aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2012-03-29sh: intc: Fix up section mismatch for intc_ack_dataPaul Mundt1-3/+2
intc_ack_data is flagged as __init when it shouldn't be, causing section mismatches in non-init paths like intc_set_ack_handle(): WARNING: drivers/built-in.o(.text+0x5d760): Section mismatch in reference from the function intc_set_ack_handle() to the function .init.text:intc_ack_data() The function intc_set_ack_handle() references the function __init intc_ack_data(). This is often because intc_set_ack_handle lacks a __init annotation or the annotation of intc_ack_data is wrong. Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28sh: select ARCH_DISCARD_MEMBLOCK.Paul Mundt1-0/+1
We don't require it outside of the __init context, so discard it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28sh: Consolidate duplicate _32/_64 unistd definitions.Paul Mundt3-80/+40
This does some more tidying and converging of the header split, following the x86 example. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28sh: ecovec: switch SDHI controllers to card pollingGuennadi Liakhovetski1-41/+63
Polling for card hotplug events is a better option than using SDHI native hotplug interrupt, because the latter option forces the controller to stay permanently powered up and enabled. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28sh: Avoid exporting unimplemented syscalls.Paul Mundt4-70/+71
Now that userspace is making use of kernel-provided sanitized headers for working out supported interfaces, we need to be a bit more diligent with matching the syscall definitions with their actual wiring/support state. In theory it shouldn't hurt anything since sys_ni_syscall will ultimately do the right thing, but there's also not much need to lie about legacy x86 syscalls that we've never supported. This tightens things up a bit for uClibc at least. Suggested-by: Carmelo Amoroso <carmelo.amoroso@st.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28sh: add platform_device for RSPI in setup-sh7757Shimoda, Yoshihiro1-0/+20
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28SH: pci-sh7780: enable big-endian operation.Thomas Schwinge1-3/+12
If in big-endian mode, switch the PCI bus, too. Tested on both litte-endian and big-endian sh7785lcr. Signed-off-by: Thomas Schwinge <thomas@codesourcery.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28serial: sh-sci: fix a race of DMA submit_tx on transferYoshii Takashi1-5/+10
When DMA is enabled, sh-sci transfer begins with uart_start() sci_start_tx() if (cookie_tx < 0) schedule_work() Then, starts DMA when wq scheduled, -- (A) process_one_work() work_fn_rx() cookie_tx = desc->submit_tx() And finishes when DMA transfer ends, -- (B) sci_dma_tx_complete() async_tx_ack() cookie_tx = -EINVAL (possible another schedule_work()) This A to B sequence is not reentrant, since controlling variables (for example, cookie_tx above) are not queues nor lists. So, they must be invoked as A B A B..., otherwise results in kernel crash. To ensure the sequence, sci_start_tx() seems to test if cookie_tx < 0 (represents "not used") to call schedule_work(). But cookie_tx will not be set (to a cookie, also means "used") until in the middle of work queue scheduled function work_fn_tx(). This gap between the test and set allows the breakage of the sequence under the very frequently call of uart_start(). Another gap between async_tx_ack() and another schedule_work() results in the same issue, too. This patch introduces a new condition "cookie_tx == 0" just to mark it is "busy" and assign it within spin-locked region to fill the gaps. Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28sh: dma: Collect up CHCR of SH7763, SH7764, SH7780 and SH7785Nobuhiro Iwamatsu1-17/+5
CHCR of SH7763, SH7764, SH7780 and SH7785 is constitution same as SH7757. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28sh: dma: Collect up CHCR of SH7723 and SH7730Nobuhiro Iwamatsu1-7/+3
CHCR of SH7723 and SH7730 is constitution same as SH7724. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-28sh/next: Fix build fail by asm/system.h in asm/bitops.hNobuhiro Iwamatsu1-1/+0
Other files are not done include definitely by asm/system.h made include in asm/bitops.h. This patch remove asm/system.h from asm/bitops.h. ----- LANG=C make ARCH=sh CROSS_COMPILE=sh4-linux-gnu- CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/machtypes.h' is up to date. CC arch/sh/kernel/asm-offsets.s In file included from include/asm-generic/getorder.h:7, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/page.h:187, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/mmu.h:38, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/system_32.h:5, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/system.h:179, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/bitops.h:10, from include/linux/bitops.h:22, from include/linux/thread_info.h:52, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/mmzone.h:7, from include/linux/gfp.h:4, from include/linux/mm.h:8, from arch/sh/kernel/asm-offsets.c:13: include/linux/log2.h: In function '__ilog2_u32': include/linux/log2.h:34: error: implicit declaration of function 'fls' include/linux/log2.h: In function '__ilog2_u64': include/linux/log2.h:42: error: implicit declaration of function 'fls64' include/linux/log2.h: In function '__roundup_pow_of_two': include/linux/log2.h:63: error: implicit declaration of function 'fls_long' ----- Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-27net: fix a potential rcu_read_lock() imbalance in rt6_fill_node()Eric Dumazet1-2/+6
Commit f2c31e32b378 (net: fix NULL dereferences in check_peer_redir() ) added a regression in rt6_fill_node(), leading to rcu_read_lock() imbalance. Thats because NLA_PUT() can make a jump to nla_put_failure label. Fix this by using nla_put() Many thanks to Ben Greear for his help Reported-by: Ben Greear <greearb@candelatech.com> Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-25ARM: 7343/1: sa11x0: convert to sparse IRQRussell King5-12/+13
Now that Neponset, UCB1x00 and SA1111 are all converted to use the IRQ allocation interfaces, we can enable sparse IRQ support for SA11x0 platforms.
2012-03-25ARM: 7342/2: sa1100: prepare for sparse irq conversionRob Herring21-11/+40
In preparation to convert SA1100 to sparse irq, set .nr_irqs for each machine and explicitly include mach/irqs.h as needed. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-25ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irqRob Herring2-0/+2
In preparation for sa11x0 sparse irq conversion, explicitly include mach/irqs.h as it will not be included for sparse irq. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-25ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.hRob Herring1-1/+1
Since asm/irq.h may not include mach/irqs.h, include mach/irqs.h directly. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-25ARM: sa11x0: remove unused DMA controller definitionsRussell King2-218/+3
Remove the new unused DMA controller definitions from mach/SA-1100.h. These are now private to the SA-11x0 DMA engine driver and contained within the driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-25ARM: sa11x0: remove old SoC private DMA driverRussell King3-466/+1
Now that all users are converted over to using the DMA engine API, we can get rid of the old platform dependent DMA driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-25net: add a truesize parameter to skb_add_rx_frag()Eric Dumazet7-9/+13
skb_add_rx_frag() API is misleading. Network skbs built with this helper can use uncharged kernel memory and eventually stress/crash machine in OOM. Add a 'truesize' parameter and then fix drivers in followup patches. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-25gianfar: Fix possible overrun and simplify interrupt name field creationJoe Perches2-33/+8
Space allocated for int_name_<foo> is insufficient for maximal device name, expand it. Code to create int_name_<foo> is obscure, simplify it by using sprintf. Found by looking for unnecessary \ line continuations. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-25USB: qmi_wwan: Add ZTE (Vodafone) K3570-Z and K3571-Z net interfacesAndrew Bird (Sphere Systems)1-0/+18
Now that we have the beginnings of an OSS method to use the network interfaces on these USB broadband modems, add the ZTE manufactured Vodafone items to the whitelist Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-25USB: option: Ignore ZTE (Vodafone) K3570/71 net interfacesAndrew Bird (Sphere Systems)1-2/+4
These interfaces need to be handled by QMI/WWAN driver Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-25USB: qmi_wwan: Add ZTE (Vodafone) K3565-Z and K4505-Z net interfacesAndrew Bird (Sphere Systems)1-0/+18
Now that we have the beginnings of an OSS method to use the network interfaces on these USB broadband modems, add the ZTE manufactured Vodafone items to the whitelist Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-25um: Update defconfigRichard Weinberger1-184/+471
Enable ext4, cgroups and devtmpfs. Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: Switch to large mcmodel on x86_64Richard Weinberger1-0/+1
x86_64 UML is unable to load modules if more than 504MiB of memory are used. This happens because on x86_64 the UML process has a quite high start address (typically around 0x6000000). If UML's memory is larger than 504MiB VMALLOC_START happens to be after 0x8000000. This is no problem unless one loads a module which was built with R_X86_64_32S relocations. Symbols with a location > 0x8000000 cannot be used with R_X86_64_32S To deal with this x86_64 UML has to be compiled with -mcmodel=large such that no R_X86_64_32S relocations are used. Signed-off-by: Richard Weinberger <richard@nod.at> Reported-by: 전하늘 <allskyee@gmail.com>
2012-03-25MTD: Relax dependenciesRichard Weinberger5-1/+6
CONFIG_GENERIC_IO is just enough for the basic MTD stuff. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-03-25um: Wire CONFIG_GENERIC_IO upRichard Weinberger1-0/+1
UML has no io memory but implements everything defined in generic-asm/io.h. Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: Serve io_remap_pfn_range()Richard Weinberger1-0/+2
At some places io_remap_pfn_range() is needed. UML has to serve it like all other archs do. Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25Introduce CONFIG_GENERIC_IORichard Weinberger1-0/+5
There are situations where CONFIG_HAS_IOMEM is too restrictive. For example CONFIG_MTD_NAND_NANDSIM depends on CONFIG_HAS_IOMEM but it works perfectly fine if an architecture without io memory just includes asm-generic/io.h or implements everything defined in it. UML is such a corner case. Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: allow SUBARCH=x86Al Viro1-2/+2
nicked from patch by dwmw2 back in July Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: most of the SUBARCH uses can be killedAl Viro3-7/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [richard@nod.at: Re-export SUBARCH in arch/um/Makefile] Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: deadlock in line_write_interrupt()Al Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: don't bother trying to rebuild CHECKFLAGS for USER_OBJSAl Viro1-4/+3
... just strip NOSTDINC_FLAGS out of it for those Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: use the right ifdef around exports in user_syms.cAl Viro2-3/+1
... the same one that controls whether elf_aux.o is included into the build, bringing the vsyscall_e... into it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: a bunch of headers can be killed by using generic-yAl Viro7-124/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: ptrace-generic.h doesn't need user.hAl Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: kill HOST_TASK_PIDAl Viro4-8/+4
just provide get_current_pid() to the userland side of things instead of get_current() + manual poking in its results Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: remove pointless include of asm/fixmap.h from asm/pgtable.hAl Viro1-2/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: asm-offsets.h might as well come from underlying arch...Al Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: merge processor_{32,64}.h a bit...Al Viro3-20/+10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: switch close_chan() to struct lineAl Viro3-9/+11
... and switch chan_interrupt() to directly calling close_one_chan(), so we can lose delay_free_irq argument of close_chan() as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: race fix: initialize delayed_work *before* registering IRQAl Viro3-18/+15
... since chan_interrupt() might schedule it if there's too much incoming data. Kill task argument of chan_interrupt(), while we are at it - it's always &line->task. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: line->have_irq is never checked...Al Viro2-2/+0
looks like a half-arsed duplicate of line->enabled Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: chan_init_pri is dead nowAl Viro1-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: switch users of ->chan_list to ->chan_{in,out} (easy cases)Al Viro5-128/+88
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: sorting out the chan mess, part 1Al Viro2-0/+5
put references to in and out chans associated with line into explicit struct chan * fields in it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: finally kill ->init_str leaksAl Viro1-1/+3
now we can do that... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: get rid of lines_init()Al Viro4-46/+33
move config-independent parts of initialization into register_lines(), call setup_one_line() after it instead of abusing ->init_str. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: switch line.c tty drivers to dynamic device creationAl Viro4-42/+40
Current code doesn't update the symlinks in /sys/dev/char when we add/remove tty lines. Fixing that allows to stop messing with ->valid before the driver registration, which is a Good Thing(tm) - we shouldn't have it set before we really have the things set up and ready for line_open(). We need tty_driver available to call tty_{un,}register_device(), so we just stash a reference to it into struct line_driver. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25um: fix races between line_open() and line_config()Al Viro2-28/+29
Pull parse_chan_pair() call into setup_one_line(), under the mutex. We really don't want open() to succeed before parse_chan_pair() had been done (or after it has failed, BTW). We also want "remove con<n>" to free irqs, etc., same as "config con<n>=none". Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.