aboutsummaryrefslogtreecommitdiffstats
path: root/drivers (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-07intel-ethernet: software timestamp skbs as late as possibleJacob Keller5-10/+10
Many of the Intel Ethernet drivers call skb_tx_timestamp() earlier than necessary. Move the calls to this function to the latest point possible, just prior to notifying hardware of the new Tx packet when we bump the tail register. This affects i40e, iavf, igb, igc, and ixgbe. The e100, e1000, e1000e, fm10k, and ice drivers already call the skb_tx_timestamp() function just prior to indicating the Tx packet to hardware, so they do not need to be changed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07ixgbevf: add support for software timestampsJacob Keller1-0/+2
Add a call to skb_tx_timestamp in the ixgbevf_tx_map function. This enables software timestamping for packets sent over this device driver. The call is placed just prior to when we notify hardware of the new packet, in order to software timestamp as close as possible to when the hardware will transmit. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07ixgbe: allow IPsec Tx offload in VEPA modeShannon Nelson1-1/+3
When it's possible that the PF might end up trying to send a packet to one of its own VFs, we have to forbid IPsec offload because the device drops the packets into a black hole. See commit 47b6f50077e6 ("ixgbe: disallow IPsec Tx offload when in SR-IOV mode") for more info. This really is only necessary when the device is in the default VEB mode. If instead the device is running in VEPA mode, the packets will go through the encryption engine and out the MAC/PHY as normal, and get "hairpinned" as needed by the switch. So let's not block IPsec offload when in VEPA mode. To get there with the ixgbe device, use the handy 'bridge' command: bridge link set dev eth1 hwmode vepa Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07ixgbe: don't clear_bit on xdp_ring->state if xdp_ring is nullColin Ian King1-1/+2
There is an earlier check to see if xdp_ring is null when configuring the tx ring, so assuming that it can still be null, the clearing of the xdp_ring->state currently could end up with a null pointer dereference. Fix this by only clearing the bit if xdp_ring is not null. Detected by CoverityScan, CID#1473795 ("Dereference after null check") Fixes: 024aa5800f32 ("ixgbe: added Rx/Tx ring disable/enable functions") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07igbvf: Replace spin_is_locked() with lockdepLance Roy1-2/+2
lockdep_assert_held() is better suited to checking locking requirements, since it won't get confused when someone else holds the lock. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-06net: systemport: Unmap queues upon DSA unregister eventFlorian Fainelli1-6/+50
Binding and unbinding the switch driver which creates the DSA slave network devices for which we set-up inspection would lead to undesireable effects since we were not clearing the port/queue mapping to the SYSTEMPORT TX queue. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: systemport: Simplify queue mapping logicFlorian Fainelli2-9/+9
The use of a bitmap speeds up the finding of the first available queue to which we could start establishing the mapping for, but we still have to loop over all slave network devices to set them up. Simplify the logic to have a single loop, and use the fact that a correctly configured ring has inspect set to true. This will make things simpler to unwind during device unregistration. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: dsa: bcm_sf2: Turn on PHY to allow successful registrationFlorian Fainelli1-0/+4
We are binding to the PHY using the SF2 slave MDIO bus that we create, binding involves reading the PHY's MII_PHYSID1/2 which won't be possible if the PHY is turned off. Temporarily turn it on/off for the bus probing to succeeed. This fixes unbind/bind problems where the port connecting to that PHY would be in error since it could not connect to it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: systemport: Restore Broadcom tag match filters upon resumeFlorian Fainelli2-0/+13
Some of the system suspend states that we support wipe out entirely the HW contents. If we had a Wake-on-LAN filter programmed prior to going into suspend, but we did not actually wake-up from Wake-on-LAN and instead used a deeper suspend state, make sure we restore the CID number that we need to match against. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: dsa: bcm_sf2: Get rid of unmarshalling functionsFlorian Fainelli1-310/+0
Now that we have migrated the CFP rule handling to a list with a software copy, the delete/get operation just returns what is on the list, no need to read from the hardware which is both slow and more error prone. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: dsa: bcm_sf2: Restore CFP rules during system resumeFlorian Fainelli3-0/+41
The hardware can lose its context during system suspend, and depending on the switch generation (7445 vs. 7278), while the rules are still there, they will have their valid bit cleared (because that's the fastest way for the HW to reset things). Just make sure we re-apply them coming back from resume. The 7445 switch is an older version of the core that has some quirky RAM technology requiring a delete then re-inser to guarantee the RAM entries are properly latched. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: dsa: bcm_sf2: Split rule handling from HW operationFlorian Fainelli1-35/+54
In preparation for restoring CFP rules during system wide system suspend/resume where the hardware loses its context, split the rule validation from its actual insertion as well as the rule removal from its actual hardware deletion operation. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: dsa: bcm_sf2: Keep copy of inserted rulesFlorian Fainelli3-11/+137
We tried hard to use the hardware as a storage area, which made things needlessly complex in that we had to both marshall and unmarshall the ethtool_rx_flow_spec into what the CFP hardware understands but it did not require any driver level allocations, so that was nice. Keep a copy of the ethtool_rx_flow_spec rule we want to insert, and also make sure we don't have a duplicate rule already. This greatly speeds up the deletion time since we only need to clear the slice's valid bit and not perform a full read. This is a preparatory step for being able to restore rules upon system resumption where the hardware loses its context partially or entirely. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06net: Add extack argument to rtnl_create_linkDavid Ahern4-4/+4
Add extack arg to rtnl_create_link and add messages for invalid number of Tx or Rx queues. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06ISDN: eicon: Remove driverOlof Johansson84-41748/+0
I started looking at the history of this driver, and last time the maintainer was active on the mailing list was when discussing how to remove it. This was in 2012: https://lore.kernel.org/lkml/4F4DE175.30002@melware.de/ It looks to me like this has in practice been an orphan for quite a while. It's throwing warnings about stack size in a function that is in dire need of refactoring, and it's probably a case of "it's time to call it". Cc: Armin Schindler <mac@melware.de> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds17-277/+250
Pull networking fixes from David Miller: 1) Handle errors mid-stream of an all dump, from Alexey Kodanev. 2) Fix build of openvswitch with certain combinations of netfilter options, from Arnd Bergmann. 3) Fix interactions between GSO and BQL, from Eric Dumazet. 4) Don't put a '/' in RTL8201F's sysfs file name, from Holger Hoffstätte. 5) S390 qeth driver fixes from Julian Wiedmann. 6) Allow ipv6 link local addresses for netconsole when both source and destination are link local, from Matwey V. Kornilov. 7) Fix the BPF program address seen in /proc/kallsyms, from Song Liu. 8) Initialize mutex before use in dsa microchip driver, from Tristram Ha. 9) Out-of-bounds access in hns3, from Yunsheng Lin. 10) Various netfilter fixes from Stefano Brivio, Jozsef Kadlecsik, Jiri Slaby, Florian Westphal, Eric Westbrook, Andrey Ryabinin, and Pablo Neira Ayuso. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (50 commits) net: alx: make alx_drv_name static net: bpfilter: fix iptables failure if bpfilter_umh is disabled sock_diag: fix autoloading of the raw_diag module net: core: netpoll: Enable netconsole IPv6 link local address ipv6: properly check return value in inet6_dump_all() rtnetlink: restore handling of dumpit return value in rtnl_dump_all() net/ipv6: Move anycast init/cleanup functions out of CONFIG_PROC_FS bonding/802.3ad: fix link_failure_count tracking net: phy: realtek: fix RTL8201F sysfs name sctp: define SCTP_SS_DEFAULT for Stream schedulers sctp: fix strchange_flags name for Stream Change Event mlxsw: spectrum: Fix IP2ME CPU policer configuration openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELS qed: fix link config error handling net: hns3: Fix for out-of-bounds access when setting pfc back pressure net/mlx4_en: use __netdev_tx_sent_queue() net: do not abort bulk send on BQL status net: bql: add __netdev_tx_sent_queue() s390/qeth: report 25Gbit link speed s390/qeth: sanitize ARP requests ...
2018-11-05net: alx: make alx_drv_name staticRasmus Villemoes2-2/+1
alx_drv_name is not used outside main.c, so there's no reason for it to have external linkage. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-04bonding/802.3ad: fix link_failure_count trackingJarod Wilson1-2/+2
Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values were read, to fix a problem with slaves getting into weird states, but in the process, broke tracking of link failures, as going straight to BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted) means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because !link_state was already true, we never incremented commit, and never got a chance to call bond_miimon_commit(), where slave->link_failure_count would be incremented. I believe the simple fix here is to mark the slave as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from _FAIL to either _UP or _DOWN, and in the latter case, we now get proper incrementing of link_failure_count again. Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event") CC: Mahesh Bandewar <maheshb@google.com> CC: David S. Miller <davem@davemloft.net> CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-04net: phy: realtek: fix RTL8201F sysfs nameHolger Hoffstätte1-1/+1
Since 4.19 the following error in sysfs has appeared when using the r8169 NIC driver: $cd /sys/module/realtek/drivers $ls -l ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory [..garbled dir entries follow..] Apparently the forward slash in "10/100Mbps Ethernet" is interpreted as directory separator that leads nowhere, and was introduced in commit 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions"). Fix this by removing the offending slash in the driver name. Other drivers in net/phy seem to have the same problem, but I cannot test/verify them. Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions") Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-04Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds2-0/+3
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
2018-11-04Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds4-0/+347
Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-04Merge tag 'ntb-4.20' of git://github.com/jonmason/ntbLinus Torvalds6-110/+429
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
2018-11-03mlxsw: spectrum: Fix IP2ME CPU policer configurationShalom Toledo1-1/+0
The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03qed: fix link config error handlingArnd Bergmann1-2/+5
gcc-8 notices that qed_mcp_get_transceiver_data() may fail to return a result to the caller: drivers/net/ethernet/qlogic/qed/qed_mcp.c: In function 'qed_mcp_trans_speed_mask': drivers/net/ethernet/qlogic/qed/qed_mcp.c:1955:2: error: 'transceiver_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] When an error is returned by qed_mcp_get_transceiver_data(), we should propagate that to the caller of qed_mcp_trans_speed_mask() rather than continuing with uninitialized data. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-12/+4
Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
2018-11-03Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-2/+2
Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
2018-11-03Merge branch 'core/urgent' into x86/urgent, to pick up objtool fixIngo Molnar2394-52991/+197761
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-03net: hns3: Fix for out-of-bounds access when setting pfc back pressureYunsheng Lin1-6/+4
The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03net/mlx4_en: use __netdev_tx_sent_queue()Eric Dumazet1-2/+4
doorbell only depends on xmit_more and netif_tx_queue_stopped() Using __netdev_tx_sent_queue() avoids messing with BQL stop flag, and is more generic. This patch increases performance on GSO workload by keeping doorbells to the minimum required. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-14/+22
Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
2018-11-03Merge tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds3-11/+11
Pull Kbuild updates from Masahiro Yamada: - clean-up leftovers in Kconfig files - remove stale oldnoconfig and silentoldconfig targets - remove unneeded cc-fullversion and cc-name variables - improve merge_config script to allow overriding option prefix * tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove cc-name variable kbuild: replace cc-name test with CONFIG_CC_IS_CLANG merge_config.sh: Allow to define config prefix kbuild: remove unused cc-fullversion variable kconfig: remove silentoldconfig target kconfig: remove oldnoconfig target powerpc: PCI_MSI needs PCI powerpc: remove CONFIG_MCA leftovers powerpc: remove CONFIG_PCI_QSPAN scsi: aha152x: rename the PCMCIA define
2018-11-03s390/qeth: report 25Gbit link speedJulian Wiedmann2-2/+20
This adds the various identifiers for 25Gbit cards, and wires them up into sysfs and ethtool. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: sanitize ARP requestsJulian Wiedmann4-79/+34
The ARP_{ADD,REMOVE}_ENTRY cmd structs contain reserved fields. Introduce a common helper that doesn't raw-copy the user-provided data into the cmd, but only sets those fields that are strictly needed for the command. This also sets the correct command length for ARP_REMOVE_ENTRY. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: fix initial operstateJulian Wiedmann4-10/+25
Setting the carrier 'on' for an unregistered netdevice doesn't update its operstate. Fix this by delaying the update until the netdevice has been registered. Fixes: 91cc98f51e3d ("s390/qeth: remove duplicated carrier state tracking") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: unregister netdevice only when registeredJulian Wiedmann3-4/+11
qeth only registers its netdevice when the qeth device is first set online. Thus a device that has never been set online will trigger a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when removed. Fix this by protecting the unregister step, just like we already protect against repeated registering of the netdevice. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Reported-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: fix HiperSockets snifferJulian Wiedmann1-3/+5
Sniffing mode for L3 HiperSockets requires that no IP addresses are registered with the HW. The preferred way to achieve this is for userspace to delete all the IPs on the interface. But qeth is expected to also tolerate a configuration where that is not the case, by skipping the IP registration when in sniffer mode. Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") reworked the IP registration logic in the L3 subdriver, this no longer works. When the qeth device is set online, qeth_l3_recover_ip() now unconditionally registers all unicast addresses from our internal IP table. While we could fix this particular problem by skipping qeth_l3_recover_ip() on a sniffer device, the more future-proof change is to skip the IP address registration at the lowest level. This way we a) catch any future code path that attempts to register an IP address without considering the sniffer scenario, and b) continue to build up our internal IP table, so that if sniffer mode is switched off later we can operate just like normal. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: sanitize strings in debug messagesJulian Wiedmann4-151/+119
As Documentation/s390/s390dbf.txt states quite clearly, using any pointer in sprinf-formatted s390dbf debug entries is dangerous. The pointers are dereferenced whenever the trace file is read from. So if the referenced data has a shorter life-time than the trace file, any read operation can result in a use-after-free. So rip out all hazardous use of indirect data, and replace any usage of dev_name() and such by the Bus ID number. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds16-50/+52
Pull more SCSI updates from James Bottomley: "This is a set of minor small (and safe changes) that didn't make the initial pull request plus some bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mvsas: Remove set but not used variable 'id' scsi: qla2xxx: Remove two arguments from qlafx00_error_entry() scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res' scsi: qla2xxx: Remove a set-but-not-used variable scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze scsi: qla2xxx: Declare local functions 'static' scsi: qla2xxx: Improve several kernel-doc headers scsi: qla2xxx: Modify fall-through annotations scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb scsi: mvsas: Use dma_pool_zalloc scsi: target: Don't request modules that aren't even built scsi: target: Set response length for REPORT TARGET PORT GROUPS
2018-11-03net: systemport: Protect stop from timeoutFlorian Fainelli1-8/+7
A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcm_sysport_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcm_sysport_netif_stop. There are currently only two users of the bcm_sysport_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcm_sysport_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcm_sysport_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcm_sysport_netif_start so it is moved into the driver open service. Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support") Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03net: bcmgenet: protect stop from timeoutDoug Berger1-6/+7
A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcmgenet_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcmgenet_netif_stop. There are currently only two users of the bcmgenet_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcmgenet_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcmgenet_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcmgenet_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcmgenet_netif_start so it is moved into the driver open service. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02net: dsa: microchip: initialize mutex before useTristram Ha1-5/+5
Initialize mutex before use. Avoid kernel complaint when CONFIG_DEBUG_LOCK_ALLOC is enabled. Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02usbnet: smsc95xx: disable carrier check while suspendingFrieder Schrempf1-0/+7
We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02clocksource/drivers/c-sky: Add gx6605s SOC system timerGuo Ren3-0/+163
The driver is for gx6605s SOC system timer and there are two same timers in gx6605s. We use one for clkevt and another one for clksrc. The timer is mmio map to access, so we need give mmio address in dts. The counter at 0x0 offset is clock event. The counter at 0x40 offset is clock source. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02clocksource/drivers/c-sky: Add C-SKY SMP timerGuo Ren3-0/+184
The driver is for C-SKY SMP timer. It only supports oneshot event and 32bit overflow for clocksource. Per cpu core has one timer and all timers share one clock-counter-input from the same clocksource. This use mfcr&mtcr instructions to access the regs. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-blockLinus Torvalds6-13/+21
Pull block layer fixes from Jens Axboe: "The biggest part of this pull request is the revert of the blkcg cleanup series. It had one fix earlier for a stacked device issue, but another one was reported. Rather than play whack-a-mole with this, revert the entire series and try again for the next kernel release. Apart from that, only small fixes/changes. Summary: - Indentation fixup for mtip32xx (Colin Ian King) - The blkcg cleanup series revert (Dennis Zhou) - Two NVMe fixes. One fixing a regression in the nvme request initialization in this merge window, causing nvme-fc to not work. The other is a suspend/resume p2p resource issue (James, Keith) - Fix sg discard merge, allowing us to merge in cases where we didn't before (Jianchao Wang) - Call rq_qos_exit() after the queue is frozen, preventing a hang (Ming) - Fix brd queue setup, fixing an oops if we fail setting up all devices (Ming)" * tag 'for-linus-20181102' of git://git.kernel.dk/linux-block: nvme-pci: fix conflicting p2p resource adds nvme-fc: fix request private initialization blkcg: revert blkcg cleanups series block: brd: associate with queue until adding disk block: call rq_qos_exit() after queue is frozen mtip32xx: clean an indentation issue, remove extraneous tabs block: fix the DISCARD request merge
2018-11-02Merge tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwmLinus Torvalds9-36/+97
Pull pwm updates from Thierry Reding: "This series contains a number of improvements to existing drivers, such as LPSS. Some drivers, such as renesas-tpu and rcar get support for more SoC generations. To round things off this fixes an issue with the sysfs interface" * tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: lpss: Only set update bit if we are actually changing the settings pwm: lpss: Force runtime-resume on suspend on Cherry Trail pwm: Enable TI ECAP driver for ARCH_K3 dt-bindings: pwm: tiecap: Add TI AM654 SoC specific compatible dt-bindings: pwm: rcar: Add r8a774a1 support pwm: Send a uevent on the pwmchip device upon channel sysfs (un)export Revert "pwm: Set class for exported channels in sysfs" dt-bindings: pwm: renesas-tpu: Document r8a7744 support dt-bindings: pwm: rcar: Add r8a7744 support dt-bindings: pwm: renesas: tpu: Document R8A779{7|8}0 bindings dt-bindings: pwm: renesas: pwm-rcar: Document R8A779{7|8}0 bindings dt-bindings: pwm: renesas: tpu: Fix "compatible" prop description pwm: Use SPDX identifier for Renesas drivers pwm: lpss: Add get_state callback pwm: lpss: Release runtime-pm reference from the driver's remove callback pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices pwm: lpss: Move struct pwm_lpss_chip definition to the header file pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices ACPI / PM: Export acpi_device_get_power() for use by modular build drivers pwm: tegra: Remove gratuituous blank line
2018-11-02soc: ti: QMSS: Fix usage of irq_set_affinity_hintMarc Zyngier3-14/+22
The Keystone QMSS driver is pretty damaged, in the sense that it does things like this: irq_set_affinity_hint(irq, to_cpumask(&cpu_map)); where cpu_map is a local variable. As we leave the function, this will point to nowhere-land, and things will end-up badly. Instead, let's use a proper cpumask that gets allocated, giving the driver a chance to actually work with things like irqbalance as well as have a hypothetical 64bit future. Cc: stable@vger.kernel.org Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-02Merge tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds2-13/+181
Pull more EDAC updates from Borislav Petkov: "The second part of the EDAC pile which contains the ADXL user and a build fix which addresses a not-so-sensical .config but fixes randconfig builds people do: - skx_edac: Address translation for NVDIMMs (Tony Luck and Qiuxu Zhuo) - ACPI_ADXL build fix" [ I don't think "sensical" is a word, particularly when used in the context of actually meaning "nonsensical", but I like it - Linus ] * tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, skx: Fix randconfig builds EDAC, skx_edac: Add address translation for non-volatile DIMMs
2018-11-02Merge tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds29-170/+287
Pull drm fixes from Dave Airlie: "Pretty much a normal fixes pull pre-rc1, mostly amdgpu fixes, one i915 link training regression fix, and a couple of minor panel/bridge fixes and a panel quirk" * tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default" drm/amd/pp: Print warning if od_sclk/mclk out of range drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10 drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7 drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled drm/amdgpu: Fix skipping hangged job reset during gpu recover. drm/amd/powerplay: revise Vega20 pptable version check drm/amd/display: set backlight level limit to 1 drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 drm/bridge: ti-sn65dsi86: Remove the mystery delay drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM drm/panel: simple: Support panels with HPD where HPD isn't connected dt-bindings: drm/panel: simple: Add no-hpd property drm/edid: Add 6 bpc quirk for BOE panel. drm/amdgpu: fix reporting of failed msg sent to SMU (v2) drm/amdgpu: Fix compute ring 1.0.0 failure after reset drm/amdgpu: fix VM leaf walking drm/amdgpu: fix amdgpu_vm_fini drm/amd/powerplay: commonize the API for retrieving current clocks ...
2018-11-02nvme-pci: fix conflicting p2p resource addsKeith Busch1-1/+4
The nvme pci driver had been adding its CMB resource to the P2P DMA subsystem everytime on on a controller reset. This results in the following warning: ------------[ cut here ]------------ nvme 0000:00:03.0: Conflicting mapping in same section WARNING: CPU: 7 PID: 81 at kernel/memremap.c:155 devm_memremap_pages+0xa6/0x380 ... Call Trace: pci_p2pdma_add_resource+0x153/0x370 nvme_reset_work+0x28c/0x17b1 [nvme] ? add_timer+0x107/0x1e0 ? dequeue_entity+0x81/0x660 ? dequeue_entity+0x3b0/0x660 ? pick_next_task_fair+0xaf/0x610 ? __switch_to+0xbc/0x410 process_one_work+0x1cf/0x350 worker_thread+0x215/0x3d0 ? process_one_work+0x350/0x350 kthread+0x107/0x120 ? kthread_park+0x80/0x80 ret_from_fork+0x1f/0x30 ---[ end trace f7ea76ac6ee72727 ]--- nvme nvme0: failed to register the CMB This patch fixes this by registering the CMB with P2P only once. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>