ibmasr_id_table[] WARNING: please, no space before tabs ERROR: do not initialise statics to 0 or NULL Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: Add tegra watchdogAndrew Chew3-0/+314
Add a driver for the hardware watchdogs in NVIDIA Tegra SoCs (Tegra30 and later). This driver will configure one watchdog timer that will reset the system in the case of a watchdog timeout. This driver binds to the nvidia,tegra30-timer device node and gets its register base from there. Signed-off-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Remove no_timeout variableMichal Simek1-9/+4
Remove no_timeout variable and check variables directly. Suggested-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Enable this driver for ZynqMichal Simek1-13/+9
Enable this driver for Zynq. Move it to architecture independent Kconfig part. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Use correct comment indentationMichal Simek1-4/+4
No functional changes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Use of_property_read_u32Michal Simek1-17/+12
Use of_property_read_u32 functions to clean probe function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Fix all printk messagesMichal Simek1-8/+8
Use dev_ functions for printk messages. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Allocate private structure per deviceMichal Simek1-42/+55
Only one watchdog could be used by this driver. Create driver private data structure and move there all variables for one instance. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.