aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/watchdog (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-07-11Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds20-645/+1003
Pull watchdog updates from Wim Van Sebroeck: - Add Renesas RZ/A WDT Watchdog driver - STM32 Independent WatchDoG (IWDG) support - UniPhier watchdog support - Add F71868 support - Add support for NCT6793D and NCT6795D - dw_wdt: add reset lines support - core: add option to avoid early handling of watchdog - core: introduce watchdog_worker_should_ping helper - Cleanups and improvements for sama5d4, intel-mid_wdt, s3c2410_wdt, orion_wdt, gpio_wdt, it87_wdt, meson_wdt, davinci_wdt, bcm47xx_wdt, zx2967_wdt, cadence_wdt * git://www.linux-watchdog.org/linux-watchdog: (32 commits) watchdog: introduce watchdog_worker_should_ping helper watchdog: uniphier: add UniPhier watchdog driver dt-bindings: watchdog: add description for UniPhier WDT controller watchdog: cadence_wdt: make of_device_ids const. watchdog: zx2967: constify zx2967_wdt_ops. watchdog: bcm47xx_wdt: constify bcm47xx_wdt_hard_ops and bcm47xx_wdt_soft_ops watchdog: davinci: Add missing clk_disable_unprepare(). watchdog: davinci: Handle return value of clk_prepare_enable watchdog: meson: Handle return value of clk_prepare_enable watchdog: it87: Add support for various Super-IO chips watchdog: it87: Use infrastructure to stop watchdog on reboot watchdog: it87: Drop support for resetting watchdog though CIR and Game port watchdog: it87: Convert to use watchdog core infrastructure watchdog: it87: Drop FSF mailing address watchdog: dw_wdt: get reset lines from dt watchdog: bindings: dw_wdt: add reset lines watchdog: w83627hf: Add support for NCT6793D and NCT6795D watchdog: core: add option to avoid early handling of watchdog watchdog: f71808e_wdt: Add F71868 support watchdog: Add STM32 IWDG driver ...
2017-07-03watchdog: introduce watchdog_worker_should_ping helperRasmus Villemoes1-4/+9
This will be useful when the condition becomes slightly more complicated in the next patch. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Esben Haabendal <esben@haabendal.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: uniphier: add UniPhier watchdog driverKeiji Hayashibara3-0/+281
Add a watchdog driver for Socionext UniPhier series SoC. Note that the timeout value for this device must be a power of 2 because of the specification. Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: cadence_wdt: make of_device_ids const.Arvind Yadav1-1/+1
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 1962 612 4 2578 a12 drivers/watchdog/cadence_wdt.o File size after constify cdns_wdt_of_match: text data bss dec hex filename 2378 196 4 2578 a12 drivers/watchdog/cadence_wdt.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: zx2967: constify zx2967_wdt_ops.Arvind Yadav1-1/+1
File size before: text data bss dec hex filename 988 288 0 1276 4fc drivers/watchdog/zx2967_wdt.o File size After adding 'const': text data bss dec hex filename 1084 192 0 1276 4fc drivers/watchdog/zx2967_wdt.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: bcm47xx_wdt: constify bcm47xx_wdt_hard_ops and bcm47xx_wdt_soft_opsArvind Yadav1-2/+2
File size before: text data bss dec hex filename 1282 388 1 1671 687 drivers/watchdog/bcm47xx_wdt.o File size After adding 'const': text data bss dec hex filename 1474 196 1 1671 687 drivers/watchdog/bcm47xx_wdt.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: davinci: Add missing clk_disable_unprepare().Arvind Yadav1-1/+3
davinci_wdt_probe() can fail here and we must disable clock. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: davinci: Handle return value of clk_prepare_enableArvind Yadav1-1/+5
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: meson: Handle return value of clk_prepare_enableArvind Yadav1-1/+3
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: it87: Add support for various Super-IO chipsGuenter Roeck2-5/+21
Add support for IT8607, IT8622, IT8625, IT8628, IT8655, IT8665, and IT8686. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: it87: Use infrastructure to stop watchdog on rebootGuenter Roeck1-29/+5
Use watchdog_stop_on_reboot() to stop the watchdog on reboot instead of registering a driver-specific notifier. While at it, reorder remaining include files alphabetically. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: it87: Drop support for resetting watchdog though CIR and Game portGuenter Roeck2-210/+19
Resetting the watchdog timer on CIR interrupts or on game port interrupts is not not supported on recent chips, and doesn't really tell if the system is stable. On top of that, at least the bit to enable resetting the watchdog through the game port is used differently on recent chips. Drop resetting the watchdog on CIR or game port interrupts to simplify the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: it87: Convert to use watchdog core infrastructureGuenter Roeck2-304/+72
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: it87: Drop FSF mailing addressGuenter Roeck1-4/+0
The FSF mailing address may change. Drop it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-07-03watchdog: dw_wdt: get reset lines from dtSteffen Trumtrar1-0/+11
The dw_wdt has an external reset line, that can keep the device in reset and therefore rendering it useless and also is the only way of stopping the watchdog once it was started. Get the reset lines for this core from the devicetree. As these lines are optional, use devm_reset_control_get_optional_shared. If the reset line is not specified in the devicetree, the reset framework will just skip deasserting and continue. This way all users of the driver will continue to function without any harm, even if the reset line is not specified in the devicetree. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-15drivers/watchdog/Kconfig: Update CONFIG_WATCHDOG_RTAS dependenciesMurilo Opsfelder Araujo1-1/+1
drivers/watchdog/wdrtas.c uses symbols defined in arch/powerpc/kernel/rtas.c, which are exported iff CONFIG_PPC_RTAS is selected. Building wdrtas.c without setting CONFIG_PPC_RTAS throws the following errors: ERROR: ".rtas_token" [drivers/watchdog/wdrtas.ko] undefined! ERROR: "rtas_data_buf" [drivers/watchdog/wdrtas.ko] undefined! ERROR: "rtas_data_buf_lock" [drivers/watchdog/wdrtas.ko] undefined! ERROR: ".rtas_get_sensor" [drivers/watchdog/wdrtas.ko] undefined! ERROR: ".rtas_call" [drivers/watchdog/wdrtas.ko] undefined! This was identified during a randconfig build where CONFIG_WATCHDOG_RTAS=m and CONFIG_PPC_RTAS was not set. Logs are here: http://kisskb.ellerman.id.au/kisskb/buildresult/12982152/ This patch fixes the issue by updating CONFIG_WATCHDOG_RTAS to depend on just CONFIG_PPC_RTAS, removing COMPILE_TEST entirely. Signed-off-by: Murilo Opsfelder Araujo <mopsfelder@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-05watchdog: w83627hf: Add support for NCT6793D and NCT6795DGuenter Roeck1-1/+14
Both NCT6793D and NCT6795D are compatible to NCT6792D. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: core: add option to avoid early handling of watchdogSebastian Reichel2-3/+27
On some systems its desirable to have watchdog reboot the system when it does not come up fast enough. This adds a kernel parameter to disable the auto-update of watchdog before userspace takes over and a kernel option to set the default. The info messages were added to shorten error searching on misconfigured systems. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: f71808e_wdt: Add F71868 supportMaciej S. Szmigiero2-10/+24
This adds support for watchdog part of Fintek F71868 Super I/O chip to f71808e_wdt driver. The F71868 chip is, in general, very similar to a F71869, however it has slightly different set of available reset pulse widths. Tested on MSI A55M-P33 motherboard. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: Add STM32 IWDG driverYannick Fertre3-0/+266
This patch adds IWDG (Independent WatchDoG) support for STM32 platform. Signed-off-by: Yannick FERTRE <yannick.fertre@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: gpio: Convert to use infrastructure triggered keepalivesGuenter Roeck1-60/+13
The watchdog infrastructure now supports handling watchdog keepalive if the watchdog is running while the watchdog device is closed. The infrastructure now also supports generating additional heartbeats if the maximum hardware timeout is smaller than or close to the configured timeout. Convert the driver to use this infrastructure. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: orion: make license info match the file headerUwe Kleine-König1-1/+1
The header says: This file is licensed under the terms of the GNU General Public License version 2. The right identifier for MODULE_LICENSE is "GPL v2" then. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: s3c2410: Minor code cleanupKrzysztof Kozlowski1-22/+13
Cleanup the code from minor readability issues (no functional changes): 1. Fix checkpatch: ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address. 2. Fix checkpatch: WARNING: quoted string split across lines 3. Fix chechpatch: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' 4. Use 'dev' consistently in probe function instead of mixing dev with &pdev->dev. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: s3c2410: Simplify getting driver dataKrzysztof Kozlowski1-7/+10
Simplify the flow in helper function for getting the driver data by using of_device_get_match_data() and only one if() branch. The code should be equivalent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: s3c2410: Constify local structuresKrzysztof Kozlowski1-3/+3
Structures watchdog_device, watchdog_ops and s3c2410_wdt_variant are not modified so they can be made const to increase code safeness. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: intel-mid_wdt: Keep watchdog runningAndy Shevchenko1-2/+15
Firmware followed by bootloader leaves watchdog running. Keep it running in the driver. User will not need any additional options to reboot in case of panic during boot. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: add rza_wdt driverChris Brandt3-0/+208
Adds a watchdog timer driver for the Renesas RZ/A Series SoCs. A reset handler is also included since a WDT overflow is the only method for restarting an RZ/A SoC. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchdog: sama5d4: Add comment explaining what happens on resumeAlexandre Belloni1-0/+5
Because suspending to RAM may lose the register values, they are restored on resume. This is currently done unconditionally because there is currently no way to know (from the driver) whether they have really been lost or are still valid. Writing MR also pings the watchdog and this may not be what is expected so add a comment explaining why it happens. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-06-05watchodg: sama5d4: simplify probeAlexandre Belloni1-8/+6
Because the only way to use the driver is to have a device tree enabling it, pdev->dev.of_node will never be NULL. Remove the unnecessary check. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19watchdog: bcm281xx: Fix use of uninitialized spinlock.Eric Anholt1-1/+2
The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so initialize it earlier. Fixes a warning at boot with lock debugging enabled. Fixes: 6adb730dc208 ("watchdog: bcm281xx: Watchdog Driver") Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19watchdog: zx2967: remove redundant dev_err call in zx2967_wdt_probe()Wei Yongjun1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-19iTCO_wdt: all versions count down twicePaolo Bonzini1-12/+10
The ICH9 is listed as having TCO v2, and indeed the behavior in the datasheet corresponds to v2 (for example the NO_REBOOT flag is accessible via the 16KiB-aligned Root Complex Base Address). However, the TCO counts twice just like in v1; the documentation of the SECOND_TO_STS bit says: "ICH9 sets this bit to 1 to indicate that the TIMEOUT bit had been (or is currently) set and a second timeout occurred before the TCO_RLD register was written. If this bit is set and the NO_REBOOT config bit is 0, then the ICH9 will reboot the system after the second timeout. The same can be found in the BayTrail (Atom E3800) datasheet, and even HOWTOs around the Internet say that it will reboot after _twice_ the specified heartbeat. I did not find the Apollo Lake datasheet, but because v4/v5 has a SECOND_TO_STS bit just like the previous version I'm enabling this for Apollo Lake as well. Cc: linux-watchdog@vger.kernel.org Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: wdt_pci: fix build error if define SOFTWARE_REBOOTShile Zhang1-1/+1
To fix following build error when SOFTWARE_REBOOT is defined: CC [M] driver/watchdog/wdt_pci.o driver/watchdog/wdt_pci.c: In function 'wdtpci_interrupt': driver/watchdog/wdt_pci.c:335:3: error: too many arguments to function 'emergency_restart' emergency_restart(NULL); ^ In file included from driver/watchdog/wdt_pci.c:51:0: include/linux/reboot.h:80:13: note: declared here extern void emergency_restart(void); ^ Signed-off-by: Shile Zhang <shile.zhang@nokia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: cadence_wdt: fix timeout settingTomas Melin1-1/+1
wdt_timeout must not be initialized to CDNS_WDT_DEFAULT_TIMEOUT in order to allow the value to be overriddden by a device tree setting. This way, the default timeout value will be used only in case module_param has not been set, or device tree timeout-sec has not been defined. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: pcwd_usb: fix NULL-deref at probeJohan Hovold1-0/+3
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: sama5d4: fix race conditionAlexandre Belloni1-4/+29
WDT_MR and WDT_CR must not updated within three slow clock periods after the last ping (write to WDT_CR or WDT_MR). Ensure enough time has elapsed before writing those registers. wdt_write() waits for 4 periods to ensure at least 3 edges are seen by the IP. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou.Yang <wenyou.yang@microchip.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: sama5d4: fix WDDIS handlingAlexandre Belloni1-18/+30
The datasheet states: "When setting the WDDIS bit, and while it is set, the fields WDV and WDD must not be modified." Because the whole configuration is already cached inside .mr, wait for the user to enable the watchdog to configure it so it is enabled and configured at the same time (what the IP is actually expecting). When the watchdog is already enabled, it is not an issue to reconfigure it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Wenyou.Yang <wenyou.yang@microchip.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-18watchdog: orion: fix compile-test dependenciesArnd Bergmann1-1/+1
I ran into one corner case with the orion watchdog using the atomic_io_modify interface: drivers/watchdog/orion_wdt.o: In function `orion_stop': orion_wdt.c:(.text.orion_stop+0x28): undefined reference to `atomic_io_modify' drivers/watchdog/orion_wdt.o: In function `armada375_stop': orion_wdt.c:(.text.armada375_stop+0x28): undefined reference to `atomic_io_modify' This function is available on all 32-bit ARM builds except for ebsa110, so we have to specifically exclude that from compile-testing. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-05-10Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds5-7/+7
Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...
2017-05-08drivers/watchdog/hpwdt.c: use set_memory.h headerLaura Abbott1-1/+1
set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-10-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-28watchdog: iTCO_wdt: Add PMC specific noreboot update apiKuppuswamy Sathyanarayanan1-7/+18
In some SoCs, setting noreboot bit needs modification to PMC GC registers. But not all PMC drivers allow other drivers to memory map their GC region. This could create mem request conflict in watchdog driver. So this patch adds facility to allow PMC drivers to pass noreboot update function to watchdog drivers via platform data. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-04-28watchdog: iTCO_wdt: cleanup set/unset no_reboot_bit functionsKuppuswamy Sathyanarayanan1-33/+50
iTCO_wdt no_reboot_bit set/unset functions has lot of common code between them. So merging these two functions into a single update function would remove these unnecessary code duplications. This patch fixes this issue by creating a no_reboot_bit update function to handle both set/unset functions. Also checking for iTCO version every time you make no_reboot_bit set/unset call is inefficient and makes the code look complex. This can be improved by performing this check once during device probe and selecting the appropriate no_reboot_bit update function. This patch fixes this issue by splitting the update function into multiple helper functions. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-04-20Annotate hardware config module parameters in drivers/watchdog/David Howells5-7/+7
When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/watchdog/. Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> cc: Wim Van Sebroeck <wim@iguana.be> cc: Zwane Mwaikambo <zwanem@gmail.com> cc: linux-watchdog@vger.kernel.org
2017-03-01watchdog: retu: restore MFD dependencyArnd Bergmann1-1/+1
The retu watchdog calls into the respective mfd driver, but fails to link if that is diabled: drivers/watchdog/built-in.o: In function `retu_wdt_set_timeout': ziirave_wdt.c:(.text+0x8c88): undefined reference to `retu_write' ziirave_wdt.c:(.text+0x8c88): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write' drivers/watchdog/built-in.o: In function `retu_wdt_start': ziirave_wdt.c:(.text+0x8cc8): undefined reference to `retu_write' ziirave_wdt.c:(.text+0x8cc8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `retu_write' This restores the dependency as it was before Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: db8500: add back prmcu dependencyArnd Bergmann1-1/+1
When the db8500 watchdog is enabled without the PRCMU, we get a lot of warnings about duplicate or missing helper functions: In file included from drivers/watchdog/ux500_wdt.c:21:0: include/linux/mfd/dbx500-prcmu.h:422:19: error: redefinition of 'prcmu_abb_read' static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) This restores the dependency as it was. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: kempld: fix gcc-4.3 buildArnd Bergmann1-1/+8
gcc-4.3 can't decide whether the constant value in kempld_prescaler[PRESCALER_21] is built-time constant or not, and gets confused by the logic in do_div(): drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout': kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod' This adds a call to ACCESS_ONCE() to force it to not consider it to be constant, and leaves the more efficient normal case in place for modern compilers, using an #ifdef to annotate why we do this hack. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: softdog: fire watchdog even if softirqs do not get to runNiklas Cassel1-17/+27
Checking for timer expiration is done from the softirq TIMER_SOFTIRQ. Since commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), pending softirqs are no longer always handled immediately, instead, if there are pending softirqs, and ksoftirqd is in state TASK_RUNNING, the handling of the softirqs are deferred, and are instead supposed to be handled by ksoftirqd, when ksoftirqd gets scheduled. If a user space process with a real-time policy starts to misbehave by never relinquishing the CPU while ksoftirqd is in state TASK_RUNNING, what will happen is that all softirqs will get deferred, while ksoftirqd, which is supposed to handle the deferred softirqs, will never get to run. To make sure that the watchdog is able to fire even when we do not get to run softirqs, replace the timers with hrtimers. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: kempld: revert to full dependencyArnd Bergmann1-1/+1
The kempld watchdog driver requires the respective MFD driver: drivers/watchdog/built-in.o: In function `kempld_wdt_probe': kempld_wdt.c:(.text+0x5c78): undefined reference to `kempld_get_mutex' kempld_wdt.c:(.text+0x5c84): undefined reference to `kempld_read8' kempld_wdt.c:(.text+0x5c8e): undefined reference to `kempld_release_mutex' kempld_wdt.c:(.text+0x5d1c): undefined reference to `kempld_read8' kempld_wdt.c:(.text+0x5d2c): undefined reference to `kempld_write8' This adds the Kconfig dependency back. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: bcm2835: add CONFIG_OF dependencyArnd Bergmann1-1/+1
Without CONFIG_OF, the driver fails to link: drivers/watchdog/built-in.o: In function `bcm2835_power_off': bcm2835_wdt.c:(.text+0x1946): undefined reference to `of_find_device_by_node' This adds a new dependency, to allow the COMPILE_TEST check to succeed. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-03-01watchdog: sp805: add back AMBA dependencyArnd Bergmann1-1/+1
The driver fails to link if ARM_AMBA is disabled: drivers/watchdog/sp805_wdt.o: In function `sp805_wdt_driver_init': sp805_wdt.c:(.init.text+0x4): undefined reference to `amba_driver_register' It seems that the COMPILE_TEST was added in the wrong place, as there is no architecture dependency, but a bus dependency. This moves the dependency accordingly. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.